{
  "packId": "ham-radio-technician",
  "packName": "Ham Radio Technician License",
  "packVersion": "1.0.11",
  "description": "Prepares adults for the Technician license exam, in the question pool's own order.",
  "author": "Flash Feed",
  "language": "en",
  "tagsVocabulary": [
    "rules",
    "licensing",
    "call-signs",
    "bands",
    "privileges",
    "power",
    "emissions",
    "interference",
    "emergency",
    "operating",
    "repeaters",
    "identification",
    "control-operator",
    "third-party",
    "propagation",
    "radio-waves",
    "station-setup",
    "electrical-principles",
    "units",
    "components",
    "circuits",
    "test-equipment",
    "modulation",
    "satellites",
    "digital-modes",
    "antennas",
    "feed-lines",
    "safety",
    "rf-exposure",
    "math"
  ],
  "icon": "📻",
  "shortName": "Ham Technician",
  "lessons": [
    {
      "id": "l01-rules-licensing",
      "title": "The Rules: Licenses, Bands and Call Signs",
      "order": 1,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l01-rules-licensing.md",
      "parts": [
        {
          "id": "l01-t1a",
          "title": "Purpose, license grants and key terms",
          "order": 0,
          "blurb": "What the service is for, how a license grant is proven, and who coordinates repeaters.",
          "studyGuideAnchor": "purpose-license-grants-and-key-terms",
          "itemIds": [
            "ht-l01-f-grant-proof",
            "ht-l01-f-phonetics",
            "ht-l01-f-beacons",
            "ht-l01-f-coordinator",
            "ht-l01-d-control-operator",
            "ht-l01-d-repeater",
            "ht-l01-q-beacon-segment",
            "ht-l01-q-grant-notice",
            "ht-l01-q-repeater-channels",
            "ht-l01-tf-phonetics-encouraged",
            "ht-l01-c-licensing-database",
            "ht-l01-p-space-station",
            "ht-l01-f-fcc-role",
            "ht-l01-tf-fcc-regulates",
            "ht-l01-f-races-operator",
            "ht-l01-c-races-enrollment",
            "ht-l01-f-purpose",
            "ht-l01-f-space-station",
            "ht-l01-f-prohibited-interference",
            "ot-ht-l01-t1a01",
            "ot-ht-l01-t1a02",
            "ot-ht-l01-t1a11",
            "ot-ht-l01-t1a03",
            "ot-ht-l01-t1a07",
            "ot-ht-l01-t1a04",
            "ot-ht-l01-t1a05",
            "ot-ht-l01-t1a06",
            "ot-ht-l01-t1a08",
            "ot-ht-l01-t1a09",
            "ot-ht-l01-t1a10"
          ]
        },
        {
          "id": "l01-t1b",
          "title": "Frequency allocations, modes and power",
          "order": 1,
          "blurb": "Bands, HF phone privileges, the ISS and the power limits for Technicians.",
          "studyGuideAnchor": "frequency-allocations-modes-and-power",
          "itemIds": [
            "ht-l01-f-hf-phone",
            "ht-l01-f-six-two",
            "ht-l01-f-hf-power",
            "ht-l01-f-iss-contact",
            "ht-l01-f-iss-contact-hero",
            "ht-l01-d-pep",
            "ht-l01-d-cw",
            "ht-l01-q-hf-voice-range",
            "ht-l01-q-six-meter-freq",
            "ht-l01-q-hf-power-check",
            "ht-l01-tf-iss-general",
            "ht-l01-c-two-meter-span",
            "ht-l01-p-six-meter-morse",
            "ht-l01-f-secondary",
            "ht-l01-q-secondary-segment",
            "ht-l01-f-digital-bands",
            "ht-l01-f-cw-only",
            "ht-l01-f-band-edge",
            "ht-l01-f-ssb-above-50",
            "ht-l01-f-power-above-30",
            "ot-ht-l01-t1b03",
            "ot-ht-l01-t1b04",
            "ot-ht-l01-t1b01",
            "ot-ht-l01-t1b06",
            "ot-ht-l01-t1b05",
            "ot-ht-l01-t1b02",
            "ot-ht-l01-t1b07",
            "ot-ht-l01-t1b10",
            "ot-ht-l01-t1b08",
            "ot-ht-l01-t1b09",
            "ot-ht-l01-t1b11",
            "ot-ht-l01-t1b12"
          ]
        },
        {
          "id": "l01-t1c",
          "title": "License classes, call signs and terms",
          "order": 2,
          "blurb": "License classes, term, renewal, grace period and when a new licensee may transmit.",
          "studyGuideAnchor": "license-classes-call-signs-and-terms",
          "itemIds": [
            "ht-l01-f-license-classes",
            "ht-l01-f-term-renewal",
            "ht-l01-f-start-transmitting",
            "ht-l01-f-grace-period",
            "ht-l01-d-csce",
            "ht-l01-d-vanity-call-sign",
            "ht-l01-q-lost-classes",
            "ht-l01-q-license-length",
            "ht-l01-q-first-transmission",
            "ht-l01-tf-grace-renewal",
            "ht-l01-c-renewal-window",
            "ht-l01-p-group-d-format",
            "ht-l01-f-vessel",
            "ht-l01-tf-vessel-master",
            "ht-l01-f-email-address",
            "ht-l01-q-email-undeliverable",
            "ht-l01-f-international",
            "ht-l01-f-group-d",
            "ot-ht-l01-t1c01",
            "ot-ht-l01-t1c02",
            "ot-ht-l01-t1c05",
            "ot-ht-l01-t1c03",
            "ot-ht-l01-t1c06",
            "ot-ht-l01-t1c10",
            "ot-ht-l01-t1c08",
            "ot-ht-l01-t1c07",
            "ot-ht-l01-t1c09",
            "ot-ht-l01-t1c11",
            "ot-ht-l01-t1c04"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l01-o1",
          "statement": "Explain the purpose of the Amateur Radio Service, who regulates it, what it prohibits or encourages, and what counts as a space station",
          "demonstrationIds": [
            "d-l01-o1"
          ]
        },
        {
          "id": "obj-l01-o2",
          "statement": "Describe how a license grant is issued and proven, and how beacons, frequency coordinators and RACES operation work",
          "demonstrationIds": [
            "d-l01-o2"
          ]
        },
        {
          "id": "obj-l01-o3",
          "statement": "Identify the bands and band segments where a Technician may operate, including phone, digital and ISS contacts",
          "demonstrationIds": [
            "d-l01-o3"
          ]
        },
        {
          "id": "obj-l01-o4",
          "statement": "Explain CW-only segments, secondary allocations, band-edge practice, SSB use and the power limits for Technicians",
          "demonstrationIds": [
            "d-l01-o4"
          ]
        },
        {
          "id": "obj-l01-o5",
          "statement": "Identify the license classes the FCC issues, vanity and valid call signs, and the rules for international contacts and operating on vessels",
          "demonstrationIds": [
            "d-l01-o5"
          ]
        },
        {
          "id": "obj-l01-o6",
          "statement": "Explain when a new licensee may transmit, the license term, renewal and its grace period, and what follows if the FCC can't reach a licensee by email",
          "demonstrationIds": [
            "d-l01-o6"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l01-o1",
          "label": "Explain the service to a newcomer",
          "itemIds": [
            "ht-l01-tf-fcc-regulates",
            "ht-l01-tf-phonetics-encouraged",
            "ht-l01-p-space-station"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l01-o2",
          "label": "Know grants, beacons, repeaters and civil emergency service",
          "itemIds": [
            "ht-l01-q-grant-notice",
            "ht-l01-c-licensing-database",
            "ht-l01-q-beacon-segment",
            "ht-l01-q-repeater-channels",
            "ht-l01-c-races-enrollment"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l01-o3",
          "label": "Pick a band for a first contact",
          "itemIds": [
            "ht-l01-q-six-meter-freq",
            "ht-l01-c-two-meter-span",
            "ht-l01-q-hf-voice-range",
            "ht-l01-tf-iss-general"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l01-o4",
          "label": "Set up a legal transmission",
          "itemIds": [
            "ht-l01-p-six-meter-morse",
            "ht-l01-q-hf-power-check",
            "ht-l01-q-hf-voice-range",
            "ht-l01-q-secondary-segment"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l01-o5",
          "label": "Know your class, call sign and where you may operate",
          "itemIds": [
            "ht-l01-q-lost-classes",
            "ht-l01-p-group-d-format",
            "ht-l01-tf-vessel-master"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l01-o6",
          "label": "Plan a license renewal",
          "itemIds": [
            "ht-l01-q-first-transmission",
            "ht-l01-q-license-length",
            "ht-l01-c-renewal-window",
            "ht-l01-tf-grace-renewal",
            "ht-l01-q-email-undeliverable"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l01-o1",
          "objectiveId": "obj-l01-o1",
          "title": "Purpose, regulator and space stations",
          "mcqIds": [
            "ot-ht-l01-t1a01",
            "ot-ht-l01-t1a02",
            "ot-ht-l01-t1a11",
            "ot-ht-l01-t1a03",
            "ot-ht-l01-t1a07"
          ]
        },
        {
          "id": "test-l01-o2",
          "objectiveId": "obj-l01-o2",
          "title": "Grants, beacons and coordinators",
          "mcqIds": [
            "ot-ht-l01-t1a04",
            "ot-ht-l01-t1a05",
            "ot-ht-l01-t1a06",
            "ot-ht-l01-t1a08",
            "ot-ht-l01-t1a09",
            "ot-ht-l01-t1a10"
          ]
        },
        {
          "id": "test-l01-o3",
          "objectiveId": "obj-l01-o3",
          "title": "Bands, HF phone and the ISS",
          "mcqIds": [
            "ot-ht-l01-t1b03",
            "ot-ht-l01-t1b04",
            "ot-ht-l01-t1b01",
            "ot-ht-l01-t1b06",
            "ot-ht-l01-t1b05",
            "ot-ht-l01-t1b02"
          ]
        },
        {
          "id": "test-l01-o4",
          "objectiveId": "obj-l01-o4",
          "title": "CW segments, sharing and power",
          "mcqIds": [
            "ot-ht-l01-t1b07",
            "ot-ht-l01-t1b10",
            "ot-ht-l01-t1b08",
            "ot-ht-l01-t1b09",
            "ot-ht-l01-t1b11",
            "ot-ht-l01-t1b12"
          ]
        },
        {
          "id": "test-l01-o5",
          "objectiveId": "obj-l01-o5",
          "title": "Classes, call signs and international",
          "mcqIds": [
            "ot-ht-l01-t1c01",
            "ot-ht-l01-t1c02",
            "ot-ht-l01-t1c05",
            "ot-ht-l01-t1c03",
            "ot-ht-l01-t1c06"
          ]
        },
        {
          "id": "test-l01-o6",
          "objectiveId": "obj-l01-o6",
          "title": "Transmitting, term and renewal",
          "mcqIds": [
            "ot-ht-l01-t1c10",
            "ot-ht-l01-t1c08",
            "ot-ht-l01-t1c07",
            "ot-ht-l01-t1c09",
            "ot-ht-l01-t1c11",
            "ot-ht-l01-t1c04"
          ]
        }
      ]
    },
    {
      "id": "l02-rules-operating",
      "title": "The Rules: Operating a Station",
      "order": 2,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l02-rules-operating.md",
      "parts": [
        {
          "id": "l02-t1d",
          "title": "Authorized and prohibited transmissions",
          "order": 0,
          "blurb": "What an amateur station may and may not transmit: broadcasting, codes, music, sales, pay and tests.",
          "studyGuideAnchor": "authorized-and-prohibited-transmissions",
          "itemIds": [
            "ht-l02-f-countries-itu",
            "ht-l02-f-one-way-broadcast",
            "ht-l02-f-coded-messages",
            "ht-l02-f-music-phone",
            "ht-l02-f-selling-equipment",
            "ht-l02-f-indecent-language",
            "ht-l02-f-auxiliary-station",
            "ht-l02-f-pay-teaching",
            "ht-l02-f-news-gathering",
            "ht-l02-f-broadcasting-defined",
            "ht-l02-f-no-id-model-craft",
            "ht-l02-f-id-tests",
            "ht-l02-d-telecommand",
            "ht-l02-d-telemetry",
            "ht-l02-q-sale-announcement",
            "ht-l02-q-allowed-one-way",
            "ht-l02-q-objection-body",
            "ht-l02-q-news-safety",
            "ht-l02-tf-music-spurious",
            "ht-l02-tf-model-craft-label",
            "ht-l02-c-broadcasting",
            "ht-l02-p-music-phone",
            "ot-ht-l02-t1d01",
            "ot-ht-l02-t1d02",
            "ot-ht-l02-t1d10",
            "ot-ht-l02-t1d03",
            "ot-ht-l02-t1d04",
            "ot-ht-l02-t1d06",
            "ot-ht-l02-t1d05",
            "ot-ht-l02-t1d08",
            "ot-ht-l02-t1d09",
            "ot-ht-l02-t1d07",
            "ot-ht-l02-t1d11",
            "ot-ht-l02-t1d12"
          ]
        },
        {
          "id": "l02-t1e",
          "title": "The control operator and control types",
          "order": 1,
          "blurb": "Who must be the control operator, who designates one, and how automatic and remote control differ.",
          "studyGuideAnchor": "the-control-operator-and-control-types",
          "itemIds": [
            "ht-l02-f-control-operator-required",
            "ht-l02-f-satellite-operator",
            "ht-l02-f-who-designates",
            "ht-l02-f-privileges-class",
            "ht-l02-f-control-point",
            "ht-l02-f-extra-segments",
            "ht-l02-f-shared-responsibility",
            "ht-l02-f-automatic-control",
            "ht-l02-f-any-station-remote",
            "ht-l02-f-remote-control",
            "ht-l02-f-control-operator-role",
            "ht-l02-d-frequency-coordinator",
            "ht-l02-d-space-station",
            "ht-l02-q-designate-friend",
            "ht-l02-q-remote-operator-location",
            "ht-l02-q-satellite-requirement",
            "ht-l02-q-responsibility-both",
            "ht-l02-tf-extra-designation",
            "ht-l02-tf-automatic-no-presence",
            "ht-l02-c-privileges-source",
            "ht-l02-p-control-point",
            "ht-l02-tf-repeater-no-operator",
            "ot-ht-l02-t1e01",
            "ot-ht-l02-t1e11",
            "ot-ht-l02-t1e03",
            "ot-ht-l02-t1e07",
            "ot-ht-l02-t1e02",
            "ot-ht-l02-t1e04",
            "ot-ht-l02-t1e06",
            "ot-ht-l02-t1e05",
            "ot-ht-l02-t1e08",
            "ot-ht-l02-t1e09",
            "ot-ht-l02-t1e10"
          ]
        },
        {
          "id": "l02-t1f",
          "title": "Identification, repeaters and third parties",
          "order": 2,
          "blurb": "Inspection, identification, indicators, third-party messages, repeater accountability and club licenses.",
          "studyGuideAnchor": "identification-repeaters-and-third-parties",
          "itemIds": [
            "ht-l02-f-inspection",
            "ht-l02-f-identify-10-minutes",
            "ht-l02-f-id-language",
            "ht-l02-f-id-method",
            "ht-l02-f-indicators",
            "ht-l02-f-third-party-foreign",
            "ht-l02-f-third-party-defined",
            "ht-l02-f-repeater-defined",
            "ht-l02-f-repeater-accountability",
            "ht-l02-f-club-license",
            "ht-l02-d-beacon",
            "ht-l02-d-indicator",
            "ht-l02-q-inspection-timing",
            "ht-l02-q-tactical-call",
            "ht-l02-q-club-requirement",
            "ht-l02-q-repeater-violation",
            "ht-l02-tf-third-party-defn",
            "ht-l02-tf-phone-language",
            "ht-l02-c-club-members",
            "ht-l02-p-repeater-violation",
            "ot-ht-l02-t1f01",
            "ot-ht-l02-t1f02",
            "ot-ht-l02-t1f03",
            "ot-ht-l02-t1f04",
            "ot-ht-l02-t1f05",
            "ot-ht-l02-t1f06",
            "ot-ht-l02-t1f07",
            "ot-ht-l02-t1f08",
            "ot-ht-l02-t1f09",
            "ot-ht-l02-t1f10",
            "ot-ht-l02-t1f11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l02-o1",
          "statement": "Identify which communications an amateur station may not transmit, including broadcasting, coded messages, music and indecent language",
          "demonstrationIds": [
            "d-l02-o1"
          ]
        },
        {
          "id": "obj-l02-o2",
          "statement": "Explain when a station may be used for sale of equipment, paid operation or news support, what an auxiliary station does, and when it must identify",
          "demonstrationIds": [
            "d-l02-o2"
          ]
        },
        {
          "id": "obj-l02-o3",
          "statement": "Explain who must be the control operator of a station, who designates one, and who is responsible for its operation",
          "demonstrationIds": [
            "d-l02-o3"
          ]
        },
        {
          "id": "obj-l02-o4",
          "statement": "Describe how license class sets privileges, what a control point is, and how automatic and remote control differ",
          "demonstrationIds": [
            "d-l02-o4"
          ]
        },
        {
          "id": "obj-l02-o5",
          "statement": "Explain when, how and in what language a station must identify, and when it must be open for FCC inspection",
          "demonstrationIds": [
            "d-l02-o5"
          ]
        },
        {
          "id": "obj-l02-o6",
          "statement": "Describe third-party communications, repeater responsibility and the requirement for a club station license",
          "demonstrationIds": [
            "d-l02-o6"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l02-o1",
          "label": "Screen a planned net broadcast",
          "itemIds": [
            "ht-l02-q-objection-body",
            "ht-l02-q-allowed-one-way",
            "ht-l02-c-broadcasting",
            "ht-l02-tf-music-spurious",
            "ht-l02-p-music-phone"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l02-o2",
          "label": "Check sale ads, news support and model-craft identification",
          "itemIds": [
            "ht-l02-q-sale-announcement",
            "ht-l02-q-news-safety",
            "ht-l02-tf-model-craft-label"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l02-o3",
          "label": "Hand the station to a friend",
          "itemIds": [
            "ht-l02-tf-repeater-no-operator",
            "ht-l02-q-designate-friend",
            "ht-l02-q-responsibility-both",
            "ht-l02-q-satellite-requirement"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l02-o4",
          "label": "Set up a home station controlled over the internet",
          "itemIds": [
            "ht-l02-c-privileges-source",
            "ht-l02-tf-extra-designation",
            "ht-l02-p-control-point",
            "ht-l02-tf-automatic-no-presence",
            "ht-l02-q-remote-operator-location"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l02-o5",
          "label": "Identify correctly and be ready for inspection",
          "itemIds": [
            "ht-l02-q-inspection-timing",
            "ht-l02-q-tactical-call",
            "ht-l02-tf-phone-language"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l02-o6",
          "label": "Prepare a club's first repeater night",
          "itemIds": [
            "ht-l02-tf-third-party-defn",
            "ht-l02-q-repeater-violation",
            "ht-l02-p-repeater-violation",
            "ht-l02-q-club-requirement"
          ],
          "requiredCorrect": 4
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l02-o1",
          "objectiveId": "obj-l02-o1",
          "title": "Prohibited transmissions",
          "mcqIds": [
            "ot-ht-l02-t1d01",
            "ot-ht-l02-t1d02",
            "ot-ht-l02-t1d10",
            "ot-ht-l02-t1d03",
            "ot-ht-l02-t1d04",
            "ot-ht-l02-t1d06"
          ]
        },
        {
          "id": "test-l02-o2",
          "objectiveId": "obj-l02-o2",
          "title": "Sales, pay, news and identification",
          "mcqIds": [
            "ot-ht-l02-t1d05",
            "ot-ht-l02-t1d08",
            "ot-ht-l02-t1d09",
            "ot-ht-l02-t1d07",
            "ot-ht-l02-t1d11",
            "ot-ht-l02-t1d12"
          ]
        },
        {
          "id": "test-l02-o3",
          "objectiveId": "obj-l02-o3",
          "title": "Control operator duties",
          "mcqIds": [
            "ot-ht-l02-t1e01",
            "ot-ht-l02-t1e11",
            "ot-ht-l02-t1e03",
            "ot-ht-l02-t1e07",
            "ot-ht-l02-t1e02"
          ]
        },
        {
          "id": "test-l02-o4",
          "objectiveId": "obj-l02-o4",
          "title": "Privileges and control types",
          "mcqIds": [
            "ot-ht-l02-t1e04",
            "ot-ht-l02-t1e06",
            "ot-ht-l02-t1e05",
            "ot-ht-l02-t1e08",
            "ot-ht-l02-t1e09",
            "ot-ht-l02-t1e10"
          ]
        },
        {
          "id": "test-l02-o5",
          "objectiveId": "obj-l02-o5",
          "title": "Inspection and identification",
          "mcqIds": [
            "ot-ht-l02-t1f01",
            "ot-ht-l02-t1f02",
            "ot-ht-l02-t1f03",
            "ot-ht-l02-t1f04",
            "ot-ht-l02-t1f05",
            "ot-ht-l02-t1f06"
          ]
        },
        {
          "id": "test-l02-o6",
          "objectiveId": "obj-l02-o6",
          "title": "Third parties, repeaters and clubs",
          "mcqIds": [
            "ot-ht-l02-t1f07",
            "ot-ht-l02-t1f08",
            "ot-ht-l02-t1f09",
            "ot-ht-l02-t1f10",
            "ot-ht-l02-t1f11"
          ]
        }
      ]
    },
    {
      "id": "l03-operating-procedures",
      "title": "Operating Procedures",
      "order": 3,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l03-operating-procedures.md",
      "parts": [
        {
          "id": "l03-t2a",
          "title": "Choosing frequencies and making calls",
          "order": 0,
          "blurb": "Repeater offsets, simplex and the 2-meter calling frequency, band plans, and how to call or answer stations.",
          "studyGuideAnchor": "choosing-frequencies-and-making-calls",
          "itemIds": [
            "ht-l03-f-offset-2m",
            "ht-l03-f-offset-70cm",
            "ht-l03-f-offset-meaning",
            "ht-l03-f-calling-freq",
            "ht-l03-f-simplex",
            "ht-l03-f-band-plan",
            "ht-l03-f-cq-meaning",
            "ht-l03-f-answer-cq",
            "ht-l03-f-call-known",
            "ht-l03-f-listening",
            "ht-l03-f-seek-phone",
            "ht-l03-q-answer-cq",
            "ht-l03-q-simplex-calling",
            "ht-l03-q-band-plan",
            "ht-l03-q-seek-contact",
            "ht-l03-q-offset-70cm",
            "ht-l03-tf-listening",
            "ht-l03-tf-offset-70cm-wrong",
            "ht-l03-c-simplex",
            "ht-l03-p-cq",
            "ht-l03-d-cq",
            "ot-ht-l03-t2a01",
            "ot-ht-l03-t2a03",
            "ot-ht-l03-t2a07",
            "ot-ht-l03-t2a02",
            "ot-ht-l03-t2a11",
            "ot-ht-l03-t2a10",
            "ot-ht-l03-t2a05",
            "ot-ht-l03-t2a08",
            "ot-ht-l03-t2a04",
            "ot-ht-l03-t2a09",
            "ot-ht-l03-t2a06"
          ]
        },
        {
          "id": "l03-t2b",
          "title": "Repeater operating and access tones",
          "order": 1,
          "blurb": "Repeater access: reverse, CTCSS, DTMF, squelch, DMR talkgroups, shared channels and Q signals.",
          "studyGuideAnchor": "repeater-operating-and-access-tones",
          "itemIds": [
            "ht-l03-f-reverse",
            "ht-l03-f-ctcss",
            "ht-l03-f-linked",
            "ht-l03-f-access-causes",
            "ht-l03-f-audio-dropout",
            "ht-l03-f-dtmf",
            "ht-l03-f-talkgroup-join",
            "ht-l03-f-negotiate",
            "ht-l03-f-simplex-channels",
            "ht-l03-f-qrm",
            "ht-l03-f-qsy",
            "ht-l03-f-color-code",
            "ht-l03-f-squelch",
            "ht-l03-f-talkgroup",
            "ht-l03-d-rf",
            "ht-l03-q-dtmf",
            "ht-l03-q-reverse",
            "ht-l03-q-peaks",
            "ht-l03-q-qsy",
            "ht-l03-q-join-talkgroup",
            "ht-l03-tf-access-offset",
            "ht-l03-tf-color-health",
            "ht-l03-tf-first-rights",
            "ht-l03-c-squelch",
            "ht-l03-p-qrm",
            "ht-l03-d-qrm",
            "ht-l03-d-qsy",
            "ot-ht-l03-t2b01",
            "ot-ht-l03-t2b03",
            "ot-ht-l03-t2b04",
            "ot-ht-l03-t2b02",
            "ot-ht-l03-t2b06",
            "ot-ht-l03-t2b05",
            "ot-ht-l03-t2b13",
            "ot-ht-l03-t2b07",
            "ot-ht-l03-t2b12",
            "ot-ht-l03-t2b14",
            "ot-ht-l03-t2b08",
            "ot-ht-l03-t2b09",
            "ot-ht-l03-t2b10",
            "ot-ht-l03-t2b11"
          ]
        },
        {
          "id": "l03-t2c",
          "title": "Public service and emergency operation",
          "order": 2,
          "blurb": "FCC rules in emergencies, RACES and ARES, nets, formal traffic, phonetics and Winlink.",
          "studyGuideAnchor": "public-service-and-emergency-operation",
          "itemIds": [
            "ht-l03-f-fcc-always",
            "ht-l03-f-net-control",
            "ht-l03-f-phonetics",
            "ht-l03-f-races",
            "ht-l03-f-traffic",
            "ht-l03-f-ares",
            "ht-l03-f-net-practice",
            "ht-l03-f-winlink",
            "ht-l03-f-outside-privileges",
            "ht-l03-f-preamble",
            "ht-l03-f-check",
            "ht-l03-f-civil-defense-cert",
            "ht-l03-q-net-transmit",
            "ht-l03-q-check-count",
            "ht-l03-q-outside-privileges",
            "ht-l03-q-phonetic-scenario",
            "ht-l03-tf-races-def",
            "ht-l03-tf-ares-rules",
            "ht-l03-c-traffic",
            "ht-l03-p-winlink",
            "ot-ht-l03-t2c02",
            "ot-ht-l03-t2c07",
            "ot-ht-l03-t2c05",
            "ot-ht-l03-t2c10",
            "ot-ht-l03-t2c11",
            "ot-ht-l03-t2c03",
            "ot-ht-l03-t2c01",
            "ot-ht-l03-t2c09",
            "ot-ht-l03-t2c04",
            "ot-ht-l03-t2c06",
            "ot-ht-l03-t2c12",
            "ot-ht-l03-t2c08"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l03-o1",
          "statement": "Identify common repeater offsets, the 2-meter FM simplex calling frequency, and what simplex, repeater offset and band plans mean",
          "demonstrationIds": [
            "d-l03-o1"
          ]
        },
        {
          "id": "obj-l03-o2",
          "statement": "Explain what CQ means and how an operator answers one, calls a known station, or announces listening, on a repeater or without one",
          "demonstrationIds": [
            "d-l03-o2"
          ]
        },
        {
          "id": "obj-l03-o3",
          "statement": "Explain how repeater access works, including tones, squelch, reverse and offset, and how to fix common access and audio problems",
          "demonstrationIds": [
            "d-l03-o3"
          ]
        },
        {
          "id": "obj-l03-o4",
          "statement": "Describe DMR talkgroups and color codes, how to share frequencies and simplex channels, and what common Q signals mean",
          "demonstrationIds": [
            "d-l03-o4"
          ]
        },
        {
          "id": "obj-l03-o5",
          "statement": "Describe net operation and formal message handling: net control duties, net practice, traffic, preambles, check and phonetics",
          "demonstrationIds": [
            "d-l03-o5"
          ]
        },
        {
          "id": "obj-l03-o6",
          "statement": "Explain emergency operation: how FCC rules apply, what RACES and ARES are, and how Winlink relays messages by email",
          "demonstrationIds": [
            "d-l03-o6"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l03-o1",
          "label": "Pick a frequency for a first contact",
          "itemIds": [
            "ht-l03-q-offset-70cm",
            "ht-l03-tf-offset-70cm-wrong",
            "ht-l03-q-simplex-calling",
            "ht-l03-c-simplex",
            "ht-l03-q-band-plan"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l03-o2",
          "label": "Make a first call",
          "itemIds": [
            "ht-l03-p-cq",
            "ht-l03-q-answer-cq",
            "ht-l03-tf-listening",
            "ht-l03-q-seek-contact"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l03-o3",
          "label": "Fix a repeater access problem",
          "itemIds": [
            "ht-l03-q-reverse",
            "ht-l03-tf-access-offset",
            "ht-l03-q-dtmf",
            "ht-l03-q-peaks",
            "ht-l03-c-squelch"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l03-o4",
          "label": "Join a DMR talkgroup and move to simplex",
          "itemIds": [
            "ht-l03-q-join-talkgroup",
            "ht-l03-tf-color-health",
            "ht-l03-tf-first-rights",
            "ht-l03-q-qsy",
            "ht-l03-p-qrm"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l03-o5",
          "label": "Check into a net and pass traffic",
          "itemIds": [
            "ht-l03-q-net-transmit",
            "ht-l03-c-traffic",
            "ht-l03-q-check-count",
            "ht-l03-q-phonetic-scenario"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l03-o6",
          "label": "Prepare to serve in an emergency",
          "itemIds": [
            "ht-l03-tf-ares-rules",
            "ht-l03-q-outside-privileges",
            "ht-l03-tf-races-def",
            "ht-l03-p-winlink"
          ],
          "requiredCorrect": 4
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l03-o1",
          "objectiveId": "obj-l03-o1",
          "title": "Frequencies, offsets and band plans",
          "mcqIds": [
            "ot-ht-l03-t2a01",
            "ot-ht-l03-t2a03",
            "ot-ht-l03-t2a07",
            "ot-ht-l03-t2a02",
            "ot-ht-l03-t2a11",
            "ot-ht-l03-t2a10"
          ]
        },
        {
          "id": "test-l03-o2",
          "objectiveId": "obj-l03-o2",
          "title": "CQ and calling stations",
          "mcqIds": [
            "ot-ht-l03-t2a05",
            "ot-ht-l03-t2a08",
            "ot-ht-l03-t2a04",
            "ot-ht-l03-t2a09",
            "ot-ht-l03-t2a06"
          ]
        },
        {
          "id": "test-l03-o3",
          "objectiveId": "obj-l03-o3",
          "title": "Repeater access and audio",
          "mcqIds": [
            "ot-ht-l03-t2b01",
            "ot-ht-l03-t2b03",
            "ot-ht-l03-t2b04",
            "ot-ht-l03-t2b02",
            "ot-ht-l03-t2b06",
            "ot-ht-l03-t2b05",
            "ot-ht-l03-t2b13"
          ]
        },
        {
          "id": "test-l03-o4",
          "objectiveId": "obj-l03-o4",
          "title": "DMR, sharing and Q signals",
          "mcqIds": [
            "ot-ht-l03-t2b07",
            "ot-ht-l03-t2b12",
            "ot-ht-l03-t2b14",
            "ot-ht-l03-t2b08",
            "ot-ht-l03-t2b09",
            "ot-ht-l03-t2b10",
            "ot-ht-l03-t2b11"
          ]
        },
        {
          "id": "test-l03-o5",
          "objectiveId": "obj-l03-o5",
          "title": "Nets, traffic and phonetics",
          "mcqIds": [
            "ot-ht-l03-t2c02",
            "ot-ht-l03-t2c07",
            "ot-ht-l03-t2c05",
            "ot-ht-l03-t2c10",
            "ot-ht-l03-t2c11",
            "ot-ht-l03-t2c03"
          ]
        },
        {
          "id": "test-l03-o6",
          "objectiveId": "obj-l03-o6",
          "title": "Emergency operation",
          "mcqIds": [
            "ot-ht-l03-t2c01",
            "ot-ht-l03-t2c09",
            "ot-ht-l03-t2c04",
            "ot-ht-l03-t2c06",
            "ot-ht-l03-t2c12",
            "ot-ht-l03-t2c08"
          ]
        }
      ]
    },
    {
      "id": "l04-radio-waves",
      "title": "How Radio Waves Travel",
      "order": 4,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l04-radio-waves.md",
      "parts": [
        {
          "id": "l04-t3a",
          "title": "How radio signals travel",
          "order": 0,
          "blurb": "Multipath, fading, absorption and antenna polarization on real paths.",
          "studyGuideAnchor": "how-radio-signals-travel",
          "itemIds": [
            "ht-l04-f-multipath-fading",
            "ht-l04-f-vegetation-absorbs",
            "ht-l04-f-horizontal-weak-signal",
            "ht-l04-f-cross-polarization",
            "ht-l04-f-reflected-path",
            "ht-l04-f-picket-fencing",
            "ht-l04-f-precipitation-microwave",
            "ht-l04-f-ionospheric-fading",
            "ht-l04-f-elliptical-polarization",
            "ht-l04-f-multipath-data-errors",
            "ht-l04-f-ionosphere-reflects-hf",
            "ht-l04-f-fog-rain-6-10",
            "ht-l04-q-handheld-fade",
            "ht-l04-q-blocked-repeater",
            "ht-l04-q-multipath-data",
            "ht-l04-q-crosspol-path",
            "ht-l04-tf-fog-rain-little",
            "ht-l04-tf-vegetation-amplify",
            "ht-l04-c-ionospheric-polar",
            "ht-l04-p-picket-fencing",
            "ht-l04-tf-ionospheric-fading-cause",
            "ot-ht-l04-t3a01",
            "ot-ht-l04-t3a05",
            "ot-ht-l04-t3a06",
            "ot-ht-l04-t3a02",
            "ot-ht-l04-t3a07",
            "ot-ht-l04-t3a12",
            "ot-ht-l04-t3a03",
            "ot-ht-l04-t3a04",
            "ot-ht-l04-t3a09",
            "ot-ht-l04-t3a08",
            "ot-ht-l04-t3a10",
            "ot-ht-l04-t3a11"
          ]
        },
        {
          "id": "l04-t3b",
          "title": "Wavelength, frequency and radio waves",
          "order": 1,
          "blurb": "What a radio wave is, how fast it moves, and how wavelength ties to frequency.",
          "studyGuideAnchor": "wavelength-frequency-and-radio-waves",
          "itemIds": [
            "ht-l04-f-fields-right-angles",
            "ht-l04-f-polarization-electric",
            "ht-l04-f-two-components",
            "ht-l04-f-speed-of-light",
            "ht-l04-f-wavelength-shorter",
            "ht-l04-f-wavelength-formula",
            "ht-l04-f-band-names-wavelength",
            "ht-l04-f-vhf-range",
            "ht-l04-f-uhf-range",
            "ht-l04-f-hf-range",
            "ht-l04-f-velocity-meters",
            "ht-l04-f-same-velocity",
            "ht-l04-q-wavelength-150",
            "ht-l04-q-range-450",
            "ht-l04-q-match-polarization",
            "ht-l04-q-faster-microwaves",
            "ht-l04-tf-fields-perpendicular",
            "ht-l04-tf-divide-by-300",
            "ht-l04-c-formula-constant",
            "ht-l04-p-hf-range",
            "ot-ht-l04-t3b01",
            "ot-ht-l04-t3b02",
            "ot-ht-l04-t3b03",
            "ot-ht-l04-t3b04",
            "ot-ht-l04-t3b11",
            "ot-ht-l04-t3b12",
            "ot-ht-l04-t3b05",
            "ot-ht-l04-t3b06",
            "ot-ht-l04-t3b07",
            "ot-ht-l04-t3b08",
            "ot-ht-l04-t3b09",
            "ot-ht-l04-t3b10"
          ]
        },
        {
          "id": "l04-t3c",
          "title": "Propagation modes and the radio horizon",
          "order": 2,
          "blurb": "How signals pass the horizon: F region, scatter, diffraction and ducting.",
          "studyGuideAnchor": "propagation-modes-and-the-radio-horizon",
          "itemIds": [
            "ht-l04-f-radio-horizon-uhf",
            "ht-l04-f-hf-long-distance",
            "ht-l04-f-auroral-raspy",
            "ht-l04-f-sporadic-e",
            "ht-l04-f-knife-edge",
            "ht-l04-f-tropo-ducting",
            "ht-l04-f-meteor-scatter-6m",
            "ht-l04-f-temperature-inversion",
            "ht-l04-f-10m-f-region-timing",
            "ht-l04-f-f-region-6-10",
            "ht-l04-f-radio-horizon-refraction",
            "ht-l04-d-bandwidth",
            "ht-l04-q-f-region-timing",
            "ht-l04-q-auroral-statement",
            "ht-l04-q-ducting-cause",
            "ht-l04-q-ridge-blocks",
            "ht-l04-tf-sporadic-e-bands",
            "ht-l04-tf-meteor-two-meter",
            "ht-l04-c-f-region-partner",
            "ht-l04-p-radio-horizon",
            "ot-ht-l04-t3c01",
            "ot-ht-l04-t3c11",
            "ot-ht-l04-t3c02",
            "ot-ht-l04-t3c09",
            "ot-ht-l04-t3c10",
            "ot-ht-l04-t3c03",
            "ot-ht-l04-t3c04",
            "ot-ht-l04-t3c07",
            "ot-ht-l04-t3c05",
            "ot-ht-l04-t3c06",
            "ot-ht-l04-t3c08"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l04-o1",
          "statement": "Explain how multipath, vegetation and weather change signals on very high, ultra high and microwave frequencies along a path",
          "demonstrationIds": [
            "d-l04-o1"
          ]
        },
        {
          "id": "obj-l04-o2",
          "statement": "Describe how polarization, the ionosphere and multipath affect signal strength, fading and data errors",
          "demonstrationIds": [
            "d-l04-o2"
          ]
        },
        {
          "id": "obj-l04-o3",
          "statement": "Describe the nature of a radio wave: its electric and magnetic fields, polarization and speed in free space",
          "demonstrationIds": [
            "d-l04-o3"
          ]
        },
        {
          "id": "obj-l04-o4",
          "statement": "Relate wavelength to frequency and identify the HF, VHF and UHF ranges",
          "demonstrationIds": [
            "d-l04-o4"
          ]
        },
        {
          "id": "obj-l04-o5",
          "statement": "Explain the radio horizon, why long-distance ionospheric paths are common on HF, and when the F region carries 10-meter and 6-meter signals",
          "demonstrationIds": [
            "d-l04-o5"
          ]
        },
        {
          "id": "obj-l04-o6",
          "statement": "Identify the scatter, diffraction and tropospheric ducting modes that carry VHF and UHF signals past obstructions or the horizon, and ionospheric sporadic E",
          "demonstrationIds": [
            "d-l04-o6"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l04-o1",
          "label": "Explain what changes a signal along its path",
          "itemIds": [
            "ht-l04-q-handheld-fade",
            "ht-l04-q-blocked-repeater",
            "ht-l04-tf-vegetation-amplify",
            "ht-l04-tf-fog-rain-little"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l04-o2",
          "label": "Explain polarization, fading and data errors",
          "itemIds": [
            "ht-l04-q-crosspol-path",
            "ht-l04-c-ionospheric-polar",
            "ht-l04-q-multipath-data",
            "ht-l04-tf-ionospheric-fading-cause"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l04-o3",
          "label": "Explain a radio wave",
          "itemIds": [
            "ht-l04-tf-fields-perpendicular",
            "ht-l04-q-match-polarization",
            "ht-l04-q-faster-microwaves"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l04-o4",
          "label": "Name a band by wavelength",
          "itemIds": [
            "ht-l04-q-wavelength-150",
            "ht-l04-tf-divide-by-300",
            "ht-l04-c-formula-constant",
            "ht-l04-q-range-450",
            "ht-l04-p-hf-range"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l04-o5",
          "label": "Judge when and how far a signal can reach",
          "itemIds": [
            "ht-l04-p-radio-horizon",
            "ht-l04-q-f-region-timing",
            "ht-l04-c-f-region-partner"
          ],
          "requiredCorrect": 3
        },
        {
          "id": "d-l04-o6",
          "label": "Pick a mode for a distant signal",
          "itemIds": [
            "ht-l04-tf-sporadic-e-bands",
            "ht-l04-tf-meteor-two-meter",
            "ht-l04-q-auroral-statement",
            "ht-l04-q-ridge-blocks",
            "ht-l04-q-ducting-cause"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l04-o1",
          "objectiveId": "obj-l04-o1",
          "title": "Multipath, vegetation and weather",
          "mcqIds": [
            "ot-ht-l04-t3a01",
            "ot-ht-l04-t3a05",
            "ot-ht-l04-t3a06",
            "ot-ht-l04-t3a02",
            "ot-ht-l04-t3a07",
            "ot-ht-l04-t3a12"
          ]
        },
        {
          "id": "test-l04-o2",
          "objectiveId": "obj-l04-o2",
          "title": "Polarization and the ionosphere",
          "mcqIds": [
            "ot-ht-l04-t3a03",
            "ot-ht-l04-t3a04",
            "ot-ht-l04-t3a09",
            "ot-ht-l04-t3a08",
            "ot-ht-l04-t3a10",
            "ot-ht-l04-t3a11"
          ]
        },
        {
          "id": "test-l04-o3",
          "objectiveId": "obj-l04-o3",
          "title": "The nature of a radio wave",
          "mcqIds": [
            "ot-ht-l04-t3b01",
            "ot-ht-l04-t3b02",
            "ot-ht-l04-t3b03",
            "ot-ht-l04-t3b04",
            "ot-ht-l04-t3b11",
            "ot-ht-l04-t3b12"
          ]
        },
        {
          "id": "test-l04-o4",
          "objectiveId": "obj-l04-o4",
          "title": "Wavelength, frequency and ranges",
          "mcqIds": [
            "ot-ht-l04-t3b05",
            "ot-ht-l04-t3b06",
            "ot-ht-l04-t3b07",
            "ot-ht-l04-t3b08",
            "ot-ht-l04-t3b09",
            "ot-ht-l04-t3b10"
          ]
        },
        {
          "id": "test-l04-o5",
          "objectiveId": "obj-l04-o5",
          "title": "Radio horizon and F region paths",
          "mcqIds": [
            "ot-ht-l04-t3c01",
            "ot-ht-l04-t3c11",
            "ot-ht-l04-t3c02",
            "ot-ht-l04-t3c09",
            "ot-ht-l04-t3c10"
          ]
        },
        {
          "id": "test-l04-o6",
          "objectiveId": "obj-l04-o6",
          "title": "Scatter, diffraction and ducting",
          "mcqIds": [
            "ot-ht-l04-t3c03",
            "ot-ht-l04-t3c04",
            "ot-ht-l04-t3c07",
            "ot-ht-l04-t3c05",
            "ot-ht-l04-t3c06",
            "ot-ht-l04-t3c08"
          ]
        }
      ]
    },
    {
      "id": "l05-station-practices",
      "title": "Setting Up and Running a Station",
      "order": 5,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l05-station-practices.md",
      "parts": [
        {
          "id": "l05-t4a",
          "title": "Setting up a station",
          "order": 0,
          "blurb": "Powering, grounding and connecting a station, plus hotspots and keyers.",
          "studyGuideAnchor": "setting-up-a-station",
          "itemIds": [
            "ht-l05-f-power-rating",
            "ht-l05-f-swr-meter",
            "ht-l05-f-swr-meter-hero",
            "ht-l05-f-short-heavy-wires",
            "ht-l05-f-ft8-audio",
            "ht-l05-f-rf-power-meter",
            "ht-l05-f-interface-signals",
            "ht-l05-f-line-in",
            "ht-l05-f-bonding-strap",
            "ht-l05-f-battery-runtime",
            "ht-l05-f-hotspot",
            "ht-l05-f-negative-return",
            "ht-l05-f-electronic-keyer",
            "ht-l05-d-rtty",
            "ht-l05-q-heavy-wires",
            "ht-l05-q-negative-lead",
            "ht-l05-q-battery-time",
            "ht-l05-q-meter-place",
            "ht-l05-tf-wire-voltage-drop",
            "ht-l05-tf-hotspot-ft8",
            "ht-l05-c-bonding-strap",
            "ht-l05-p-keyer",
            "ht-l05-q-swr-choice",
            "ht-l05-q-digital-signals",
            "ht-l05-tf-line-out",
            "ot-ht-l05-t4a01",
            "ot-ht-l05-t4a03",
            "ot-ht-l05-t4a09",
            "ot-ht-l05-t4a08",
            "ot-ht-l05-t4a11",
            "ot-ht-l05-t4a05",
            "ot-ht-l05-t4a02",
            "ot-ht-l05-t4a04",
            "ot-ht-l05-t4a06",
            "ot-ht-l05-t4a07",
            "ot-ht-l05-t4a10",
            "ot-ht-l05-t4a12"
          ]
        },
        {
          "id": "l05-t4b",
          "title": "Operating controls on a radio",
          "order": 1,
          "blurb": "Radio controls for tuning, squelch, filters and gain, and DMR and D-STAR setup.",
          "studyGuideAnchor": "operating-controls-on-a-radio",
          "itemIds": [
            "ht-l05-f-mic-gain",
            "ht-l05-f-enter-frequency",
            "ht-l05-f-squelch-weak",
            "ht-l05-f-off-frequency",
            "ht-l05-f-scanning",
            "ht-l05-f-rit-clarifier",
            "ht-l05-f-code-plug",
            "ht-l05-f-filter-choice",
            "ht-l05-f-dmr-group",
            "ht-l05-f-ssb-bandwidth",
            "ht-l05-f-dstar-call-sign",
            "ht-l05-q-pitch-control",
            "ht-l05-q-weak-fm-squelch",
            "ht-l05-q-ssb-width",
            "ht-l05-q-dmr-load",
            "ht-l05-tf-gain-inversion",
            "ht-l05-tf-dstar-call",
            "ht-l05-c-dmr-group-code",
            "ht-l05-p-scanning",
            "ot-ht-l05-t4b02",
            "ot-ht-l05-t4b05",
            "ot-ht-l05-t4b03",
            "ot-ht-l05-t4b04",
            "ot-ht-l05-t4b06",
            "ot-ht-l05-t4b10",
            "ot-ht-l05-t4b01",
            "ot-ht-l05-t4b08",
            "ot-ht-l05-t4b07",
            "ot-ht-l05-t4b09",
            "ot-ht-l05-t4b11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l05-o1",
          "statement": "Explain how to power a mobile transceiver and place meters and grounds correctly in a station",
          "demonstrationIds": [
            "d-l05-o1"
          ]
        },
        {
          "id": "obj-l05-o2",
          "statement": "Describe how to connect a computer to a transceiver, how to choose a standing wave ratio (SWR) meter, and what hotspots and electronic keyers do",
          "demonstrationIds": [
            "d-l05-o2"
          ]
        },
        {
          "id": "obj-l05-o3",
          "statement": "Use frequency entry, scanning, squelch, the RIT or clarifier and SSB filter width to find and tune in stations clearly",
          "demonstrationIds": [
            "d-l05-o3"
          ]
        },
        {
          "id": "obj-l05-o4",
          "statement": "Explain microphone gain, filter bandwidth and the setup of DMR and D-STAR digital radios",
          "demonstrationIds": [
            "d-l05-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l05-o1",
          "label": "Wire up a mobile rig",
          "itemIds": [
            "ht-l05-q-heavy-wires",
            "ht-l05-q-battery-time",
            "ht-l05-q-negative-lead",
            "ht-l05-c-bonding-strap",
            "ht-l05-q-meter-place"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l05-o2",
          "label": "Connect a computer and station accessories",
          "itemIds": [
            "ht-l05-q-swr-choice",
            "ht-l05-q-digital-signals",
            "ht-l05-tf-line-out",
            "ht-l05-tf-hotspot-ft8",
            "ht-l05-p-keyer"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l05-o3",
          "label": "Tune in a weak signal",
          "itemIds": [
            "ht-l05-p-scanning",
            "ht-l05-q-weak-fm-squelch",
            "ht-l05-q-pitch-control",
            "ht-l05-q-ssb-width"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l05-o4",
          "label": "Set microphone gain and prepare a digital radio",
          "itemIds": [
            "ht-l05-tf-gain-inversion",
            "ht-l05-q-dmr-load",
            "ht-l05-c-dmr-group-code",
            "ht-l05-tf-dstar-call"
          ],
          "requiredCorrect": 4
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l05-o1",
          "objectiveId": "obj-l05-o1",
          "title": "Powering and grounding a mobile rig",
          "mcqIds": [
            "ot-ht-l05-t4a01",
            "ot-ht-l05-t4a03",
            "ot-ht-l05-t4a09",
            "ot-ht-l05-t4a08",
            "ot-ht-l05-t4a11",
            "ot-ht-l05-t4a05"
          ]
        },
        {
          "id": "test-l05-o2",
          "objectiveId": "obj-l05-o2",
          "title": "Accessories, digital links and keyers",
          "mcqIds": [
            "ot-ht-l05-t4a02",
            "ot-ht-l05-t4a04",
            "ot-ht-l05-t4a06",
            "ot-ht-l05-t4a07",
            "ot-ht-l05-t4a10",
            "ot-ht-l05-t4a12"
          ]
        },
        {
          "id": "test-l05-o3",
          "objectiveId": "obj-l05-o3",
          "title": "Tuning in stations clearly",
          "mcqIds": [
            "ot-ht-l05-t4b02",
            "ot-ht-l05-t4b05",
            "ot-ht-l05-t4b03",
            "ot-ht-l05-t4b04",
            "ot-ht-l05-t4b06",
            "ot-ht-l05-t4b10"
          ]
        },
        {
          "id": "test-l05-o4",
          "objectiveId": "obj-l05-o4",
          "title": "Microphone gain and digital radios",
          "mcqIds": [
            "ot-ht-l05-t4b01",
            "ot-ht-l05-t4b08",
            "ot-ht-l05-t4b07",
            "ot-ht-l05-t4b09",
            "ot-ht-l05-t4b11"
          ]
        }
      ]
    },
    {
      "id": "l06-electrical-basics",
      "title": "Electrical Principles: Current, Voltage and Units",
      "order": 6,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l06-electrical-basics.md",
      "parts": [
        {
          "id": "l06-t5a",
          "title": "Current, voltage and conductors",
          "order": 0,
          "blurb": "Current, voltage, power, frequency, conductors, insulators and resistance, each with its unit or term.",
          "studyGuideAnchor": "current-voltage-and-conductors",
          "itemIds": [
            "ht-l06-f-current-unit",
            "ht-l06-f-power-unit",
            "ht-l06-f-current-term",
            "ht-l06-f-frequency-term",
            "ht-l06-f-voltage-cause",
            "ht-l06-f-hertz-unit",
            "ht-l06-f-metal-conductors",
            "ht-l06-f-glass-insulator",
            "ht-l06-f-glass-insulator-hero",
            "ht-l06-f-alternating-current",
            "ht-l06-f-power-term",
            "ht-l06-f-resistance-all",
            "ht-l06-q-label-current",
            "ht-l06-q-keep-current-out",
            "ht-l06-q-quantity-unit",
            "ht-l06-q-energy-rate",
            "ht-l06-tf-resistance-all",
            "ht-l06-tf-capacitance-flow",
            "ht-l06-c-free-electrons",
            "ht-l06-p-frequency-unit",
            "ht-l06-tf-ac-zero",
            "ot-ht-l06-t5a01",
            "ot-ht-l06-t5a02",
            "ot-ht-l06-t5a06",
            "ot-ht-l06-t5a03",
            "ot-ht-l06-t5a05",
            "ot-ht-l06-t5a10",
            "ot-ht-l06-t5a07",
            "ot-ht-l06-t5a08",
            "ot-ht-l06-t5a04",
            "ot-ht-l06-t5a09",
            "ot-ht-l06-t5a11"
          ]
        },
        {
          "id": "l06-t5b",
          "title": "Unit conversions and decibels",
          "order": 1,
          "blurb": "Scaling units with milli, micro, kilo and pico; hertz steps; decibel changes in power.",
          "studyGuideAnchor": "unit-conversions-and-decibels",
          "itemIds": [
            "ht-l06-f-milliamps-amps",
            "ht-l06-f-1500-khz",
            "ht-l06-f-kilovolt",
            "ht-l06-f-microvolt",
            "ht-l06-f-milliwatts",
            "ht-l06-f-3000-milliamps",
            "ht-l06-f-megahertz-khz",
            "ht-l06-f-picofarad",
            "ht-l06-f-db-doubling",
            "ht-l06-f-db-quarter",
            "ht-l06-f-db-tenfold",
            "ht-l06-f-28-4-mhz",
            "ht-l06-f-gigahertz",
            "ht-l06-q-milliamps-to-amps",
            "ht-l06-q-picofarads-in-micro",
            "ht-l06-q-one-thousandth-prefix",
            "ht-l06-q-larger-unit-number",
            "ht-l06-q-amplifier-doubles",
            "ht-l06-tf-quarter-negative",
            "ht-l06-tf-larger-unit",
            "ht-l06-tf-kilovolt-hundred",
            "ht-l06-c-picofarad-micro",
            "ht-l06-p-microvolt",
            "ot-ht-l06-t5b01",
            "ot-ht-l06-t5b05",
            "ot-ht-l06-t5b06",
            "ot-ht-l06-t5b03",
            "ot-ht-l06-t5b04",
            "ot-ht-l06-t5b08",
            "ot-ht-l06-t5b02",
            "ot-ht-l06-t5b07",
            "ot-ht-l06-t5b12",
            "ot-ht-l06-t5b13",
            "ot-ht-l06-t5b09",
            "ot-ht-l06-t5b10",
            "ot-ht-l06-t5b11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l06-o1",
          "statement": "Identify the units and terms for current, power, voltage and frequency, and what causes electron flow",
          "demonstrationIds": [
            "d-l06-o1"
          ]
        },
        {
          "id": "obj-l06-o2",
          "statement": "Explain why metals conduct and glass insulates, and describe alternating current, its frequency and resistance",
          "demonstrationIds": [
            "d-l06-o2"
          ]
        },
        {
          "id": "obj-l06-o3",
          "statement": "Convert between metric prefixes for amperes, volts, watts and farads using milli, micro, kilo and pico",
          "demonstrationIds": [
            "d-l06-o3"
          ]
        },
        {
          "id": "obj-l06-o4",
          "statement": "Convert between hertz, kilohertz, megahertz and gigahertz and estimate decibel changes in power",
          "demonstrationIds": [
            "d-l06-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l06-o1",
          "label": "Name the quantity and unit",
          "itemIds": [
            "ht-l06-q-quantity-unit",
            "ht-l06-q-label-current",
            "ht-l06-tf-capacitance-flow",
            "ht-l06-q-energy-rate"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l06-o2",
          "label": "Know conductors, insulators, alternating current, resistance",
          "itemIds": [
            "ht-l06-q-keep-current-out",
            "ht-l06-c-free-electrons",
            "ht-l06-tf-ac-zero",
            "ht-l06-tf-resistance-all"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l06-o3",
          "label": "Convert meter and part values",
          "itemIds": [
            "ht-l06-q-milliamps-to-amps",
            "ht-l06-q-one-thousandth-prefix",
            "ht-l06-tf-kilovolt-hundred",
            "ht-l06-p-microvolt",
            "ht-l06-q-picofarads-in-micro"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l06-o4",
          "label": "Convert a frequency and gain",
          "itemIds": [
            "ht-l06-q-larger-unit-number",
            "ht-l06-tf-larger-unit",
            "ht-l06-q-amplifier-doubles",
            "ht-l06-tf-quarter-negative"
          ],
          "requiredCorrect": 4
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l06-o1",
          "objectiveId": "obj-l06-o1",
          "title": "Units and terms test",
          "mcqIds": [
            "ot-ht-l06-t5a01",
            "ot-ht-l06-t5a02",
            "ot-ht-l06-t5a06",
            "ot-ht-l06-t5a03",
            "ot-ht-l06-t5a05",
            "ot-ht-l06-t5a10"
          ]
        },
        {
          "id": "test-l06-o2",
          "objectiveId": "obj-l06-o2",
          "title": "Conductors and AC test",
          "mcqIds": [
            "ot-ht-l06-t5a07",
            "ot-ht-l06-t5a08",
            "ot-ht-l06-t5a04",
            "ot-ht-l06-t5a09",
            "ot-ht-l06-t5a11"
          ]
        },
        {
          "id": "test-l06-o3",
          "objectiveId": "obj-l06-o3",
          "title": "Metric prefix test",
          "mcqIds": [
            "ot-ht-l06-t5b01",
            "ot-ht-l06-t5b05",
            "ot-ht-l06-t5b06",
            "ot-ht-l06-t5b03",
            "ot-ht-l06-t5b04",
            "ot-ht-l06-t5b08"
          ]
        },
        {
          "id": "test-l06-o4",
          "objectiveId": "obj-l06-o4",
          "title": "Frequency and decibels test",
          "mcqIds": [
            "ot-ht-l06-t5b02",
            "ot-ht-l06-t5b07",
            "ot-ht-l06-t5b12",
            "ot-ht-l06-t5b13",
            "ot-ht-l06-t5b09",
            "ot-ht-l06-t5b10",
            "ot-ht-l06-t5b11"
          ]
        }
      ]
    },
    {
      "id": "l07-electrical-math",
      "title": "Electrical Principles: Impedance, Power and Ohm's Law",
      "order": 7,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l07-electrical-math.md",
      "parts": [
        {
          "id": "l07-t5c",
          "title": "Capacitance, inductance, impedance and power",
          "order": 0,
          "blurb": "Units for capacitance, inductance and impedance, writing kHz and MHz, and power from current and voltage.",
          "studyGuideAnchor": "capacitance-inductance-impedance-and-power",
          "itemIds": [
            "ht-l07-f-capacitance",
            "ht-l07-f-farad",
            "ht-l07-f-inductance",
            "ht-l07-f-henry",
            "ht-l07-f-impedance-unit",
            "ht-l07-f-khz",
            "ht-l07-f-mhz",
            "ht-l07-f-power-formula",
            "ht-l07-f-power-138",
            "ht-l07-f-power-30",
            "ht-l07-f-current-120w",
            "ht-l07-f-impedance-def",
            "ht-l07-q-magnetic-property",
            "ht-l07-q-impedance-unit",
            "ht-l07-q-dc-power-formula",
            "ht-l07-tf-farad-inductance",
            "ht-l07-tf-impedance-ac",
            "ht-l07-c-power-voltage",
            "ht-l07-p-magnetic-storage",
            "ht-l07-tf-khz-written",
            "ht-l07-q-power-calc",
            "ht-l07-q-current-from-power",
            "ot-ht-l07-t5c01",
            "ot-ht-l07-t5c02",
            "ot-ht-l07-t5c03",
            "ot-ht-l07-t5c04",
            "ot-ht-l07-t5c05",
            "ot-ht-l07-t5c12",
            "ot-ht-l07-t5c06",
            "ot-ht-l07-t5c07",
            "ot-ht-l07-t5c08",
            "ot-ht-l07-t5c09",
            "ot-ht-l07-t5c10",
            "ot-ht-l07-t5c11"
          ]
        },
        {
          "id": "l07-t5d",
          "title": "Ohm's law, series and parallel",
          "order": 1,
          "blurb": "Ohm's law for current, voltage and resistance, plus what stays the same in series and parallel circuits.",
          "studyGuideAnchor": "ohm-s-law-series-and-parallel",
          "itemIds": [
            "ht-l07-f-current-formula",
            "ht-l07-f-voltage-formula",
            "ht-l07-f-resistance-formula",
            "ht-l07-f-resistance-30",
            "ht-l07-f-resistance-8",
            "ht-l07-f-resistance-3",
            "ht-l07-f-current-1-5",
            "ht-l07-f-current-2",
            "ht-l07-f-current-10",
            "ht-l07-f-voltage-1",
            "ht-l07-f-voltage-10",
            "ht-l07-f-voltage-20",
            "ht-l07-f-series-current",
            "ht-l07-f-parallel-voltage",
            "ht-l07-q-voltage-formula",
            "ht-l07-q-series-meaning",
            "ht-l07-q-same-voltage-type",
            "ht-l07-q-doubled-current",
            "ht-l07-q-huge-current-mistake",
            "ht-l07-tf-parallel-voltage",
            "ht-l07-tf-series-voltage",
            "ht-l07-tf-divide-for-current",
            "ht-l07-c-resistance-current",
            "ht-l07-p-series-current",
            "ht-l07-q-resistance-calc",
            "ht-l07-q-current-calc",
            "ot-ht-l07-t5d01",
            "ot-ht-l07-t5d02",
            "ot-ht-l07-t5d03",
            "ot-ht-l07-t5d04",
            "ot-ht-l07-t5d05",
            "ot-ht-l07-t5d06",
            "ot-ht-l07-t5d07",
            "ot-ht-l07-t5d08",
            "ot-ht-l07-t5d09",
            "ot-ht-l07-t5d10",
            "ot-ht-l07-t5d11",
            "ot-ht-l07-t5d12",
            "ot-ht-l07-t5d13",
            "ot-ht-l07-t5d14"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l07-o1",
          "statement": "Identify the terms and units for capacitance, inductance and impedance, and define impedance",
          "demonstrationIds": [
            "d-l07-o1"
          ]
        },
        {
          "id": "obj-l07-o2",
          "statement": "Write frequency unit abbreviations and calculate DC power from voltage and current",
          "demonstrationIds": [
            "d-l07-o2"
          ]
        },
        {
          "id": "obj-l07-o3",
          "statement": "Choose the Ohm's law formula for current, voltage or resistance and calculate resistance",
          "demonstrationIds": [
            "d-l07-o3"
          ]
        },
        {
          "id": "obj-l07-o4",
          "statement": "Calculate current and voltage with Ohm's law and tell series from parallel circuits",
          "demonstrationIds": [
            "d-l07-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l07-o1",
          "label": "Name the component property",
          "itemIds": [
            "ht-l07-q-magnetic-property",
            "ht-l07-tf-farad-inductance",
            "ht-l07-q-impedance-unit",
            "ht-l07-tf-impedance-ac"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l07-o2",
          "label": "Write frequency units and check a radio's power draw",
          "itemIds": [
            "ht-l07-tf-khz-written",
            "ht-l07-q-dc-power-formula",
            "ht-l07-c-power-voltage",
            "ht-l07-q-power-calc",
            "ht-l07-q-current-from-power"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l07-o3",
          "label": "Pick and use the right Ohm's law formula",
          "itemIds": [
            "ht-l07-q-voltage-formula",
            "ht-l07-tf-divide-for-current",
            "ht-l07-c-resistance-current",
            "ht-l07-q-huge-current-mistake",
            "ht-l07-q-resistance-calc",
            "ht-l07-q-current-calc"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l07-o4",
          "label": "Predict a circuit's behavior",
          "itemIds": [
            "ht-l07-q-huge-current-mistake",
            "ht-l07-q-doubled-current",
            "ht-l07-q-series-meaning",
            "ht-l07-q-same-voltage-type",
            "ht-l07-tf-series-voltage",
            "ht-l07-q-current-calc"
          ],
          "requiredCorrect": 6
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l07-o1",
          "objectiveId": "obj-l07-o1",
          "title": "Capacitance, inductance, impedance",
          "mcqIds": [
            "ot-ht-l07-t5c01",
            "ot-ht-l07-t5c02",
            "ot-ht-l07-t5c03",
            "ot-ht-l07-t5c04",
            "ot-ht-l07-t5c05",
            "ot-ht-l07-t5c12"
          ]
        },
        {
          "id": "test-l07-o2",
          "objectiveId": "obj-l07-o2",
          "title": "Frequency units and power",
          "mcqIds": [
            "ot-ht-l07-t5c06",
            "ot-ht-l07-t5c07",
            "ot-ht-l07-t5c08",
            "ot-ht-l07-t5c09",
            "ot-ht-l07-t5c10",
            "ot-ht-l07-t5c11"
          ]
        },
        {
          "id": "test-l07-o3",
          "objectiveId": "obj-l07-o3",
          "title": "Ohm's law and resistance",
          "mcqIds": [
            "ot-ht-l07-t5d01",
            "ot-ht-l07-t5d02",
            "ot-ht-l07-t5d03",
            "ot-ht-l07-t5d04",
            "ot-ht-l07-t5d05",
            "ot-ht-l07-t5d06"
          ]
        },
        {
          "id": "test-l07-o4",
          "objectiveId": "obj-l07-o4",
          "title": "Current, voltage, series and parallel",
          "mcqIds": [
            "ot-ht-l07-t5d07",
            "ot-ht-l07-t5d08",
            "ot-ht-l07-t5d09",
            "ot-ht-l07-t5d10",
            "ot-ht-l07-t5d11",
            "ot-ht-l07-t5d12",
            "ot-ht-l07-t5d13",
            "ot-ht-l07-t5d14"
          ]
        }
      ]
    },
    {
      "id": "l08-components",
      "title": "Electronic Components: Parts and Semiconductors",
      "order": 8,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l08-components.md",
      "parts": [
        {
          "id": "l08-t6a",
          "title": "Resistors, capacitors, inductors and batteries",
          "order": 0,
          "blurb": "Resistors, potentiometers, capacitors, inductors, switches and rechargeable batteries.",
          "studyGuideAnchor": "resistors-capacitors-inductors-and-batteries",
          "itemIds": [
            "ht-l08-f-resistor",
            "ht-l08-f-volume-pot",
            "ht-l08-f-volume-pot-hero",
            "ht-l08-f-pot-resistance",
            "ht-l08-f-capacitor-field",
            "ht-l08-f-capacitor-build",
            "ht-l08-f-inductor-field",
            "ht-l08-f-inductor-coil",
            "ht-l08-f-inductor-coil-hero",
            "ht-l08-f-spdt",
            "ht-l08-f-switch-t2",
            "ht-l08-f-rechargeable",
            "ht-l08-f-carbon-zinc",
            "ht-l08-q-capacitor-build",
            "ht-l08-q-portable-battery",
            "ht-l08-q-two-circuits",
            "ht-l08-q-coil-part",
            "ht-l08-tf-pot-capacitance",
            "ht-l08-tf-nicad",
            "ht-l08-c-resistor",
            "ht-l08-p-inductor-field",
            "ot-ht-l08-t6a01",
            "ot-ht-l08-t6a02",
            "ot-ht-l08-t6a03",
            "ot-ht-l08-t6a04",
            "ot-ht-l08-t6a05",
            "ot-ht-l08-t6a06",
            "ot-ht-l08-t6a07",
            "ot-ht-l08-t6a08",
            "ot-ht-l08-t6a09",
            "ot-ht-l08-t6a10",
            "ot-ht-l08-t6a11"
          ]
        },
        {
          "id": "l08-t6b",
          "title": "Semiconductors: diodes and transistors",
          "order": 1,
          "blurb": "Diodes, LEDs, transistors, their electrode names, and amplifier gain.",
          "studyGuideAnchor": "semiconductors-diodes-and-transistors",
          "itemIds": [
            "ht-l08-f-diode-one-way",
            "ht-l08-f-diode-electrodes",
            "ht-l08-f-cathode-stripe",
            "ht-l08-f-forward-drop",
            "ht-l08-f-led-forward",
            "ht-l08-f-three-regions",
            "ht-l08-f-three-regions-hero",
            "ht-l08-f-transistor-switch",
            "ht-l08-f-fet-electrodes",
            "ht-l08-f-fet-abbrev",
            "ht-l08-f-bjt-electrodes",
            "ht-l08-f-power-gain",
            "ht-l08-f-gain-meaning",
            "ht-l08-q-stripe",
            "ht-l08-q-emitter-base",
            "ht-l08-q-switch-and-gain",
            "ht-l08-q-gate-drain",
            "ht-l08-tf-led-reverse",
            "ht-l08-tf-forward-drop-defect",
            "ht-l08-c-diode-one-way",
            "ht-l08-p-diode-electrodes",
            "ot-ht-l08-t6b01",
            "ot-ht-l08-t6b02",
            "ot-ht-l08-t6b06",
            "ot-ht-l08-t6b09",
            "ot-ht-l08-t6b07",
            "ot-ht-l08-t6b03",
            "ot-ht-l08-t6b04",
            "ot-ht-l08-t6b05",
            "ot-ht-l08-t6b08",
            "ot-ht-l08-t6b12",
            "ot-ht-l08-t6b10",
            "ot-ht-l08-t6b11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l08-o1",
          "statement": "Identify resistors, potentiometers, capacitors and inductors by function, construction and the energy they store",
          "demonstrationIds": [
            "d-l08-o1"
          ]
        },
        {
          "id": "obj-l08-o2",
          "statement": "Describe inductor construction, SPDT and other switch types, and which battery chemistries can be recharged",
          "demonstrationIds": [
            "d-l08-o2"
          ]
        },
        {
          "id": "obj-l08-o3",
          "statement": "Explain how diodes work, how their leads are marked and named, and how LEDs light, and name a component that can act as an electronic switch",
          "demonstrationIds": [
            "d-l08-o3"
          ]
        },
        {
          "id": "obj-l08-o4",
          "statement": "Identify transistor types and electrodes, the FET abbreviation, and what gain means in amplifiers",
          "demonstrationIds": [
            "d-l08-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l08-o1",
          "label": "Sort parts by function",
          "itemIds": [
            "ht-l08-c-resistor",
            "ht-l08-tf-pot-capacitance",
            "ht-l08-q-capacitor-build",
            "ht-l08-p-inductor-field"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l08-o2",
          "label": "Pick a switch and battery",
          "itemIds": [
            "ht-l08-q-coil-part",
            "ht-l08-q-two-circuits",
            "ht-l08-q-portable-battery",
            "ht-l08-tf-nicad"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l08-o3",
          "label": "Install a diode and LED",
          "itemIds": [
            "ht-l08-tf-forward-drop-defect",
            "ht-l08-c-diode-one-way",
            "ht-l08-q-stripe",
            "ht-l08-p-diode-electrodes",
            "ht-l08-tf-led-reverse",
            "ht-l08-q-switch-and-gain"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l08-o4",
          "label": "Read a transistor amplifier",
          "itemIds": [
            "ht-l08-q-gate-drain",
            "ht-l08-q-emitter-base",
            "ht-l08-q-switch-and-gain"
          ],
          "requiredCorrect": 3
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l08-o1",
          "objectiveId": "obj-l08-o1",
          "title": "Resistors, capacitors and inductors",
          "mcqIds": [
            "ot-ht-l08-t6a01",
            "ot-ht-l08-t6a02",
            "ot-ht-l08-t6a03",
            "ot-ht-l08-t6a04",
            "ot-ht-l08-t6a05",
            "ot-ht-l08-t6a06"
          ]
        },
        {
          "id": "test-l08-o2",
          "objectiveId": "obj-l08-o2",
          "title": "Coils, switches and batteries",
          "mcqIds": [
            "ot-ht-l08-t6a07",
            "ot-ht-l08-t6a08",
            "ot-ht-l08-t6a09",
            "ot-ht-l08-t6a10",
            "ot-ht-l08-t6a11"
          ]
        },
        {
          "id": "test-l08-o3",
          "objectiveId": "obj-l08-o3",
          "title": "Diodes, LEDs and switching",
          "mcqIds": [
            "ot-ht-l08-t6b01",
            "ot-ht-l08-t6b02",
            "ot-ht-l08-t6b06",
            "ot-ht-l08-t6b09",
            "ot-ht-l08-t6b07",
            "ot-ht-l08-t6b03"
          ]
        },
        {
          "id": "test-l08-o4",
          "objectiveId": "obj-l08-o4",
          "title": "Transistors and gain",
          "mcqIds": [
            "ot-ht-l08-t6b04",
            "ot-ht-l08-t6b05",
            "ot-ht-l08-t6b08",
            "ot-ht-l08-t6b12",
            "ot-ht-l08-t6b10",
            "ot-ht-l08-t6b11"
          ]
        }
      ]
    },
    {
      "id": "l09-schematics",
      "title": "Electronic Components: Schematics and Circuits",
      "order": 9,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l09-schematics.md",
      "parts": [
        {
          "id": "l09-t6c",
          "title": "Schematic diagrams and symbols",
          "order": 0,
          "blurb": "What a schematic shows and how to name the symbols in the three sample diagrams.",
          "studyGuideAnchor": "schematic-diagrams-and-symbols",
          "itemIds": [
            "ht-l09-f-schematic",
            "ht-l09-f-connections",
            "ht-l09-f-resistor",
            "ht-l09-f-transistor-sym",
            "ht-l09-f-lamp",
            "ht-l09-f-battery",
            "ht-l09-f-capacitor",
            "ht-l09-f-led-sym",
            "ht-l09-f-varresistor",
            "ht-l09-f-transformer-sym",
            "ht-l09-f-varinductor",
            "ht-l09-f-antenna",
            "ht-l09-q-shows",
            "ht-l09-q-variable",
            "ht-l09-q-numbers",
            "ht-l09-q-led-find",
            "ht-l09-tf-appearance",
            "ht-l09-q-antenna-find",
            "ht-l09-q-lamp-find",
            "ht-l09-q-varinductor-find",
            "ht-l09-q-transistor-find",
            "ht-l09-q-transformer-find",
            "ot-ht-l09-t6c01",
            "ot-ht-l09-t6c12",
            "ot-ht-l09-t6c02",
            "ot-ht-l09-t6c03",
            "ot-ht-l09-t6c04",
            "ot-ht-l09-t6c05",
            "ot-ht-l09-t6c06",
            "ot-ht-l09-t6c07",
            "ot-ht-l09-t6c08",
            "ot-ht-l09-t6c09",
            "ot-ht-l09-t6c10",
            "ot-ht-l09-t6c11"
          ]
        },
        {
          "id": "l09-t6d",
          "title": "Component functions and resonant circuits",
          "order": 1,
          "blurb": "What rectifiers, relays, regulators, meters and other parts do, plus tuned circuits and shielded wire.",
          "studyGuideAnchor": "component-functions-and-resonant-circuits",
          "itemIds": [
            "ht-l09-f-rectifier",
            "ht-l09-f-transformer",
            "ht-l09-f-regulator",
            "ht-l09-f-regulator-hero",
            "ht-l09-f-relay",
            "ht-l09-f-transistor-fn",
            "ht-l09-f-meter",
            "ht-l09-f-led-ind",
            "ht-l09-f-led-ind-hero",
            "ht-l09-f-ic",
            "ht-l09-f-cap-tuned",
            "ht-l09-f-resonant",
            "ht-l09-f-shield",
            "ht-l09-q-lower-ac",
            "ht-l09-q-shield",
            "ht-l09-q-relay",
            "ht-l09-q-tuned",
            "ht-l09-tf-rectifier",
            "ht-l09-tf-shield",
            "ht-l09-c-regulator",
            "ht-l09-p-ic",
            "ht-l09-c-meter",
            "ht-l09-tf-transistor",
            "ht-l09-q-led-ind",
            "ot-ht-l09-t6d01",
            "ot-ht-l09-t6d06",
            "ot-ht-l09-t6d02",
            "ot-ht-l09-t6d05",
            "ot-ht-l09-t6d04",
            "ot-ht-l09-t6d10",
            "ot-ht-l09-t6d08",
            "ot-ht-l09-t6d11",
            "ot-ht-l09-t6d03",
            "ot-ht-l09-t6d07",
            "ot-ht-l09-t6d09"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l09-o1",
          "statement": "Identify a schematic and the basic parts shown in a simple circuit diagram, such as resistors, transistors, lamps and batteries",
          "demonstrationIds": [
            "d-l09-o1"
          ]
        },
        {
          "id": "obj-l09-o2",
          "statement": "Identify the symbols for capacitors, inductors, LEDs, transformers, variable parts and antennas on a schematic",
          "demonstrationIds": [
            "d-l09-o2"
          ]
        },
        {
          "id": "obj-l09-o3",
          "statement": "Explain what rectifiers, relays, regulators, transformers, transistors and meters do in a circuit",
          "demonstrationIds": [
            "d-l09-o3"
          ]
        },
        {
          "id": "obj-l09-o4",
          "statement": "Describe resonant circuits, shielded wire, LED indicators and integrated circuits and what each is used for",
          "demonstrationIds": [
            "d-l09-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l09-o1",
          "label": "Read a simple circuit diagram",
          "itemIds": [
            "ht-l09-q-shows",
            "ht-l09-tf-appearance",
            "ht-l09-q-numbers",
            "ht-l09-q-lamp-find",
            "ht-l09-q-transistor-find"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l09-o2",
          "label": "Name parts in a radio schematic",
          "itemIds": [
            "ht-l09-q-led-find",
            "ht-l09-q-variable",
            "ht-l09-q-antenna-find",
            "ht-l09-q-varinductor-find",
            "ht-l09-q-transformer-find"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l09-o3",
          "label": "Match circuit parts to their jobs",
          "itemIds": [
            "ht-l09-q-lower-ac",
            "ht-l09-tf-rectifier",
            "ht-l09-c-regulator",
            "ht-l09-q-relay",
            "ht-l09-c-meter",
            "ht-l09-tf-transistor"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l09-o4",
          "label": "Choose parts for a small radio project",
          "itemIds": [
            "ht-l09-q-tuned",
            "ht-l09-q-shield",
            "ht-l09-tf-shield",
            "ht-l09-p-ic",
            "ht-l09-q-led-ind"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l09-o1",
          "objectiveId": "obj-l09-o1",
          "title": "Schematics and basic symbols",
          "mcqIds": [
            "ot-ht-l09-t6c01",
            "ot-ht-l09-t6c12",
            "ot-ht-l09-t6c02",
            "ot-ht-l09-t6c03",
            "ot-ht-l09-t6c04",
            "ot-ht-l09-t6c05"
          ]
        },
        {
          "id": "test-l09-o2",
          "objectiveId": "obj-l09-o2",
          "title": "More schematic symbols",
          "mcqIds": [
            "ot-ht-l09-t6c06",
            "ot-ht-l09-t6c07",
            "ot-ht-l09-t6c08",
            "ot-ht-l09-t6c09",
            "ot-ht-l09-t6c10",
            "ot-ht-l09-t6c11"
          ]
        },
        {
          "id": "test-l09-o3",
          "objectiveId": "obj-l09-o3",
          "title": "What common parts do",
          "mcqIds": [
            "ot-ht-l09-t6d01",
            "ot-ht-l09-t6d06",
            "ot-ht-l09-t6d02",
            "ot-ht-l09-t6d05",
            "ot-ht-l09-t6d04",
            "ot-ht-l09-t6d10"
          ]
        },
        {
          "id": "test-l09-o4",
          "objectiveId": "obj-l09-o4",
          "title": "Tuned circuits, shielding and ICs",
          "mcqIds": [
            "ot-ht-l09-t6d08",
            "ot-ht-l09-t6d11",
            "ot-ht-l09-t6d03",
            "ot-ht-l09-t6d07",
            "ot-ht-l09-t6d09"
          ]
        }
      ]
    },
    {
      "id": "l10-radios",
      "title": "Practical Circuits: Radios and Their Common Problems",
      "order": 10,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l10-radios.md",
      "parts": [
        {
          "id": "l10-t7a",
          "title": "Station equipment and receiver concepts",
          "order": 0,
          "blurb": "Receiver terms, circuit building blocks, and the equipment that extends a transceiver.",
          "studyGuideAnchor": "station-equipment-and-receiver-concepts",
          "itemIds": [
            "ht-l10-f-sensitivity",
            "ht-l10-f-selectivity",
            "ht-l10-f-mixer",
            "ht-l10-f-oscillator",
            "ht-l10-f-vfo",
            "ht-l10-f-modulation",
            "ht-l10-f-transceiver",
            "ht-l10-f-transceiver-hero",
            "ht-l10-f-transverter",
            "ht-l10-f-ptt",
            "ht-l10-f-rf-amp",
            "ht-l10-f-rf-amp-hero",
            "ht-l10-f-amp-switch",
            "ht-l10-q-selectivity",
            "ht-l10-q-transverter",
            "ht-l10-q-oscillator",
            "ht-l10-q-ptt",
            "ht-l10-tf-vfo",
            "ht-l10-tf-amp-switch",
            "ht-l10-c-rf-amp",
            "ht-l10-p-transverter",
            "ht-l10-tf-mixer",
            "ht-l10-c-modulation",
            "ht-l10-p-transceiver",
            "ot-ht-l10-t7a01",
            "ot-ht-l10-t7a04",
            "ot-ht-l10-t7a03",
            "ot-ht-l10-t7a05",
            "ot-ht-l10-t7a11",
            "ot-ht-l10-t7a08",
            "ot-ht-l10-t7a02",
            "ot-ht-l10-t7a06",
            "ot-ht-l10-t7a07",
            "ot-ht-l10-t7a09",
            "ot-ht-l10-t7a10"
          ]
        },
        {
          "id": "l10-t7b",
          "title": "Transmitter and receiver problems",
          "order": 1,
          "blurb": "Interference, distorted audio and low power: their causes and cures.",
          "studyGuideAnchor": "transmitter-and-receiver-problems",
          "itemIds": [
            "ht-l10-f-broadcast-rx",
            "ht-l10-f-rfi-causes",
            "ht-l10-f-swr-power",
            "ht-l10-f-antenna-filter",
            "ht-l10-f-neighbor-report",
            "ht-l10-f-band-reject",
            "ht-l10-f-neighbor-device",
            "ht-l10-f-cable-tv",
            "ht-l10-f-overdeviation",
            "ht-l10-f-repeater-audio",
            "ht-l10-f-ferrite",
            "ht-l10-f-ferrite-hero",
            "ht-l10-d-harmful-interference",
            "ht-l10-q-cable-tv",
            "ht-l10-q-overdev",
            "ht-l10-q-low-power",
            "ht-l10-q-band-reject",
            "ht-l10-tf-antenna-filter",
            "ht-l10-tf-extra-feedline",
            "ht-l10-c-choke",
            "ht-l10-p-overdev",
            "ht-l10-tf-broadcast-rx",
            "ht-l10-tf-neighbor-device",
            "ot-ht-l10-t7b02",
            "ot-ht-l10-t7b03",
            "ot-ht-l10-t7b05",
            "ot-ht-l10-t7b07",
            "ot-ht-l10-t7b06",
            "ot-ht-l10-t7b09",
            "ot-ht-l10-t7b01",
            "ot-ht-l10-t7b10",
            "ot-ht-l10-t7b04",
            "ot-ht-l10-t7b08",
            "ot-ht-l10-t7b11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l10-o1",
          "statement": "Explain basic receiver and circuit terms: sensitivity, selectivity, mixers, oscillators, VFOs and modulation",
          "demonstrationIds": [
            "d-l10-o1"
          ]
        },
        {
          "id": "obj-l10-o2",
          "statement": "Identify station equipment (transceivers, transverters, amplifiers) and describe what each does and how PTT and mode switches work",
          "demonstrationIds": [
            "d-l10-o2"
          ]
        },
        {
          "id": "obj-l10-o3",
          "statement": "Explain why a station causes interference to broadcast, TV and other receivers and how to reduce it",
          "demonstrationIds": [
            "d-l10-o3"
          ]
        },
        {
          "id": "obj-l10-o4",
          "statement": "Identify causes and cures of over-deviation, distorted audio, RF feedback on a microphone cable, low power from high SWR and interference",
          "demonstrationIds": [
            "d-l10-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l10-o1",
          "label": "Describe a receiver's key circuits",
          "itemIds": [
            "ht-l10-q-selectivity",
            "ht-l10-tf-mixer",
            "ht-l10-q-oscillator",
            "ht-l10-tf-vfo",
            "ht-l10-c-modulation"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l10-o2",
          "label": "Identify station equipment and its switches",
          "itemIds": [
            "ht-l10-p-transceiver",
            "ht-l10-q-transverter",
            "ht-l10-q-ptt",
            "ht-l10-c-rf-amp",
            "ht-l10-tf-amp-switch"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l10-o3",
          "label": "Diagnose and reduce interference to receivers",
          "itemIds": [
            "ht-l10-tf-broadcast-rx",
            "ht-l10-tf-antenna-filter",
            "ht-l10-q-band-reject",
            "ht-l10-q-cable-tv"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l10-o4",
          "label": "Troubleshoot distorted audio, low power and interference",
          "itemIds": [
            "ht-l10-q-overdev",
            "ht-l10-q-low-power",
            "ht-l10-tf-neighbor-device",
            "ht-l10-c-choke",
            "ht-l10-tf-extra-feedline"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l10-o1",
          "objectiveId": "obj-l10-o1",
          "title": "Receiver and circuit terms",
          "mcqIds": [
            "ot-ht-l10-t7a01",
            "ot-ht-l10-t7a04",
            "ot-ht-l10-t7a03",
            "ot-ht-l10-t7a05",
            "ot-ht-l10-t7a11",
            "ot-ht-l10-t7a08"
          ]
        },
        {
          "id": "test-l10-o2",
          "objectiveId": "obj-l10-o2",
          "title": "Station equipment",
          "mcqIds": [
            "ot-ht-l10-t7a02",
            "ot-ht-l10-t7a06",
            "ot-ht-l10-t7a07",
            "ot-ht-l10-t7a09",
            "ot-ht-l10-t7a10"
          ]
        },
        {
          "id": "test-l10-o3",
          "objectiveId": "obj-l10-o3",
          "title": "Interference to other receivers",
          "mcqIds": [
            "ot-ht-l10-t7b02",
            "ot-ht-l10-t7b03",
            "ot-ht-l10-t7b05",
            "ot-ht-l10-t7b07",
            "ot-ht-l10-t7b06",
            "ot-ht-l10-t7b09"
          ]
        },
        {
          "id": "test-l10-o4",
          "objectiveId": "obj-l10-o4",
          "title": "Causes and cures of problems",
          "mcqIds": [
            "ot-ht-l10-t7b01",
            "ot-ht-l10-t7b10",
            "ot-ht-l10-t7b04",
            "ot-ht-l10-t7b08",
            "ot-ht-l10-t7b11"
          ]
        }
      ]
    },
    {
      "id": "l11-measuring-testing",
      "title": "Practical Circuits: Measuring and Testing",
      "order": 11,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l11-measuring-testing.md",
      "parts": [
        {
          "id": "l11-t7c",
          "title": "Measuring and troubleshooting antennas and lines",
          "order": 0,
          "blurb": "Dummy loads, SWR readings, high SWR, coax loss and coax failure.",
          "studyGuideAnchor": "measuring-and-troubleshooting-antennas-and-lines",
          "itemIds": [
            "ht-l11-f-dummy-purpose",
            "ht-l11-f-analyzer",
            "ht-l11-f-dummy-makeup",
            "ht-l11-f-dummy-makeup-hero",
            "ht-l11-f-swr-match",
            "ht-l11-f-high-swr-cut",
            "ht-l11-f-swr-4to1",
            "ht-l11-f-line-loss-heat",
            "ht-l11-f-wattmeter",
            "ht-l11-f-coax-moisture",
            "ht-l11-f-coax-uv",
            "ht-l11-f-foam-coax",
            "ht-l11-q-test-no-signal",
            "ht-l11-q-uv-jacket",
            "ht-l11-q-swr-4to1",
            "ht-l11-q-power-fold-back",
            "ht-l11-tf-foam-loss",
            "ht-l11-tf-ohmmeter-swr",
            "ht-l11-c-swr-match",
            "ht-l11-p-dummy-parts",
            "ht-l11-q-analyzer-resonance",
            "ht-l11-c-line-loss",
            "ot-ht-l11-t7c01",
            "ot-ht-l11-t7c03",
            "ot-ht-l11-t7c02",
            "ot-ht-l11-t7c08",
            "ot-ht-l11-t7c04",
            "ot-ht-l11-t7c06",
            "ot-ht-l11-t7c05",
            "ot-ht-l11-t7c07",
            "ot-ht-l11-t7c09",
            "ot-ht-l11-t7c10",
            "ot-ht-l11-t7c11"
          ]
        },
        {
          "id": "l11-t7d",
          "title": "Test meters and soldering",
          "order": 1,
          "blurb": "What each meter measures, how it connects, and good solder joints.",
          "studyGuideAnchor": "test-meters-and-soldering",
          "itemIds": [
            "ht-l11-f-voltmeter",
            "ht-l11-f-parallel",
            "ht-l11-f-series",
            "ht-l11-f-ammeter",
            "ht-l11-f-ammeter-hero",
            "ht-l11-f-ohmmeter-how",
            "ht-l11-f-multimeter-damage",
            "ht-l11-f-multimeter-damage-hero",
            "ht-l11-f-multimeter-measures",
            "ht-l11-f-acid-solder",
            "ht-l11-f-cold-joint",
            "ht-l11-f-capacitor-ohm",
            "ht-l11-f-power-off",
            "ht-l11-q-current-series",
            "ht-l11-q-resistance-precaution",
            "ht-l11-q-capacitor-reading",
            "ht-l11-q-measure-current",
            "ht-l11-tf-acid-solder",
            "ht-l11-tf-cold-joint",
            "ht-l11-c-ohmmeter-current",
            "ht-l11-p-voltmeter",
            "ht-l11-tf-meter-damage",
            "ot-ht-l11-t7d01",
            "ot-ht-l11-t7d04",
            "ot-ht-l11-t7d07",
            "ot-ht-l11-t7d02",
            "ot-ht-l11-t7d03",
            "ot-ht-l11-t7d05",
            "ot-ht-l11-t7d06",
            "ot-ht-l11-t7d10",
            "ot-ht-l11-t7d11",
            "ot-ht-l11-t7d08",
            "ot-ht-l11-t7d09"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l11-o1",
          "statement": "Explain how dummy loads, antenna analyzers and directional wattmeters are used, and what SWR readings such as 1:1 and 4:1 mean",
          "demonstrationIds": [
            "d-l11-o1"
          ]
        },
        {
          "id": "obj-l11-o2",
          "statement": "Describe the effects of high SWR, where feed line loss goes, why coaxial cable fails, and the advantage of foam-dielectric coax",
          "demonstrationIds": [
            "d-l11-o2"
          ]
        },
        {
          "id": "obj-l11-o3",
          "statement": "Identify the meters for voltage, current and resistance, how each connects to a circuit, and how an ohmmeter measures resistance",
          "demonstrationIds": [
            "d-l11-o3"
          ]
        },
        {
          "id": "obj-l11-o4",
          "statement": "Explain safe multimeter and ohmmeter use, what an ohmmeter shows across a capacitor, and how to choose solder and judge joints",
          "demonstrationIds": [
            "d-l11-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l11-o1",
          "label": "Testing a transmitter safely",
          "itemIds": [
            "ht-l11-q-test-no-signal",
            "ht-l11-p-dummy-parts",
            "ht-l11-q-analyzer-resonance",
            "ht-l11-tf-ohmmeter-swr",
            "ht-l11-c-swr-match",
            "ht-l11-q-swr-4to1"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l11-o2",
          "label": "Choosing and inspecting coax",
          "itemIds": [
            "ht-l11-q-power-fold-back",
            "ht-l11-c-line-loss",
            "ht-l11-q-uv-jacket",
            "ht-l11-tf-foam-loss"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l11-o3",
          "label": "Measuring a circuit with a multimeter",
          "itemIds": [
            "ht-l11-q-measure-current",
            "ht-l11-p-voltmeter",
            "ht-l11-q-current-series",
            "ht-l11-c-ohmmeter-current"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l11-o4",
          "label": "Checking a part and soldering it",
          "itemIds": [
            "ht-l11-tf-meter-damage",
            "ht-l11-q-resistance-precaution",
            "ht-l11-q-capacitor-reading",
            "ht-l11-tf-acid-solder",
            "ht-l11-tf-cold-joint"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l11-o1",
          "objectiveId": "obj-l11-o1",
          "title": "Dummy loads, analyzers and SWR",
          "mcqIds": [
            "ot-ht-l11-t7c01",
            "ot-ht-l11-t7c03",
            "ot-ht-l11-t7c02",
            "ot-ht-l11-t7c08",
            "ot-ht-l11-t7c04",
            "ot-ht-l11-t7c06"
          ]
        },
        {
          "id": "test-l11-o2",
          "objectiveId": "obj-l11-o2",
          "title": "High SWR, feed line loss and coax",
          "mcqIds": [
            "ot-ht-l11-t7c05",
            "ot-ht-l11-t7c07",
            "ot-ht-l11-t7c09",
            "ot-ht-l11-t7c10",
            "ot-ht-l11-t7c11"
          ]
        },
        {
          "id": "test-l11-o3",
          "objectiveId": "obj-l11-o3",
          "title": "Meters and connections",
          "mcqIds": [
            "ot-ht-l11-t7d01",
            "ot-ht-l11-t7d04",
            "ot-ht-l11-t7d07",
            "ot-ht-l11-t7d02",
            "ot-ht-l11-t7d03",
            "ot-ht-l11-t7d05"
          ]
        },
        {
          "id": "test-l11-o4",
          "objectiveId": "obj-l11-o4",
          "title": "Safe meter use and soldering",
          "mcqIds": [
            "ot-ht-l11-t7d06",
            "ot-ht-l11-t7d10",
            "ot-ht-l11-t7d11",
            "ot-ht-l11-t7d08",
            "ot-ht-l11-t7d09"
          ]
        }
      ]
    },
    {
      "id": "l12-modes-satellites",
      "title": "Signals and Emissions: Modes and Satellites",
      "order": 12,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l12-modes-satellites.md",
      "parts": [
        {
          "id": "l12-t8a",
          "title": "Modulation modes and bandwidth",
          "order": 0,
          "blurb": "Which modes suit repeaters and weak signals, and how wide each signal is.",
          "studyGuideAnchor": "modulation-modes-and-bandwidth",
          "itemIds": [
            "ht-l12-f-ssb-am",
            "ht-l12-f-fm-pm-packet-repeater",
            "ht-l12-f-ssb-weak-signal",
            "ht-l12-f-upper-sideband",
            "ht-l12-f-ssb-narrower",
            "ht-l12-f-fm-one-signal",
            "ht-l12-f-cw-narrowest",
            "ht-l12-f-cw-150-hz",
            "ht-l12-f-ssb-3-khz",
            "ht-l12-f-fm-10-15-khz",
            "ht-l12-f-tv-6-mhz",
            "ht-l12-q-weak-signal-mode",
            "ht-l12-q-tv-bandwidth",
            "ht-l12-q-ssb-3-khz",
            "ht-l12-q-repeater-modulation",
            "ht-l12-tf-lower-sideband",
            "ht-l12-tf-ssb-less-space",
            "ht-l12-c-cw-bandwidth",
            "ht-l12-p-fm-repeater-width",
            "ht-l12-tf-ssb-is-am",
            "ht-l12-q-narrowest-signal",
            "ht-l12-tf-fm-one-signal",
            "ot-ht-l12-t8a01",
            "ot-ht-l12-t8a02",
            "ot-ht-l12-t8a04",
            "ot-ht-l12-t8a03",
            "ot-ht-l12-t8a06",
            "ot-ht-l12-t8a07",
            "ot-ht-l12-t8a05",
            "ot-ht-l12-t8a08",
            "ot-ht-l12-t8a11",
            "ot-ht-l12-t8a09",
            "ot-ht-l12-t8a10",
            "ot-ht-l12-t8a12"
          ]
        },
        {
          "id": "l12-t8b",
          "title": "Amateur satellite operation",
          "order": 1,
          "blurb": "What satellites send, how to track them, and how to set uplink power.",
          "studyGuideAnchor": "amateur-satellite-operation",
          "itemIds": [
            "ht-l12-f-beacon-telemetry",
            "ht-l12-f-beacon-defined",
            "ht-l12-f-tracking-outputs",
            "ht-l12-f-keplerian-input",
            "ht-l12-f-doppler-shift",
            "ht-l12-f-spin-fading",
            "ht-l12-f-satellite-modes",
            "ht-l12-f-u-v-mode",
            "ht-l12-f-leo-orbit",
            "ht-l12-f-telemetry-anyone",
            "ht-l12-f-excess-erp",
            "ht-l12-f-uplink-check",
            "ht-l12-d-earth-station",
            "ht-l12-d-erp",
            "ht-l12-q-pass-times",
            "ht-l12-q-fading-rotation",
            "ht-l12-q-overdriven-uplink",
            "ht-l12-q-u-v-bands",
            "ht-l12-tf-telemetry-key",
            "ht-l12-tf-leo-elevation",
            "ht-l12-c-keplerian",
            "ht-l12-p-spin-fading-cause",
            "ht-l12-q-beacon-content",
            "ht-l12-q-uplink-level",
            "ht-l12-tf-satellite-modes",
            "ht-l12-q-doppler-scenario",
            "ot-ht-l12-t8b01",
            "ot-ht-l12-t8b05",
            "ot-ht-l12-t8b03",
            "ot-ht-l12-t8b06",
            "ot-ht-l12-t8b02",
            "ot-ht-l12-t8b12",
            "ot-ht-l12-t8b04",
            "ot-ht-l12-t8b08",
            "ot-ht-l12-t8b10",
            "ot-ht-l12-t8b07",
            "ot-ht-l12-t8b09",
            "ot-ht-l12-t8b11"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l12-o1",
          "statement": "Identify the modulation used for SSB, FM, packet and repeaters, the sideband for weak-signal VHF and UHF work, and how SSB compares with FM",
          "demonstrationIds": [
            "d-l12-o1"
          ]
        },
        {
          "id": "obj-l12-o2",
          "statement": "Compare the bandwidths of CW, SSB, FM voice and fast-scan TV, and name a disadvantage of FM versus SSB",
          "demonstrationIds": [
            "d-l12-o2"
          ]
        },
        {
          "id": "obj-l12-o3",
          "statement": "Explain what satellite beacons, telemetry and tracking programs provide, and how to set uplink power properly",
          "demonstrationIds": [
            "d-l12-o3"
          ]
        },
        {
          "id": "obj-l12-o4",
          "statement": "Describe satellite modes, bands, orbits, Doppler shift and spin fading, and who may receive telemetry",
          "demonstrationIds": [
            "d-l12-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l12-o1",
          "label": "Pick a mode for the contact",
          "itemIds": [
            "ht-l12-q-weak-signal-mode",
            "ht-l12-tf-lower-sideband",
            "ht-l12-q-repeater-modulation",
            "ht-l12-tf-ssb-less-space",
            "ht-l12-tf-ssb-is-am"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l12-o2",
          "label": "Rank signals by bandwidth",
          "itemIds": [
            "ht-l12-q-narrowest-signal",
            "ht-l12-c-cw-bandwidth",
            "ht-l12-q-ssb-3-khz",
            "ht-l12-p-fm-repeater-width",
            "ht-l12-q-tv-bandwidth",
            "ht-l12-tf-fm-one-signal"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l12-o3",
          "label": "Prepare for a satellite pass",
          "itemIds": [
            "ht-l12-q-beacon-content",
            "ht-l12-q-pass-times",
            "ht-l12-c-keplerian",
            "ht-l12-q-overdriven-uplink",
            "ht-l12-q-uplink-level"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l12-o4",
          "label": "Explain what a listener hears",
          "itemIds": [
            "ht-l12-q-u-v-bands",
            "ht-l12-tf-leo-elevation",
            "ht-l12-q-fading-rotation",
            "ht-l12-q-doppler-scenario",
            "ht-l12-tf-satellite-modes",
            "ht-l12-tf-telemetry-key"
          ],
          "requiredCorrect": 6
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l12-o1",
          "objectiveId": "obj-l12-o1",
          "title": "Modes and sidebands",
          "mcqIds": [
            "ot-ht-l12-t8a01",
            "ot-ht-l12-t8a02",
            "ot-ht-l12-t8a04",
            "ot-ht-l12-t8a03",
            "ot-ht-l12-t8a06",
            "ot-ht-l12-t8a07"
          ]
        },
        {
          "id": "test-l12-o2",
          "objectiveId": "obj-l12-o2",
          "title": "Signal bandwidths",
          "mcqIds": [
            "ot-ht-l12-t8a05",
            "ot-ht-l12-t8a08",
            "ot-ht-l12-t8a11",
            "ot-ht-l12-t8a09",
            "ot-ht-l12-t8a10",
            "ot-ht-l12-t8a12"
          ]
        },
        {
          "id": "test-l12-o3",
          "objectiveId": "obj-l12-o3",
          "title": "Beacons, tracking and uplink power",
          "mcqIds": [
            "ot-ht-l12-t8b01",
            "ot-ht-l12-t8b05",
            "ot-ht-l12-t8b03",
            "ot-ht-l12-t8b06",
            "ot-ht-l12-t8b02",
            "ot-ht-l12-t8b12"
          ]
        },
        {
          "id": "test-l12-o4",
          "objectiveId": "obj-l12-o4",
          "title": "Satellite modes, orbits and fading",
          "mcqIds": [
            "ot-ht-l12-t8b04",
            "ot-ht-l12-t8b08",
            "ot-ht-l12-t8b10",
            "ot-ht-l12-t8b07",
            "ot-ht-l12-t8b09",
            "ot-ht-l12-t8b11"
          ]
        }
      ]
    },
    {
      "id": "l13-digital-modes",
      "title": "Signals and Emissions: Contests, Linking and Digital Modes",
      "order": 13,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l13-digital-modes.md",
      "parts": [
        {
          "id": "l13-t8c",
          "title": "Direction finding, contests and internet linking",
          "order": 0,
          "blurb": "Finding hidden signals, contest manners, grid locators and linking stations through the internet.",
          "studyGuideAnchor": "direction-finding-contests-and-internet-linking",
          "itemIds": [
            "ht-l13-f-direction-finding",
            "ht-l13-f-hunt-antenna",
            "ht-l13-f-hunt-antenna-hero",
            "ht-l13-f-contesting",
            "ht-l13-f-contest-practice",
            "ht-l13-f-grid-locator",
            "ht-l13-f-irlp-access",
            "ht-l13-f-voip",
            "ht-l13-f-irlp",
            "ht-l13-f-echolink",
            "ht-l13-f-echolink-register",
            "ht-l13-f-gateway",
            "ht-l13-q-irlp-handheld",
            "ht-l13-q-echolink-start",
            "ht-l13-q-gateway",
            "ht-l13-q-contest-scene",
            "ht-l13-tf-grid-locator",
            "ht-l13-tf-contest-twice",
            "ht-l13-c-direction-finding",
            "ht-l13-p-gateway",
            "ht-l13-tf-voip",
            "ot-ht-l13-t8c01",
            "ot-ht-l13-t8c02",
            "ot-ht-l13-t8c03",
            "ot-ht-l13-t8c04",
            "ot-ht-l13-t8c05",
            "ot-ht-l13-t8c06",
            "ot-ht-l13-t8c08",
            "ot-ht-l13-t8c07",
            "ot-ht-l13-t8c09",
            "ot-ht-l13-t8c10",
            "ot-ht-l13-t8c11"
          ]
        },
        {
          "id": "l13-t8d",
          "title": "Digital and non-voice modes",
          "order": 1,
          "blurb": "Digital and non-voice modes: FT8, PSK, CW, NTSC, packet radio, APRS, DMR and mesh networks.",
          "studyGuideAnchor": "digital-and-non-voice-modes",
          "itemIds": [
            "ht-l13-f-digital-modes",
            "ht-l13-f-ft8",
            "ht-l13-f-ft8-hero",
            "ht-l13-f-aprs-data",
            "ht-l13-f-ntsc",
            "ht-l13-f-aprs-use",
            "ht-l13-f-psk",
            "ht-l13-f-dmr",
            "ht-l13-f-packet-contents",
            "ht-l13-f-cw",
            "ht-l13-f-wsjtx",
            "ht-l13-f-arq",
            "ht-l13-f-mesh",
            "ht-l13-q-arq-scene",
            "ht-l13-q-dmr-channel",
            "ht-l13-q-aprs-map",
            "ht-l13-q-mesh-scene",
            "ht-l13-tf-ntsc",
            "ht-l13-tf-aprs-data",
            "ht-l13-c-mesh-wifi",
            "ht-l13-p-cw",
            "ht-l13-tf-ft8-mode",
            "ht-l13-tf-psk",
            "ht-l13-tf-wsjtx",
            "ot-ht-l13-t8d01",
            "ot-ht-l13-t8d02",
            "ot-ht-l13-t8d10",
            "ot-ht-l13-t8d06",
            "ot-ht-l13-t8d09",
            "ot-ht-l13-t8d04",
            "ot-ht-l13-t8d03",
            "ot-ht-l13-t8d05",
            "ot-ht-l13-t8d08",
            "ot-ht-l13-t8d11",
            "ot-ht-l13-t8d07",
            "ot-ht-l13-t8d12"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l13-o1",
          "statement": "Explain how direction finding, contests and grid locators are used in operating activities, including good contest practice",
          "demonstrationIds": [
            "d-l13-o1"
          ]
        },
        {
          "id": "obj-l13-o2",
          "statement": "Describe how IRLP, EchoLink, VoIP and gateways link amateur stations over the internet, and how to access them",
          "demonstrationIds": [
            "d-l13-o2"
          ]
        },
        {
          "id": "obj-l13-o3",
          "statement": "Identify common digital and non-voice modes and terms, including FT8, WSJT-X, PSK, CW and NTSC",
          "demonstrationIds": [
            "d-l13-o3"
          ]
        },
        {
          "id": "obj-l13-o4",
          "statement": "Describe how APRS, packet radio, ARQ, DMR and mesh networks send and protect data",
          "demonstrationIds": [
            "d-l13-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l13-o1",
          "label": "Hidden transmitter hunt and contest",
          "itemIds": [
            "ht-l13-c-direction-finding",
            "ht-l13-q-contest-scene",
            "ht-l13-tf-contest-twice",
            "ht-l13-tf-grid-locator"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l13-o2",
          "label": "Linking through the internet",
          "itemIds": [
            "ht-l13-q-irlp-handheld",
            "ht-l13-tf-voip",
            "ht-l13-q-echolink-start",
            "ht-l13-q-gateway",
            "ht-l13-p-gateway"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l13-o3",
          "label": "Choosing a digital mode",
          "itemIds": [
            "ht-l13-tf-ft8-mode",
            "ht-l13-tf-wsjtx",
            "ht-l13-tf-psk",
            "ht-l13-p-cw",
            "ht-l13-tf-ntsc"
          ],
          "requiredCorrect": 5
        },
        {
          "id": "d-l13-o4",
          "label": "Explaining digital networks",
          "itemIds": [
            "ht-l13-q-aprs-map",
            "ht-l13-tf-aprs-data",
            "ht-l13-q-arq-scene",
            "ht-l13-q-dmr-channel",
            "ht-l13-q-mesh-scene"
          ],
          "requiredCorrect": 5
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l13-o1",
          "objectiveId": "obj-l13-o1",
          "title": "Direction finding and contests",
          "mcqIds": [
            "ot-ht-l13-t8c01",
            "ot-ht-l13-t8c02",
            "ot-ht-l13-t8c03",
            "ot-ht-l13-t8c04",
            "ot-ht-l13-t8c05"
          ]
        },
        {
          "id": "test-l13-o2",
          "objectiveId": "obj-l13-o2",
          "title": "Linking through the internet",
          "mcqIds": [
            "ot-ht-l13-t8c06",
            "ot-ht-l13-t8c08",
            "ot-ht-l13-t8c07",
            "ot-ht-l13-t8c09",
            "ot-ht-l13-t8c10",
            "ot-ht-l13-t8c11"
          ]
        },
        {
          "id": "test-l13-o3",
          "objectiveId": "obj-l13-o3",
          "title": "Digital and non-voice modes",
          "mcqIds": [
            "ot-ht-l13-t8d01",
            "ot-ht-l13-t8d02",
            "ot-ht-l13-t8d10",
            "ot-ht-l13-t8d06",
            "ot-ht-l13-t8d09",
            "ot-ht-l13-t8d04"
          ]
        },
        {
          "id": "test-l13-o4",
          "objectiveId": "obj-l13-o4",
          "title": "APRS, packet, DMR and mesh",
          "mcqIds": [
            "ot-ht-l13-t8d03",
            "ot-ht-l13-t8d05",
            "ot-ht-l13-t8d08",
            "ot-ht-l13-t8d11",
            "ot-ht-l13-t8d07",
            "ot-ht-l13-t8d12"
          ]
        }
      ]
    },
    {
      "id": "l14-antennas-feed-lines",
      "title": "Antennas and Feed Lines",
      "order": 14,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l14-antennas-feed-lines.md",
      "parts": [
        {
          "id": "l14-t9a",
          "title": "Antenna types, polarization and gain",
          "order": 0,
          "blurb": "Beam antennas, gain, polarization, loading, length versus frequency, and handheld and mobile antennas.",
          "studyGuideAnchor": "antenna-types-polarization-and-gain",
          "itemIds": [
            "ht-l14-f-beam",
            "ht-l14-f-gain",
            "ht-l14-f-yagi",
            "ht-l14-f-yagi-hero",
            "ht-l14-f-polarization",
            "ht-l14-f-loading",
            "ht-l14-f-dipole-length",
            "ht-l14-f-quarter-wave",
            "ht-l14-f-handheld",
            "ht-l14-f-handheld-hero",
            "ht-l14-f-vehicle",
            "ht-l14-f-five-eighths",
            "ht-l14-f-dipole-pattern",
            "ht-l14-q-vehicle",
            "ht-l14-q-raise-frequency",
            "ht-l14-q-whip-advantage",
            "ht-l14-q-lengthening",
            "ht-l14-tf-pattern",
            "ht-l14-tf-quarter-wave",
            "ht-l14-c-efficiency",
            "ht-l14-p-gain",
            "ht-l14-q-most-gain",
            "ht-l14-tf-polarization",
            "ot-ht-l14-t9a01",
            "ot-ht-l14-t9a06",
            "ot-ht-l14-t9a11",
            "ot-ht-l14-t9a02",
            "ot-ht-l14-t9a03",
            "ot-ht-l14-t9a05",
            "ot-ht-l14-t9a08",
            "ot-ht-l14-t9a04",
            "ot-ht-l14-t9a07",
            "ot-ht-l14-t9a09",
            "ot-ht-l14-t9a10"
          ]
        },
        {
          "id": "l14-t9b",
          "title": "Feed lines, standing waves and connectors",
          "order": 1,
          "blurb": "Coax impedance and loss, feed line types, connectors, standing wave ratio, tuners and erratic readings.",
          "studyGuideAnchor": "feed-lines-standing-waves-and-connectors",
          "itemIds": [
            "ht-l14-f-taped",
            "ht-l14-f-coax-impedance",
            "ht-l14-f-coax-popular",
            "ht-l14-f-swr",
            "ht-l14-f-tuner",
            "ht-l14-f-loss-frequency",
            "ht-l14-f-type-n",
            "ht-l14-f-type-n-hero",
            "ht-l14-f-pl259",
            "ht-l14-f-loss-sources",
            "ht-l14-f-erratic-swr",
            "ht-l14-f-rg213",
            "ht-l14-f-hardline",
            "ht-l14-q-type-n",
            "ht-l14-q-tuner",
            "ht-l14-q-rg-compare",
            "ht-l14-q-erratic",
            "ht-l14-tf-water",
            "ht-l14-tf-pl259-watertight",
            "ht-l14-c-impedance",
            "ht-l14-p-type-n",
            "ot-ht-l14-t9b02",
            "ot-ht-l14-t9b03",
            "ot-ht-l14-t9b01",
            "ot-ht-l14-t9b06",
            "ot-ht-l14-t9b07",
            "ot-ht-l14-t9b10",
            "ot-ht-l14-t9b11",
            "ot-ht-l14-t9b04",
            "ot-ht-l14-t9b12",
            "ot-ht-l14-t9b05",
            "ot-ht-l14-t9b08",
            "ot-ht-l14-t9b09"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l14-o1",
          "statement": "Explain antenna polarization, gain and loading, and identify which antenna types give the most gain",
          "demonstrationIds": [
            "d-l14-o1"
          ]
        },
        {
          "id": "obj-l14-o2",
          "statement": "Describe how length sets resonant frequency and how common portable, mobile and dipole antennas perform",
          "demonstrationIds": [
            "d-l14-o2"
          ]
        },
        {
          "id": "obj-l14-o3",
          "statement": "Identify the usual impedance of coax and why it is the most common feed line, the main connectors and their weatherproofing, and how feed lines compare",
          "demonstrationIds": [
            "d-l14-o3"
          ]
        },
        {
          "id": "obj-l14-o4",
          "statement": "Explain SWR, feed line loss and the role of an antenna tuner, and name causes of loss and SWR changes",
          "demonstrationIds": [
            "d-l14-o4"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l14-o1",
          "label": "Compare antenna choices",
          "itemIds": [
            "ht-l14-p-gain",
            "ht-l14-q-lengthening",
            "ht-l14-q-most-gain",
            "ht-l14-tf-polarization"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l14-o2",
          "label": "Choose, size and place antennas",
          "itemIds": [
            "ht-l14-q-raise-frequency",
            "ht-l14-q-vehicle",
            "ht-l14-q-whip-advantage",
            "ht-l14-tf-pattern"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l14-o3",
          "label": "Choose coax and connectors",
          "itemIds": [
            "ht-l14-c-impedance",
            "ht-l14-q-type-n",
            "ht-l14-tf-pl259-watertight",
            "ht-l14-q-rg-compare"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l14-o4",
          "label": "Troubleshoot a station",
          "itemIds": [
            "ht-l14-q-tuner",
            "ht-l14-tf-water",
            "ht-l14-q-erratic"
          ],
          "requiredCorrect": 3
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l14-o1",
          "objectiveId": "obj-l14-o1",
          "title": "Gain, polarization and loading",
          "mcqIds": [
            "ot-ht-l14-t9a01",
            "ot-ht-l14-t9a06",
            "ot-ht-l14-t9a11",
            "ot-ht-l14-t9a02",
            "ot-ht-l14-t9a03"
          ]
        },
        {
          "id": "test-l14-o2",
          "objectiveId": "obj-l14-o2",
          "title": "Length, handhelds and dipoles",
          "mcqIds": [
            "ot-ht-l14-t9a05",
            "ot-ht-l14-t9a08",
            "ot-ht-l14-t9a04",
            "ot-ht-l14-t9a07",
            "ot-ht-l14-t9a09",
            "ot-ht-l14-t9a10"
          ]
        },
        {
          "id": "test-l14-o3",
          "objectiveId": "obj-l14-o3",
          "title": "Coax and connectors",
          "mcqIds": [
            "ot-ht-l14-t9b02",
            "ot-ht-l14-t9b03",
            "ot-ht-l14-t9b01",
            "ot-ht-l14-t9b06",
            "ot-ht-l14-t9b07",
            "ot-ht-l14-t9b10",
            "ot-ht-l14-t9b11"
          ]
        },
        {
          "id": "test-l14-o4",
          "objectiveId": "obj-l14-o4",
          "title": "SWR, loss and tuners",
          "mcqIds": [
            "ot-ht-l14-t9b04",
            "ot-ht-l14-t9b12",
            "ot-ht-l14-t9b05",
            "ot-ht-l14-t9b08",
            "ot-ht-l14-t9b09"
          ]
        }
      ]
    },
    {
      "id": "l15-safety",
      "title": "Safety",
      "order": 15,
      "studyGuidePath": "/packs/ham-radio-technician/guides/l15-safety.md",
      "parts": [
        {
          "id": "l15-t0a",
          "title": "Electrical hazards and battery safety",
          "order": 0,
          "blurb": "Battery, shock, fuse, wiring, arrester and ground hazards at a station.",
          "studyGuideAnchor": "electrical-hazards-and-battery-safety",
          "itemIds": [
            "ht-l15-f-battery-short",
            "ht-l15-f-battery-charging",
            "ht-l15-f-body-current",
            "ht-l15-f-shock-guard",
            "ht-l15-f-stored-charge",
            "ht-l15-f-voltmeter-rating",
            "ht-l15-f-fuse-purpose",
            "ht-l15-f-fuse-purpose-hero",
            "ht-l15-f-fuse-sizing",
            "ht-l15-f-black-wire",
            "ht-l15-f-fuse-placement",
            "ht-l15-f-arrester-place",
            "ht-l15-f-ground-rods",
            "ht-l15-q-fuse-fire",
            "ht-l15-q-arrester-spot",
            "ht-l15-q-stored-charge",
            "ht-l15-q-rod-bonding",
            "ht-l15-tf-supply-charge",
            "ht-l15-tf-big-fuse",
            "ht-l15-c-fuse-hot",
            "ht-l15-p-black-wire",
            "ht-l15-tf-battery-short",
            "ht-l15-tf-current-ways",
            "ot-ht-l15-t0a01",
            "ot-ht-l15-t0a10",
            "ot-ht-l15-t0a02",
            "ot-ht-l15-t0a06",
            "ot-ht-l15-t0a11",
            "ot-ht-l15-t0a12",
            "ot-ht-l15-t0a04",
            "ot-ht-l15-t0a05",
            "ot-ht-l15-t0a03",
            "ot-ht-l15-t0a08",
            "ot-ht-l15-t0a07",
            "ot-ht-l15-t0a09"
          ]
        },
        {
          "id": "l15-t0b",
          "title": "Antenna and tower safety",
          "order": 1,
          "blurb": "Tower climbing, power lines, guy-line turnbuckles and tower grounding.",
          "studyGuideAnchor": "antenna-and-tower-safety",
          "itemIds": [
            "ht-l15-f-tower-ground-wires",
            "ht-l15-f-climbing-needs",
            "ht-l15-f-no-solo-climb",
            "ht-l15-f-overhead-wires",
            "ht-l15-f-turnbuckle-wire",
            "ht-l15-f-power-line-distance",
            "ht-l15-f-crank-up",
            "ht-l15-f-crank-up-hero",
            "ht-l15-f-tower-ground-rods",
            "ht-l15-f-utility-pole",
            "ht-l15-f-utility-pole-hero",
            "ht-l15-f-sharp-bends",
            "ht-l15-f-local-codes",
            "ht-l15-d-faa",
            "ht-l15-q-power-line",
            "ht-l15-q-turnbuckle",
            "ht-l15-q-tower-ground",
            "ht-l15-q-overhead",
            "ht-l15-tf-sharp-bends",
            "ht-l15-tf-low-climb",
            "ht-l15-c-crank-lock",
            "ht-l15-p-tower-rods",
            "ot-ht-l15-t0b02",
            "ot-ht-l15-t0b03",
            "ot-ht-l15-t0b07",
            "ot-ht-l15-t0b04",
            "ot-ht-l15-t0b06",
            "ot-ht-l15-t0b09",
            "ot-ht-l15-t0b01",
            "ot-ht-l15-t0b10",
            "ot-ht-l15-t0b08",
            "ot-ht-l15-t0b11",
            "ot-ht-l15-t0b05"
          ]
        },
        {
          "id": "l15-t0c",
          "title": "Radio frequency exposure",
          "order": 2,
          "blurb": "Non-ionizing RF, exposure factors, duty cycle, RF burns and compliance.",
          "studyGuideAnchor": "radio-frequency-exposure",
          "itemIds": [
            "ht-l15-f-nonionizing",
            "ht-l15-f-rf-vs-ionizing",
            "ht-l15-f-exposure-factors",
            "ht-l15-f-freq-limits",
            "ht-l15-f-lowest-mpe",
            "ht-l15-f-duty-cycle-def",
            "ht-l15-f-duty-cycle-why",
            "ht-l15-f-duty-cycle-power",
            "ht-l15-f-rf-burn",
            "ht-l15-f-compliance-methods",
            "ht-l15-f-staying-compliant",
            "ht-l15-f-reduce-exposure",
            "ht-l15-f-licensee-duty",
            "ht-l15-q-duty-half",
            "ht-l15-q-touch-antenna",
            "ht-l15-q-licensee",
            "ht-l15-q-recompliance",
            "ht-l15-q-limit-reason",
            "ht-l15-tf-rf-limited",
            "ht-l15-tf-low-freq-energy",
            "ht-l15-tf-modeling",
            "ht-l15-c-avg-exposure",
            "ht-l15-p-duty-cycle",
            "ot-ht-l15-t0c01",
            "ot-ht-l15-t0c12",
            "ot-ht-l15-t0c02",
            "ot-ht-l15-t0c05",
            "ot-ht-l15-t0c04",
            "ot-ht-l15-t0c07",
            "ot-ht-l15-t0c03",
            "ot-ht-l15-t0c10",
            "ot-ht-l15-t0c11",
            "ot-ht-l15-t0c06",
            "ot-ht-l15-t0c09",
            "ot-ht-l15-t0c08",
            "ot-ht-l15-t0c13"
          ]
        }
      ],
      "objectives": [
        {
          "id": "obj-l15-o1",
          "statement": "Identify battery hazards, how current through the body harms it, and how to guard against shock and stored charge in station equipment",
          "demonstrationIds": [
            "d-l15-o1"
          ]
        },
        {
          "id": "obj-l15-o2",
          "statement": "Explain what fuses do and how they are sized, how AC wiring is fused and colored, and how grounds and lightning arresters protect a station",
          "demonstrationIds": [
            "d-l15-o2"
          ]
        },
        {
          "id": "obj-l15-o3",
          "statement": "Describe safe practices for climbing towers, and for keeping antennas clear of power lines and off utility poles",
          "demonstrationIds": [
            "d-l15-o3"
          ]
        },
        {
          "id": "obj-l15-o4",
          "statement": "Explain how to ground a tower for lightning protection, and why guy-line turnbuckles are secured with safety wire",
          "demonstrationIds": [
            "d-l15-o4"
          ]
        },
        {
          "id": "obj-l15-o5",
          "statement": "Explain why RF radiation is non-ionizing, what affects exposure and can cause RF burns, and why exposure limits vary with frequency",
          "demonstrationIds": [
            "d-l15-o5"
          ]
        },
        {
          "id": "obj-l15-o6",
          "statement": "Describe how duty cycle affects RF exposure and how a licensee shows and keeps RF safety compliance",
          "demonstrationIds": [
            "d-l15-o6"
          ]
        }
      ],
      "demonstrations": [
        {
          "id": "d-l15-o1",
          "label": "Safe bench check",
          "itemIds": [
            "ht-l15-tf-battery-short",
            "ht-l15-tf-current-ways",
            "ht-l15-q-stored-charge",
            "ht-l15-tf-supply-charge"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l15-o2",
          "label": "Station protection plan",
          "itemIds": [
            "ht-l15-q-fuse-fire",
            "ht-l15-tf-big-fuse",
            "ht-l15-c-fuse-hot",
            "ht-l15-p-black-wire",
            "ht-l15-q-arrester-spot",
            "ht-l15-q-rod-bonding"
          ],
          "requiredCorrect": 6
        },
        {
          "id": "d-l15-o3",
          "label": "Pre-climb safety check",
          "itemIds": [
            "ht-l15-tf-low-climb",
            "ht-l15-c-crank-lock",
            "ht-l15-q-overhead",
            "ht-l15-q-power-line"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l15-o4",
          "label": "Tower grounding setup",
          "itemIds": [
            "ht-l15-tf-sharp-bends",
            "ht-l15-q-tower-ground",
            "ht-l15-p-tower-rods",
            "ht-l15-q-turnbuckle"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l15-o5",
          "label": "Explaining RF exposure",
          "itemIds": [
            "ht-l15-tf-rf-limited",
            "ht-l15-q-limit-reason",
            "ht-l15-tf-low-freq-energy",
            "ht-l15-q-touch-antenna"
          ],
          "requiredCorrect": 4
        },
        {
          "id": "d-l15-o6",
          "label": "Station RF evaluation",
          "itemIds": [
            "ht-l15-q-duty-half",
            "ht-l15-c-avg-exposure",
            "ht-l15-p-duty-cycle",
            "ht-l15-tf-modeling",
            "ht-l15-q-recompliance",
            "ht-l15-q-licensee"
          ],
          "requiredCorrect": 6
        }
      ],
      "objectiveTests": [
        {
          "id": "test-l15-o1",
          "objectiveId": "obj-l15-o1",
          "title": "Battery and shock safety",
          "mcqIds": [
            "ot-ht-l15-t0a01",
            "ot-ht-l15-t0a10",
            "ot-ht-l15-t0a02",
            "ot-ht-l15-t0a06",
            "ot-ht-l15-t0a11",
            "ot-ht-l15-t0a12"
          ]
        },
        {
          "id": "test-l15-o2",
          "objectiveId": "obj-l15-o2",
          "title": "Fuses, wiring and grounds",
          "mcqIds": [
            "ot-ht-l15-t0a04",
            "ot-ht-l15-t0a05",
            "ot-ht-l15-t0a03",
            "ot-ht-l15-t0a08",
            "ot-ht-l15-t0a07",
            "ot-ht-l15-t0a09"
          ]
        },
        {
          "id": "test-l15-o3",
          "objectiveId": "obj-l15-o3",
          "title": "Climbing and power lines",
          "mcqIds": [
            "ot-ht-l15-t0b02",
            "ot-ht-l15-t0b03",
            "ot-ht-l15-t0b07",
            "ot-ht-l15-t0b04",
            "ot-ht-l15-t0b06",
            "ot-ht-l15-t0b09"
          ]
        },
        {
          "id": "test-l15-o4",
          "objectiveId": "obj-l15-o4",
          "title": "Tower grounding and turnbuckles",
          "mcqIds": [
            "ot-ht-l15-t0b01",
            "ot-ht-l15-t0b10",
            "ot-ht-l15-t0b08",
            "ot-ht-l15-t0b11",
            "ot-ht-l15-t0b05"
          ]
        },
        {
          "id": "test-l15-o5",
          "objectiveId": "obj-l15-o5",
          "title": "RF radiation and exposure",
          "mcqIds": [
            "ot-ht-l15-t0c01",
            "ot-ht-l15-t0c12",
            "ot-ht-l15-t0c02",
            "ot-ht-l15-t0c05",
            "ot-ht-l15-t0c04",
            "ot-ht-l15-t0c07"
          ]
        },
        {
          "id": "test-l15-o6",
          "objectiveId": "obj-l15-o6",
          "title": "Duty cycle and compliance",
          "mcqIds": [
            "ot-ht-l15-t0c03",
            "ot-ht-l15-t0c10",
            "ot-ht-l15-t0c11",
            "ot-ht-l15-t0c06",
            "ot-ht-l15-t0c09",
            "ot-ht-l15-t0c08",
            "ot-ht-l15-t0c13"
          ]
        }
      ]
    }
  ],
  "items": [
    {
      "id": "ht-l01-f-grant-proof",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Proof of a License Grant",
      "body": "After a candidate passes the exam, the official notice is an email from the Federal Communications Commission (FCC) with a link to download the license grant. What proves the grant exists is the license appearing in the **Universal Licensing System (ULS)** database.",
      "uid": "1sq47nl8onvmp"
    },
    {
      "id": "ht-l01-f-phonetics",
      "shape": "fact",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "title": "Phonetic Alphabet Is Encouraged",
      "body": "A station may identify itself by a **phone** emission in the English language. The rules encourage a phonetic alphabet as an aid for correct station identification when using phone emissions.",
      "uid": "5no3ij180nxwn"
    },
    {
      "id": "ht-l01-f-beacons",
      "shape": "fact",
      "tags": [
        "bands",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.203 Beacon station",
        "url": "https://www.ecfr.gov/current/title-47/section-97.203"
      },
      "title": "Beacons on Ten Meters",
      "body": "The rules allow a **beacon** to be automatically controlled on certain segments. Among the high frequency (HF) bands, the range of 3-30 megahertz (MHz), automatically controlled amateur propagation beacons are found on ten meters, from 28.200 MHz to 28.300 MHz.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal frequency axis in megahertz (MHz) zoomed in on ten meters, with tick marks at 28.200, 28.300 and 28.500 MHz. A highlighted block from 28.200 to 28.300 MHz is labeled as the beacon segment, with a small simple mast-and-wave icon above it to suggest an automatic transmitter. Directly to its right, a separate block from 28.300 to 28.500 MHz is labeled as the phone range. A small caption at the top places ten meters within the high frequency range of 3-30 MHz.",
        "imageSearchTerm": "Where beacons sit on ten meters",
        "alt": "Where beacons sit on ten meters: the narrow slice of the ten-meter band where automatically controlled propagation beacons are found, next to the phone range just above it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-beacons.f7d4b50e.webp"
      },
      "uid": "h4l5g31glo0nv"
    },
    {
      "id": "ht-l01-f-coordinator",
      "shape": "fact",
      "tags": [
        "repeaters",
        "interference"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "Who Picks Repeater Channels",
      "body": "A **frequency coordinator** recommends transmit/receive channels for repeater and auxiliary stations, to avoid or minimize potential interference. Amateur operators in the local or regional area whose stations are eligible select the coordinator.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A top-to-bottom chain of three boxes. The top box is a cluster of simple generic station icons for local or regional amateur operators whose stations are eligible to be repeater or auxiliary stations. An arrow marked 'select' points down to the middle box, the volunteer frequency coordinator. A second arrow marked 'recommends' points down to the bottom box, which shows a pair of channel tags marked transmit and receive for repeater and auxiliary stations.",
        "imageSearchTerm": "Who picks the coordinator, and what the coordinator does",
        "alt": "Who picks the coordinator, and what the coordinator does: the two-step chain: local amateurs select the coordinator, and the coordinator recommends repeater and auxiliary channels.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-coordinator.5a26587a.webp"
      },
      "uid": "1ktgnpr1xu77tp"
    },
    {
      "id": "ht-l01-d-control-operator",
      "shape": "definition",
      "tags": [
        "control-operator",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Control operator"
      },
      "definition": {
        "modality": "text",
        "value": "An amateur operator the station's licensee designates to be responsible for its transmissions and rule compliance",
        "short": "Responsible for station transmissions"
      },
      "uid": "fxb6vjqffqs5"
    },
    {
      "id": "ht-l01-d-repeater",
      "shape": "definition",
      "tags": [
        "repeaters",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Repeater"
      },
      "definition": {
        "modality": "text",
        "value": "A station that simultaneously retransmits another amateur station's signal on a different channel or channels",
        "short": "Retransmits another station's signal"
      },
      "uid": "1633abz1jcdoh9"
    },
    {
      "id": "ht-l01-q-beacon-segment",
      "shape": "mcq",
      "tags": [
        "bands",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.203 Beacon station",
        "url": "https://www.ecfr.gov/current/title-47/section-97.203"
      },
      "prompt": {
        "modality": "text",
        "value": "On the high frequency (HF) bands, where are automatically controlled propagation beacons found? Ranges are in megahertz (MHz)."
      },
      "options": [
        {
          "modality": "text",
          "value": "28.300 to 28.500 MHz"
        },
        {
          "modality": "text",
          "value": "7.025 to 7.125 MHz"
        },
        {
          "modality": "text",
          "value": "28.200 to 28.300 MHz"
        },
        {
          "modality": "text",
          "value": "21.025 to 21.200 MHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "Automatically controlled propagation beacons are found on ten meters between 28.200 and 28.300 MHz. The 28.300 to 28.500 MHz range is the Technician phone segment, which is the nearest tempting choice.",
      "uid": "noyag4a0r01u"
    },
    {
      "id": "ht-l01-q-grant-notice",
      "shape": "mcq",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "After a candidate passes the exam, how does the Federal Communications Commission (FCC) officially announce the new license and call sign?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An FCC email with a download link",
          "short": "Email from FCC with link"
        },
        {
          "modality": "text",
          "value": "A paper license mailed by the FCC",
          "short": "Paper license mailed by FCC"
        },
        {
          "modality": "text",
          "value": "An email from the lead volunteer examiner",
          "short": "Email from lead examiner"
        },
        {
          "modality": "text",
          "value": "A letter from the lead volunteer examiner",
          "short": "Letter from lead examiner"
        }
      ],
      "correctIndex": 0,
      "explanation": "The official notice is an email from the FCC with a link to download the license grant. A paper license by mail, or an email or letter from the lead volunteer examiner, is not the official notice.",
      "uid": "1qcmmpf45mz9l"
    },
    {
      "id": "ht-l01-q-repeater-channels",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "interference"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "prompt": {
        "modality": "text",
        "value": "A new repeater needs channels that avoid or minimize interference. Who recommends them?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A civil defense organization"
        },
        {
          "modality": "text",
          "value": "A federal regional field office"
        },
        {
          "modality": "text",
          "value": "The licensee of the repeater"
        },
        {
          "modality": "text",
          "value": "A volunteer frequency coordinator",
          "short": "A volunteer frequency coordinator"
        }
      ],
      "correctIndex": 3,
      "explanation": "A Volunteer Frequency Coordinator recognized by local amateurs recommends repeater channels, to avoid or minimize potential interference.",
      "uid": "ed5qoc1krvl5s"
    },
    {
      "id": "ht-l01-tf-phonetics-encouraged",
      "shape": "trueFalse",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "statement": "The rules encourage using a phonetic alphabet to help identify a station correctly when using phone emissions.",
      "isTrue": true,
      "why": "A phonetic alphabet is encouraged as an aid to correct identification on phone. It is not required for emergency messages or for contact with foreign stations.",
      "uid": "1u9k6vlgoh1vd"
    },
    {
      "id": "ht-l01-c-licensing-database",
      "shape": "cloze",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A license grant is proven when the license appears in the Federal Communications Commission (FCC) ___ database.",
      "answer": "Universal Licensing System",
      "distractors": [
        "Equipment Authorization System",
        "Electronic Comment Filing System",
        "Commission Registration System"
      ],
      "explanation": "The license appearing in the Universal Licensing System (ULS) database is what proves the FCC issued the grant. A printed examination certificate does not prove it.",
      "uid": "hygr5kp782tq"
    },
    {
      "id": "ht-l01-p-space-station",
      "shape": "pair",
      "tags": [
        "satellites",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "sideA": {
        "modality": "text",
        "value": "Space station"
      },
      "sideB": {
        "modality": "text",
        "value": "Station over 50 kilometers up"
      },
      "uid": "onwdsh1qy3lg9"
    },
    {
      "id": "ht-l01-f-hf-phone",
      "shape": "fact",
      "tags": [
        "privileges",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A horizontal bar chart on a frequency axis in megahertz (MHz). Four segments are marked: 80 meters, 40 meters, 15 meters and 10 meters. Inside the 10-meter segment, mark the phone range. Add a note at the chart's foot stating the power limit for these segments.",
        "imageSearchTerm": "Technician HF segments and power limit",
        "alt": "The four high frequency (HF) segments open to Technicians, on 80, 40, 15 and 10 meters, with phone only on 10 meters and a 200-watt peak envelope power limit.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-hf-phone.fbde0098.webp"
      },
      "title": "HF Phone Only on 10 Meters",
      "body": "Technician licensees have phone privileges on high frequency (HF) only on the **10-meter band**. The phone range available to them is 28.300 megahertz (MHz) to 28.500 MHz.",
      "uid": "1fiufs2jifnis"
    },
    {
      "id": "ht-l01-f-six-two",
      "shape": "fact",
      "tags": [
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "title": "The 6-Meter and 2-Meter Bands",
      "body": "The **6-meter band** spans 50-54 megahertz (MHz), so 52.525 MHz is in it. The 2-meter band spans 144-148 MHz, and it includes 146.52 MHz.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two horizontal band bars stacked one above the other, each on its own frequency axis in megahertz (MHz). The top bar is the 6-meter band from 50 to 54 MHz, with a pin marker at 52.525 MHz. The bottom bar is the 2-meter band from 144 to 148 MHz, with a pin marker at 146.52 MHz. Draw the two axes separately, or use a clear axis break, so the 50 and 144 MHz bands are not on one misleading continuous scale.",
        "imageSearchTerm": "The 6-meter and 2-meter bands",
        "alt": "The 6-meter band, 50 to 54 megahertz (MHz), with 52.525 MHz marked, and the 2-meter band, 144 to 148 MHz, with 146.52 MHz marked.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-six-two.8465c9b4.webp"
      },
      "uid": "1v7can6bwrtji"
    },
    {
      "id": "ht-l01-f-hf-power",
      "shape": "fact",
      "tags": [
        "power",
        "privileges"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.313 Transmitter power standards",
        "url": "https://www.ecfr.gov/current/title-47/section-97.313"
      },
      "title": "200 Watts PEP on HF",
      "body": "In their high frequency (HF) segments, Technician class operators may not exceed 200 watts of **peak envelope power (PEP)**. The limit applies on 3.525-3.60, 7.025-7.125, 21.025-21.20 and 28.0-28.5 megahertz (MHz).",
      "uid": "1vtb0pe4muwlk"
    },
    {
      "id": "ht-l01-f-iss-contact",
      "shape": "fact",
      "tags": [
        "satellites",
        "privileges"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "imagePrompt": "An astronaut talking on the amateur radio station aboard the International Space Station.",
        "imageSearchTerm": "ARISS amateur radio ISS astronaut",
        "alt": "European Space Agency astronaut Thomas Pesquet using the handset of the amateur radio station aboard the International Space Station.",
        "kind": "photo",
        "credit": "Wikimedia Commons · NASA Johnson Space Center · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Thomas_Pesquet_and_Amateur_Radio_on_ISS_(ARISS)_(iss066e031742).jpg",
        "subject": "ESA astronaut Thomas Pesquet holding the handset of the amateur radio station (ARISS) aboard the International Space Station.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-iss-contact.1d930b7f.webp"
      },
      "title": "Contacting the Space Station",
      "body": "Any amateur with a Technician class or higher license may contact the International Space Station (ISS) on very high frequency (VHF) bands. VHF is the range 30-300 megahertz (MHz). The **ISS** is a space station.",
      "uid": "13b9n8v844w47"
    },
    {
      "id": "ht-l01-f-iss-contact-hero",
      "shape": "fact",
      "title": "Calling the Space Station",
      "body": "Any amateur with a Technician class or higher license may contact the International Space Station (ISS) on very high frequency (VHF) bands, which span 30 to 300 megahertz (MHz).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "satellites",
        "privileges"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "An astronaut talking on the amateur radio station aboard the International Space Station.",
        "imageSearchTerm": "ARISS amateur radio ISS astronaut",
        "alt": "European Space Agency astronaut Thomas Pesquet using the handset of the amateur radio station aboard the International Space Station.",
        "kind": "photo",
        "credit": "Wikimedia Commons · NASA Johnson Space Center · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Thomas_Pesquet_and_Amateur_Radio_on_ISS_(ARISS)_(iss066e031742).jpg",
        "subject": "ESA astronaut Thomas Pesquet holding the handset of the amateur radio station (ARISS) aboard the International Space Station.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-iss-contact.1d930b7f.webp"
      },
      "uid": "12un7cfvl3t2b"
    },
    {
      "id": "ht-l01-d-pep",
      "shape": "definition",
      "tags": [
        "power",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "PEP"
      },
      "definition": {
        "modality": "text",
        "value": "Peak envelope power: average power fed to the antenna line during one radio frequency (RF) cycle at the modulation crest",
        "short": "Power at the modulation crest"
      },
      "uid": "xaboszd69vgp"
    },
    {
      "id": "ht-l01-d-cw",
      "shape": "definition",
      "tags": [
        "emissions",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "CW"
      },
      "definition": {
        "modality": "text",
        "value": "International Morse code telegraphy emissions, together with certain defined designators",
        "short": "International Morse code telegraphy"
      },
      "uid": "7a4kji158x372"
    },
    {
      "id": "ht-l01-q-hf-voice-range",
      "shape": "mcq",
      "tags": [
        "privileges",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "prompt": {
        "modality": "text",
        "value": "A Technician licensee wants to use voice on a high frequency (HF) band. Which range, in megahertz (MHz), is open for phone?"
      },
      "options": [
        {
          "modality": "text",
          "value": "7.025 to 7.125"
        },
        {
          "modality": "text",
          "value": "28.300 to 28.500"
        },
        {
          "modality": "text",
          "value": "3.525 to 3.600"
        },
        {
          "modality": "text",
          "value": "21.025 to 21.200"
        }
      ],
      "correctIndex": 1,
      "explanation": "Technician phone privileges on HF are on 10 meters only, at 28.300 to 28.500 MHz. The 80-, 40- and 15-meter segments are Technician HF segments, but they carry no phone privileges.",
      "uid": "1mlj5f11uw48vh"
    },
    {
      "id": "ht-l01-q-six-meter-freq",
      "shape": "mcq",
      "tags": [
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "prompt": {
        "modality": "text",
        "value": "A radio is tuned to 52.525 megahertz (MHz). Which amateur band is that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "6 meters"
        },
        {
          "modality": "text",
          "value": "2 meters"
        },
        {
          "modality": "text",
          "value": "10 meters"
        },
        {
          "modality": "text",
          "value": "70 centimeters"
        }
      ],
      "correctIndex": 0,
      "explanation": "The 6-meter band spans 50-54 MHz, so 52.525 MHz is inside it. The 2-meter band is 144-148 MHz, far higher.",
      "uid": "1dn0e6f1h8k28p"
    },
    {
      "id": "ht-l01-q-hf-power-check",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.313 Transmitter power standards",
        "url": "https://www.ecfr.gov/current/title-47/section-97.313"
      },
      "prompt": {
        "modality": "text",
        "value": "A Technician's transmitter puts out 250 watts peak envelope power (PEP) in the 15-meter band's high frequency (HF) segment. How does that compare with the limit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Within the limit; 500 watts is the cap",
          "short": "Within; 500 watts is the cap"
        },
        {
          "modality": "text",
          "value": "Over the limit; 100 watts is the cap",
          "short": "Over; 100 watts is the cap"
        },
        {
          "modality": "text",
          "value": "Within the limit; 1500 watts is the cap",
          "short": "Within; 1500 watts is the cap"
        },
        {
          "modality": "text",
          "value": "Over the limit; 200 watts is the cap",
          "short": "Over; 200 watts is the cap"
        }
      ],
      "correctIndex": 3,
      "explanation": "Technician operators may not exceed 200 watts PEP in their HF segments, so 250 watts is over. The 1500 watt figure applies above 30 megahertz, not on HF.",
      "uid": "sb5m80cnks4i"
    },
    {
      "id": "ht-l01-tf-iss-general",
      "shape": "trueFalse",
      "tags": [
        "satellites",
        "privileges"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Contacting the International Space Station (ISS) on very high frequency (VHF) bands requires a General class or higher license.",
      "isTrue": false,
      "why": "Any amateur with a Technician class or higher license may contact the International Space Station on VHF bands. No General class license is needed.",
      "uid": "s2sfh61izi02a"
    },
    {
      "id": "ht-l01-c-two-meter-span",
      "shape": "cloze",
      "tags": [
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "template": "The 2-meter band spans ___ megahertz (MHz).",
      "answer": "144-148",
      "distractors": [
        "50-54",
        "28.0-28.5",
        "21.025-21.200"
      ],
      "explanation": "The 2-meter band spans 144-148 MHz and includes 146.52 MHz. The 50-54 MHz range is the 6-meter band.",
      "uid": "qtudhw1pbmziw"
    },
    {
      "id": "ht-l01-p-six-meter-morse",
      "shape": "pair",
      "tags": [
        "emissions",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.305 Authorized emission types",
        "url": "https://www.ecfr.gov/current/title-47/section-97.305"
      },
      "sideA": {
        "modality": "text",
        "value": "6 m segment limited to Morse code (CW)"
      },
      "sideB": {
        "modality": "text",
        "value": "50.0 to 50.1 megahertz"
      },
      "uid": "1nnfmf21vnru2m"
    },
    {
      "id": "ht-l01-f-license-classes",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.17 Application for new license grant",
        "url": "https://www.ecfr.gov/current/title-47/section-97.17"
      },
      "title": "Classes Issued as of 2026",
      "body": "As of 2026, the Federal Communications Commission (FCC) issues new licenses only for **Technician**, General and Amateur Extra. No new license grant is issued for a Novice or Advanced Class operator/primary station.",
      "uid": "15dxpm81g12qqk"
    },
    {
      "id": "ht-l01-f-term-renewal",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool (T1C07, T1C08); 47 CFR § 97.25, § 1.949",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal timeline. Start at the grant with a 10-year term running to the expiration date. A bracket just before the expiration date marks the 90-day renewal window, which ends at the expiration date. After the expiration date, a 2-year grace period follows. Mark that no privileges apply until the grant is renewed.",
        "imageSearchTerm": "How a license term runs",
        "alt": "How a license term runs: the order of the 10-year term, the renewal window, the expiration date and the 2-year grace period, and when privileges stop.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-term-renewal.ad514137.webp"
      },
      "title": "Ten-Year Term, 90-Day Window",
      "body": "An amateur service license is normally granted for a **10-year term**. A renewal application must be filed no later than the expiration date and no sooner than 90 days before it.",
      "uid": "1el3jw3nccroj"
    },
    {
      "id": "ht-l01-f-start-transmitting",
      "shape": "fact",
      "tags": [
        "licensing",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.5 Station license required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.5"
      },
      "title": "When Transmitting May Begin",
      "body": "A new licensee may transmit as soon as the **license grant** appears in the license database of the Federal Communications Commission (FCC).",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right flow of four boxes joined by arrows. Box 1: the candidate passes the exam. Box 2: an email from the FCC carries a link to download the license grant, shown with a plain envelope icon. Box 3: the grant appears in the Universal Licensing System (ULS) database, shown with a plain database-cylinder icon. Box 4: transmitting may begin, shown with a plain antenna icon. Below Box 1, a side branch shows a certificate icon with a cross over a transmit symbol, marking that the certificate alone does not allow transmitting.",
        "imageSearchTerm": "From passing the exam to the first transmission",
        "alt": "From passing the exam to the first transmission: an email from the Federal Communications Commission (FCC), then the grant in its database, and only then transmitting.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-start-transmitting.75b8d977.webp"
      },
      "uid": "1mghob51ik592j"
    },
    {
      "id": "ht-l01-f-grace-period",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.21 Application for a modified or renewed license grant",
        "url": "https://www.ecfr.gov/current/title-47/section-97.21"
      },
      "title": "No Operating in the Grace Period",
      "body": "An expired license can still be renewed during a 2-year **grace period**. No privileges are conferred until the grant is renewed, so a licensee whose license has expired may not transmit during the grace period.",
      "uid": "1yix1rm16q47z0"
    },
    {
      "id": "ht-l01-d-csce",
      "shape": "definition",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "CSCE"
      },
      "definition": {
        "modality": "text",
        "value": "Certificate of successful completion of an examination; it shows that a candidate passed the exam",
        "short": "Certificate of exam completion"
      },
      "uid": "qje5g4zr0wdm"
    },
    {
      "id": "ht-l01-d-vanity-call-sign",
      "shape": "definition",
      "tags": [
        "call-signs",
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.19 Application for a vanity call sign",
        "url": "https://www.ecfr.gov/current/title-47/section-97.19"
      },
      "term": {
        "modality": "text",
        "value": "Vanity call sign"
      },
      "definition": {
        "modality": "text",
        "value": "A station identifier the licensee requests by listing up to 25 in order of preference; the Federal Communications Commission assigns the first assignable one, and any licensed amateur may apply",
        "short": "Identifier the licensee requests"
      },
      "uid": "16b1z737k1pzt"
    },
    {
      "id": "ht-l01-q-lost-classes",
      "shape": "mcq",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.17 Application for new license grant",
        "url": "https://www.ecfr.gov/current/title-47/section-97.17"
      },
      "prompt": {
        "modality": "text",
        "value": "Which two operator license classes can no longer be newly granted by the Federal Communications Commission (FCC)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Technician and General"
        },
        {
          "modality": "text",
          "value": "Technician and Novice"
        },
        {
          "modality": "text",
          "value": "Novice and Advanced"
        },
        {
          "modality": "text",
          "value": "General and Advanced"
        }
      ],
      "correctIndex": 2,
      "explanation": "No new grants are issued for Novice or Advanced Class. Technician, General and Amateur Extra are still issued, so each wrong pair includes a class that is still available.",
      "uid": "kp2n3wl4k4pk"
    },
    {
      "id": "ht-l01-q-license-length",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.25 License term",
        "url": "https://www.ecfr.gov/current/title-47/section-97.25"
      },
      "prompt": {
        "modality": "text",
        "value": "Under normal terms, how long does a newly granted amateur service license last?"
      },
      "options": [
        {
          "modality": "text",
          "value": "5 years"
        },
        {
          "modality": "text",
          "value": "10 years"
        },
        {
          "modality": "text",
          "value": "8 years"
        },
        {
          "modality": "text",
          "value": "15 years"
        }
      ],
      "correctIndex": 1,
      "explanation": "An amateur service license is normally granted for a 10-year term. Shorter or longer terms are not the normal term.",
      "uid": "1s4e76l102a5l5"
    },
    {
      "id": "ht-l01-q-first-transmission",
      "shape": "mcq",
      "tags": [
        "licensing",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.5 Station license required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.5"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee holds a certificate of successful completion of an examination (CSCE). Which event first allows transmitting on amateur bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The grant appearing in the database",
          "short": "Grant appears in the database"
        },
        {
          "modality": "text",
          "value": "Holding the printed certificate"
        },
        {
          "modality": "text",
          "value": "A paper license arriving by mail"
        },
        {
          "modality": "text",
          "value": "The grant posted on a club website",
          "short": "Grant posted on a club website"
        }
      ],
      "correctIndex": 0,
      "explanation": "Transmitting is allowed once the license grant appears in the license database. Holding the CSCE does not permit transmitting, and a mailed license or website posting is not the trigger.",
      "uid": "u32l7dsxvnnd"
    },
    {
      "id": "ht-l01-tf-grace-renewal",
      "shape": "trueFalse",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.21 Application for a modified or renewed license grant",
        "url": "https://www.ecfr.gov/current/title-47/section-97.21"
      },
      "statement": "An expired license may be renewed during a 2-year grace period, but operating privileges return only once it is renewed.",
      "isTrue": true,
      "why": "Renewal is possible during the 2-year grace period, but no privileges are conferred until the license grant is renewed. Applying alone does not restore them.",
      "uid": "10a66a417h4h1w"
    },
    {
      "id": "ht-l01-c-renewal-window",
      "shape": "cloze",
      "tags": [
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 1.949 Application for renewal of authorization",
        "url": "https://www.ecfr.gov/current/title-47/section-1.949"
      },
      "template": "A renewal application may be filed no sooner than ___ days before the license expires.",
      "answer": "90",
      "distractors": [
        "30",
        "60",
        "180"
      ],
      "explanation": "Renewal may be requested up to 90 days before expiration, and no later than the expiration date.",
      "uid": "dbaphvuj7c6f"
    },
    {
      "id": "ht-l01-p-group-d-format",
      "shape": "pair",
      "tags": [
        "call-signs"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Valid Group D format"
      },
      "sideB": {
        "modality": "text",
        "value": "KF1XXX"
      },
      "uid": "17fvqk81ge62fg"
    },
    {
      "id": "ht-l01-f-fcc-role",
      "shape": "fact",
      "tags": [
        "rules",
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.1 Basis and purpose",
        "url": "https://www.ecfr.gov/current/title-47/section-97.1"
      },
      "title": "The FCC Regulates Amateur Radio",
      "body": "The Amateur Radio Service in the United States is regulated and enforced by the **Federal Communications Commission (FCC)**.",
      "uid": "kln6nkx6npm2"
    },
    {
      "id": "ht-l01-tf-fcc-regulates",
      "shape": "trueFalse",
      "tags": [
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.1 Basis and purpose",
        "url": "https://www.ecfr.gov/current/title-47/section-97.1"
      },
      "statement": "Homeland Security regulates and enforces the rules of the Amateur Radio Service in the United States.",
      "isTrue": false,
      "why": "The Federal Communications Commission (FCC) regulates and enforces the amateur rules. Homeland Security does not.",
      "uid": "1qvocap1xec3gh"
    },
    {
      "id": "ht-l01-f-races-operator",
      "shape": "fact",
      "tags": [
        "emergency",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.407 Radio amateur civil emergency service",
        "url": "https://www.ecfr.gov/current/title-47/section-97.407"
      },
      "title": "Who Controls a RACES Station",
      "body": "A control operator in the **radio amateur civil emergency service (RACES)** needs a Federal Communications Commission (FCC) amateur operator license. The person also needs certification by a civil defense organization of current enrollment in that organization.",
      "uid": "r7as44h5h8dy"
    },
    {
      "id": "ht-l01-c-races-enrollment",
      "shape": "cloze",
      "tags": [
        "emergency",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.407 Radio amateur civil emergency service",
        "url": "https://www.ecfr.gov/current/title-47/section-97.407"
      },
      "template": "A radio amateur civil emergency service (RACES) control operator needs certification of current enrollment by a ___ organization.",
      "answer": "civil defense",
      "distractors": [
        "civil service",
        "volunteer examiner",
        "frequency coordination"
      ],
      "explanation": "A RACES control operator needs an amateur operator license plus certification of current enrollment by a civil defense organization.",
      "uid": "1kqa13wqj16ow"
    },
    {
      "id": "ht-l01-f-secondary",
      "shape": "fact",
      "tags": [
        "interference",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.303 Frequency sharing requirements",
        "url": "https://www.ecfr.gov/current/title-47/section-97.303"
      },
      "title": "Secondary Segments",
      "body": "In each band segment, the Amateur Radio Service is designated a **secondary service** or a primary service. A station in a secondary service must not cause harmful interference to stations in a primary service, and it must accept interference from them.",
      "uid": "1ekchn1l5ku3x"
    },
    {
      "id": "ht-l01-q-secondary-segment",
      "shape": "mcq",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.303 Frequency sharing requirements",
        "url": "https://www.ecfr.gov/current/title-47/section-97.303"
      },
      "prompt": {
        "modality": "text",
        "value": "A Technician finds non-amateur stations in a segment where the amateur service is secondary. What must the Technician do?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Avoid interfering with those stations",
          "short": "Avoid interfering with them"
        },
        {
          "modality": "text",
          "value": "Give foreign amateur stations priority",
          "short": "Give foreign stations priority"
        },
        {
          "modality": "text",
          "value": "Stop all digital transmissions there",
          "short": "Stop all digital transmissions"
        },
        {
          "modality": "text",
          "value": "Make no international contacts there",
          "short": "Make no international contacts"
        }
      ],
      "correctIndex": 0,
      "explanation": "Where the amateur service is secondary, amateurs may find non-amateur stations and must avoid interfering with them. Foreign priority and bans on digital or international contacts do not apply.",
      "uid": "bw0byz1d0ta0t"
    },
    {
      "id": "ht-l01-f-vessel",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.11 Stations aboard ships or aircraft",
        "url": "https://www.ecfr.gov/current/title-47/section-97.11"
      },
      "title": "Operating Aboard a Vessel",
      "body": "A licensee may operate from a **US-documented vessel** with the master's permission. Operation of an amateur station on a ship or aircraft must be approved by the ship's master or the aircraft's pilot in command.",
      "uid": "1vo7iv9iq4paz"
    },
    {
      "id": "ht-l01-tf-vessel-master",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.11 Stations aboard ships or aircraft",
        "url": "https://www.ecfr.gov/current/title-47/section-97.11"
      },
      "statement": "A licensee may operate from a US-documented vessel with the master's permission.",
      "isTrue": true,
      "why": "Operation on a ship must be approved by the master, and a licensee may operate from a US-documented vessel with that permission.",
      "uid": "1376sjqqq55s6"
    },
    {
      "id": "ht-l01-f-email-address",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.23 Mailing and email addresses",
        "url": "https://www.ecfr.gov/current/title-47/section-97.23"
      },
      "title": "Keep a Valid Email Address",
      "body": "Each license grant must show the grantee's correct name, mailing address and email address. If correspondence from the Federal Communications Commission (FCC) is returned undeliverable because of an incorrect email address, **revocation** of the station license or suspension of the operator license may result.",
      "uid": "lsvbv6ig5m7g"
    },
    {
      "id": "ht-l01-q-email-undeliverable",
      "shape": "mcq",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.23 Mailing and email addresses",
        "url": "https://www.ecfr.gov/current/title-47/section-97.23"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee never updated an email address, and Federal Communications Commission (FCC) mail comes back undeliverable. What may result?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only a fine for the licensee"
        },
        {
          "modality": "text",
          "value": "Revocation or suspension of license",
          "short": "Revocation or suspension"
        },
        {
          "modality": "text",
          "value": "Loss of access to the license record",
          "short": "Loss of record access"
        },
        {
          "modality": "text",
          "value": "Nothing, since email is optional"
        }
      ],
      "correctIndex": 1,
      "explanation": "If FCC mail is returned undeliverable because of a wrong email address, the station license may be revoked or the operator license suspended. A fine alone is not the stated result.",
      "uid": "1x5vvf7329cj"
    },
    {
      "id": "ht-l01-f-purpose",
      "shape": "fact",
      "tags": [
        "rules",
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.1 Basis and purpose",
        "url": "https://www.ecfr.gov/current/title-47/section-97.1"
      },
      "title": "Purpose of the Service",
      "body": "Advancing skills in the technical and communication phases of the radio art is part of the **basis and purpose** of the Amateur Radio Service. Other principles include recognizing the service's value to the public as a voluntary noncommercial communication service, particularly for emergency communications.",
      "uid": "1lucg1zkplalj"
    },
    {
      "id": "ht-l01-f-space-station",
      "shape": "fact",
      "tags": [
        "satellites",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "What Is a Space Station",
      "body": "A **space station** is an amateur station located more than 50 kilometers (km) above the Earth's surface. Height decides it.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view of a gently curved Earth surface along the bottom. A dashed horizontal line runs above it, with a vertical dimension arrow from the surface up to the line. One plain box-shaped amateur station with a small antenna floats above the dashed line and is marked as a space station. A second identical station sits below the line and is marked as not a space station. Height is the only thing that differs between the two.",
        "imageSearchTerm": "Height makes a space station",
        "alt": "Height makes a space station. An amateur station counts as a space station only when it is more than 50 km above the Earth's surface.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-space-station.1606e4fa.webp"
      },
      "uid": "ow9cj1uwu2p"
    },
    {
      "id": "ht-l01-f-prohibited-interference",
      "shape": "fact",
      "tags": [
        "interference",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.101 General standards",
        "url": "https://www.ecfr.gov/current/title-47/section-97.101"
      },
      "title": "Interference Is Prohibited",
      "body": "Willful or malicious **interference** with any radio communication or signal is prohibited. No amateur operator shall willfully or maliciously interfere with or cause interference to any radio communication or signal.",
      "uid": "8xf9mt1bovxf3"
    },
    {
      "id": "ht-l01-f-digital-bands",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.305 Authorized emission types",
        "url": "https://www.ecfr.gov/current/title-47/section-97.305"
      },
      "title": "Digital Modes for Technicians",
      "body": "Technicians may use **digital modes** such as FT8 on frequencies in the 10-meter band. They may also use them on the 6-meter band and the 2-meter band. All three bands include such frequencies.",
      "uid": "n2vola118ahta"
    },
    {
      "id": "ht-l01-f-cw-only",
      "shape": "fact",
      "tags": [
        "emissions",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.305 Authorized emission types",
        "url": "https://www.ecfr.gov/current/title-47/section-97.305"
      },
      "title": "CW-Only Segments",
      "body": "Two segments in the very high frequency (VHF) and ultra high frequency (UHF) ranges are limited to **CW** (International Morse code telegraphy emissions) only: 50.0 megahertz (MHz) to 50.1 MHz and 144.0 MHz to 144.1 MHz. Other emissions begin above those points.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two short zoomed-in frequency strips side by side. The left strip starts at 50.0 MHz. The right strip starts at 144.0 MHz. On each strip, the first 0.1 MHz, from 50.0 to 50.1 MHz and from 144.0 to 144.1 MHz, is a shaded block marked CW only. Above 50.1 MHz and above 144.1 MHz the strip continues unshaded, with an arrow noting that other emissions begin there. A small dot-dash motif inside each shaded block suggests Morse code.",
        "imageSearchTerm": "The two CW-only segments",
        "alt": "The two segments limited to Morse code telegraphy (CW): 50.0 to 50.1 megahertz (MHz) on 6 meters and 144.0 to 144.1 MHz on 2 meters.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-cw-only.6ce5660c.webp"
      },
      "uid": "updy30d4m6eo"
    },
    {
      "id": "ht-l01-f-band-edge",
      "shape": "fact",
      "tags": [
        "operating",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.101 General standards",
        "url": "https://www.ecfr.gov/current/title-47/section-97.101"
      },
      "title": "Stay Off the Band Edge",
      "body": "A station should not transmit exactly at a band or sub-band edge. The transmitter's frequency display may have **calibration error**, modulation sidebands could extend beyond the edge, and the transmitter frequency may drift.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal frequency axis with a bold vertical line marking the band edge. The area beyond the edge is lightly hatched as outside the band. A signal is drawn as a central carrier spike with a hump of modulation sidebands on either side. It sits a little inside the band, so its outer sideband stops short of the edge. Three callouts: (1) a small digital display reading next to the carrier, with a short double-headed arrow showing that the true frequency can differ from the reading; (2) a bracket across the sideband hump showing its width; (3) a sideways arrow showing the signal can drift toward the edge. A faint ghost copy placed right on the edge shows its sideband spilling past the line.",
        "imageSearchTerm": "Why to stay off the band edge",
        "alt": "Why to stay off the band edge: the three reasons not to transmit exactly at a band edge: display calibration error, sidebands spreading past the edge, and drift.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-band-edge.e2331c6f.webp"
      },
      "uid": "akdm5u45jdjk"
    },
    {
      "id": "ht-l01-f-ssb-above-50",
      "shape": "fact",
      "tags": [
        "emissions",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.305 Authorized emission types",
        "url": "https://www.ecfr.gov/current/title-47/section-97.305"
      },
      "title": "SSB Above 50 MHz",
      "body": "**Single sideband (SSB)** phone may be used in at least some segment of every amateur band above 50 megahertz (MHz).",
      "uid": "176bgiwtuheko"
    },
    {
      "id": "ht-l01-f-power-above-30",
      "shape": "fact",
      "tags": [
        "power",
        "privileges"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.313 Transmitter power standards",
        "url": "https://www.ecfr.gov/current/title-47/section-97.313"
      },
      "title": "1500 Watts Above 30 MHz",
      "body": "Above 30 megahertz (MHz), Technicians may use up to **1500 watts** of peak envelope power (PEP), except for some specific restrictions. This limit covers ultra high frequency (UHF) as well as very high frequency (VHF).",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A vertical bar chart with two bars on a watts axis from 0 to 1500, with bar heights to scale. The left bar is Technician HF segments, reaching 200 watts. The right bar is above 30 MHz, reaching 1500 watts. Under the right bar, a bracket notes that this range covers both VHF and UHF. A footnote under the chart states that some specific restrictions apply above 30 MHz. The axis is labeled as peak envelope power.",
        "imageSearchTerm": "Technician power limits: HF segments and above 30 MHz",
        "alt": "Technician power limits: 200 watts peak envelope power in the high frequency (HF) segments, and 1500 watts above 30 megahertz (MHz).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-power-above-30.a6b395f1.webp"
      },
      "uid": "126ksczfs8rt"
    },
    {
      "id": "ht-l01-f-international",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.117 International communications",
        "url": "https://www.ecfr.gov/current/title-47/section-97.117"
      },
      "title": "International Communications",
      "body": "Transmissions to a different country, where permitted, are limited to communications incidental to the purposes of the amateur service and to **remarks of a personal character**.",
      "uid": "15gek3812jjjec"
    },
    {
      "id": "ht-l01-f-group-d",
      "shape": "fact",
      "tags": [
        "call-signs"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Valid Group D Format",
      "body": "A valid **Group D** call sign format for a Technician class is KF1XXX: two letters, a digit and three letters.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The call sign KF1XXX in large, evenly spaced block characters across the center. Three brackets sit beneath it: one under 'KF' marked two letters, one under '1' marked one digit, and one under 'XXX' marked three letters. A heading above names the format as Group D for the Technician class.",
        "imageSearchTerm": "Reading a Group D call sign",
        "alt": "Reading a Group D call sign: the Technician Group D format KF1XXX broken into its parts: two letters, a digit and three letters.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l01-f-group-d.01b156e8.webp"
      },
      "uid": "i3j5ai1xusyge"
    },
    {
      "id": "ot-ht-l01-t1a01",
      "shape": "mcq",
      "tags": [
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is part of the Basis and Purpose of the Amateur Radio Service?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Providing personal radio communications for as many citizens as possible"
        },
        {
          "modality": "text",
          "value": "Providing communications for international contesting"
        },
        {
          "modality": "text",
          "value": "Advancing skills in the technical and communication phases of the radio art"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Advancing skills in the technical and communication phases of the radio art is one of the service's stated principles. The other options are not among them.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "olz3dbg1u94d"
    },
    {
      "id": "ot-ht-l01-t1a02",
      "shape": "mcq",
      "tags": [
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which agency regulates and enforces the rules for the Amateur Radio Service in the United States?"
      },
      "options": [
        {
          "modality": "text",
          "value": "ARRL"
        },
        {
          "modality": "text",
          "value": "Homeland Security"
        },
        {
          "modality": "text",
          "value": "The FCC"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "The Federal Communications Commission (FCC) regulates and enforces the amateur rules. Homeland Security does not. ARRL stands for American Radio Relay League.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "11cceln4ducwx"
    },
    {
      "id": "ot-ht-l01-t1a11",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is prohibited?"
      },
      "options": [
        {
          "modality": "text",
          "value": "International communications on VHF bands and higher frequencies"
        },
        {
          "modality": "text",
          "value": "Willful or malicious interference"
        },
        {
          "modality": "text",
          "value": "Third-party traffic using digital modes"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "Willful or malicious interference with any radio communication or signal is prohibited. VHF stands for very high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1l1vt7tosx5h7"
    },
    {
      "id": "ot-ht-l01-t1a03",
      "shape": "mcq",
      "tags": [
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "What do the FCC rules state regarding the use of a phonetic alphabet for station identification in the Amateur Radio Service?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It is required when transmitting emergency messages"
        },
        {
          "modality": "text",
          "value": "It is encouraged when using phone emissions"
        },
        {
          "modality": "text",
          "value": "It is required when in contact with foreign stations"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "A phonetic alphabet is encouraged on phone to aid correct identification. It is not required for emergency messages or foreign contacts. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "svog4v15tk3ol"
    },
    {
      "id": "ot-ht-l01-t1a07",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the FCC Part 97 definition of a space station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Any satellite orbiting Earth"
        },
        {
          "modality": "text",
          "value": "A manned satellite orbiting Earth"
        },
        {
          "modality": "text",
          "value": "An amateur station located more than 50 km above Earth's surface"
        },
        {
          "modality": "text",
          "value": "An amateur station using amateur radio satellites for relay of signals"
        }
      ],
      "correctIndex": 2,
      "explanation": "Height decides it: a space station is an amateur station more than 50 km above Earth's surface. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "84m9jb11ps0ob"
    },
    {
      "id": "ot-ht-l01-t1a04",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "How do you receive official notification of your new license and call sign after passing the exam?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Email from the FCC with a link to download the license grant"
        },
        {
          "modality": "text",
          "value": "USPS First-Class Mail from the FCC"
        },
        {
          "modality": "text",
          "value": "Email from the lead volunteer examiner"
        },
        {
          "modality": "text",
          "value": "USPS First-Class Mail from the lead volunteer examiner"
        }
      ],
      "correctIndex": 0,
      "explanation": "The official notice is a Federal Communications Commission (FCC) email with a link to download the license grant. USPS stands for United States Postal Service.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bditomyqoabo"
    },
    {
      "id": "ot-ht-l01-t1a05",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "What proves that the FCC has issued an operator/primary license grant?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A printed copy of the certificate of successful completion of examination"
        },
        {
          "modality": "text",
          "value": "An email notification from the NCVEC granting the license"
        },
        {
          "modality": "text",
          "value": "The license appears in the FCC ULS database"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "The license appearing in the Universal Licensing System (ULS) database proves the grant. A printed examination certificate does not. FCC stands for Federal Communications Commission and NCVEC stands for National Conference of Volunteer Examiner Coordinators.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "roxpydlhx84r"
    },
    {
      "id": "ot-ht-l01-t1a06",
      "shape": "mcq",
      "tags": [
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "On which of the following HF frequencies can automatically controlled amateur propagation beacons be found?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Anywhere in the Technician portion of 10 meters"
        },
        {
          "modality": "text",
          "value": "Anywhere, if they are registered with the FCC"
        },
        {
          "modality": "text",
          "value": "In a specific portion of each of the HF Technician bands"
        },
        {
          "modality": "text",
          "value": "On ten meters, between 28.200 MHz and 28.300 MHz"
        }
      ],
      "correctIndex": 3,
      "explanation": "Automatically controlled propagation beacons are on ten meters, 28.200 to 28.300 MHz. HF stands for high frequency and FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "t7xz3lcvbhtp"
    },
    {
      "id": "ot-ht-l01-t1a08",
      "shape": "mcq",
      "tags": [
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who recommends transmit/receive channels for repeater and auxiliary stations?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A Frequency Spectrum Manager appointed by the FCC"
        },
        {
          "modality": "text",
          "value": "A Volunteer Frequency Coordinator recognized by local amateurs"
        },
        {
          "modality": "text",
          "value": "An FCC Regional Field Office"
        },
        {
          "modality": "text",
          "value": "The International Telecommunication Union"
        }
      ],
      "correctIndex": 1,
      "explanation": "A Volunteer Frequency Coordinator recognized by local amateurs recommends repeater and auxiliary channels, not the Federal Communications Commission (FCC).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1h9lltimg7yjm"
    },
    {
      "id": "ot-ht-l01-t1a09",
      "shape": "mcq",
      "tags": [
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who selects a Frequency Coordinator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The FCC Office of Spectrum Management and Coordination Policy"
        },
        {
          "modality": "text",
          "value": "The local chapter of the Office of National Council of Independent Frequency Coordinators"
        },
        {
          "modality": "text",
          "value": "Local or regional amateurs whose stations are eligible as repeater or auxiliary stations"
        },
        {
          "modality": "text",
          "value": "The FCC Regional Field Office"
        }
      ],
      "correctIndex": 2,
      "explanation": "Amateur operators in the local or regional area whose stations are eligible to be repeater or auxiliary stations select the coordinator. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "xb542zh2d9gr"
    },
    {
      "id": "ot-ht-l01-t1a10",
      "shape": "mcq",
      "tags": [
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "Besides an FCC-issued amateur operator license, what is required to be the control operator of a Radio Amateur Civil Emergency Service (RACES) Station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A written recommendation by the local ARRL Emergency Coordinator"
        },
        {
          "modality": "text",
          "value": "Membership in the Amateur Radio Emergency Service (ARES)"
        },
        {
          "modality": "text",
          "value": "Certification of current enrollment by a civil defense organization"
        },
        {
          "modality": "text",
          "value": "Nothing"
        }
      ],
      "correctIndex": 2,
      "explanation": "A RACES control operator needs a Federal Communications Commission (FCC) amateur license plus civil defense certification of current enrollment. ARRL stands for American Radio Relay League.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19aptyrd6srl3"
    },
    {
      "id": "ot-ht-l01-t1b03",
      "shape": "mcq",
      "tags": [
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which frequency is in the 6-meter amateur band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "49.00 MHz"
        },
        {
          "modality": "text",
          "value": "52.525 MHz"
        },
        {
          "modality": "text",
          "value": "28.50 MHz"
        },
        {
          "modality": "text",
          "value": "222.15 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "The 6-meter band spans 50-54 MHz, so 52.525 MHz is in it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1l6cheq1qdjwuu"
    },
    {
      "id": "ot-ht-l01-t1b04",
      "shape": "mcq",
      "tags": [
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which amateur band includes 146.52 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "6 meters"
        },
        {
          "modality": "text",
          "value": "20 meters"
        },
        {
          "modality": "text",
          "value": "70 centimeters"
        },
        {
          "modality": "text",
          "value": "2 meters"
        }
      ],
      "correctIndex": 3,
      "explanation": "The 2-meter band spans 144-148 MHz and includes 146.52 MHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9a462bnbqcwl"
    },
    {
      "id": "ot-ht-l01-t1b01",
      "shape": "mcq",
      "tags": [
        "privileges"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following frequency ranges are available for phone operation by Technician licensees?"
      },
      "options": [
        {
          "modality": "text",
          "value": "28.050 MHz to 28.150 MHz"
        },
        {
          "modality": "text",
          "value": "28.100 MHz to 28.300 MHz"
        },
        {
          "modality": "text",
          "value": "28.300 MHz to 28.500 MHz"
        },
        {
          "modality": "text",
          "value": "28.500 MHz to 28.600 MHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "The Technician phone range on 10 meters is 28.300 to 28.500 MHz. Ranges starting lower or ending higher are not it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ftpq105cpwvy"
    },
    {
      "id": "ot-ht-l01-t1b06",
      "shape": "mcq",
      "tags": [
        "privileges"
      ],
      "prompt": {
        "modality": "text",
        "value": "On which HF bands does a Technician class operator have phone privileges?"
      },
      "options": [
        {
          "modality": "text",
          "value": "None"
        },
        {
          "modality": "text",
          "value": "10-meter band only"
        },
        {
          "modality": "text",
          "value": "80-meter, 40-meter, 15-meter, and 10-meter bands"
        },
        {
          "modality": "text",
          "value": "30-meter band only"
        }
      ],
      "correctIndex": 1,
      "explanation": "Technician high frequency (HF) phone privileges are on the 10-meter band only, not on 80, 40 or 15 meters.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1e1qxao1uvml4"
    },
    {
      "id": "ot-ht-l01-t1b05",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following bands include frequencies where Technicians are authorized to use digital modes such as FT8?"
      },
      "options": [
        {
          "modality": "text",
          "value": "10 meters"
        },
        {
          "modality": "text",
          "value": "6 meters"
        },
        {
          "modality": "text",
          "value": "2 meters"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Technicians may use digital modes such as FT8 on 10 meters, 6 meters and 2 meters, so all three are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "r8i2xj1jduc7n"
    },
    {
      "id": "ot-ht-l01-t1b02",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following U.S. amateur radio operators are allowed to contact the International Space Station (ISS) on VHF bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only amateurs with a General class or higher license"
        },
        {
          "modality": "text",
          "value": "Any amateur with a Technician class or higher license"
        },
        {
          "modality": "text",
          "value": "Only amateurs with a General class or higher license, and NASA approval"
        },
        {
          "modality": "text",
          "value": "Any amateurs with a Technician class or higher license, and NASA approval"
        }
      ],
      "correctIndex": 1,
      "explanation": "Any Technician or higher licensee may contact the ISS on very high frequency (VHF) bands. No General license or NASA approval is needed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1trcb85ijywfd"
    },
    {
      "id": "ot-ht-l01-t1b07",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following VHF/UHF band segments are limited to CW only?"
      },
      "options": [
        {
          "modality": "text",
          "value": "50.0 MHz to 50.1 MHz and 144.0 MHz to 144.1 MHz"
        },
        {
          "modality": "text",
          "value": "219 MHz to 220 MHz and 420.0 MHz to 420.1 MHz"
        },
        {
          "modality": "text",
          "value": "902.0 MHz to 902.1 MHz"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "50.0 to 50.1 MHz and 144.0 to 144.1 MHz are the segments for continuous wave (CW) only. The other ranges listed are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1fan1o21edb9k2"
    },
    {
      "id": "ot-ht-l01-t1b10",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "Where may SSB phone be used in amateur bands above 50 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only in sub-bands allocated to General class or higher licensees"
        },
        {
          "modality": "text",
          "value": "Only on repeaters"
        },
        {
          "modality": "text",
          "value": "In at least some segment of all these bands"
        },
        {
          "modality": "text",
          "value": "On any band if the power is limited to 25 watts"
        }
      ],
      "correctIndex": 2,
      "explanation": "Single sideband (SSB) phone may be used in at least some segment of every amateur band above 50 MHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "142cjq4fqn16c"
    },
    {
      "id": "ot-ht-l01-t1b08",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "How are US amateurs restricted in segments of bands where the Amateur Radio Service is secondary?"
      },
      "options": [
        {
          "modality": "text",
          "value": "U.S. amateurs may find non-amateur stations there and must avoid interfering with them"
        },
        {
          "modality": "text",
          "value": "U.S. amateurs must give foreign amateur stations priority in those segments"
        },
        {
          "modality": "text",
          "value": "International communications are not permitted in those segments"
        },
        {
          "modality": "text",
          "value": "Digital transmissions are not permitted in those segments"
        }
      ],
      "correctIndex": 0,
      "explanation": "Where amateur service is secondary, amateurs may find non-amateur stations and must avoid interfering with them.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "fd4rtjlcx2nn"
    },
    {
      "id": "ot-ht-l01-t1b09",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why should you not set your transmit frequency to be exactly at the edge of an amateur band or sub-band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To allow for calibration error in the transmitter frequency display"
        },
        {
          "modality": "text",
          "value": "So that modulation sidebands do not extend beyond the band edge"
        },
        {
          "modality": "text",
          "value": "To allow for transmitter frequency drift"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Display calibration error, sidebands past the edge and frequency drift are all reasons to stay off the band edge.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1tuh829f8diw5"
    },
    {
      "id": "ot-ht-l01-t1b11",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the maximum peak envelope power output for Technician class operators in their HF band segments?"
      },
      "options": [
        {
          "modality": "text",
          "value": "200 watts"
        },
        {
          "modality": "text",
          "value": "100 watts"
        },
        {
          "modality": "text",
          "value": "50 watts"
        },
        {
          "modality": "text",
          "value": "10 watts"
        }
      ],
      "correctIndex": 0,
      "explanation": "In their high frequency (HF) segments, Technician operators may not exceed 200 watts peak envelope power (PEP).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "jf82qogtuhke"
    },
    {
      "id": "ot-ht-l01-t1b12",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Except for some specific restrictions, what is the maximum peak envelope power output for Technician class operators using frequencies above 30 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "50 watts"
        },
        {
          "modality": "text",
          "value": "100 watts"
        },
        {
          "modality": "text",
          "value": "500 watts"
        },
        {
          "modality": "text",
          "value": "1500 watts"
        }
      ],
      "correctIndex": 3,
      "explanation": "Above 30 MHz, Technicians may use up to 1500 watts peak envelope power (PEP), except for specific restrictions.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1si9z4d1r4ijff"
    },
    {
      "id": "ot-ht-l01-t1c01",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "For which classes of amateur radio licenses does the FCC currently issue new licenses?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Novice, Technician, General, Amateur Extra"
        },
        {
          "modality": "text",
          "value": "Technician, Technician Plus, General, Amateur Extra"
        },
        {
          "modality": "text",
          "value": "Novice, Technician Plus, General, Advanced"
        },
        {
          "modality": "text",
          "value": "Technician, General, Amateur Extra"
        }
      ],
      "correctIndex": 3,
      "explanation": "As of 2026, the Federal Communications Commission (FCC) issues new licenses only for Technician, General and Amateur Extra; no new Novice or Advanced grants are issued.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "don0ov2qs4jr"
    },
    {
      "id": "ot-ht-l01-t1c02",
      "shape": "mcq",
      "tags": [
        "call-signs"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who may select a desired call sign under the vanity call sign rules?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only a licensed amateur with a General or Amateur Extra Class license"
        },
        {
          "modality": "text",
          "value": "Only a licensed amateur with an Amateur Extra Class license"
        },
        {
          "modality": "text",
          "value": "Only a licensed amateur who has been licensed continuously for more than 10 years"
        },
        {
          "modality": "text",
          "value": "Any licensed amateur"
        }
      ],
      "correctIndex": 3,
      "explanation": "Any licensed amateur may select a call sign under the vanity rules, whatever the class.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "16bie521vqhnv6"
    },
    {
      "id": "ot-ht-l01-t1c05",
      "shape": "mcq",
      "tags": [
        "call-signs"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a valid Group D call sign format for Technician class?"
      },
      "options": [
        {
          "modality": "text",
          "value": "KF1XXX"
        },
        {
          "modality": "text",
          "value": "KA1X"
        },
        {
          "modality": "text",
          "value": "W1XX"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "KF1XXX, two letters, a digit and three letters, is a valid Group D format for a Technician. KA1X and W1XX are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qaqsrpuzf0st"
    },
    {
      "id": "ot-ht-l01-t1c03",
      "shape": "mcq",
      "tags": [
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "What types of international communications are FCC-licensed amateur radio stations permitted to make?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Communications incidental to amateur radio purposes and remarks of a personal character"
        },
        {
          "modality": "text",
          "value": "Communications incidental to conducting business or remarks of a personal nature"
        },
        {
          "modality": "text",
          "value": "Only communications incidental to contest exchanges; all others are prohibited"
        },
        {
          "modality": "text",
          "value": "Any communications that would be permitted by an international broadcast station"
        }
      ],
      "correctIndex": 0,
      "explanation": "International transmissions are limited to communications incidental to the purposes of the service and personal remarks. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1av84f8prnxg6"
    },
    {
      "id": "ot-ht-l01-t1c06",
      "shape": "mcq",
      "tags": [
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following statements is true about using your amateur radio license when operating aboard a vessel or craft in international waters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Amateur operation is prohibited in international waters"
        },
        {
          "modality": "text",
          "value": "You may only operate during maritime emergencies"
        },
        {
          "modality": "text",
          "value": "You need special FCC authorization for maritime mobile operation"
        },
        {
          "modality": "text",
          "value": "You may operate from a US-documented vessel with the master's permission"
        }
      ],
      "correctIndex": 3,
      "explanation": "A licensee may operate from a US-documented vessel with the master's permission. No special Federal Communications Commission (FCC) authorization is needed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "c2tnhk1nwye1y"
    },
    {
      "id": "ot-ht-l01-t1c10",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "How soon after passing the examination for your first amateur radio license may you transmit on the amateur radio bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Immediately on receiving your Certificate of Successful Completion of Examination (CSCE)"
        },
        {
          "modality": "text",
          "value": "As soon as your operator/station license grant appears on the ARRL website"
        },
        {
          "modality": "text",
          "value": "As soon as your operator/station license grant appears in the FCC’s license database"
        },
        {
          "modality": "text",
          "value": "As soon as you receive your license in the mail from the FCC"
        }
      ],
      "correctIndex": 2,
      "explanation": "A new licensee may transmit once the grant appears in the license database of the Federal Communications Commission (FCC), not on holding a CSCE or receiving mail. ARRL stands for American Radio Relay League.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "sp2as6vrhk6c"
    },
    {
      "id": "ot-ht-l01-t1c08",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the normal term for an FCC-issued amateur radio license?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Five years"
        },
        {
          "modality": "text",
          "value": "Eight years"
        },
        {
          "modality": "text",
          "value": "Ten years"
        },
        {
          "modality": "text",
          "value": "Life"
        }
      ],
      "correctIndex": 2,
      "explanation": "An amateur license is normally granted for a 10-year term. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "15uyyq814pza2e"
    },
    {
      "id": "ot-ht-l01-t1c07",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "How long before the expiration date may an amateur radio license renewal be requested?"
      },
      "options": [
        {
          "modality": "text",
          "value": "30 days"
        },
        {
          "modality": "text",
          "value": "90 days"
        },
        {
          "modality": "text",
          "value": "6 months"
        },
        {
          "modality": "text",
          "value": "1 year"
        }
      ],
      "correctIndex": 1,
      "explanation": "Renewal may be requested no sooner than 90 days before the expiration date.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "yhhic21uh43r0"
    },
    {
      "id": "ot-ht-l01-t1c09",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the grace period for renewal if an amateur license expires?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Two years"
        },
        {
          "modality": "text",
          "value": "Three years"
        },
        {
          "modality": "text",
          "value": "Five years"
        },
        {
          "modality": "text",
          "value": "Ten years"
        }
      ],
      "correctIndex": 0,
      "explanation": "An expired license can be renewed during a 2-year grace period, provided the application is received before it ends.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1a8mfmd10w1ez"
    },
    {
      "id": "ot-ht-l01-t1c11",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "If your license has expired and is still within the allowable grace period, may you continue to transmit on the amateur radio bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Yes, for up to two years"
        },
        {
          "modality": "text",
          "value": "Yes, as soon as you apply for renewal"
        },
        {
          "modality": "text",
          "value": "Yes, for up to one year"
        },
        {
          "modality": "text",
          "value": "No, you must wait until the license has been renewed"
        }
      ],
      "correctIndex": 3,
      "explanation": "No privileges are conferred until the license is renewed, so transmitting is not allowed during the grace period.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19g7pum1scr3kc"
    },
    {
      "id": "ot-ht-l01-t1c04",
      "shape": "mcq",
      "tags": [
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "What may happen if the FCC is unable to reach you by email?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Fine and suspension of operator license"
        },
        {
          "modality": "text",
          "value": "Revocation of the station license or suspension of the operator license"
        },
        {
          "modality": "text",
          "value": "Revocation of access to the license record in the FCC system"
        },
        {
          "modality": "text",
          "value": "Nothing; there is no such requirement"
        }
      ],
      "correctIndex": 1,
      "explanation": "If Federal Communications Commission (FCC) mail is returned undeliverable because of a wrong email address, the station license may be revoked or the operator license suspended.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1axhs9nahmeol"
    },
    {
      "id": "ht-l02-f-countries-itu",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.111 Authorized transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.111"
      },
      "title": "Countries That Object to Contact",
      "body": "Stations licensed by the Federal Communications Commission (FCC) may not exchange communications with any country whose administration has notified the **International Telecommunication Union (ITU)** that it objects to such communications.",
      "uid": "10qx9nreufub9"
    },
    {
      "id": "ht-l02-f-one-way-broadcast",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113(b) Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "Broadcasting Is the Banned One-Way Use",
      "body": "An amateur station may not send one-way communications except where the rules provide. Allowed one-way uses include brief adjustment transmissions, Morse code practice, **telecommand** and telemetry. Broadcasting stays prohibited even though these other one-way uses are allowed.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. The left panel is headed as allowed one-way uses and holds three small arrow sketches. First, a station with an arrow going out to a distant device, for telecommand. Second, a distant measuring instrument with an arrow coming back to a station, for telemetry. Third, a station sending dots and dashes, for Morse code practice. The right panel is headed as prohibited. It shows a station with arrows fanning out to a crowd of generic receivers standing for the general public, with a clear prohibition mark over it.",
        "imageSearchTerm": "Allowed one-way uses and the banned one",
        "alt": "Allowed one-way uses and the banned one: telecommand, telemetry and Morse code practice marked allowed, and broadcasting to the general public marked prohibited.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-one-way-broadcast.e4f543ab.webp"
      },
      "uid": "gyjii11uy9ll3"
    },
    {
      "id": "ht-l02-f-coded-messages",
      "shape": "fact",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.211 Space telecommand station (see also §§ 97.113 Prohibited transmissions and 97.215 Telecommand of model craft)",
        "url": "https://www.ecfr.gov/current/title-47/section-97.211"
      },
      "title": "Coded Messages and Their Exception",
      "body": "An amateur station may not send messages encoded to obscure their meaning. The exception covers control commands to space stations or model craft. A telecommand station may send special **codes** meant to obscure its commands to a station in space. Signals controlling a model craft are not considered codes or ciphers.",
      "uid": "1hueen76kciq5"
    },
    {
      "id": "ht-l02-f-music-phone",
      "shape": "fact",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "Music on a Phone Emission",
      "body": "A phone emission may not carry music, except as the rules provide. The exception is music incidental to an authorized retransmission of manned spacecraft communications. These retransmissions need prior approval from the National Aeronautics and Space Administration (NASA). They may happen only occasionally, never on a regular basis.",
      "uid": "17dhk3p1dbrjn5"
    },
    {
      "id": "ht-l02-f-selling-equipment",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "Selling Equipment on the Air",
      "body": "An amateur may use the station to tell others that apparatus normally used in an amateur station is for **sale or trade**. This is allowed only when it is not done on a regular basis.",
      "uid": "1lby1r318qxc75"
    },
    {
      "id": "ht-l02-f-indecent-language",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "Indecent Language Is Banned",
      "body": "**Obscene or indecent** words or language are prohibited, with no exception. The rule is a flat ban on any such language.",
      "uid": "1i09tcwtrakz4"
    },
    {
      "id": "ht-l02-f-auxiliary-station",
      "shape": "fact",
      "tags": [
        "rules",
        "repeaters"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.201 Auxiliary station",
        "url": "https://www.ecfr.gov/current/title-47/section-97.201"
      },
      "title": "An Example of an Auxiliary Station",
      "body": "An **auxiliary station** transmits point-to-point within a system of cooperating amateur stations. One example is a station sending one-way transmissions between a remote repeater receiver and the main repeater transmitter.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two separate sites, drawn left and right with open ground between them. On the left is a small mast with a simple box labeled as the remote repeater receiver. On the right is a second mast with a box labeled as the main repeater transmitter. A single straight arrow runs from left to right between the two sites and points only one way, toward the main transmitter. This arrow is the auxiliary station's link. Draw no return arrow. A light dashed outline encloses both sites to mark them as one system of cooperating amateur stations.",
        "imageSearchTerm": "An auxiliary station linking a repeater",
        "alt": "An auxiliary station linking a repeater: where an auxiliary station sits in a repeater system: a one-way, point-to-point link from a remote repeater receiver to the main repeater transmitter.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-auxiliary-station.519fb723.webp"
      },
      "uid": "1i2fm5v1hcce0h"
    },
    {
      "id": "ht-l02-f-pay-teaching",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "When a Control Operator Gets Paid",
      "body": "A control operator generally may not accept pay for operating. One exception is a teaching position. **Compensation** is allowed when the teacher uses the station as part of classroom instruction at an educational institution.",
      "uid": "1bsxj981v7ooim"
    },
    {
      "id": "ht-l02-f-news-gathering",
      "shape": "fact",
      "tags": [
        "rules",
        "emergency"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113(b) Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "title": "News Gathering and Its One Exception",
      "body": "Amateur stations may not do program production or **news gathering** for broadcasting. The one exception is communications directly related to the immediate safety of human life or the protection of property. This applies only where no other means of communication is reasonably available before or at the time of the event.",
      "uid": "euus2wiz1dec"
    },
    {
      "id": "ht-l02-f-broadcasting-defined",
      "shape": "fact",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "What Broadcasting Means",
      "body": "In the Amateur Radio Service, **broadcasting** means transmissions intended for reception by the general public, either direct or relayed. An amateur station may not engage in any form of it.",
      "uid": "1g62c8fmilxvb"
    },
    {
      "id": "ht-l02-f-no-id-model-craft",
      "shape": "fact",
      "tags": [
        "rules",
        "identification"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.215 Telecommand of model craft",
        "url": "https://www.ecfr.gov/current/title-47/section-97.215"
      },
      "title": "Transmitting Without Identifying",
      "body": "Identification is not required for transmissions directed only to a **model craft**. A label with the station call sign and the licensee's name and address must be affixed to the transmitter. The transmitter power must not exceed 1 watt (W).",
      "uid": "1tm7jz21pv7ia0"
    },
    {
      "id": "ht-l02-f-id-tests",
      "shape": "fact",
      "tags": [
        "rules",
        "identification"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "title": "Identifying During On-Air Tests",
      "body": "**Test transmissions** on the air must identify the transmitting station.",
      "uid": "c3ztqxcg8jg5"
    },
    {
      "id": "ht-l02-d-telecommand",
      "shape": "definition",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Telecommand"
      },
      "definition": {
        "modality": "text",
        "value": "A one-way transmission to initiate, modify, or terminate functions of a device at a distance",
        "short": "One-way signal for a distant device"
      },
      "uid": "15oujgkosfl3e"
    },
    {
      "id": "ht-l02-d-telemetry",
      "shape": "definition",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Telemetry"
      },
      "definition": {
        "modality": "text",
        "value": "A one-way transmission of measurements at a distance from the measuring instrument",
        "short": "One-way remote measurement signal"
      },
      "uid": "y58ms81gl34z2"
    },
    {
      "id": "ht-l02-q-sale-announcement",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants to announce on the air that a radio is for sale. When is that allowed?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only when the seller earns no profit at all",
          "short": "Only if no profit is made"
        },
        {
          "modality": "text",
          "value": "Never, on any amateur frequency or mode",
          "short": "Never on amateur frequencies"
        },
        {
          "modality": "text",
          "value": "Only when it is not done on a regular basis",
          "short": "Only when not done regularly"
        },
        {
          "modality": "text",
          "value": "Only when the radio is a relative's property",
          "short": "Only a relative's radio"
        }
      ],
      "correctIndex": 2,
      "explanation": "Sale or trade notices are allowed when not made on a regular basis. Profit and ownership do not decide it, and the rule is not a flat ban.",
      "uid": "1armwhv1ioe1bl"
    },
    {
      "id": "ht-l02-q-allowed-one-way",
      "shape": "mcq",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.111 Authorized transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.111"
      },
      "prompt": {
        "modality": "text",
        "value": "Which one-way transmission is allowed for an amateur station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Telemetry of measurements at a distance",
          "short": "Telemetry of measurements"
        },
        {
          "modality": "text",
          "value": "Broadcasting to the general public",
          "short": "Broadcasting to the public"
        },
        {
          "modality": "text",
          "value": "A regular news program for a station",
          "short": "Regular news program"
        },
        {
          "modality": "text",
          "value": "Music programs for general listeners",
          "short": "Music for listeners"
        }
      ],
      "correctIndex": 0,
      "explanation": "Telemetry is a listed one-way use. Broadcasting, news programs and music for the public are all prohibited.",
      "uid": "1qq2m91ggwj1v"
    },
    {
      "id": "ht-l02-q-objection-body",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.111 Authorized transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.111"
      },
      "prompt": {
        "modality": "text",
        "value": "A country wants stations licensed by the Federal Communications Commission (FCC) barred from contacting it. Which body must receive its notice of objection?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The American Radio Relay League"
        },
        {
          "modality": "text",
          "value": "The International Amateur Radio Union",
          "short": "Intl. Amateur Radio Union"
        },
        {
          "modality": "text",
          "value": "The Federal Communications Commission",
          "short": "Federal Communications Comm."
        },
        {
          "modality": "text",
          "value": "The International Telecommunication Union",
          "short": "Intl. Telecommunication Union"
        }
      ],
      "correctIndex": 3,
      "explanation": "Only an objection notified to the International Telecommunication Union creates the ban. A notice to the other organizations does not.",
      "uid": "1r7dp8gjxwwg2"
    },
    {
      "id": "ht-l02-q-news-safety",
      "shape": "mcq",
      "tags": [
        "rules",
        "emergency"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113(b) Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "prompt": {
        "modality": "text",
        "value": "At an event where no other communication is reasonably available, what may an amateur station give to broadcasters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A regular weekly program for the broadcaster",
          "short": "A weekly program"
        },
        {
          "modality": "text",
          "value": "Messages on immediate safety of life or property",
          "short": "Safety of life or property"
        },
        {
          "modality": "text",
          "value": "Recorded music to fill the broadcaster's airtime",
          "short": "Recorded music for airtime"
        },
        {
          "modality": "text",
          "value": "Coverage of any local news story of interest",
          "short": "Any local news coverage"
        }
      ],
      "correctIndex": 1,
      "explanation": "Only communications directly related to immediate safety of life or protection of property are allowed. Programs, music and general news are not.",
      "uid": "15bchhekp6wta"
    },
    {
      "id": "ht-l02-tf-music-spurious",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "statement": "A phone emission may carry music whenever the music produces no spurious emissions.",
      "isTrue": false,
      "why": "Music on phone is allowed only when incidental to an authorized retransmission of manned spacecraft communications.",
      "uid": "yreb7o1fzjtpc"
    },
    {
      "id": "ht-l02-tf-model-craft-label",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "identification"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.215 Telecommand of model craft",
        "url": "https://www.ecfr.gov/current/title-47/section-97.215"
      },
      "statement": "A station sending signals only to a model craft need not identify, if its transmitter carries a label with call sign, name and address.",
      "isTrue": true,
      "why": "Model craft control transmissions are exempt from identification when the transmitter is labeled and power does not exceed 1 watt.",
      "uid": "fo41yt1bklw8b"
    },
    {
      "id": "ht-l02-c-broadcasting",
      "shape": "cloze",
      "tags": [
        "rules",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "template": "Transmissions intended for reception by the general public are called ___.",
      "answer": "broadcasting",
      "distractors": [
        "telemetry",
        "telecommand",
        "retransmission"
      ],
      "explanation": "Broadcasting is defined by its intended audience, the general public. Telemetry and telecommand are one-way allowed uses with other purposes.",
      "uid": "3k9yu01rd4h7w"
    },
    {
      "id": "ht-l02-p-music-phone",
      "shape": "pair",
      "tags": [
        "rules",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.113 Prohibited transmissions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.113"
      },
      "sideA": {
        "modality": "text",
        "value": "Music on phone"
      },
      "sideB": {
        "modality": "text",
        "value": "Only incidental to manned spacecraft relay",
        "short": "Only incidental to spacecraft relay"
      },
      "uid": "d4z9l21k5h6ly"
    },
    {
      "id": "ht-l02-f-control-operator-required",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.7 Control operator required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.7"
      },
      "title": "A Control Operator Is Always Required",
      "body": "An amateur station may never transmit without a **control operator**. Automatic control, as with a repeater, does not remove the requirement.",
      "uid": "1lzy9omo0bx4m"
    },
    {
      "id": "ht-l02-f-satellite-operator",
      "shape": "fact",
      "tags": [
        "rules",
        "satellites"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Control Operators for Satellite Stations",
      "body": "Any amateur allowed to transmit on the satellite **uplink** frequency may be the control operator of a station communicating through an amateur satellite or space station.",
      "uid": "9a9vaq1jz8byk"
    },
    {
      "id": "ht-l02-f-who-designates",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "title": "The Licensee Designates the Operator",
      "body": "The **station licensee** must designate the station control operator. The Federal Communications Commission (FCC) presumes the licensee is also the control operator, unless documentation to the contrary is in the station records.",
      "uid": "yna00y10p3ano"
    },
    {
      "id": "ht-l02-f-privileges-class",
      "shape": "fact",
      "tags": [
        "privileges",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "title": "Privileges Follow the Control Operator",
      "body": "The control operator's **license class** determines the transmitting frequency privileges of the station.",
      "uid": "1d2kfsz10n10y9"
    },
    {
      "id": "ht-l02-f-control-point",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "The Control Point",
      "body": "A **control point** is the location at which the control operator function is performed.",
      "uid": "11d4uqyze18z0"
    },
    {
      "id": "ht-l02-f-extra-segments",
      "shape": "fact",
      "tags": [
        "privileges",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "title": "Technicians and Extra Class Segments",
      "body": "Apart from an emergency, a Technician class licensee may never be the control operator of a station in an **Amateur Extra Class** band segment. The rule holds even if an Amateur Extra Class licensee designates the Technician.",
      "uid": "1j36omaxvlumg"
    },
    {
      "id": "ht-l02-f-shared-responsibility",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "title": "Who Is Responsible for the Station",
      "body": "The licensee is responsible for the proper operation of the station. When the control operator is a different amateur, both are **equally responsible**.",
      "uid": "17lhpsz1klsixf"
    },
    {
      "id": "ht-l02-f-automatic-control",
      "shape": "fact",
      "tags": [
        "rules",
        "repeaters"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "Automatic Control and Repeaters",
      "body": "Under **automatic control**, devices and procedures control a station while it transmits. Compliance is achieved without the control operator being present at a control point. Repeater operation is the standard example.",
      "uid": "16c163ht9l8n1"
    },
    {
      "id": "ht-l02-f-any-station-remote",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.109 Station control",
        "url": "https://www.ecfr.gov/current/title-47/section-97.109"
      },
      "title": "Any Station May Be Remote",
      "body": "Any station may be remotely controlled. When a station is remotely controlled, the control operator must be at the control point.",
      "uid": "157fasqwa2g62"
    },
    {
      "id": "ht-l02-f-remote-control",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two simple station blocks, drawn side by side. Left panel: a station with no operator figure at a control point, linked to an automatic control box. Right panel: a station linked through a control link to a control point where the control operator sits. Plain line art only, with no people's faces.",
        "imageSearchTerm": "Automatic and remote control side by side",
        "alt": "Automatic and remote control side by side: the two control types differ in whether a control operator must be at a control point.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-remote-control.9cbe6887.webp"
      },
      "title": "What Counts as Remote Control",
      "body": "Under **remote control**, a control operator indirectly adjusts the station through a control link. Operating a station over the internet is an example.",
      "uid": "t0zay61vf5o08"
    },
    {
      "id": "ht-l02-f-control-operator-role",
      "shape": "fact",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "What a Control Operator Is",
      "body": "A **control operator** is the amateur designated by the licensee to be responsible for transmissions and for compliance with the Federal Communications Commission (FCC) rules.",
      "uid": "t54fih15hg6df"
    },
    {
      "id": "ht-l02-d-frequency-coordinator",
      "shape": "definition",
      "tags": [
        "rules",
        "repeaters"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Frequency coordinator"
      },
      "definition": {
        "modality": "text",
        "value": "A locally recognized entity that recommends channels and parameters for repeater and auxiliary stations to minimize interference",
        "short": "Suggests channels to cut interference"
      },
      "uid": "i0ctw3eykkv5"
    },
    {
      "id": "ht-l02-d-space-station",
      "shape": "definition",
      "tags": [
        "rules",
        "satellites"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Space station"
      },
      "definition": {
        "modality": "text",
        "value": "An amateur station located more than 50 km above the Earth's surface",
        "short": "Station over 50 km above Earth"
      },
      "uid": "1xd2m9a98ldbg"
    },
    {
      "id": "ht-l02-q-designate-friend",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "prompt": {
        "modality": "text",
        "value": "Another amateur will run a station for an evening. Who must designate that amateur as the station's control operator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The licensee who holds the station license",
          "short": "The station licensee"
        },
        {
          "modality": "text",
          "value": "The federal agency that issues licenses",
          "short": "The licensing agency"
        },
        {
          "modality": "text",
          "value": "The local or regional frequency coordinator",
          "short": "A frequency coordinator"
        },
        {
          "modality": "text",
          "value": "Any licensed operator who is present",
          "short": "Any licensed operator present"
        }
      ],
      "correctIndex": 0,
      "explanation": "The station licensee designates the control operator. Neither the Federal Communications Commission nor a frequency coordinator does, and a licensed bystander cannot.",
      "uid": "1w0fo9v19rn34b"
    },
    {
      "id": "ht-l02-q-remote-operator-location",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.109 Station control",
        "url": "https://www.ecfr.gov/current/title-47/section-97.109"
      },
      "prompt": {
        "modality": "text",
        "value": "A station is being remotely controlled. Where must its control operator be?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At the site of the transmitting antenna",
          "short": "At the antenna site"
        },
        {
          "modality": "text",
          "value": "At the control point of the station",
          "short": "At the control point"
        },
        {
          "modality": "text",
          "value": "At the licensee's mailing address",
          "short": "At the mailing address"
        },
        {
          "modality": "text",
          "value": "Anywhere at all with no control point needed",
          "short": "Anywhere at all"
        }
      ],
      "correctIndex": 1,
      "explanation": "Under remote control the operator must be at the control point. A control point is where the control function is performed, not the antenna site or a mailing address.",
      "uid": "1jgon491i5dlzv"
    },
    {
      "id": "ht-l02-q-satellite-requirement",
      "shape": "mcq",
      "tags": [
        "rules",
        "satellites"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A Technician wants to be control operator of a station using an amateur satellite. Which is required?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A higher-class operator license",
          "short": "A higher-class license"
        },
        {
          "modality": "text",
          "value": "A satellite operator certification",
          "short": "A satellite certification"
        },
        {
          "modality": "text",
          "value": "Being allowed to transmit on the uplink",
          "short": "Uplink transmit permission"
        },
        {
          "modality": "text",
          "value": "Membership in a satellite organization",
          "short": "Satellite group membership"
        }
      ],
      "correctIndex": 2,
      "explanation": "Any amateur allowed to transmit on the uplink frequency may be the control operator. No higher-class license, certification or membership is required.",
      "uid": "wx8gx8telasc"
    },
    {
      "id": "ht-l02-q-responsibility-both",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee designates a different amateur as control operator. Who is responsible for proper operation of the station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only the licensee of the station"
        },
        {
          "modality": "text",
          "value": "Only the designated control operator",
          "short": "Only the control operator"
        },
        {
          "modality": "text",
          "value": "Every licensed amateur who is present",
          "short": "All licensed amateurs present"
        },
        {
          "modality": "text",
          "value": "Both the licensee and the control operator",
          "short": "Licensee and control operator"
        }
      ],
      "correctIndex": 3,
      "explanation": "The two are equally responsible. Placing it on only one of them is wrong, and bystanders do not share it.",
      "uid": "ovk4qefv0362"
    },
    {
      "id": "ht-l02-tf-extra-designation",
      "shape": "trueFalse",
      "tags": [
        "privileges",
        "bands"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "statement": "If an Amateur Extra Class licensee designates a Technician as control operator, the Technician may operate in an Extra Class segment.",
      "isTrue": false,
      "why": "Apart from an emergency, a Technician may never be control operator in such a segment, even when an Extra Class licensee designates the Technician.",
      "uid": "n3uyq0eq7fe0"
    },
    {
      "id": "ht-l02-tf-automatic-no-presence",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "repeaters"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "statement": "Under automatic control, compliance with Federal Communications Commission (FCC) rules is achieved without the control operator at a control point.",
      "isTrue": true,
      "why": "That is what separates automatic control from remote control, where the control operator must be at the control point.",
      "uid": "13ir9da1ao18y4"
    },
    {
      "id": "ht-l02-c-privileges-source",
      "shape": "cloze",
      "tags": [
        "privileges",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.301 Authorized frequency bands",
        "url": "https://www.ecfr.gov/current/title-47/section-97.301"
      },
      "template": "A station's transmitting privileges are set by the license class of its ___.",
      "answer": "control operator",
      "distractors": [
        "frequency coordinator",
        "station trustee",
        "station licensee"
      ],
      "explanation": "The control operator's license class sets the privileges. A frequency coordinator only recommends channels, and the licensee's class counts only when the licensee is the one acting as control operator.",
      "uid": "1cc0etpe7gau9"
    },
    {
      "id": "ht-l02-p-control-point",
      "shape": "pair",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "sideA": {
        "modality": "text",
        "value": "Control point"
      },
      "sideB": {
        "modality": "text",
        "value": "Where the control operator function is done",
        "short": "Where the control operator acts"
      },
      "uid": "1if0xm61m3e506"
    },
    {
      "id": "ht-l02-f-inspection",
      "shape": "fact",
      "tags": [
        "rules",
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "title": "Inspection on Request",
      "body": "The station licensee must make the station and the station records available for **inspection** upon request by a Federal Communications Commission (FCC) representative. That means at any time.",
      "uid": "1ia1hn81ys8tcs"
    },
    {
      "id": "ht-l02-f-identify-10-minutes",
      "shape": "fact",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A horizontal timeline of one communication, from its start to its end. Tick marks at 10-minute intervals. Markers at each interval and at the end show where the assigned call sign is due. A small tag above the timeline names a tactical call, with the same markers below it.",
        "imageSearchTerm": "When a station must give its call sign",
        "alt": "When a station must give its call sign: identification follows the whole communication, with the assigned call sign due at least every 10 minutes during it and at its end, a tactical call included.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-identify-10-minutes.25489311.webp"
      },
      "title": "Identify at Least Every 10 Minutes",
      "body": "A station must give its assigned **call sign** at the end of each communication and at least every 10 minutes during it. A tactical call such as \"Race Headquarters\" does not change this, because the tactical call is not sufficient alone.",
      "uid": "w6oo9h1pj7hkz"
    },
    {
      "id": "ht-l02-f-id-language",
      "shape": "fact",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "title": "English for Phone Identification",
      "body": "A phone identification must be in the **English language**. The rules encourage a phonetic alphabet as an aid to correct identification.",
      "uid": "113g1xj1guqbs3"
    },
    {
      "id": "ht-l02-f-id-method",
      "shape": "fact",
      "tags": [
        "identification",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "title": "How a Phone Station Identifies",
      "body": "A station transmitting phone signals may send its call sign using a **CW** or phone emission. CW means international Morse code telegraphy emissions.",
      "uid": "1a6jb6q1l010ls"
    },
    {
      "id": "ht-l02-f-indicators",
      "shape": "fact",
      "tags": [
        "identification",
        "call-signs"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "title": "Acceptable Phone Indicators",
      "body": "An indicator must be separated from the call sign by the **slant mark** (/) or by a suitable word that denotes it. On a phone transmission, \"KL7CC stroke W3\", \"KL7CC slant W3\" and \"KL7CC slash W3\" are all acceptable.",
      "uid": "1vdl2gf2tfw4t"
    },
    {
      "id": "ht-l02-f-third-party-foreign",
      "shape": "fact",
      "tags": [
        "third-party",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.115 Third party communications",
        "url": "https://www.ecfr.gov/current/title-47/section-97.115"
      },
      "title": "Unlicensed Speakers and Foreign Stations",
      "body": "An unlicensed person may speak to a foreign amateur station through a station whose control operator is licensed by the Federal Communications Commission (FCC). The foreign station must be in a country with which the United States has a **third-party agreement**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right path. On the far left is a simple generic figure for the unlicensed person, with a speech bubble. Next to it is a United States amateur station with its control operator, licensed by the Federal Communications Commission (FCC). A radio-wave arrow crosses a stylised border or ocean gap to a foreign amateur station on the right. That foreign station sits inside a shaded box marked as a country with a third-party agreement with the United States. Under the whole path, a caption states that the message goes from one control operator to another on behalf of another person.",
        "imageSearchTerm": "A third-party message to a foreign station",
        "alt": "A third-party message to a foreign station: how an unlicensed person's message passes through a licensed control operator to a foreign station, and the condition on the foreign country.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-third-party-foreign.17926118.webp"
      },
      "uid": "sxxe351o3s8h7"
    },
    {
      "id": "ht-l02-f-third-party-defined",
      "shape": "fact",
      "tags": [
        "third-party",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "What Third-Party Communications Are",
      "body": "**Third-party communications** are messages from one control operator to another station's control operator on behalf of another person.",
      "uid": "8436m61rbsguk"
    },
    {
      "id": "ht-l02-f-repeater-defined",
      "shape": "fact",
      "tags": [
        "repeaters",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "title": "Repeaters Retransmit on Another Channel",
      "body": "A **repeater** simultaneously retransmits the transmission of another amateur station on a different channel or channels. That is what sets it apart from stations with other jobs.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Three elements in a row. On the left is a small amateur station with an antenna. In the center is a repeater on a mast. On the right are two or three receiving stations. An arrow in one tone runs from the left station into the repeater and is marked as the input channel. An arrow in a second tone runs out of the repeater toward the receiving stations and is marked as a different output channel. A small note on the repeater says the two happen simultaneously.",
        "imageSearchTerm": "A repeater retransmits on a different channel",
        "alt": "A repeater retransmits on a different channel: the one feature that defines a repeater: it takes in another station's transmission and sends it out again at the same moment on a different channel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l02-f-repeater-defined.7f7db302.webp"
      },
      "uid": "dles3xaxuwf1"
    },
    {
      "id": "ht-l02-f-repeater-accountability",
      "shape": "fact",
      "tags": [
        "repeaters",
        "control-operator"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Who Answers for Repeater Violations",
      "body": "If a repeater inadvertently retransmits communications that violate the rules, the control operator of the **originating station** is accountable.",
      "uid": "1c1ab8fi0a541"
    },
    {
      "id": "ht-l02-f-club-license",
      "shape": "fact",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.5 Station license required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.5"
      },
      "title": "Requirements for a Club License",
      "body": "A **club station** license grant may be held only by the license trustee. The club must be composed of at least four persons.",
      "uid": "1jdwdp11g21ho1"
    },
    {
      "id": "ht-l02-d-beacon",
      "shape": "definition",
      "tags": [
        "rules",
        "propagation"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Beacon"
      },
      "definition": {
        "modality": "text",
        "value": "An amateur station transmitting to observe propagation and reception, or for related experimental activities",
        "short": "Station observing propagation"
      },
      "uid": "fot7p7113yio3"
    },
    {
      "id": "ht-l02-d-indicator",
      "shape": "definition",
      "tags": [
        "identification",
        "call-signs"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Indicator"
      },
      "definition": {
        "modality": "text",
        "value": "Words, letters or numerals appended to and separated from the call sign during identification",
        "short": "Extra text added to a call sign"
      },
      "uid": "1ctnt6014gf3a8"
    },
    {
      "id": "ht-l02-q-inspection-timing",
      "shape": "mcq",
      "tags": [
        "rules",
        "licensing"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.103 Station licensee responsibilities",
        "url": "https://www.ecfr.gov/current/title-47/section-97.103"
      },
      "prompt": {
        "modality": "text",
        "value": "A Federal Communications Commission (FCC) representative asks to see the station and its records. When must the licensee comply?"
      },
      "options": [
        {
          "modality": "text",
          "value": "After ten days' notice has passed",
          "short": "After ten days' notice"
        },
        {
          "modality": "text",
          "value": "After written notice is given",
          "short": "After written notice"
        },
        {
          "modality": "text",
          "value": "Whenever the representative asks",
          "short": "Any time, on request"
        },
        {
          "modality": "text",
          "value": "Only when a warrant is presented",
          "short": "Only with a warrant"
        }
      ],
      "correctIndex": 2,
      "explanation": "The station and records must be available at any time upon request. Notice periods and warrants are not required.",
      "uid": "wou9qc144kd9a"
    },
    {
      "id": "ht-l02-q-tactical-call",
      "shape": "mcq",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "prompt": {
        "modality": "text",
        "value": "A station uses the tactical call \"Race Headquarters\" during a long contact. Which identification is also required?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Nothing more as the tactical call is enough",
          "short": "Nothing; tactical call suffices"
        },
        {
          "modality": "text",
          "value": "Its call sign every 15 minutes and at the end",
          "short": "Every 15 minutes and the end"
        },
        {
          "modality": "text",
          "value": "Its call sign at the end of every transmission",
          "short": "End of every transmission"
        },
        {
          "modality": "text",
          "value": "Its call sign every 10 minutes and at the end",
          "short": "Every 10 minutes and the end"
        }
      ],
      "correctIndex": 3,
      "explanation": "The assigned call sign is still due at least every 10 minutes and at the end of the communication. A tactical call alone is not sufficient.",
      "uid": "u2wtkz1ctyk5n"
    },
    {
      "id": "ht-l02-q-club-requirement",
      "shape": "mcq",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.5 Station license required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.5"
      },
      "prompt": {
        "modality": "text",
        "value": "A club wants a club station license grant. Which requirement applies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A trustee holding an Amateur Extra Class license",
          "short": "Extra Class trustee"
        },
        {
          "modality": "text",
          "value": "A club composed of at least four persons",
          "short": "At least four persons"
        },
        {
          "modality": "text",
          "value": "Registration with the American Radio Relay League",
          "short": "Registration with the League"
        },
        {
          "modality": "text",
          "value": "Approval from a frequency coordinator",
          "short": "Frequency coordinator approval"
        }
      ],
      "correctIndex": 1,
      "explanation": "The club must have at least four persons. The trustee does not need an Extra Class license, and league registration is not required.",
      "uid": "1bfxqva15o87zy"
    },
    {
      "id": "ht-l02-q-repeater-violation",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.205 Repeater station",
        "url": "https://www.ecfr.gov/current/title-47/section-97.205"
      },
      "prompt": {
        "modality": "text",
        "value": "A repeater inadvertently retransmits a message that violates the rules. Who is accountable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The control operator of the originating station",
          "short": "Originating station's operator"
        },
        {
          "modality": "text",
          "value": "The control operator of the repeater",
          "short": "The repeater's control operator"
        },
        {
          "modality": "text",
          "value": "The person who owns the repeater"
        },
        {
          "modality": "text",
          "value": "Both the repeater owner and its control operator",
          "short": "Repeater owner and operator"
        }
      ],
      "correctIndex": 0,
      "explanation": "The originating station's control operator is accountable. Neither the repeater's control operator nor its owner is accountable for an inadvertent retransmission.",
      "uid": "7746awhpk8ne"
    },
    {
      "id": "ht-l02-tf-third-party-defn",
      "shape": "trueFalse",
      "tags": [
        "third-party",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "statement": "A message from one control operator to another station's control operator on behalf of another person is third-party communication.",
      "isTrue": true,
      "why": "The three parties are the sending control operator, the receiving control operator and the person on whose behalf the message is sent.",
      "uid": "1figlz61bcmtoc"
    },
    {
      "id": "ht-l02-tf-phone-language",
      "shape": "trueFalse",
      "tags": [
        "identification",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.119 Station identification",
        "url": "https://www.ecfr.gov/current/title-47/section-97.119"
      },
      "statement": "A phone identification may be given in English, French or Spanish at the operator's choice.",
      "isTrue": false,
      "why": "A phone identification must be in the English language. Other languages are not permitted for it.",
      "uid": "17lxaky24a99q"
    },
    {
      "id": "ht-l02-c-club-members",
      "shape": "cloze",
      "tags": [
        "licensing",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.5 Station license required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.5"
      },
      "template": "A club station license grant requires a club of at least ___ persons.",
      "answer": "four",
      "distractors": [
        "two",
        "three",
        "six"
      ],
      "explanation": "The club must be composed of at least four persons. A smaller group does not qualify.",
      "uid": "yv8ugh1wzqbln"
    },
    {
      "id": "ht-l02-p-repeater-violation",
      "shape": "pair",
      "tags": [
        "repeaters",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.205 Repeater station",
        "url": "https://www.ecfr.gov/current/title-47/section-97.205"
      },
      "sideA": {
        "modality": "text",
        "value": "Repeater violation"
      },
      "sideB": {
        "modality": "text",
        "value": "Originating station's control operator",
        "short": "Originating station's operator"
      },
      "uid": "nszxmrhnosyn"
    },
    {
      "id": "ht-l02-tf-repeater-no-operator",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "control-operator"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.7 Control operator required",
        "url": "https://www.ecfr.gov/current/title-47/section-97.7"
      },
      "statement": "A repeater under automatic control may transmit without a control operator.",
      "isTrue": false,
      "why": "A station may never transmit without a control operator. Automatic control does not remove that requirement.",
      "uid": "11248pf60cqbj"
    },
    {
      "id": "ot-ht-l02-t1d01",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "With which countries are FCC-licensed amateur radio stations prohibited from exchanging communications?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Any country that has notified the ITU that it objects to such communications"
        },
        {
          "modality": "text",
          "value": "Any country that has notified the ARRL that it objects to such communications"
        },
        {
          "modality": "text",
          "value": "Any country banned from such communications by the IARU"
        },
        {
          "modality": "text",
          "value": "Any country banned from such communications by the ARRL"
        }
      ],
      "correctIndex": 0,
      "explanation": "Only an objection notified to the International Telecommunication Union (ITU) bans contact with a country. A notice to the American Radio Relay League (ARRL), or a ban by the ARRL or International Amateur Radio Union (IARU), does not. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "j0t4b91sh2sdb"
    },
    {
      "id": "ot-ht-l02-t1d02",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Under which of the following circumstances are one-way transmissions by an amateur station prohibited?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Announcements of upcoming ham radio operating events"
        },
        {
          "modality": "text",
          "value": "Broadcasting"
        },
        {
          "modality": "text",
          "value": "International Morse Code Practice"
        },
        {
          "modality": "text",
          "value": "Telecommand or transmissions of telemetry"
        }
      ],
      "correctIndex": 1,
      "explanation": "Broadcasting stays prohibited even though other one-way uses, like telecommand and telemetry, are allowed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "3vkqhi1wb0l4o"
    },
    {
      "id": "ot-ht-l02-t1d10",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "How does the FCC define broadcasting for the Amateur Radio Service?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Two-way transmissions by amateur stations"
        },
        {
          "modality": "text",
          "value": "Any transmission made by the licensed station"
        },
        {
          "modality": "text",
          "value": "Transmission of messages directed only to amateur operators"
        },
        {
          "modality": "text",
          "value": "Transmissions intended for reception by the general public"
        }
      ],
      "correctIndex": 3,
      "explanation": "Broadcasting is defined by its audience: transmissions intended for reception by the general public. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bvrzyyur3ccs"
    },
    {
      "id": "ot-ht-l02-t1d03",
      "shape": "mcq",
      "tags": [
        "rules",
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "When is it permissible to transmit messages encoded to obscure their meaning?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only when using a remote station during a contest"
        },
        {
          "modality": "text",
          "value": "Only when transmitting certain approved digital codes"
        },
        {
          "modality": "text",
          "value": "Only when transmitting control commands to space stations or model craft"
        },
        {
          "modality": "text",
          "value": "Never"
        }
      ],
      "correctIndex": 2,
      "explanation": "Coded messages are barred except control commands to space stations or model craft.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1979l4057iesm"
    },
    {
      "id": "ot-ht-l02-t1d04",
      "shape": "mcq",
      "tags": [
        "rules",
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "Under what conditions is an amateur station authorized to transmit music using a phone emission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When incidental to an authorized retransmission of manned spacecraft communications"
        },
        {
          "modality": "text",
          "value": "When the music produces no spurious emissions"
        },
        {
          "modality": "text",
          "value": "When transmissions are limited to less than three minutes per hour"
        },
        {
          "modality": "text",
          "value": "When the music is transmitted above 1280 MHz"
        }
      ],
      "correctIndex": 0,
      "explanation": "Music on phone is allowed only when incidental to an authorized retransmission of manned spacecraft communications.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9orwf41rurj32"
    },
    {
      "id": "ot-ht-l02-t1d06",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What, if any, are the restrictions concerning transmission of language that may be considered indecent or obscene?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The FCC maintains a list of words that are not permitted to be used on amateur frequencies"
        },
        {
          "modality": "text",
          "value": "Any such language is prohibited"
        },
        {
          "modality": "text",
          "value": "The International Telecommunications Union lists words not allowed on amateur frequencies"
        },
        {
          "modality": "text",
          "value": "There is no such prohibition"
        }
      ],
      "correctIndex": 1,
      "explanation": "Any obscene or indecent language is prohibited. No word list is involved. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bpsx521bvlap4"
    },
    {
      "id": "ot-ht-l02-t1d05",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "When may amateur radio operators use their stations to notify other amateurs of the availability of equipment for sale or trade?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Never"
        },
        {
          "modality": "text",
          "value": "When not the personal property of the licensee, control operator, or close relatives"
        },
        {
          "modality": "text",
          "value": "When no profit is made on the sale"
        },
        {
          "modality": "text",
          "value": "When selling amateur radio equipment and not on a regular basis"
        }
      ],
      "correctIndex": 3,
      "explanation": "Sale or trade notices are allowed when not done on a regular basis. It is not a flat ban, and profit does not decide it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jb72lcqutm7y"
    },
    {
      "id": "ot-ht-l02-t1d08",
      "shape": "mcq",
      "tags": [
        "rules",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "In which of the following circumstances may the control operator of an amateur station receive compensation for operating that station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When related to the sale of amateur equipment by the control operator's employer"
        },
        {
          "modality": "text",
          "value": "When the communication is a part of classroom instruction at an educational institution"
        },
        {
          "modality": "text",
          "value": "When made to obtain emergency information for a local broadcast station"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "Pay is allowed as an incident of teaching with the station in classroom instruction. Employer sales and broadcaster news gathering are not exceptions.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1sie7ab1yj21ol"
    },
    {
      "id": "ot-ht-l02-t1d09",
      "shape": "mcq",
      "tags": [
        "rules",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "When may amateur stations transmit information in support of broadcasting, program production, or news gathering, assuming no other means is available?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When directly related to the immediate safety of human life or protection of property"
        },
        {
          "modality": "text",
          "value": "When broadcasting communications to or from the space shuttle"
        },
        {
          "modality": "text",
          "value": "Where non-commercial programming is supplied only to the National Public Radio network"
        },
        {
          "modality": "text",
          "value": "Never"
        }
      ],
      "correctIndex": 0,
      "explanation": "The only news-support exception is communications directly related to immediate safety of life or protection of property.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1utucqhfzuf7v"
    },
    {
      "id": "ot-ht-l02-t1d07",
      "shape": "mcq",
      "tags": [
        "rules",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an example of an auxiliary station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A station sending one-way signals between remote repeater receiver and main transmitter"
        },
        {
          "modality": "text",
          "value": "A backup radio for emergency use in case the main station radio fails"
        },
        {
          "modality": "text",
          "value": "A Military Auxiliary Radio System station linking government and amateur stations"
        },
        {
          "modality": "text",
          "value": "A second station utilized in multi-operator contest stations"
        }
      ],
      "correctIndex": 0,
      "explanation": "An auxiliary station sends point-to-point one-way links within a system, such as between a remote repeater receiver and the main transmitter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1hojuw19oz6nr"
    },
    {
      "id": "ot-ht-l02-t1d11",
      "shape": "mcq",
      "tags": [
        "rules",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "When may an amateur station transmit without identifying on the air?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When the transmissions are of a brief nature to make station adjustments"
        },
        {
          "modality": "text",
          "value": "When the transmissions are unmodulated"
        },
        {
          "modality": "text",
          "value": "When the transmitted power level is below 0.1 watt"
        },
        {
          "modality": "text",
          "value": "When transmitting signals to control model craft"
        }
      ],
      "correctIndex": 3,
      "explanation": "Transmissions directed only to a model craft need no identification, if the transmitter is labeled and power is within 1 watt.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "u39v2s145frtm"
    },
    {
      "id": "ot-ht-l02-t1d12",
      "shape": "mcq",
      "tags": [
        "rules",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is required when making on-the-air test transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Identify the transmitting station"
        },
        {
          "modality": "text",
          "value": "Conduct tests only between 10 p.m. and 6 a.m. local time"
        },
        {
          "modality": "text",
          "value": "Notify the FCC of the transmissions"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "On-air tests must identify the transmitting station. No Federal Communications Commission (FCC) notice or set hours are required.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1o439j6qu4qjg"
    },
    {
      "id": "ot-ht-l02-t1e01",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "When may an amateur station transmit without a control operator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When using automatic control, such as in the case of a repeater"
        },
        {
          "modality": "text",
          "value": "When the station licensee is away and another licensed amateur is using the station"
        },
        {
          "modality": "text",
          "value": "When the transmitting station is an auxiliary station"
        },
        {
          "modality": "text",
          "value": "Never"
        }
      ],
      "correctIndex": 3,
      "explanation": "A control operator is always required. Automatic control, an absent licensee or auxiliary status does not remove that.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1twirui1ierps"
    },
    {
      "id": "ot-ht-l02-t1e11",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a control operator as defined in Part 97?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The person speaking or otherwise communicating messages over an amateur station"
        },
        {
          "modality": "text",
          "value": "The person who is the licensee of an amateur station"
        },
        {
          "modality": "text",
          "value": "Amateur in FCC database responsible for transmissions and FCC rules at license location"
        },
        {
          "modality": "text",
          "value": "Amateur designated by licensee responsible for transmissions and FCC rules at station"
        }
      ],
      "correctIndex": 3,
      "explanation": "A control operator is designated by the licensee and is responsible for transmissions and rules compliance. It is not simply the speaker or licensee. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ce6pzn1yheaxp"
    },
    {
      "id": "ot-ht-l02-t1e03",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who must designate the station control operator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The station licensee"
        },
        {
          "modality": "text",
          "value": "The FCC"
        },
        {
          "modality": "text",
          "value": "The frequency coordinator"
        },
        {
          "modality": "text",
          "value": "Any licensed operator"
        }
      ],
      "correctIndex": 0,
      "explanation": "The station licensee designates the control operator. The Federal Communications Commission (FCC), a frequency coordinator or any licensed operator does not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1p0aozg5e2irw"
    },
    {
      "id": "ot-ht-l02-t1e07",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "When the control operator is not the station licensee, who is responsible for the proper operation of the station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "All licensed amateurs who are present at the operation"
        },
        {
          "modality": "text",
          "value": "Only the station licensee"
        },
        {
          "modality": "text",
          "value": "Only the control operator"
        },
        {
          "modality": "text",
          "value": "The control operator and the station licensee"
        }
      ],
      "correctIndex": 3,
      "explanation": "When the control operator differs from the licensee, both are equally responsible. Bystanders are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nt32u446kbwk"
    },
    {
      "id": "ot-ht-l02-t1e02",
      "shape": "mcq",
      "tags": [
        "rules",
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who may be the control operator of a station communicating through an amateur satellite or space station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only an Amateur Extra Class operator"
        },
        {
          "modality": "text",
          "value": "A General class or higher licensee with a satellite operator certification"
        },
        {
          "modality": "text",
          "value": "Only an Amateur Extra Class operator who is also an AMSAT member"
        },
        {
          "modality": "text",
          "value": "Any amateur allowed to transmit on the satellite uplink frequency"
        }
      ],
      "correctIndex": 3,
      "explanation": "Any amateur allowed to transmit on the uplink frequency may be control operator. No Extra Class license, certification or membership is needed. AMSAT stands for Radio Amateur Satellite Corporation.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1mvryougmq6gw"
    },
    {
      "id": "ot-ht-l02-t1e04",
      "shape": "mcq",
      "tags": [
        "privileges",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "What determines the transmitting frequency privileges of an amateur station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The frequency authorized by the frequency coordinator"
        },
        {
          "modality": "text",
          "value": "The frequencies printed on the license grant"
        },
        {
          "modality": "text",
          "value": "The highest class of operator license held by anyone on the premises"
        },
        {
          "modality": "text",
          "value": "The class of operator license held by the control operator"
        }
      ],
      "correctIndex": 3,
      "explanation": "The control operator's license class sets the station's privileges, not the license grant, a coordinator or others present.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "kv6j921qoxg7u"
    },
    {
      "id": "ot-ht-l02-t1e06",
      "shape": "mcq",
      "tags": [
        "privileges",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "When, other than during an emergency, may a Technician class licensee be the control operator of a station operating in an Amateur Extra Class band segment?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At no time"
        },
        {
          "modality": "text",
          "value": "When designated as the control operator by an Amateur Extra Class licensee"
        },
        {
          "modality": "text",
          "value": "As part of a multi-operator contest team"
        },
        {
          "modality": "text",
          "value": "When using a club station whose trustee holds an Amateur Extra Class license"
        }
      ],
      "correctIndex": 0,
      "explanation": "Apart from an emergency, a Technician may never be control operator in an Extra Class segment, even if designated by an Extra Class licensee.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jkcqau1qhom0g"
    },
    {
      "id": "ot-ht-l02-t1e05",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an amateur station’s control point?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The location of the station’s transmitting antenna"
        },
        {
          "modality": "text",
          "value": "The location of the station’s transmitting apparatus"
        },
        {
          "modality": "text",
          "value": "The location at which the control operator function is performed"
        },
        {
          "modality": "text",
          "value": "The mailing address of the station licensee"
        }
      ],
      "correctIndex": 2,
      "explanation": "The control point is where the control operator function is performed, not the antenna, apparatus or mailing address.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "y0i4qutc2a28"
    },
    {
      "id": "ot-ht-l02-t1e08",
      "shape": "mcq",
      "tags": [
        "rules",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an example of automatic control?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Repeater operation"
        },
        {
          "modality": "text",
          "value": "Controlling a station over the internet"
        },
        {
          "modality": "text",
          "value": "Using a computer or other device to send CW automatically"
        },
        {
          "modality": "text",
          "value": "Using a computer or other device to identify automatically"
        }
      ],
      "correctIndex": 0,
      "explanation": "Repeater operation is the standard example of automatic control. Internet control is remote control. CW stands for continuous wave.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nqc8q4m83h2q"
    },
    {
      "id": "ot-ht-l02-t1e09",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which amateur stations may be remotely controlled?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Only repeater stations"
        },
        {
          "modality": "text",
          "value": "Only automatically controlled stations"
        },
        {
          "modality": "text",
          "value": "Only digital stations"
        },
        {
          "modality": "text",
          "value": "Any station"
        }
      ],
      "correctIndex": 3,
      "explanation": "Any station may be remotely controlled, not only repeaters, automatic or digital stations.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "mztwnun6nax0"
    },
    {
      "id": "ot-ht-l02-t1e10",
      "shape": "mcq",
      "tags": [
        "rules",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an example of remote control as defined in Part 97?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A software defined radio (SDR)"
        },
        {
          "modality": "text",
          "value": "Operating the station over the internet"
        },
        {
          "modality": "text",
          "value": "Controlling a model aircraft, boat, or car by amateur radio"
        },
        {
          "modality": "text",
          "value": "Earth-Moon-Earth (EME) communication"
        }
      ],
      "correctIndex": 1,
      "explanation": "Operating a station over the internet is remote control. Model craft control, an SDR and EME are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "a8glzu1sbvjui"
    },
    {
      "id": "ot-ht-l02-t1f01",
      "shape": "mcq",
      "tags": [
        "rules",
        "licensing"
      ],
      "prompt": {
        "modality": "text",
        "value": "When must the station licensee make the station and the station records available for inspection?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At any time ten days after notification by the FCC of such an inspection"
        },
        {
          "modality": "text",
          "value": "At any time upon request by an FCC representative"
        },
        {
          "modality": "text",
          "value": "At any time after a written notification by the FCC of such inspection"
        },
        {
          "modality": "text",
          "value": "Only when presented with a valid warrant by an FCC official or government agent"
        }
      ],
      "correctIndex": 1,
      "explanation": "The station and records must be available at any time on a Federal Communications Commission (FCC) representative's request. No notice period or warrant applies.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "2zmdvc11xytkk"
    },
    {
      "id": "ot-ht-l02-t1f02",
      "shape": "mcq",
      "tags": [
        "identification",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "How often must you identify with your FCC-assigned call sign when using tactical call signs such as “Race Headquarters”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Never, the tactical call is sufficient"
        },
        {
          "modality": "text",
          "value": "Once every hour"
        },
        {
          "modality": "text",
          "value": "At least every 10 minutes during and at the end of a communication"
        },
        {
          "modality": "text",
          "value": "At the end of every transmission"
        }
      ],
      "correctIndex": 2,
      "explanation": "A tactical call does not replace the call sign assigned by the Federal Communications Commission (FCC). That call sign is due at least every 10 minutes and at the end.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1feksx212avmue"
    },
    {
      "id": "ot-ht-l02-t1f03",
      "shape": "mcq",
      "tags": [
        "identification",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "When are you required to transmit your assigned call sign?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At the beginning of each contact, and every 10 minutes thereafter"
        },
        {
          "modality": "text",
          "value": "At least once during each transmission"
        },
        {
          "modality": "text",
          "value": "At least every 15 minutes during and at the end of a communication"
        },
        {
          "modality": "text",
          "value": "At least every 10 minutes during and at the end of a communication"
        }
      ],
      "correctIndex": 3,
      "explanation": "The call sign is due at the end of each communication and at least every 10 minutes during it, not every 15 minutes or each transmission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jebcs23xdz8a"
    },
    {
      "id": "ot-ht-l02-t1f04",
      "shape": "mcq",
      "tags": [
        "identification",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What language must you use for identification when using a phone emission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Any language recognized by the United Nations"
        },
        {
          "modality": "text",
          "value": "Any language recognized by the ITU"
        },
        {
          "modality": "text",
          "value": "English"
        },
        {
          "modality": "text",
          "value": "English, French, or Spanish"
        }
      ],
      "correctIndex": 2,
      "explanation": "A phone identification must be in English, not another language recognized by the UN or International Telecommunication Union (ITU).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "jek6t9ulexbd"
    },
    {
      "id": "ot-ht-l02-t1f05",
      "shape": "mcq",
      "tags": [
        "identification",
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What method of call sign identification is required for a station transmitting phone signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Send the call sign followed by the indicator RPT"
        },
        {
          "modality": "text",
          "value": "Send the call sign using a CW or phone emission"
        },
        {
          "modality": "text",
          "value": "Send the call sign followed by the indicator R"
        },
        {
          "modality": "text",
          "value": "Send the call sign using only a phone emission"
        }
      ],
      "correctIndex": 1,
      "explanation": "A phone station may send its call sign by continuous wave (CW) or phone emission. RPT or R indicators are not the required method.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bb8tm10hbppk"
    },
    {
      "id": "ot-ht-l02-t1f06",
      "shape": "mcq",
      "tags": [
        "identification",
        "call-signs"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following self-assigned indicators are acceptable when using a phone transmission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "KL7CC stroke W3"
        },
        {
          "modality": "text",
          "value": "KL7CC slant W3"
        },
        {
          "modality": "text",
          "value": "KL7CC slash W3"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "An indicator may be set off by the slant mark or a word denoting it, so stroke, slant and slash are all acceptable.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8etkez1p73gpj"
    },
    {
      "id": "ot-ht-l02-t1f07",
      "shape": "mcq",
      "tags": [
        "third-party",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following restrictions apply when a non-licensed person speaks to a foreign amateur radio station via a station under the control of an FCC-licensed amateur radio operator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The person must be a U.S. citizen"
        },
        {
          "modality": "text",
          "value": "The foreign station must be in a country with which the U.S. has a third-party agreement"
        },
        {
          "modality": "text",
          "value": "The licensed control operator must do the station identification"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "The foreign station must be in a country with a third-party agreement with the United States. Citizenship is not a restriction. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ixa05xhggmcx"
    },
    {
      "id": "ot-ht-l02-t1f08",
      "shape": "mcq",
      "tags": [
        "third-party",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the definition of third-party communications?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A message from a control operator to another control operator on behalf of another person"
        },
        {
          "modality": "text",
          "value": "Amateur radio communications where three stations are in communications with one another"
        },
        {
          "modality": "text",
          "value": "Operation when equipment is licensed to a person other than the control operator"
        },
        {
          "modality": "text",
          "value": "Temporary authorization for an unlicensed person to transmit for technical experiments"
        }
      ],
      "correctIndex": 0,
      "explanation": "Third-party communication is a message between control operators on behalf of another person, not three stations talking.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "glwrx61j5xhpg"
    },
    {
      "id": "ot-ht-l02-t1f09",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of amateur station simultaneously retransmits the signal of another amateur station on a different channel or channels?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Beacon station"
        },
        {
          "modality": "text",
          "value": "Remote control station"
        },
        {
          "modality": "text",
          "value": "Repeater station"
        },
        {
          "modality": "text",
          "value": "Message forwarding station"
        }
      ],
      "correctIndex": 2,
      "explanation": "A repeater simultaneously retransmits another station's transmission on a different channel or channels.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "12spddr74ncm3"
    },
    {
      "id": "ot-ht-l02-t1f10",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who is accountable if a repeater inadvertently retransmits communications that violate the FCC rules?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The control operator of the originating station"
        },
        {
          "modality": "text",
          "value": "The control operator of the repeater"
        },
        {
          "modality": "text",
          "value": "The owner of the repeater"
        },
        {
          "modality": "text",
          "value": "Both the originating station and the repeater owner"
        }
      ],
      "correctIndex": 0,
      "explanation": "The originating station's control operator is accountable. The repeater's control operator and owner are not for an inadvertent retransmission. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "flie961cg4zoc"
    },
    {
      "id": "ot-ht-l02-t1f11",
      "shape": "mcq",
      "tags": [
        "licensing",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a requirement for the issuance of a club station license grant?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The trustee must have an Amateur Extra Class operator license grant"
        },
        {
          "modality": "text",
          "value": "The club must have at least four members"
        },
        {
          "modality": "text",
          "value": "The club must be registered with the American Radio Relay League (ARRL)"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "A club must be composed of at least four persons. The trustee need not be Extra Class, and ARRL registration is not required.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "f7gezh1lhxzun"
    },
    {
      "id": "ht-l03-f-offset-2m",
      "shape": "fact",
      "tags": [
        "repeaters",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "2-Meter Repeater Offset",
      "body": "A common repeater offset in the 2-meter band is **plus or minus 600 kilohertz (kHz)**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A long horizontal frequency line across the middle, labeled 2-meter band, with lower frequencies to the left. At its center sits a blue marker for the repeater's output, with a small repeater tower icon above the line sending a downward signal arrow onto the marker. Two green markers sit at equal distances to the left and right of the output marker, each with a small handheld radio icon below the line sending an upward arrow toward the tower. A gold bracket joins the output marker to the left-hand marker, and a second gold bracket of the same length joins it to the right-hand marker. The left-hand bracket carries the label Input 600 kilohertz (kHz) below, and the right-hand bracket carries or 600 kHz above. A caption under everything gives the offset.",
        "imageSearchTerm": "The 2-meter repeater offset",
        "alt": "A 2-meter repeater's output frequency with two equal brackets beside it: the input sits 600 kilohertz (kHz) below or 600 kHz above, an offset of plus or minus 600 kHz.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-offset-2m.2ff65677.webp"
      },
      "uid": "k8r45iptxk3c"
    },
    {
      "id": "ht-l03-f-offset-70cm",
      "shape": "fact",
      "tags": [
        "repeaters",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "70-Centimeter Repeater Offset",
      "body": "A common repeater offset in the 70-centimeter band is **plus or minus 5 megahertz (MHz)**. The plus or minus 600 kilohertz (kHz) offset belongs to the 2-meter band instead.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two horizontal frequency strips, one above the other, drawn to one shared scale. The upper, larger strip is labeled 70-centimeter band. On it, a blue output marker sits left of center and a green input marker sits to its right; a gold bracket between them carries the 5 megahertz label. The upper strip's two markers carry the words Output and Input. The lower, smaller strip is labeled 2-meter band, with its own blue output marker and green input marker, unlabeled, joined by a gray bracket carrying the 600 kilohertz label. Because both strips share one scale, the 5 megahertz bracket is about eight times as long as the 600 kilohertz bracket.",
        "imageSearchTerm": "The 70-centimeter offset is wider",
        "alt": "Two repeater offsets drawn to one scale: plus or minus 5 megahertz (MHz) on the 70-centimeter band, and the much shorter plus or minus 600 kilohertz (kHz) on the 2-meter band.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-offset-70cm.50049a55.webp"
      },
      "uid": "1qj88ds14qqibq"
    },
    {
      "id": "ht-l03-f-offset-meaning",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Two rows side by side, one for the 2-meter band and one for the 70-centimeter band. Each row gives its band's common offset. A short line defines the offset as the gap between a repeater's transmit and receive frequencies.",
        "imageSearchTerm": "Common repeater offsets by band",
        "alt": "Common repeater offsets, the gap between a repeater's transmit and receive frequencies: plus or minus 600 kilohertz on 2 meters and 5 megahertz on 70 centimeters.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-offset-meaning.ab6aea14.webp"
      },
      "title": "What a Repeater Offset Is",
      "body": "A **repeater offset** is the difference between a repeater's transmit and receive frequencies. A repeater listens on one frequency and retransmits on another, and the gap between the two is the offset.",
      "uid": "1969pk31wrconb"
    },
    {
      "id": "ht-l03-f-calling-freq",
      "shape": "fact",
      "tags": [
        "bands",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "2-Meter Simplex Calling Frequency",
      "body": "The national calling frequency for frequency modulated (FM) simplex operation in the 2-meter band is **146.520 megahertz (MHz)**. A new licensee who wants a first simplex contact can start there.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two handheld radios, one at the left and one at the right, each with a display that reads 146.520. A double-headed radio-wave arrow runs straight between them, with no repeater, tower or third station anywhere. Under the arrow, a label names the frequency in full, and a second label says it is FM simplex, radio to radio. A caption at the bottom names it as the national calling frequency.",
        "imageSearchTerm": "The 2-meter simplex calling frequency",
        "alt": "Two handheld radios reading 146.520 talk directly, with no repeater: frequency modulated (FM) simplex on 146.520 megahertz (MHz), the 2-meter band's national calling frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-calling-freq.e323944b.webp"
      },
      "uid": "1bmqedb1tdry7n"
    },
    {
      "id": "ht-l03-f-simplex",
      "shape": "fact",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Simplex Operation",
      "body": "A station that transmits and receives on the same frequency is operating **simplex**. Nothing is retransmitted, so only stations within range of each other can talk.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two simple transceiver stations facing each other across a landscape line. One two-headed arrow joins them directly, with a single frequency tag on the arrow. A dashed circle around each station shows its range, and the two circles overlap. A greyed-out repeater tower sits off to one side with no arrows touching it.",
        "imageSearchTerm": "Simplex: one frequency, direct path",
        "alt": "Simplex: one frequency, direct path. Simplex stations transmit and receive on the same frequency directly, with no repeater, so they must be within range of each other.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-simplex.3cf29b68.webp"
      },
      "uid": "scvthav6fgky"
    },
    {
      "id": "ht-l03-f-band-plan",
      "shape": "fact",
      "tags": [
        "bands",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Band Plan Is",
      "body": "A **band plan** is a voluntary guideline for using different modes or activities within an amateur band. It goes beyond the privileges the Federal Communications Commission (FCC) establishes, and it is a courtesy agreement among operators.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A long horizontal band strip across the middle. Above it, a bracket spans the whole strip with the FCC privileges label. The strip is divided into four colored segments of different widths, labeled from left to right Morse code, Voice, Data and Repeaters. Below the strip, a second bracket spans the four segments with the band plan label. A small tag in the lower right corner reads Example layout.",
        "imageSearchTerm": "A band plan sorts modes by agreement",
        "alt": "A band split into example segments for Morse code, voice, data and repeaters: a band plan, a voluntary guideline operators agree on, on top of the Federal Communications Commission (FCC) privileges.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-band-plan.63b6cfe9.webp"
      },
      "uid": "uy90yumny436"
    },
    {
      "id": "ht-l03-f-cq-meaning",
      "shape": "fact",
      "tags": [
        "operating",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What CQ Means",
      "body": "The signal **CQ** means calling any station. An operator who sends it invites anyone who hears it to answer.",
      "uid": "b620nl1myrokz"
    },
    {
      "id": "ht-l03-f-answer-cq",
      "shape": "fact",
      "tags": [
        "operating",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Answering a CQ",
      "body": "The responding operator transmits the other station's **call sign** followed by his or her own call sign.",
      "uid": "4lmj4g18bu856"
    },
    {
      "id": "ht-l03-f-call-known",
      "shape": "fact",
      "tags": [
        "repeaters",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Calling a Known Station",
      "body": "To call a known station on a repeater, the operator says that station's **call sign**, then identifies with his or her own call sign.",
      "uid": "1nrnkwqzdlh9e"
    },
    {
      "id": "ht-l03-f-listening",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Announcing You Are Listening",
      "body": "On a repeater, a customary way to show that a station is looking for a contact is to say its own call sign followed by the word **listening**. Anyone hearing it may then call.",
      "uid": "49nm7lnkvrob"
    },
    {
      "id": "ht-l03-f-seek-phone",
      "shape": "fact",
      "tags": [
        "operating",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Three columns, one for each situation. Each column gives the words to transmit in order, with the call signs marked. The first column is answering a call to any station (CQ), the second is calling a known station on a repeater, and the third is seeking a contact without a repeater.",
        "imageSearchTerm": "Whose call sign comes first",
        "alt": "Whose call sign comes first in three situations: answering a call to any station (CQ), calling a known station on a repeater, and seeking a contact without a repeater.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-seek-phone.3aa98606.webp"
      },
      "title": "Seeking a Contact Without a Repeater",
      "body": "To seek any phone contact without a repeater, an effective way is to repeat **CQ** a few times, followed by the words this is and the operator's call sign. The operator then pauses to listen and repeats as necessary.",
      "uid": "7wh1j3e9nlmr"
    },
    {
      "id": "ht-l03-q-answer-cq",
      "shape": "mcq",
      "tags": [
        "identification",
        "operating"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee hears a station calling CQ and wants to answer. What does the licensee transmit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "CQ, then that station's call sign",
          "short": "CQ, then their call sign"
        },
        {
          "modality": "text",
          "value": "Your own call sign, then theirs"
        },
        {
          "modality": "text",
          "value": "That station's call sign, then your own",
          "short": "Their call sign, then yours"
        },
        {
          "modality": "text",
          "value": "A signal report, then your call sign",
          "short": "Report, then your call sign"
        }
      ],
      "correctIndex": 2,
      "explanation": "The other station's call sign comes first, then the responder's own. Repeating CQ would call everyone again, and no signal report is needed first.",
      "uid": "4vh5781vhct92"
    },
    {
      "id": "ht-l03-q-simplex-calling",
      "shape": "mcq",
      "tags": [
        "bands",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Two licensees in range want a first frequency modulated (FM) contact on 2 meters without a repeater. Which frequency, in megahertz (MHz), is the national calling frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "145.000 MHz"
        },
        {
          "modality": "text",
          "value": "146.520 MHz"
        },
        {
          "modality": "text",
          "value": "432.100 MHz"
        },
        {
          "modality": "text",
          "value": "446.000 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "146.520 MHz is the national calling frequency for FM simplex operation in the 2-meter band; the other figures are not.",
      "uid": "1ow1pdro0k44t"
    },
    {
      "id": "ht-l03-q-band-plan",
      "shape": "mcq",
      "tags": [
        "bands",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Beyond the privileges the Federal Communications Commission (FCC) sets, what is a band plan?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A list of operating schedules kept by a club",
          "short": "Club list of operating schedules"
        },
        {
          "modality": "text",
          "value": "A legal limit set by each license class",
          "short": "Limit set by license class"
        },
        {
          "modality": "text",
          "value": "A voluntary guideline for sharing a band's modes",
          "short": "Voluntary guideline on band use"
        },
        {
          "modality": "text",
          "value": "A list of available net frequencies in a band",
          "short": "Available net frequencies list"
        }
      ],
      "correctIndex": 2,
      "explanation": "A band plan is a voluntary courtesy guideline for how modes and activities share a band. The FCC, not the band plan, sets which frequencies a license class may use.",
      "uid": "137jonw1qx24hq"
    },
    {
      "id": "ht-l03-q-seek-contact",
      "shape": "mcq",
      "tags": [
        "operating",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee on a simplex frequency wants a voice contact with anyone. Which method works well?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Send a carrier with no voice, then listen",
          "short": "Carrier only, then listen"
        },
        {
          "modality": "text",
          "value": "Give a call sign once, then change frequency",
          "short": "Call sign once, then move"
        },
        {
          "modality": "text",
          "value": "Say break twice, then wait for any reply",
          "short": "Say break twice, then wait"
        },
        {
          "modality": "text",
          "value": "Repeat CQ, give your call sign, then listen",
          "short": "CQ, call sign, then listen"
        }
      ],
      "correctIndex": 3,
      "explanation": "Repeating CQ with a call sign and then pausing to listen invites any station to answer. A carrier alone or one call before moving on is not the effective method.",
      "uid": "y0x6nd190ozpt"
    },
    {
      "id": "ht-l03-q-offset-70cm",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee sets up for a 70-centimeter repeater. Which offset, in kilohertz (kHz) or megahertz (MHz), is a common one there?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Plus or minus 600 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 500 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 5 MHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 1 MHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "Plus or minus 5 megahertz is common on 70 centimeters. Plus or minus 600 kilohertz is the common 2-meter offset, so it is the tempting wrong choice.",
      "uid": "15fzs421rr7l0g"
    },
    {
      "id": "ht-l03-tf-listening",
      "shape": "trueFalse",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "On a repeater, a station customarily shows it is looking for a contact by saying its own call sign followed by the word listening.",
      "isTrue": true,
      "why": "Saying its own call sign and then listening is the customary way to show a station is available on a repeater.",
      "uid": "j9qhphb7e10p"
    },
    {
      "id": "ht-l03-tf-offset-70cm-wrong",
      "shape": "trueFalse",
      "tags": [
        "repeaters",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "In the 70-centimeter band, the common repeater offset is plus or minus 600 kilohertz (kHz).",
      "isTrue": false,
      "why": "On 70 centimeters the common offset is plus or minus 5 megahertz (MHz). Plus or minus 600 kHz is the common 2-meter offset.",
      "uid": "1dpmhug1yhl6f8"
    },
    {
      "id": "ht-l03-c-simplex",
      "shape": "cloze",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A station that transmits and receives on the same frequency is operating ___.",
      "answer": "simplex",
      "distractors": [
        "full duplex",
        "diplex",
        "multiplex"
      ],
      "explanation": "Simplex means one frequency for both sending and receiving, so only stations in range of each other can talk.",
      "uid": "r6q9sscjlms4"
    },
    {
      "id": "ht-l03-p-cq",
      "shape": "pair",
      "tags": [
        "operating",
        "identification"
      ],
      "linkedItemIds": [
        "ht-l03-d-cq"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Signal CQ"
      },
      "sideB": {
        "modality": "text",
        "value": "Calling any station"
      },
      "uid": "1jgqi9u1tyjmlu"
    },
    {
      "id": "ht-l03-f-reverse",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Reverse Function",
      "body": "Many very high frequency (VHF) and ultra high frequency (UHF) transceivers have a **reverse** function. It lets the operator listen on a repeater's input frequency, the one on which the repeater receives.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A repeater tower in the center. On the left, a handheld transceiver sends an arrow into the repeater, marked as the repeater input, the frequency the repeater receives on. On the right, an arrow leaves the repeater toward a second transceiver, marked as the repeater output, the frequency the repeater transmits on. A bracket between the two arrow labels marks the offset as the difference between them. Below, a small inset of the second transceiver with a highlighted 'reverse' button. A dashed arrow runs from that transceiver to the input frequency, showing it now listens on the input. Do not write any frequency values.",
        "imageSearchTerm": "Listening on the repeater's input",
        "alt": "Listening on the repeater's input. A repeater receives on one frequency and transmits on another, and the reverse function moves the radio to listen on the input frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-reverse.2581d5f8.webp"
      },
      "uid": "b21zsp63gald"
    },
    {
      "id": "ht-l03-f-ctcss",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "CTCSS Sub-Audible Tone",
      "body": "The **Continuous Tone-Coded Squelch System (CTCSS)** is a sub-audible tone. It is transmitted along with normal voice audio to open the squelch of a receiver.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a transmitting handheld radio. From it, a signal arrow carries two traces stacked together: a lively voice waveform on top and a slow, low, even sine wave beneath it. The voice trace is labeled Voice audio and the low wave Sub-audible tone, with a small brace grouping them as sent together. On the right, a receiving radio with a squelch gate drawn as an open gate in front of its speaker, and sound waves coming from the speaker. A label beside the gate says the squelch opens. The full name of CTCSS runs along the bottom as a caption.",
        "imageSearchTerm": "A sub-audible tone opens the squelch",
        "alt": "A radio sends voice audio together with a low sub-audible tone, and the tone opens the receiving radio's squelch: the Continuous Tone-Coded Squelch System (CTCSS).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-ctcss.b8d0fe30.webp"
      },
      "uid": "1pyehu47s111s"
    },
    {
      "id": "ht-l03-f-linked",
      "shape": "fact",
      "tags": [
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Linked Repeater Networks",
      "body": "A **linked repeater network** is a network of repeaters in which signals received by one repeater are transmitted by all the repeaters in the network. A call into one reaches the users of every other.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Four repeater towers spread across the frame, joined by link lines into one network. A transceiver at the lower left sends a single arrow into one tower. From every tower, including the first, transmit arcs go out to a small transceiver near it. Highlight the one receiving tower.",
        "imageSearchTerm": "One repeater in, every repeater out",
        "alt": "One repeater in, every repeater out. In a linked repeater network a signal received by one repeater is transmitted by all of them.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-linked.4f10c36d.webp"
      },
      "uid": "16t7xx83iyahw"
    },
    {
      "id": "ht-l03-f-access-causes",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why a Repeater Won't Open",
      "body": "An operator who can hear a repeater's output but cannot get in may have an improper transceiver **offset**. The wrong Continuous Tone-Coded Squelch System (CTCSS) tone or the wrong Digital Coded Squelch (DCS) code can cause the same problem.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transceiver on the left and a repeater on the right. The top arrow runs from the repeater to the transceiver and is marked as working: the output is heard. The bottom arrow runs from the transceiver toward the repeater and passes three checkpoint gates in a row. Each gate is marked with one possible cause. The arrow stops with an X before reaching the repeater.",
        "imageSearchTerm": "Hear the repeater but can't get in",
        "alt": "Hear the repeater but can't get in: the three settings that can stop a transmission from opening a repeater whose output the operator can hear.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-access-causes.7630c9fb.webp"
      },
      "uid": "tr5j2rdueyfj"
    },
    {
      "id": "ht-l03-f-audio-dropout",
      "shape": "fact",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Audio Dropping Out on Peaks",
      "body": "When frequency modulated (FM) transmission audio drops out on voice peaks, the operator is **talking too loudly**. The fix is to speak at a lower level.",
      "uid": "420fgo1p1dr1a"
    },
    {
      "id": "ht-l03-f-dtmf",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Two-Tone Signaling to Repeaters",
      "body": "**Dual-Tone Multi-Frequency (DTMF)** signaling to a repeater uses two simultaneous audio tones. A Continuous Tone-Coded Squelch System (CTCSS) tone is one sub-audible tone sent with voice.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. Left panel: a keypad press producing two sine waves drawn together at the same moment, both inside a band marked as audible, with an arrow toward a repeater. Right panel: a voice waveform with one low, small sine wave running underneath it, below the audible band line. An arrow goes to a receiver whose squelch opens.",
        "imageSearchTerm": "Two tones versus one sub-audible tone",
        "alt": "Two tones versus one sub-audible tone: dual-tone multi-frequency (DTMF) sends two audio tones at once; continuous tone-coded squelch system (CTCSS) sends one sub-audible tone with voice.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-dtmf.3798d232.webp"
      },
      "uid": "15yvgiy123t1pw"
    },
    {
      "id": "ht-l03-f-talkgroup-join",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Joining a Talkgroup",
      "body": "An operator joins a digital repeater's **talkgroup** by programming the radio with the group's ID or code.",
      "uid": "1yrxp0tsjcylb"
    },
    {
      "id": "ht-l03-f-negotiate",
      "shape": "fact",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Sharing a Contested Frequency",
      "body": "When two stations transmitting on the same frequency interfere with each other, the stations should **negotiate** continued use of the frequency.",
      "uid": "1sjzwj393po4b"
    },
    {
      "id": "ht-l03-f-simplex-channels",
      "shape": "fact",
      "tags": [
        "bands",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Simplex Channels Exist",
      "body": "Simplex channels are designated in the very high frequency and ultra high frequency band plans so that stations within range of each other can communicate **without tying up a repeater**.",
      "uid": "1y8g34hvum0of"
    },
    {
      "id": "ht-l03-f-qrm",
      "shape": "fact",
      "tags": [
        "interference",
        "operating"
      ],
      "linkedItemIds": [
        "ht-l03-d-qrm"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Q Signal QRM",
      "body": "**QRM** is a Q signal. It indicates that an operator is receiving interference from other stations.",
      "uid": "1h5j69ic50rrc"
    },
    {
      "id": "ht-l03-f-qsy",
      "shape": "fact",
      "tags": [
        "operating"
      ],
      "linkedItemIds": [
        "ht-l03-d-qsy"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Q Signal QSY",
      "body": "**QSY** is a Q signal. It indicates that an operator is changing frequency. A station might use it to tell a friend to move to a simplex channel.",
      "uid": "n7ya1q1leoz1c"
    },
    {
      "id": "ht-l03-f-color-code",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The DMR Color Code",
      "body": "On Digital Mobile Radio (DMR) systems, the digital **color code** is an access code that must be programmed into a DMR transmitter to access a specific repeater.",
      "uid": "1380ck36sr505"
    },
    {
      "id": "ht-l03-f-squelch",
      "shape": "fact",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Squelch Does",
      "body": "The purpose of **squelch** is to mute the receiver audio when a signal is not present.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, each with a receiver feeding a loudspeaker. Left panel: no incoming signal arrow, a closed gate symbol between the receiver and the speaker, and the speaker drawn silent with a mute slash. Right panel: an incoming signal arrow, the gate open, and sound arcs coming from the speaker.",
        "imageSearchTerm": "Squelch: muted until a signal arrives",
        "alt": "Squelch: muted until a signal arrives: the two states of squelch: receiver audio muted when no signal is present, audio heard when a signal is present.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-squelch.24f0c166.webp"
      },
      "uid": "vp200y1odg4js"
    },
    {
      "id": "ht-l03-f-talkgroup",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Talkgroup Is",
      "body": "A **talkgroup** is an identifier used by Digital Mobile Radio (DMR) to organize radio traffic, so that those who want to hear the group are not bothered by other radio traffic.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A digital repeater in the center carrying several streams of traffic, each drawn as a coloured ribbon with its own tag (Group A, Group B, Group C). On the right, one radio has a screen showing 'Group A ID'. Only the Group A ribbon reaches its speaker. The other ribbons pass by and fade without reaching it.",
        "imageSearchTerm": "How a talkgroup sorts traffic",
        "alt": "How a talkgroup sorts traffic on a digital repeater: a radio programmed with Group A's identifier hears Group A and is not bothered by other traffic.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-talkgroup.c64f10f6.webp"
      },
      "uid": "sr39cz1izjbu1"
    },
    {
      "id": "ht-l03-d-rf",
      "shape": "definition",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "RF"
      },
      "definition": {
        "modality": "text",
        "value": "Short for radio frequency, as defined in the Federal Communications Commission (FCC) rules",
        "short": "Radio frequency"
      },
      "uid": "16oo53o1bnguds"
    },
    {
      "id": "ht-l03-q-dtmf",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "What does DTMF signaling to a repeater use?"
      },
      "options": [
        {
          "modality": "text",
          "value": "One sub-audible tone with voice"
        },
        {
          "modality": "text",
          "value": "A color code set in a radio"
        },
        {
          "modality": "text",
          "value": "A talkgroup code in the radio"
        },
        {
          "modality": "text",
          "value": "Two simultaneous audio tones"
        }
      ],
      "correctIndex": 3,
      "explanation": "Dual-Tone Multi-Frequency (DTMF) sends two audio tones at once. A single sub-audible tone sent with voice is Continuous Tone-Coded Squelch System (CTCSS), the tempting wrong choice.",
      "uid": "168ek9sedc7ei"
    },
    {
      "id": "ht-l03-q-reverse",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee uses the reverse function on a very high frequency (VHF) or ultra high frequency (UHF) transceiver. What does the reverse function do?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Listens on the repeater's output frequency",
          "short": "Listens on repeater output"
        },
        {
          "modality": "text",
          "value": "Listens on the repeater's input frequency",
          "short": "Listens on repeater input"
        },
        {
          "modality": "text",
          "value": "Lowers the transmitter's power output",
          "short": "Lowers transmit power"
        },
        {
          "modality": "text",
          "value": "Raises the transmitter's power output",
          "short": "Raises transmit power"
        }
      ],
      "correctIndex": 1,
      "explanation": "Reverse lets the operator listen on the repeater's input frequency, the one on which the repeater receives. It does not change power output.",
      "uid": "1fpalkldaxgaz"
    },
    {
      "id": "ht-l03-q-peaks",
      "shape": "mcq",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A frequency modulated (FM) station's transmitted audio drops out on voice peaks. What is the likely cause?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The repeater offset is inverted"
        },
        {
          "modality": "text",
          "value": "The operator is talking too loudly",
          "short": "The operator talks too loudly"
        },
        {
          "modality": "text",
          "value": "The color code is wrong"
        },
        {
          "modality": "text",
          "value": "The repeater is linked to others"
        }
      ],
      "correctIndex": 1,
      "explanation": "Talking too loudly makes the audio drop out on peaks, so the fix is to speak lower. A wrong offset does not cause this.",
      "uid": "700cux1c4llej"
    },
    {
      "id": "ht-l03-q-qsy",
      "shape": "mcq",
      "tags": [
        "operating",
        "interference"
      ],
      "linkedItemIds": [
        "ht-l03-d-qsy",
        "ht-l03-d-qrm"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee hears another station send the Q signal QSY. What does QSY indicate?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Receiving interference from others",
          "short": "Receiving interference"
        },
        {
          "modality": "text",
          "value": "Listening on a repeater's input",
          "short": "Listening on repeater input"
        },
        {
          "modality": "text",
          "value": "Muting audio with no signal"
        },
        {
          "modality": "text",
          "value": "Changing to another frequency",
          "short": "Changing frequency"
        }
      ],
      "correctIndex": 3,
      "explanation": "QSY means changing frequency. The tempting wrong choice is the one about receiving interference from other stations, which is the meaning of QRM.",
      "uid": "1sspbo1hk390f"
    },
    {
      "id": "ht-l03-q-join-talkgroup",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee wants a Digital Mobile Radio (DMR) radio to join a talkgroup. What is needed?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Register with the local frequency coordinator",
          "short": "Register with a coordinator"
        },
        {
          "modality": "text",
          "value": "Register with the repeater's control operator",
          "short": "Register with control operator"
        },
        {
          "modality": "text",
          "value": "Program a keypad tone sequence for the group",
          "short": "Program a keypad tone sequence"
        },
        {
          "modality": "text",
          "value": "Program the group's ID or code into the radio",
          "short": "Program the group's ID or code"
        }
      ],
      "correctIndex": 3,
      "explanation": "A talkgroup is joined by programming the radio with its ID or code. No registration with a coordinator or control operator is involved.",
      "uid": "180b06n1rxv8ir"
    },
    {
      "id": "ht-l03-tf-access-offset",
      "shape": "trueFalse",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "An improper transceiver offset can be why a licensee hears a repeater's output but cannot access the repeater.",
      "isTrue": true,
      "why": "An improper offset, the wrong tone and the wrong Digital Coded Squelch code are all real causes of being unable to get into a repeater that can be heard.",
      "uid": "8t1m1m34loj2"
    },
    {
      "id": "ht-l03-tf-color-health",
      "shape": "trueFalse",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The Digital Mobile Radio (DMR) color code reports the health and status of a repeater's equipment.",
      "isTrue": false,
      "why": "The color code is an access code programmed into a DMR transmitter to reach a specific repeater. It does not report equipment health.",
      "uid": "1k0r76i7u1r50"
    },
    {
      "id": "ht-l03-tf-first-rights",
      "shape": "trueFalse",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "When two stations interfere on one frequency, they should negotiate continued use of it.",
      "isTrue": true,
      "why": "The stations should negotiate continued use of the frequency. Arriving first gives no preemptive rights.",
      "uid": "duutk11soilcd"
    },
    {
      "id": "ht-l03-c-squelch",
      "shape": "cloze",
      "tags": [
        "operating",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "The purpose of squelch is to ___ the receiver audio when a signal is not present.",
      "answer": "mute",
      "distractors": [
        "boost",
        "filter",
        "reverse"
      ],
      "explanation": "Squelch silences the receiver between transmissions so it does not put out constant noise.",
      "uid": "31ukq9524rcn"
    },
    {
      "id": "ht-l03-p-qrm",
      "shape": "pair",
      "tags": [
        "interference",
        "operating"
      ],
      "linkedItemIds": [
        "ht-l03-d-qrm"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Q signal QRM"
      },
      "sideB": {
        "modality": "text",
        "value": "Interference from other stations"
      },
      "uid": "pwc7cipd9jla"
    },
    {
      "id": "ht-l03-f-fcc-always",
      "shape": "fact",
      "tags": [
        "rules",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "FCC Rules Always Apply",
      "body": "The Federal Communications Commission (FCC) Part 97 rules **always apply** to an amateur station. They do not stop applying under Radio Amateur Civil Emergency Service, Amateur Radio Emergency Service, or Federal Emergency Management Agency rules.",
      "uid": "hqspc152fwgq"
    },
    {
      "id": "ht-l03-f-net-control",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Net Control Duties",
      "body": "The **net control station** calls the net to order and directs communications between stations checking in.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A hub-and-spoke layout. The net control station sits in the center with outgoing arrows to five participant stations around it. One participant has a highlighted return arrow, showing it was directed to transmit. The other participants have no return arrows. One participant at the edge has a separate arrow marked as an emergency exception.",
        "imageSearchTerm": "Net control directs the net",
        "alt": "Net control directs the net: the net control station at the center directing stations that check in, which transmit only when directed unless reporting an emergency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-net-control.2f5b9121.webp"
      },
      "uid": "1884rwdqzg4hn"
    },
    {
      "id": "ht-l03-f-phonetics",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Phonetics for Unusual Words",
      "body": "To make sure a voice message with unusual words is received correctly, the operator spells the words using a **standard phonetic alphabet**.",
      "uid": "1d7ub4l1avogtn"
    },
    {
      "id": "ht-l03-f-races",
      "shape": "fact",
      "tags": [
        "emergency",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What RACES Is",
      "body": "The **radio amateur civil emergency service (RACES)** is a Federal Communications Commission (FCC) Part 97 amateur radio service for civil defense communications during national emergencies. It requires certification by a civil defense agency.",
      "uid": "1c3q4yg18axbmk"
    },
    {
      "id": "ht-l03-f-traffic",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Traffic Means",
      "body": "In net operation, **traffic** means formal messages exchanged by net stations.",
      "uid": "k5a29aqqxq26"
    },
    {
      "id": "ht-l03-f-ares",
      "shape": "fact",
      "tags": [
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What ARES Is",
      "body": "The **Amateur Radio Emergency Service (ARES)** is a group of licensed amateurs who have voluntarily registered their qualifications and equipment for communications duty in the public service.",
      "uid": "18vldg41wacsyk"
    },
    {
      "id": "ht-l03-f-net-practice",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Standard Net Practice",
      "body": "Unless reporting an emergency, a net participant transmits **only when directed** by the net control station.",
      "uid": "1hy02rd2kfz59"
    },
    {
      "id": "ht-l03-f-winlink",
      "shape": "fact",
      "tags": [
        "emergency",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Winlink Email Relay",
      "body": "**Winlink** relays messages using email addresses based on amateur callsigns.",
      "uid": "413n881y3lgs8"
    },
    {
      "id": "ht-l03-f-outside-privileges",
      "shape": "fact",
      "tags": [
        "emergency",
        "control-operator"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Operating Outside Privileges",
      "body": "A control operator may operate outside the frequency privileges of his or her license class, **but only** in situations involving the immediate safety of human life or protection of property.",
      "uid": "1hjdqaa18nm4as"
    },
    {
      "id": "ht-l03-f-preamble",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Message Preamble",
      "body": "The **preamble** of a formal traffic message contains information needed to track the message.",
      "uid": "13484m61k3s5qy"
    },
    {
      "id": "ht-l03-f-check",
      "shape": "fact",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Check Means",
      "body": "The word **check** in a radiogram header means the number of words or word equivalents in the text portion of the message.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simplified message form. A top band is marked as the preamble, with one field inside it marked 'Check'; leave the other preamble fields as blank boxes. A larger lower block is the text portion, filled with gray placeholder bars for words. A curved arrow runs from the Check field to the text block, with a counting bracket over the word bars.",
        "imageSearchTerm": "Preamble and check on a radiogram",
        "alt": "Preamble and check on a radiogram. The preamble carries tracking information and its check field is the count of words in the text.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l03-f-check.da1dfd68.webp"
      },
      "uid": "1spwtz5j00xlx"
    },
    {
      "id": "ht-l03-f-civil-defense-cert",
      "shape": "fact",
      "tags": [
        "emergency",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Certification by Civil Defense",
      "body": "The **radio amateur civil emergency service (RACES)** requires certification by a civil defense agency. The Amateur Radio Emergency Service (ARES) is a voluntary registration instead.",
      "uid": "18xogts1oxh23q"
    },
    {
      "id": "ht-l03-q-net-transmit",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "During a net, a participant has no emergency to report. When does the participant transmit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Whenever the frequency is quiet"
        },
        {
          "modality": "text",
          "value": "Only when directed by net control",
          "short": "Only when net control directs"
        },
        {
          "modality": "text",
          "value": "As soon as the previous station ends",
          "short": "After the last station ends"
        },
        {
          "modality": "text",
          "value": "After giving a name and address"
        }
      ],
      "correctIndex": 1,
      "explanation": "Unless reporting an emergency, a participant transmits only when the net control station directs it. A quiet frequency or the end of another call is not permission.",
      "uid": "1uk9iztv3wx1"
    },
    {
      "id": "ht-l03-q-check-count",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A radiogram header shows a check. What does that number count?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The stations that relayed it"
        },
        {
          "modality": "text",
          "value": "The stations checking in"
        },
        {
          "modality": "text",
          "value": "The words in the message text"
        },
        {
          "modality": "text",
          "value": "The receipts marked on the form"
        }
      ],
      "correctIndex": 2,
      "explanation": "The check counts words or word equivalents in the text portion. It does not count relaying stations or net check-ins.",
      "uid": "4qn52t1qd0war"
    },
    {
      "id": "ht-l03-q-outside-privileges",
      "shape": "mcq",
      "tags": [
        "emergency",
        "control-operator"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "When may a control operator transmit outside the frequency privileges of his or her license class?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Whenever an emergency net has been activated",
          "short": "If an emergency net has been activated"
        },
        {
          "modality": "text",
          "value": "Whenever a local agency asks for help",
          "short": "If a local agency asks for help"
        },
        {
          "modality": "text",
          "value": "Whenever human life or property is at immediate risk",
          "short": "If life or property is at immediate risk"
        },
        {
          "modality": "text",
          "value": "Whenever the station runs from a portable site",
          "short": "If the station runs from a portable site"
        }
      ],
      "correctIndex": 2,
      "explanation": "Only situations involving the immediate safety of human life or protection of property allow it. An active net or an agency request does not by itself create that permission.",
      "uid": "17k8r3l436s8p"
    },
    {
      "id": "ht-l03-q-phonetic-scenario",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee must pass an unusual word by voice and be sure it is received correctly. What technique is used?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Send the word by voice and Morse code",
          "short": "Voice plus Morse code"
        },
        {
          "modality": "text",
          "value": "Repeat the word three times in a row",
          "short": "Repeat it three times"
        },
        {
          "modality": "text",
          "value": "Use the Q signal QSR to ask for a read-back",
          "short": "Use QSR for a read-back"
        },
        {
          "modality": "text",
          "value": "Spell it with a standard phonetic alphabet",
          "short": "Use a phonetic alphabet"
        }
      ],
      "correctIndex": 3,
      "explanation": "Spelling the word with a standard phonetic alphabet is the technique. Adding Morse code or sending QSR for a read-back is not.",
      "uid": "1hs6pmu1l2hof6"
    },
    {
      "id": "ht-l03-tf-races-def",
      "shape": "trueFalse",
      "tags": [
        "emergency",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The radio amateur civil emergency service (RACES) is an amateur radio service for civil defense communications during national emergencies.",
      "isTrue": true,
      "why": "RACES is a Federal Communications Commission (FCC) Part 97 amateur radio service for civil defense communications during national emergencies.",
      "uid": "1sxqzee1or505s"
    },
    {
      "id": "ht-l03-tf-ares-rules",
      "shape": "trueFalse",
      "tags": [
        "rules",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Under Amateur Radio Emergency Service (ARES) rules, Federal Communications Commission (FCC) Part 97 rules no longer apply to the station.",
      "isTrue": false,
      "why": "FCC Part 97 rules always apply to an amateur station, including during emergency operation.",
      "uid": "zb3yem1wfi7ca"
    },
    {
      "id": "ht-l03-c-traffic",
      "shape": "cloze",
      "tags": [
        "operating",
        "emergency"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "In net operation, ___ means formal messages exchanged by net stations.",
      "answer": "traffic",
      "distractors": [
        "check",
        "preamble",
        "net control"
      ],
      "explanation": "Traffic is the formal messages passed on a net. A check is a word count and a preamble helps track a message.",
      "uid": "a92s5y1k8csfc"
    },
    {
      "id": "ht-l03-p-winlink",
      "shape": "pair",
      "tags": [
        "emergency",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Winlink"
      },
      "sideB": {
        "modality": "text",
        "value": "Relays email via amateur callsigns"
      },
      "uid": "lda25v8jkidd"
    },
    {
      "id": "ht-l03-d-cq",
      "shape": "definition",
      "tags": [
        "operating",
        "identification"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "term": {
        "modality": "text",
        "value": "CQ"
      },
      "definition": {
        "modality": "text",
        "value": "Procedural signal meaning an operator is calling any station",
        "short": "Calling any station"
      },
      "uid": "1ibtw5jkjz10r"
    },
    {
      "id": "ht-l03-d-qrm",
      "shape": "definition",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "term": {
        "modality": "text",
        "value": "QRM"
      },
      "definition": {
        "modality": "text",
        "value": "Q signal meaning an operator is receiving interference from other stations",
        "short": "Receiving interference"
      },
      "uid": "1t3aeg8ryhoey"
    },
    {
      "id": "ht-l03-d-qsy",
      "shape": "definition",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "term": {
        "modality": "text",
        "value": "QSY"
      },
      "definition": {
        "modality": "text",
        "value": "Q signal meaning an operator is changing frequency",
        "short": "Changing frequency"
      },
      "uid": "3w9iefepcdzp"
    },
    {
      "id": "ot-ht-l03-t2a01",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a common repeater frequency offset in the 2-meter band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Plus or minus 5 MHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 600 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 500 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 1 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "Plus or minus 600 kHz is the common repeater offset on 2 meters. Plus or minus 5 MHz belongs to 70 centimeters.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1luz1gvk08rd7"
    },
    {
      "id": "ot-ht-l03-t2a03",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a common repeater frequency offset in the 70-centimeter band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Plus or minus 5 MHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 600 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 500 kHz"
        },
        {
          "modality": "text",
          "value": "Plus or minus 1 MHz"
        }
      ],
      "correctIndex": 0,
      "explanation": "Plus or minus 5 MHz is the common repeater offset on 70 centimeters. The 600 kHz figure is the 2-meter offset.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1isc8uyfleo4y"
    },
    {
      "id": "ot-ht-l03-t2a07",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the term \"repeater offset\" mean?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The difference between a repeater’s transmit and receive frequencies"
        },
        {
          "modality": "text",
          "value": "The repeater has a time delay to prevent interference"
        },
        {
          "modality": "text",
          "value": "The approximately half-second delay to allow for the “squelch tail” to be removed"
        },
        {
          "modality": "text",
          "value": "The fee charged by the repeater owner or club to provide for maintenance"
        }
      ],
      "correctIndex": 0,
      "explanation": "A repeater listens on one frequency and retransmits on another. The gap between them is the offset.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "y7gv3by9j4st"
    },
    {
      "id": "ot-ht-l03-t2a02",
      "shape": "mcq",
      "tags": [
        "bands",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the national calling frequency for FM simplex operations in the 2-meter band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "146.520 MHz"
        },
        {
          "modality": "text",
          "value": "145.000 MHz"
        },
        {
          "modality": "text",
          "value": "432.100 MHz"
        },
        {
          "modality": "text",
          "value": "446.000 MHz"
        }
      ],
      "correctIndex": 0,
      "explanation": "146.520 MHz is the national calling frequency for frequency modulated (FM) simplex operation on the 2-meter band.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1sdes611tq0uzt"
    },
    {
      "id": "ot-ht-l03-t2a11",
      "shape": "mcq",
      "tags": [
        "operating",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "What term describes an amateur station that is transmitting and receiving on the same frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Full duplex"
        },
        {
          "modality": "text",
          "value": "Diplex"
        },
        {
          "modality": "text",
          "value": "Simplex"
        },
        {
          "modality": "text",
          "value": "Multiplex"
        }
      ],
      "correctIndex": 2,
      "explanation": "A station that sends and receives on the same frequency is operating simplex.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8s4ruo14jth1w"
    },
    {
      "id": "ot-ht-l03-t2a10",
      "shape": "mcq",
      "tags": [
        "bands",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a band plan, beyond the privileges established by the FCC?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A voluntary guideline for using different modes or activities within an amateur band"
        },
        {
          "modality": "text",
          "value": "A list of operating schedules"
        },
        {
          "modality": "text",
          "value": "A list of available net frequencies"
        },
        {
          "modality": "text",
          "value": "A plan devised by a club to indicate frequency band usage"
        }
      ],
      "correctIndex": 0,
      "explanation": "A band plan is a voluntary guideline for modes and activities within a band. It goes beyond the privileges the Federal Communications Commission (FCC) grants.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "mj550ofdyfq8"
    },
    {
      "id": "ot-ht-l03-t2a05",
      "shape": "mcq",
      "tags": [
        "operating",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "How should you respond to a station calling CQ?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transmit \"CQ\" followed by the other station’s call sign"
        },
        {
          "modality": "text",
          "value": "Transmit your call sign followed by the other station’s call sign"
        },
        {
          "modality": "text",
          "value": "Transmit the other station’s call sign followed by your call sign"
        },
        {
          "modality": "text",
          "value": "Transmit a signal report followed by your call sign"
        }
      ],
      "correctIndex": 2,
      "explanation": "The responder sends the other station's call sign first, then their own. They do not repeat CQ (calling any station) or start with a report.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nne5vv1i51j7v"
    },
    {
      "id": "ot-ht-l03-t2a08",
      "shape": "mcq",
      "tags": [
        "operating",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the meaning of the procedural signal “CQ”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A shortened form of the term “Contest QSO”"
        },
        {
          "modality": "text",
          "value": "“Communication Quality,” used to indicate transmitted audio clarity"
        },
        {
          "modality": "text",
          "value": "Only the called station should transmit"
        },
        {
          "modality": "text",
          "value": "Calling any station"
        }
      ],
      "correctIndex": 3,
      "explanation": "CQ means calling any station. It invites anyone who hears it to answer. QSO means communicating directly with a station.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "u945be1hfq86"
    },
    {
      "id": "ot-ht-l03-t2a04",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an appropriate way to call another station on a repeater if you know the other station's call sign?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Say \"break, break,\" then the other station’s call sign, followed by your call sign"
        },
        {
          "modality": "text",
          "value": "Say the station's call sign, then identify with your call sign"
        },
        {
          "modality": "text",
          "value": "Say \"CQ\" three times, then the other station's call sign, followed by your call sign"
        },
        {
          "modality": "text",
          "value": "Wait for the station to call CQ, then answer with your call sign"
        }
      ],
      "correctIndex": 1,
      "explanation": "To call a known station on a repeater, say its call sign and then identify with your own. No CQ (calling any station) or break is needed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13dqpux1qvrt45"
    },
    {
      "id": "ot-ht-l03-t2a09",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a customary way to indicate a station is listening on a repeater and looking for a contact?"
      },
      "options": [
        {
          "modality": "text",
          "value": "“CQ CQ” followed by the repeater’s call sign"
        },
        {
          "modality": "text",
          "value": "The station’s call sign followed by the word “listening”"
        },
        {
          "modality": "text",
          "value": "The repeater’s call sign followed by the station’s call sign"
        },
        {
          "modality": "text",
          "value": "“QSY” followed by your call sign"
        }
      ],
      "correctIndex": 1,
      "explanation": "Saying your own call sign followed by the word listening is the customary way to show you are available on a repeater. QSY means changing frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ycxa5fsejq7r"
    },
    {
      "id": "ot-ht-l03-t2a06",
      "shape": "mcq",
      "tags": [
        "operating",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an effective way to seek a call from any phone station when not using a repeater?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Sign call once, then “listening for a call;” if no answer, change frequency and repeat"
        },
        {
          "modality": "text",
          "value": "Say “QTC,” then “this is” and your call sign; if no answer, change frequency and repeat"
        },
        {
          "modality": "text",
          "value": "Send unmodulated carrier ~10 seconds, then “this is” and call sign; listen; repeat"
        },
        {
          "modality": "text",
          "value": "Repeat “CQ” a few times, “this is” and your call sign, then listen; repeat as needed"
        }
      ],
      "correctIndex": 3,
      "explanation": "Repeat CQ (calling any station) a few times, say this is and your call sign, then pause to listen. Repeat as necessary. QTC means messages to send.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "15l7i9dihrhn"
    },
    {
      "id": "ot-ht-l03-t2b01",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the purpose of the reverse function on a VHF/UHF transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To reduce power output"
        },
        {
          "modality": "text",
          "value": "To increase power output"
        },
        {
          "modality": "text",
          "value": "To listen on a repeater’s input frequency"
        },
        {
          "modality": "text",
          "value": "To listen on a repeater’s output frequency"
        }
      ],
      "correctIndex": 2,
      "explanation": "Reverse lets the operator listen on the repeater's input frequency. It does not change power output.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1vys6jdijw1qb"
    },
    {
      "id": "ot-ht-l03-t2b03",
      "shape": "mcq",
      "tags": [
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following describes a linked repeater network?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Repeaters in a network all transmit the signals received by any one repeater"
        },
        {
          "modality": "text",
          "value": "A single repeater with more than one receiver"
        },
        {
          "modality": "text",
          "value": "Multiple repeaters with the same control operator"
        },
        {
          "modality": "text",
          "value": "A system of repeaters linked by APRS"
        }
      ],
      "correctIndex": 0,
      "explanation": "In a linked network, signals received by one repeater are transmitted by all the repeaters in it. APRS stands for Automatic Packet Reporting System.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "i39ndihuahje"
    },
    {
      "id": "ot-ht-l03-t2b04",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following could be the reason you are unable to access a repeater whose output you can hear?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Improper transceiver offset"
        },
        {
          "modality": "text",
          "value": "You are using the wrong CTCSS tone"
        },
        {
          "modality": "text",
          "value": "You are using the wrong DCS code"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "An improper offset, the wrong Continuous Tone-Coded Squelch System (CTCSS) tone and the wrong Digital Coded Squelch (DCS) code are each real causes of being unable to access a repeater you can hear, so all choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "gl0bd5jn5n3x"
    },
    {
      "id": "ot-ht-l03-t2b02",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What term describes the use of a sub-audible tone transmitted along with normal voice audio to open the squelch of a receiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Carrier squelch"
        },
        {
          "modality": "text",
          "value": "Tone burst"
        },
        {
          "modality": "text",
          "value": "DTMF"
        },
        {
          "modality": "text",
          "value": "CTCSS"
        }
      ],
      "correctIndex": 3,
      "explanation": "Continuous Tone-Coded Squelch System (CTCSS) is a sub-audible tone sent with normal voice audio to open a receiver's squelch. DTMF stands for Dual-Tone Multi-Frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "yf17li1ofpwnc"
    },
    {
      "id": "ot-ht-l03-t2b06",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of signaling to a repeater uses two simultaneous audio tones?"
      },
      "options": [
        {
          "modality": "text",
          "value": "DTMF"
        },
        {
          "modality": "text",
          "value": "CTCSS"
        },
        {
          "modality": "text",
          "value": "GMRS"
        },
        {
          "modality": "text",
          "value": "D-STAR"
        }
      ],
      "correctIndex": 0,
      "explanation": "Dual-Tone Multi-Frequency (DTMF) uses two simultaneous audio tones. Continuous Tone-Coded Squelch System (CTCSS) is a single sub-audible tone. GMRS stands for General Mobile Radio Service and D-STAR stands for Digital Smart Technologies for Amateur Radio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "r2gqpr1kaaekl"
    },
    {
      "id": "ot-ht-l03-t2b05",
      "shape": "mcq",
      "tags": [
        "operating",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following would cause your FM transmission audio to drop out on voice peaks?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Your repeater offset is inverted"
        },
        {
          "modality": "text",
          "value": "Your FM deviation is too low"
        },
        {
          "modality": "text",
          "value": "You are talking too loudly"
        },
        {
          "modality": "text",
          "value": "Your transmit power is too high"
        }
      ],
      "correctIndex": 2,
      "explanation": "Audio that drops out on voice peaks means the operator is talking too loudly. A wrong offset does not cause it. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "15kc7u04f51bm"
    },
    {
      "id": "ot-ht-l03-t2b13",
      "shape": "mcq",
      "tags": [
        "operating",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the purpose of a squelch function?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Reduce a CW transmitter's key clicks"
        },
        {
          "modality": "text",
          "value": "Mute the receiver audio when a signal is not present"
        },
        {
          "modality": "text",
          "value": "Eliminate parasitic oscillations in an RF amplifier"
        },
        {
          "modality": "text",
          "value": "Reduce interference from impulse noise"
        }
      ],
      "correctIndex": 1,
      "explanation": "Squelch mutes the receiver audio when no signal is present. CW stands for continuous wave and RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "exei2o178uaa4"
    },
    {
      "id": "ot-ht-l03-t2b07",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "How can you join a digital repeater’s “talkgroup”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Register with the local Frequency Coordinator"
        },
        {
          "modality": "text",
          "value": "Register with the digital repeater control operator"
        },
        {
          "modality": "text",
          "value": "Program your radio with the group’s ID or code"
        },
        {
          "modality": "text",
          "value": "Program your radio with the DTMF tone used by the talkgroup"
        }
      ],
      "correctIndex": 2,
      "explanation": "A talkgroup is joined by programming the radio with the group's ID or code. No registration is needed. DTMF stands for Dual-Tone Multi-Frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "11u2twk1b7u620"
    },
    {
      "id": "ot-ht-l03-t2b12",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the digital color code used on DMR repeater systems?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An access code programmed into a DMR transmitter to access a specific repeater"
        },
        {
          "modality": "text",
          "value": "A code which automatically programs the repeater offset to a frequency chosen by the user"
        },
        {
          "modality": "text",
          "value": "A code identifying the CODEC used so the repeater can properly decode the audio"
        },
        {
          "modality": "text",
          "value": "A code transmitted by the repeater to indicate health and status of the equipment"
        }
      ],
      "correctIndex": 0,
      "explanation": "The color code is an access code programmed into a Digital Mobile Radio (DMR) transmitter to reach a specific repeater. It does not set the offset. CODEC stands for coder-decoder.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ljczz3bd31x3"
    },
    {
      "id": "ot-ht-l03-t2b14",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a “talkgroup”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A group of amateur radio operators who share email on a specific amateur radio topic"
        },
        {
          "modality": "text",
          "value": "A DMR identifier that organizes traffic so listeners aren't bothered by other traffic"
        },
        {
          "modality": "text",
          "value": "The members of a net organized for amateur radio operators with a specific common interest"
        },
        {
          "modality": "text",
          "value": "Automatically alerts all members to the frequency where any member is transmitting"
        }
      ],
      "correctIndex": 1,
      "explanation": "A talkgroup is an identifier Digital Mobile Radio (DMR) uses to organize traffic, so listeners are not bothered by other traffic.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1b171qiot5ehy"
    },
    {
      "id": "ot-ht-l03-t2b08",
      "shape": "mcq",
      "tags": [
        "interference",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following applies when two stations transmitting on the same frequency interfere with each other?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The stations should negotiate continued use of the frequency"
        },
        {
          "modality": "text",
          "value": "Both stations should choose another frequency to avoid conflict"
        },
        {
          "modality": "text",
          "value": "Whichever station was on the frequency first has preemptive rights to the frequency"
        },
        {
          "modality": "text",
          "value": "Use subaudible tones so both stations can share the frequency"
        }
      ],
      "correctIndex": 0,
      "explanation": "Interfering stations on one frequency should negotiate continued use. Arriving first gives no preemptive rights.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "m641rl1l09u61"
    },
    {
      "id": "ot-ht-l03-t2b09",
      "shape": "mcq",
      "tags": [
        "bands",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why are simplex channels designated in the VHF/UHF band plans?"
      },
      "options": [
        {
          "modality": "text",
          "value": "So stations within range of each other can communicate without tying up a repeater"
        },
        {
          "modality": "text",
          "value": "For contest operation"
        },
        {
          "modality": "text",
          "value": "For working DX only"
        },
        {
          "modality": "text",
          "value": "So stations with simple transmitters can access the repeater without automated offset"
        }
      ],
      "correctIndex": 0,
      "explanation": "Simplex channels let stations within range talk without tying up a repeater. DX means long distance.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "6adr0s6z4lf0"
    },
    {
      "id": "ot-ht-l03-t2b10",
      "shape": "mcq",
      "tags": [
        "interference",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which Q signal indicates that you are receiving interference from other stations?"
      },
      "options": [
        {
          "modality": "text",
          "value": "QRM"
        },
        {
          "modality": "text",
          "value": "QRN"
        },
        {
          "modality": "text",
          "value": "QTH"
        },
        {
          "modality": "text",
          "value": "QSB"
        }
      ],
      "correctIndex": 0,
      "explanation": "QRM means receiving interference from other stations. The other choices are QRN (troubled by static), QTH (location) and QSB (fading signals).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ml4d6mih638i"
    },
    {
      "id": "ot-ht-l03-t2b11",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which Q signal indicates that you are changing frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "QRU"
        },
        {
          "modality": "text",
          "value": "QSY"
        },
        {
          "modality": "text",
          "value": "QSL"
        },
        {
          "modality": "text",
          "value": "QRZ"
        }
      ],
      "correctIndex": 1,
      "explanation": "QSY means changing frequency. The other choices are QRU (have you anything for me?), QSL (acknowledging receipt) and QRZ (who is calling me?).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "m96zznq4li8z"
    },
    {
      "id": "ot-ht-l03-t2c02",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following are typical duties of a Net Control Station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Choose the regular net meeting time and frequency"
        },
        {
          "modality": "text",
          "value": "Ensure all stations checking in are properly licensed for the net frequency"
        },
        {
          "modality": "text",
          "value": "Call the net to order and direct communications between stations checking in"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "The net control station calls the net to order and directs communications between stations checking in.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1dpnspl13x7vfr"
    },
    {
      "id": "ot-ht-l03-t2c07",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is standard practice when you participate in a net?"
      },
      "options": [
        {
          "modality": "text",
          "value": "On first response, give call sign, name, and address as in the FCC database"
        },
        {
          "modality": "text",
          "value": "Record the time of each of your transmissions"
        },
        {
          "modality": "text",
          "value": "Unless reporting an emergency, transmit only when directed by the net control station"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Unless reporting an emergency, a participant transmits only when directed by net control. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "80ljegasvv8m"
    },
    {
      "id": "ot-ht-l03-t2c05",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the term “traffic” refer to in net operation?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Formal messages exchanged by net stations"
        },
        {
          "modality": "text",
          "value": "The number of stations checking in and out of a net"
        },
        {
          "modality": "text",
          "value": "Operation by mobile or portable stations"
        },
        {
          "modality": "text",
          "value": "A count of the number of activations of the net each month"
        }
      ],
      "correctIndex": 0,
      "explanation": "In net operation, traffic means formal messages exchanged by net stations, not a count of check-ins.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "17ld9j15jxs3z"
    },
    {
      "id": "ot-ht-l03-t2c10",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "What information is contained in the preamble of a formal traffic message?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The email address of the originating station"
        },
        {
          "modality": "text",
          "value": "The address of the intended recipient"
        },
        {
          "modality": "text",
          "value": "The telephone number of the addressee"
        },
        {
          "modality": "text",
          "value": "Information needed to track the message"
        }
      ],
      "correctIndex": 3,
      "explanation": "The preamble holds the information needed to track the message.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1j2j6se16ckioq"
    },
    {
      "id": "ot-ht-l03-t2c11",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is meant by “check” in a radiogram header?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The number of words or word equivalents in the text portion of the message"
        },
        {
          "modality": "text",
          "value": "The call sign of the originating station"
        },
        {
          "modality": "text",
          "value": "A list of stations that have relayed the message"
        },
        {
          "modality": "text",
          "value": "A box on the message form that indicates that the message was received and/or relayed"
        }
      ],
      "correctIndex": 0,
      "explanation": "Check is the number of words or word equivalents in the text portion of the message.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1knoc9tps62lj"
    },
    {
      "id": "ot-ht-l03-t2c03",
      "shape": "mcq",
      "tags": [
        "operating",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "What technique is used to ensure that voice messages containing unusual words are received correctly?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Send the words by voice and Morse code"
        },
        {
          "modality": "text",
          "value": "Use the Q-code “QSR” to ask the receiving station to repeat the words back"
        },
        {
          "modality": "text",
          "value": "Spell the words using a standard phonetic alphabet"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Spelling unusual words with a standard phonetic alphabet is the technique. Adding Morse code is not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "szwny1qjt4rc"
    },
    {
      "id": "ot-ht-l03-t2c01",
      "shape": "mcq",
      "tags": [
        "rules",
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "When do the FCC Part 97 Amateur Radio Service rules NOT apply to the operation of an amateur station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When operating under RACES rules"
        },
        {
          "modality": "text",
          "value": "When operating under FEMA rules"
        },
        {
          "modality": "text",
          "value": "When operating under ARES rules"
        },
        {
          "modality": "text",
          "value": "FCC rules always apply"
        }
      ],
      "correctIndex": 3,
      "explanation": "Federal Communications Commission (FCC) Part 97 rules always apply to an amateur station, including under radio amateur civil emergency service (RACES), Amateur Radio Emergency Service (ARES) or Federal Emergency Management Agency (FEMA) rules.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "pg4duy1hxr7wy"
    },
    {
      "id": "ot-ht-l03-t2c09",
      "shape": "mcq",
      "tags": [
        "emergency",
        "control-operator"
      ],
      "prompt": {
        "modality": "text",
        "value": "Are amateur station control operators ever permitted to operate outside the frequency privileges of their license class?"
      },
      "options": [
        {
          "modality": "text",
          "value": "No"
        },
        {
          "modality": "text",
          "value": "Yes, but only when part of a FEMA emergency plan"
        },
        {
          "modality": "text",
          "value": "Yes, but only when part of a RACES emergency plan"
        },
        {
          "modality": "text",
          "value": "Yes, but only for the immediate safety of human life or protection of property"
        }
      ],
      "correctIndex": 3,
      "explanation": "Operating outside license frequency privileges is allowed only for the immediate safety of human life or protection of property. FEMA stands for Federal Emergency Management Agency and RACES stands for radio amateur civil emergency service.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1whmltr1foo6s7"
    },
    {
      "id": "ot-ht-l03-t2c04",
      "shape": "mcq",
      "tags": [
        "emergency",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is RACES?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An emergency organization combining amateur and citizens band operators and frequencies"
        },
        {
          "modality": "text",
          "value": "An international radio experimentation society"
        },
        {
          "modality": "text",
          "value": "A radio contest held in a short period, sometimes called a “sprint”"
        },
        {
          "modality": "text",
          "value": "An FCC Part 97 amateur service for civil defense communications in national emergencies"
        }
      ],
      "correctIndex": 3,
      "explanation": "RACES is a Federal Communications Commission (FCC) Part 97 amateur radio service for civil defense communications during national emergencies.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ub9ow31x7159f"
    },
    {
      "id": "ot-ht-l03-t2c06",
      "shape": "mcq",
      "tags": [
        "emergency"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the Amateur Radio Emergency Service (ARES)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Licensed amateurs who registered qualifications and equipment for public service duty"
        },
        {
          "modality": "text",
          "value": "Licensed military amateurs who volunteered message handling service in an emergency"
        },
        {
          "modality": "text",
          "value": "A training program offering license courses for those wanting a license for emergencies"
        },
        {
          "modality": "text",
          "value": "A training program certifying operators to join the Radio Amateur Civil Emergency Service"
        }
      ],
      "correctIndex": 0,
      "explanation": "ARES is a group of licensed amateurs who voluntarily registered their qualifications and equipment for public service communications duty.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "14zjmz312w2rzb"
    },
    {
      "id": "ot-ht-l03-t2c12",
      "shape": "mcq",
      "tags": [
        "emergency",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following requires certification by a civil defense agency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "ARES"
        },
        {
          "modality": "text",
          "value": "RACES"
        },
        {
          "modality": "text",
          "value": "MARS"
        },
        {
          "modality": "text",
          "value": "SKYWARN"
        }
      ],
      "correctIndex": 1,
      "explanation": "Radio amateur civil emergency service (RACES) requires certification by a civil defense agency. Amateur Radio Emergency Service (ARES) is voluntary registration. MARS is the Military Auxiliary Radio System; SKYWARN is the National Weather Service's volunteer severe weather spotter program.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ubo76b1s6ir5x"
    },
    {
      "id": "ot-ht-l03-t2c08",
      "shape": "mcq",
      "tags": [
        "emergency",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following relays messages using email addresses based on amateur callsigns?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Winlink"
        },
        {
          "modality": "text",
          "value": "FT8"
        },
        {
          "modality": "text",
          "value": "PSK31"
        },
        {
          "modality": "text",
          "value": "AMTOR"
        }
      ],
      "correctIndex": 0,
      "explanation": "Winlink relays messages using email addresses based on amateur callsigns. AMTOR stands for Amateur Teleprinting Over Radio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "p7nhvryp6lxl"
    },
    {
      "id": "ht-l04-f-multipath-fading",
      "shape": "fact",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Signals Change Over Feet",
      "body": "**Multipath propagation** means a signal reaches the receiver by more than one path. The signals from the different paths combine at the antenna, and they cancel or reinforce each other. That is why very high frequency (VHF) signal strength can vary greatly when an antenna is moved only a few feet.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transmitting tower at the far left and a tall building at the top center. Two paths leave the tower: a direct path straight to the right, and a reflected path that bounces off the building and comes down to the right. At the right, both paths reach two antenna positions close together, with a small bracket between the positions labeled a few feet. Beside the first position, two small waves drawn one above the other are in step, crest over crest, with a tall signal-strength bar. Beside the second position, the two small waves are out of step, crest over trough, with a short bar.",
        "imageSearchTerm": "Moving the Antenna a Few Feet",
        "alt": "A direct and a reflected signal reach two antenna spots a few feet apart: in step at one, where they reinforce, and out of step at the other, where they cancel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-multipath-fading.04d09c68.webp"
      },
      "uid": "2iy9as129c51u"
    },
    {
      "id": "ht-l04-f-vegetation-absorbs",
      "shape": "fact",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Vegetation and Microwave Signals",
      "body": "Vegetation **absorbs** ultra high frequency (UHF) and microwave signals. The result is poor reception of weak signals.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transmitting antenna at the left and a receiving antenna at the right, with a stand of leafy trees between them. A wave enters the trees from the left with tall peaks, shrinks steadily inside the canopy, and leaves the trees on the right with small peaks, in the same blue throughout. The receiving antenna has a short signal-strength bar.",
        "imageSearchTerm": "Vegetation Absorbs the Signal",
        "alt": "An ultra high frequency (UHF) or microwave signal shrinks as it passes through a stand of trees, which absorb it, and reaches the receiving antenna weak.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-vegetation-absorbs.17164432.webp"
      },
      "uid": "e8e0m71aazmdr"
    },
    {
      "id": "ht-l04-f-horizontal-weak-signal",
      "shape": "fact",
      "tags": [
        "antennas",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Polarization for Long-Distance Contacts",
      "body": "Long-distance contacts by CW (international Morse code telegraphy) and single sideband (SSB) on the very high frequency (VHF) and ultra high frequency (UHF) bands normally use **horizontal polarization**.",
      "uid": "xr0ucivfvtfo"
    },
    {
      "id": "ht-l04-f-cross-polarization",
      "shape": "fact",
      "tags": [
        "antennas",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Cost of Cross-Polarization",
      "body": "**Cross-polarization** of the antennas over a line-of-sight very high frequency (VHF) or ultra high frequency (UHF) path reduces received signal strength.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A flat landscape with a clear straight line-of-sight path between two stations. At the left is a transmitting antenna drawn as a vertical rod. At the right is a receiving antenna drawn as a horizontal rod. A straight signal arrow runs between them. It is thick at the transmitter and drawn thinner and fainter as it reaches the horizontal antenna. A small signal-strength bar beside the receiver shows a low reading.",
        "imageSearchTerm": "Cross-Polarized Antennas on a Line-of-Sight Path",
        "alt": "Cross-Polarized Antennas on a Line-of-Sight Path. A vertical antenna talking to a horizontal one over a line-of-sight path gives a weaker received signal.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-cross-polarization.382b6589.webp"
      },
      "uid": "1njtstz1lb8prb"
    },
    {
      "id": "ht-l04-f-reflected-path",
      "shape": "fact",
      "tags": [
        "propagation",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transmitter on one side and a receiving antenna on the other. A straight direct path runs between them. A second path leaves the transmitter, bounces off a plain wall or surface, and reaches the same receiving antenna. Both paths meet at the antenna, where a small note says the two signals combine there.",
        "imageSearchTerm": "Two Paths Meeting at the Antenna",
        "alt": "Two Paths Meeting at the Antenna: how one signal that arrives by two paths can cancel or reinforce itself at the receiving antenna.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-reflected-path.90d9e0ce.webp"
      },
      "title": "Reaching a Repeater Around Obstacles",
      "body": "A station with a directional antenna may be blocked from a distant repeater by buildings or other obstructions. That station can try to find a **reflected path** that carries signals to the repeater.",
      "uid": "16hka1nm8c0bl"
    },
    {
      "id": "ht-l04-f-picket-fencing",
      "shape": "fact",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Picket Fencing on Mobile Signals",
      "body": "**Picket fencing** is the rapid flutter heard on mobile signals due to multipath propagation.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A flat street scene: a car with a roof antenna drives to the right past a row of buildings, with a motion arrow behind it. A distant tower at the left sends a direct path to the car and several reflected paths that bounce off the buildings to it. Above the scene, a strip chart of signal strength against time shows a rapid series of sharp dips, like the pickets of a fence.",
        "imageSearchTerm": "Picket Fencing on a Moving Car",
        "alt": "A car with a roof antenna drives past buildings that reflect a tower's signal along several paths, and a strength chart above shows the rapid flutter called picket fencing.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-picket-fencing.792071a9.webp"
      },
      "uid": "1twh2kwoeq2ny"
    },
    {
      "id": "ht-l04-f-precipitation-microwave",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Weather That Shortens Microwave Range",
      "body": "**Precipitation** might decrease range at microwave frequencies.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, each showing a transmitting antenna at the left sending a signal arrow through a band of falling rain to a receiving antenna at the right. In the left panel, marked 10 and 6 meters, the arrow passes through the rain at full width and reaches the receiver. In the right panel, marked microwave, the arrow thins inside the rain and ends short of the receiving antenna, showing reduced range.",
        "imageSearchTerm": "Rain on 10 and 6 Meters Versus Microwaves",
        "alt": "Rain on 10 and 6 Meters Versus Microwaves: fog or rain barely affects 10- and 6-meter signals, while precipitation can shorten range at microwave frequencies.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-precipitation-microwave.270a7c15.webp"
      },
      "uid": "agnnzmgu5qxs"
    },
    {
      "id": "ht-l04-f-ionospheric-fading",
      "shape": "fact",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Irregular Fading on Ionospheric Paths",
      "body": "A likely cause of irregular **fading** of signals propagated by the ionosphere is random combining of signals arriving via different paths.",
      "uid": "dsdk8so2tydk"
    },
    {
      "id": "ht-l04-f-elliptical-polarization",
      "shape": "fact",
      "tags": [
        "antennas",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ionospheric Signals Are Elliptically Polarized",
      "body": "Signals propagated by the ionosphere are **elliptically polarized**. As a result, either vertically or horizontally polarized antennas may be used for transmission or reception.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A gently curved Earth surface along the bottom and a broad arched band high above it for the ionosphere. A signal path rises from a transmitting antenna at the far left, bends back from the ionosphere and comes down at the right. On the descending path, a small ellipse drawn with an arrow around it marks the signal's elliptical polarization. At the right, two receiving antennas stand side by side: a vertical rod and a horizontal rod on a short mast. Each has a green check mark. A caption under them says either one may be used.",
        "imageSearchTerm": "Either Antenna Works on an Ionospheric Signal",
        "alt": "A signal returned by the ionosphere arrives elliptically polarized, and a vertical and a horizontal receiving antenna both carry a check mark: either one may be used.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-elliptical-polarization.9091442b.webp"
      },
      "uid": "ehx6a41tvhyfa"
    },
    {
      "id": "ht-l04-f-multipath-data-errors",
      "shape": "fact",
      "tags": [
        "propagation",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Multipath and Data Errors",
      "body": "Multipath propagation makes **error rates** likely to increase on data transmissions.",
      "uid": "mareqf2n4ivb"
    },
    {
      "id": "ht-l04-f-ionosphere-reflects-hf",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Region That Reflects HF",
      "body": "The **ionosphere** is the region of the atmosphere that can reflect high frequency (HF) radio waves.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view of a gently curved Earth surface with a shaded band high above it for the ionosphere. A transmitting antenna sits at the left. One path, marked HF, rises at an angle, bends back at the ionosphere band and comes down to a receiving antenna far to the right, past the curve of the Earth. A second path, marked UHF, rises from the same antenna and passes straight up through the ionosphere band and keeps going into space, without returning.",
        "imageSearchTerm": "The Ionosphere Returns HF to Earth",
        "alt": "The ionosphere reflects high frequency (HF) waves back to Earth for long-distance contacts, while ultra high frequency (UHF) is usually not propagated by it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-ionosphere-reflects-hf.597f8587.webp"
      },
      "uid": "r72u2k10mgdpq"
    },
    {
      "id": "ht-l04-f-fog-rain-6-10",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Fog and Rain on 10 and 6 Meters",
      "body": "Fog or rain has **little effect** on 10-meter and 6-meter band signals.",
      "uid": "c8giyv1d15z1f"
    },
    {
      "id": "ht-l04-q-handheld-fade",
      "shape": "mcq",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A handheld very high frequency (VHF) signal fades, then returns, when the operator steps two feet sideways. What is the likely cause?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Water vapor along the path"
        },
        {
          "modality": "text",
          "value": "Doppler shifts in frequency"
        },
        {
          "modality": "text",
          "value": "Multipath adding and cancelling"
        },
        {
          "modality": "text",
          "value": "Ionospheric path sensitivity"
        }
      ],
      "correctIndex": 2,
      "explanation": "Signals arriving by several paths add or cancel at the antenna, so a few feet of movement changes strength. Water vapor, Doppler shifts and ionospheric path length do not explain it.",
      "uid": "1js1b6e14ds8um"
    },
    {
      "id": "ht-l04-q-blocked-repeater",
      "shape": "mcq",
      "tags": [
        "propagation",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A station with a directional antenna cannot reach a distant repeater because buildings block the direct path. What might work?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Switch to horizontal polarization",
          "short": "Switch polarization"
        },
        {
          "modality": "text",
          "value": "Try the long path instead"
        },
        {
          "modality": "text",
          "value": "Increase the standing wave ratio"
        },
        {
          "modality": "text",
          "value": "Find a path that reflects signals",
          "short": "Find a reflecting path"
        }
      ],
      "correctIndex": 3,
      "explanation": "A reflected path can carry the signal around the obstruction to the repeater. Changing polarization, using the long path or raising the standing wave ratio does not solve a blocked path.",
      "uid": "4oj7uem8yb5m"
    },
    {
      "id": "ht-l04-q-multipath-data",
      "shape": "mcq",
      "tags": [
        "propagation",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Signals reach a data receiver over several paths. What is likely for frequency modulated (FM) or other data transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The data rate must be raised"
        },
        {
          "modality": "text",
          "value": "Error rates are likely to increase",
          "short": "Error rates likely rise"
        },
        {
          "modality": "text",
          "value": "The data rate must be lowered"
        },
        {
          "modality": "text",
          "value": "FM signals are unaffected"
        }
      ],
      "correctIndex": 1,
      "explanation": "Multipath makes errors more likely on data links, FM included. No fixed raising or lowering of the data rate is required.",
      "uid": "1e9sq291skzl6v"
    },
    {
      "id": "ht-l04-q-crosspol-path",
      "shape": "mcq",
      "tags": [
        "antennas",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Two stations on a line-of-sight very high frequency (VHF) or ultra high frequency (UHF) path have cross-polarized antennas. What is the effect?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Received signal strength drops"
        },
        {
          "modality": "text",
          "value": "Sidebands become inverted"
        },
        {
          "modality": "text",
          "value": "Signals develop an echo"
        },
        {
          "modality": "text",
          "value": "Nothing significant changes"
        }
      ],
      "correctIndex": 0,
      "explanation": "Cross-polarization reduces received signal strength. It does not invert sidebands or add an echo, and the difference is significant.",
      "uid": "1kab6saovhphw"
    },
    {
      "id": "ht-l04-tf-fog-rain-little",
      "shape": "trueFalse",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Fog or rain has little effect on signals in the 10-meter and 6-meter bands.",
      "isTrue": true,
      "why": "Fog and rain have little effect on 10-meter and 6-meter signals: no significant absorption or deflection, and no added range.",
      "uid": "m1fjzw1n7r0ui"
    },
    {
      "id": "ht-l04-tf-vegetation-amplify",
      "shape": "trueFalse",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Vegetation amplifies ultra high frequency (UHF) and microwave signals, which improves reception of weak signals.",
      "isTrue": false,
      "why": "Vegetation absorbs these signals, which leads to poor reception of weak signals. It does not amplify them.",
      "uid": "g1dttpmz0kt3"
    },
    {
      "id": "ht-l04-c-ionospheric-polar",
      "shape": "cloze",
      "tags": [
        "antennas",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Signals propagated by the ionosphere are ___ polarized.",
      "answer": "elliptically",
      "distractors": [
        "vertically",
        "horizontally",
        "circularly"
      ],
      "explanation": "Ionospheric signals are elliptically polarized, so either vertical or horizontal antennas may be used.",
      "uid": "1cxxnxj1nwoqst"
    },
    {
      "id": "ht-l04-p-picket-fencing",
      "shape": "pair",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Picket fencing"
      },
      "sideB": {
        "modality": "text",
        "value": "Rapid flutter on mobile signals from multipath"
      },
      "uid": "18y3t3w4tvge4"
    },
    {
      "id": "ht-l04-f-fields-right-angles",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Fields at Right Angles",
      "body": "The electric and magnetic fields of a radio wave are **at right angles** to each other.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A 3D-style drawing of a wave moving left to right along a horizontal arrow marked as the direction of travel. A sine wave in a vertical plane is the electric field. A second sine wave in a horizontal plane is the magnetic field. Both share the same axis and are in step. A small right-angle mark where the two planes meet shows they are at 90 degrees. A short callout on the vertical electric-field wave says that polarization follows the electric field's orientation.",
        "imageSearchTerm": "Electric and Magnetic Fields at Right Angles",
        "alt": "Electric and Magnetic Fields at Right Angles: the two components of a radio wave, that they sit at right angles to each other, and that the electric field sets the polarization.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-fields-right-angles.f1cad07a.webp"
      },
      "uid": "1ha9bcx1nbfhpr"
    },
    {
      "id": "ht-l04-f-polarization-electric",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Defines Polarization",
      "body": "**Polarization** is defined by the orientation of the electric field.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, both in the same oblique view: a ground line runs into the picture in perspective, and each wave travels to the right. Left panel: a vertical antenna rod on a small base, with a wave leaving it to the right; along the wave, blue double-headed arrows stand straight up and down for the electric field. Right panel: a horizontal antenna rod lying along the depth direction of the perspective, at right angles to the direction of travel, with a wave leaving its middle to the right; along this wave, the blue double-headed arrows lie flat and level along the same depth direction as the rod. In both panels the field arrows stay at right angles to the direction of travel.",
        "imageSearchTerm": "Polarization Follows the Electric Field",
        "alt": "A vertical antenna's wave with an up-and-down electric field, vertical polarization, beside a horizontal antenna's wave with a side-to-side electric field, horizontal polarization.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-polarization-electric.0e12b84e.webp"
      },
      "uid": "13dfr1y1csjj92"
    },
    {
      "id": "ht-l04-f-two-components",
      "shape": "fact",
      "tags": [
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Two Parts of a Radio Wave",
      "body": "A radio wave has two components: **electric and magnetic fields**.",
      "uid": "1wm647i19ue950"
    },
    {
      "id": "ht-l04-f-speed-of-light",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Radio Waves Move at Light Speed",
      "body": "In free space, a radio wave travels at the **speed of light**.",
      "uid": "oualxr15igzp1"
    },
    {
      "id": "ht-l04-f-wavelength-shorter",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A frequency scale in megahertz, with three adjacent bands marked in order: HF, then VHF, then UHF. Each band shows its range. Beneath, a note gives the wavelength rule and two examples, with the higher frequency shown to have the shorter wavelength.",
        "imageSearchTerm": "HF, VHF and UHF Frequency Ranges",
        "alt": "The high frequency (HF), very high frequency (VHF) and ultra high frequency (UHF) ranges on a megahertz scale, with wavelength in meters as 300 divided by the frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-wavelength-shorter.f9c79c7e.webp"
      },
      "title": "Higher Frequency, Shorter Wavelength",
      "body": "The **wavelength** of a wave is related to its frequency. Wavelength gets shorter as frequency increases.",
      "uid": "1g9mvz81co7pnq"
    },
    {
      "id": "ht-l04-f-wavelength-formula",
      "shape": "fact",
      "tags": [
        "math",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Converting Frequency to Wavelength",
      "body": "To convert a frequency to an approximate wavelength, divide 300 by the frequency in megahertz (MHz). The result is the **wavelength** in meters. A signal at 30 MHz has a wavelength of about 10 meters, and one at 300 MHz about 1 meter.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The formula sits at the top in a box. Below it are two stacked horizontal sine waves drawn to the same scale. The upper wave is 30 MHz, with a dimension bracket over one full cycle marked about 10 meters. The lower wave is 300 MHz, drawn with one cycle one-tenth as long, with a bracket over one cycle marked about 1 meter. A side arrow pointing down from the upper wave to the lower one says that as frequency goes up, wavelength gets shorter.",
        "imageSearchTerm": "From Frequency to Wavelength",
        "alt": "From Frequency to Wavelength: the 300 divided by megahertz rule with two worked examples, and that wavelength shrinks as frequency rises.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-wavelength-formula.a3b0238e.webp"
      },
      "uid": "1e5behq16qi1ey"
    },
    {
      "id": "ht-l04-f-band-names-wavelength",
      "shape": "fact",
      "tags": [
        "bands",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Naming Bands by Wavelength",
      "body": "In addition to frequency, the approximate **wavelength** in meters identifies an amateur radio band. That is why a licensee speaks of the \"2-meter band\" or \"10 meters\".",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two rows on one shared length scale. Top row: a wave with one full cycle marked by a bracket labeled about 2 meters, and a name tag beside it reading the 2-meter band. Bottom row: a wave whose single cycle is five times as long as the top row's, marked by a bracket labeled about 10 meters, with a name tag reading 10 meters. A caption under both rows gives the rule.",
        "imageSearchTerm": "A Band Named for Its Wavelength",
        "alt": "A wave about 2 meters long beside the name 2-meter band, and one about 10 meters long beside 10 meters: a band's name gives its approximate wavelength.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-band-names-wavelength.315e87c6.webp"
      },
      "uid": "1d9wci39v010z"
    },
    {
      "id": "ht-l04-f-vhf-range",
      "shape": "fact",
      "tags": [
        "bands",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Very High Frequency Range",
      "body": "**Very high frequency (VHF)** covers 30 megahertz (MHz) to 300 MHz. All three ranges, high frequency (HF), VHF and ultra high frequency (UHF), are measured in megahertz.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal scale of three equal segments in a row. The middle segment is filled with the blue tint, outlined in blue and labeled Very high frequency (VHF), with its ends marked 30 MHz and 300 MHz. The left and right segments are plain light gray and carry only their names, High frequency (HF) and Ultra high frequency (UHF). A wide bracket under all three segments carries the unit label.",
        "imageSearchTerm": "Very High Frequency: 30 to 300 Megahertz",
        "alt": "Very high frequency (VHF), 30 to 300 megahertz (MHz), highlighted between the high and ultra high frequency ranges, all three measured in megahertz.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-vhf-range.697e6f3a.webp"
      },
      "uid": "4ffbo92ukyzx"
    },
    {
      "id": "ht-l04-f-uhf-range",
      "shape": "fact",
      "tags": [
        "bands",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Ultra High Frequency Range",
      "body": "**Ultra high frequency (UHF)** covers 300 to 3000 megahertz (MHz). As frequency rises from high frequency (HF) through very high frequency (VHF) to UHF, wavelength shortens.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal scale of three equal segments in a row. The right segment is filled with the green tint, outlined in green and labeled Ultra high frequency (UHF), with its ends marked 300 megahertz (MHz) and 3000 MHz. The left and middle segments are plain light gray and carry only their names, High frequency (HF) and Very high frequency (VHF). Under each segment sits a short sample of wave: a long, stretched wave under HF, a medium wave under VHF and a short, tightly packed wave under UHF. An arrow along the bottom points right with the caption.",
        "imageSearchTerm": "Ultra High Frequency: 300 to 3000 Megahertz",
        "alt": "Ultra high frequency (UHF), 300 to 3000 megahertz (MHz), highlighted as the top of three ranges, with wave samples that get shorter as frequency rises.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-uhf-range.a5ba8d49.webp"
      },
      "uid": "1ttfws4a08w26"
    },
    {
      "id": "ht-l04-f-hf-range",
      "shape": "fact",
      "tags": [
        "bands",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The High Frequency Range",
      "body": "**High frequency (HF)** covers 3 to 30 megahertz (MHz). Each of the three ranges, HF, very high frequency (VHF) and ultra high frequency (UHF), runs from one figure to ten times that figure.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal scale of three equal segments in a row. The left segment is filled gold and labeled High frequency (HF), with its ends marked 3 megahertz (MHz) and 30 MHz, and a curved arrow over it marked x 10 from its lower end to its upper end. The middle and right segments are plain light gray and carry only their names, Very high frequency (VHF) and Ultra high frequency (UHF), with no values. A caption beneath gives the rule for all three.",
        "imageSearchTerm": "High Frequency: 3 to 30 Megahertz",
        "alt": "High frequency (HF), 3 to 30 megahertz (MHz), highlighted as the first of three ranges, each running from one figure to ten times that figure.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-hf-range.73e64968.webp"
      },
      "uid": "1syhf7912d2365"
    },
    {
      "id": "ht-l04-f-velocity-meters",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Free-Space Speed in Meters",
      "body": "The speed of light, and so of a radio wave in free space, is approximately **300,000,000 meters per second**.",
      "uid": "vyejov1vi86vt"
    },
    {
      "id": "ht-l04-f-same-velocity",
      "shape": "fact",
      "tags": [
        "radio-waves",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Every Frequency, Same Speed",
      "body": "Every radio frequency travels at the **same velocity** in free space.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Three horizontal lanes, one above the other, between a start line on the left and a finish line on the right. Each lane holds one wave train: a long, stretched wave on top, a medium wave in the middle and a short, tightly packed wave at the bottom. All three wave fronts touch the finish line at the same moment, lined up vertically. Each lane carries its name at the left.",
        "imageSearchTerm": "Every Frequency Travels at the Same Speed",
        "alt": "High frequency (HF), very high frequency (VHF) and microwave waves leave a start line together and reach the finish at the same moment: the same velocity in free space.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-same-velocity.adc92fe0.webp"
      },
      "uid": "1vkvqybsywp27"
    },
    {
      "id": "ht-l04-q-wavelength-150",
      "shape": "mcq",
      "tags": [
        "math",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "What is the approximate wavelength of a 150 megahertz (MHz) signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "2 meters"
        },
        {
          "modality": "text",
          "value": "0.5 meters"
        },
        {
          "modality": "text",
          "value": "4 meters"
        },
        {
          "modality": "text",
          "value": "6 meters"
        }
      ],
      "correctIndex": 0,
      "explanation": "Dividing 300 by 150 gives 2 meters. The 0.5-meter figure comes from dividing the frequency by 300, which is the wrong way round.",
      "uid": "74kpkn11kh7mv"
    },
    {
      "id": "ht-l04-q-range-450",
      "shape": "mcq",
      "tags": [
        "bands",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A transmission at 450 megahertz (MHz) falls in which frequency range?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Super high frequency (SHF)"
        },
        {
          "modality": "text",
          "value": "Very high frequency (VHF)"
        },
        {
          "modality": "text",
          "value": "Ultra high frequency (UHF)"
        },
        {
          "modality": "text",
          "value": "High frequency (HF)"
        }
      ],
      "correctIndex": 2,
      "explanation": "UHF runs from 300 to 3000 MHz, so 450 MHz is UHF. VHF stops at 300 MHz and HF stops at 30 MHz.",
      "uid": "1xe3kqbr23znb"
    },
    {
      "id": "ht-l04-q-match-polarization",
      "shape": "mcq",
      "tags": [
        "antennas",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants to know what sets a radio wave's polarization. Which property is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Orientation of the magnetic field",
          "short": "Magnetic field orientation"
        },
        {
          "modality": "text",
          "value": "Ratio of velocity to wavelength",
          "short": "Velocity-to-wavelength ratio"
        },
        {
          "modality": "text",
          "value": "Strength of the signal"
        },
        {
          "modality": "text",
          "value": "Orientation of the electric field",
          "short": "Electric field orientation"
        }
      ],
      "correctIndex": 3,
      "explanation": "Polarization is defined by the orientation of the electric field. The magnetic field's orientation, a velocity-to-wavelength ratio or signal strength do not define it.",
      "uid": "1895nk61mkmaw0"
    },
    {
      "id": "ht-l04-q-faster-microwaves",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A friend says microwaves outrun very high frequency (VHF) and ultra high frequency (UHF) signals in free space. Which statement is correct?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Microwaves are faster than UHF signals",
          "short": "Microwaves are faster than UHF"
        },
        {
          "modality": "text",
          "value": "All radio frequencies travel equally fast",
          "short": "All frequencies equally fast"
        },
        {
          "modality": "text",
          "value": "UHF signals are faster than VHF signals",
          "short": "UHF is faster than VHF"
        },
        {
          "modality": "text",
          "value": "VHF signals are faster than microwaves",
          "short": "VHF is faster than microwaves"
        }
      ],
      "correctIndex": 1,
      "explanation": "In free space every radio frequency travels at the same velocity, so none of the three is faster than another.",
      "uid": "1h7gt5x1t4u4ax"
    },
    {
      "id": "ht-l04-tf-fields-perpendicular",
      "shape": "trueFalse",
      "tags": [
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The electric and magnetic fields of a radio wave are at right angles to each other.",
      "isTrue": true,
      "why": "The two fields of an electromagnetic wave are at right angles. They are not parallel and do not travel at different speeds.",
      "uid": "1iqz2bj3f8v55"
    },
    {
      "id": "ht-l04-tf-divide-by-300",
      "shape": "trueFalse",
      "tags": [
        "math",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Dividing a frequency in megahertz (MHz) by 300 gives the approximate wavelength in meters.",
      "isTrue": false,
      "why": "The division runs the other way: 300 divided by the frequency in MHz gives the wavelength in meters.",
      "uid": "bgkx9n1aaak1l"
    },
    {
      "id": "ht-l04-c-formula-constant",
      "shape": "cloze",
      "tags": [
        "math",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "To find wavelength in meters, divide ___ by the frequency in megahertz (MHz).",
      "answer": "300",
      "distractors": [
        "30",
        "3000",
        "150"
      ],
      "explanation": "The constant is 300, so a 30 MHz signal has a wavelength of about 10 meters.",
      "uid": "xb8k2zngdoq7"
    },
    {
      "id": "ht-l04-p-hf-range",
      "shape": "pair",
      "tags": [
        "bands",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "HF (high frequency)"
      },
      "sideB": {
        "modality": "text",
        "value": "3 to 30 megahertz (MHz)"
      },
      "uid": "1awxr15m23l6d"
    },
    {
      "id": "ht-l04-f-radio-horizon-uhf",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A section of the curved Earth's surface with a transmitting antenna on top. A straight sight line from the antenna marks the visual horizon. A slightly curved line from the same antenna marks the radio wave, bent by the atmosphere, and it reaches farther than the visual horizon. Each horizon is marked where its line meets the ground.",
        "imageSearchTerm": "Why the Radio Horizon Is Farther",
        "alt": "Why the radio horizon is farther: the atmosphere refracts radio waves slightly, so the radio horizon lies beyond the visual horizon.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-radio-horizon-uhf.2c611489.webp"
      },
      "title": "Why UHF Stays Near the Horizon",
      "body": "Ultra high frequency (UHF) signals are usually not propagated by the ionosphere, so simplex UHF signals are rarely heard beyond their **radio horizon**.",
      "uid": "1jl1vlx34pk6t"
    },
    {
      "id": "ht-l04-f-hf-long-distance",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "HF Carries Farthest",
      "body": "Long-distance ionospheric propagation is far more common on high frequency (HF) than on very high frequency (VHF) and higher frequencies.",
      "uid": "1y73xddox5eyd"
    },
    {
      "id": "ht-l04-f-auroral-raspy",
      "shape": "fact",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Sound of Auroral Backscatter",
      "body": "In **auroral backscatter**, very high frequency (VHF) signals are distorted, with a characteristic raspy sound.",
      "uid": "uzgdryxf7mzk"
    },
    {
      "id": "ht-l04-f-sporadic-e",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Sporadic E Surprises",
      "body": "**Sporadic E** is the type of propagation most commonly associated with occasional strong signals on the 10-, 6- and 2-meter bands from beyond the radio horizon.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A wide curved Earth surface along the bottom. A receiving station stands on the right. A dashed line from it, tangent to the Earth's curve, marks its radio horizon; a transmitting station on the far left sits beyond that line, hidden by the curve. High above the middle, a small, isolated patch shaped like a soft cloud is labeled Sporadic E. A strong signal arrow rises from the far-left station, reflects off the patch and comes down to the right-hand station. A tag near the arrow names the bands, and a caption says the signals are occasional and strong.",
        "imageSearchTerm": "Sporadic E Beyond the Radio Horizon",
        "alt": "A signal from a station hidden beyond the radio horizon reflects off a patch of sporadic E: occasional strong signals on the 10-, 6- and 2-meter bands.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-sporadic-e.759cdd77.webp"
      },
      "uid": "pbutonbkg34p"
    },
    {
      "id": "ht-l04-f-knife-edge",
      "shape": "fact",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Knife-Edge Diffraction Past Obstructions",
      "body": "**Knife-edge diffraction** may allow radio signals to travel beyond obstructions between the transmitting and receiving stations.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view. A transmitting antenna is at the left and a receiving antenna at the right. Between them stands a tall obstruction with a sharp top edge, such as a ridge. The direct straight line between the antennas is drawn dashed and stops at the obstruction. A solid signal path runs from the transmitter to the sharp top edge, then bends downward around the edge and fans out to reach the receiving antenna in the shadow behind it.",
        "imageSearchTerm": "Knife-Edge Diffraction Past an Obstruction",
        "alt": "Knife-Edge Diffraction Past an Obstruction: a signal bending over a sharp edge to reach a station hidden behind an obstruction.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-knife-edge.7714670d.webp"
      },
      "uid": "2aq6t1hnp647"
    },
    {
      "id": "ht-l04-f-tropo-ducting",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Tropospheric Ducting Range",
      "body": "**Tropospheric ducting** is responsible for over-the-horizon very high frequency (VHF) and ultra high frequency (UHF) communications to ranges of approximately 300 miles on a regular basis.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view of a curved Earth with a transmitting antenna at the left and a receiving antenna at the right, beyond the horizon. A thin horizontal layer just above the ground, well below any ionosphere, is marked as the temperature inversion. The signal path zigzags gently. It bends down under the inversion layer, comes near the ground, and bends up again, staying inside the gap between ground and layer until it reaches the far antenna. A long bracket along the ground between the antennas is marked about 300 miles.",
        "imageSearchTerm": "Tropospheric Ducting Over the Horizon",
        "alt": "Tropospheric Ducting Over the Horizon: a temperature inversion forming a duct that carries very high frequency (VHF) and ultra high frequency (UHF) signals over the horizon to about 300 miles.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-tropo-ducting.d6818462.webp"
      },
      "uid": "spn5xpr85r3b"
    },
    {
      "id": "ht-l04-f-meteor-scatter-6m",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Best Band for Meteor Scatter",
      "body": "**Meteor scatter** is best suited to the 6-meter band.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A light blue-tinted sky above a curved Earth. High up, a bright meteor streaks diagonally, leaving a glowing trail. Two stations stand far apart on the ground. A signal arrow rises from the left station to the trail, and a second arrow comes down from the trail to the right station. A band tag at the bottom names 6 meters as the best band.",
        "imageSearchTerm": "Meteor Scatter Works Best on 6 Meters",
        "alt": "A signal from one station scatters off a meteor's glowing trail down to a distant station, with 6 meters named as the best band for meteor scatter.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-meteor-scatter-6m.97e3b7dd.webp"
      },
      "uid": "1ki5dtv1x4cemv"
    },
    {
      "id": "ht-l04-f-temperature-inversion",
      "shape": "fact",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Causes Ducting",
      "body": "Tropospheric ducting is caused by **temperature inversions** in the atmosphere.",
      "uid": "s57seikywyku"
    },
    {
      "id": "ht-l04-f-10m-f-region-timing",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Best Time for 10 Meters",
      "body": "The best time for long-distance 10-meter band propagation via the **F region** of the ionosphere is from dawn to shortly after sunset during periods of high sunspot activity.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal day strip running left to right from night, through dawn, daytime, sunset, and back into night. A highlighted bar starts at the dawn mark and ends a short way past the sunset mark. A note above the strip states the high-sunspot condition. The night portions are left plain.",
        "imageSearchTerm": "When 10 Meters Opens via the F Region",
        "alt": "When 10 Meters Opens via the F Region: the daily window for long-distance 10-meter F-region propagation, from dawn to shortly after sunset, in periods of high sunspot activity.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-10m-f-region-timing.ccca85c9.webp"
      },
      "uid": "rui50k61owi6"
    },
    {
      "id": "ht-l04-f-f-region-6-10",
      "shape": "fact",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Bands That Use the F Region",
      "body": "At the peak of the sunspot cycle, the 6-meter and 10-meter bands may provide long-distance communications via the **F region**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Upper left: a small chart of the sunspot cycle as one smooth rise and fall, with a gold dot at the top marked Peak. Main picture: a curved Earth with a wide arched band high above it for the F region. Two signal paths, one blue and one green, rise from a station at the left, bend back from the F region and come down at a distant station on the right. The blue path is tagged 6 meters and the green path 10 meters. A caption says long-distance contacts may open.",
        "imageSearchTerm": "6 and 10 Meters at the Sunspot Peak",
        "alt": "At the peak of the sunspot cycle, 6-meter and 10-meter signals bend back from the F region to a distant station: long-distance contacts may open.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l04-f-f-region-6-10.2ef42220.webp"
      },
      "uid": "183x3fpg6az1h"
    },
    {
      "id": "ht-l04-f-radio-horizon-refraction",
      "shape": "fact",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why the Radio Horizon Is Farther",
      "body": "The **radio horizon** for very high frequency (VHF) and ultra high frequency (UHF) signals is more distant than the visual horizon. The reason is that the atmosphere refracts radio waves slightly.",
      "uid": "1ak57on1nltz7v"
    },
    {
      "id": "ht-l04-d-bandwidth",
      "shape": "definition",
      "tags": [
        "radio-waves",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Bandwidth"
      },
      "definition": {
        "modality": "text",
        "value": "Span of frequencies outside which a transmitted signal's mean power is attenuated at least 26 dB below its mean power inside that span",
        "short": "Span outside which power is ≥26 dB down"
      },
      "uid": "1bstt031py7fh5"
    },
    {
      "id": "ht-l04-q-f-region-timing",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In a year of high sunspot activity, a licensee wants long-distance 10-meter contacts via the F region. When is generally best?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Shortly after sunset to dawn",
          "short": "Just after sunset to dawn"
        },
        {
          "modality": "text",
          "value": "Dawn to shortly after sunset",
          "short": "Dawn to just after sunset"
        },
        {
          "modality": "text",
          "value": "Around local midnight"
        },
        {
          "modality": "text",
          "value": "The hour before dawn"
        }
      ],
      "correctIndex": 1,
      "explanation": "The F region carries 10-meter signals best from dawn to shortly after sunset when sunspot activity is high. Night is not the best time.",
      "uid": "tbt96p7fg0xx"
    },
    {
      "id": "ht-l04-q-auroral-statement",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which statement describes very high frequency (VHF) signals received by auroral backscatter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They occur only on winter nights",
          "short": "Only on winter nights"
        },
        {
          "modality": "text",
          "value": "They are strongest aimed west",
          "short": "Strongest aimed west"
        },
        {
          "modality": "text",
          "value": "They come from 10,000 miles or more",
          "short": "From 10,000 miles or more"
        },
        {
          "modality": "text",
          "value": "They sound distorted and raspy",
          "short": "Distorted and raspy"
        }
      ],
      "correctIndex": 3,
      "explanation": "Auroral backscatter signals are distorted with a characteristic raspy sound. They are not usually received from 10,000 miles or more, and they are not limited to winter nights or strongest aimed west.",
      "uid": "1r6d4881pq8yrq"
    },
    {
      "id": "ht-l04-q-ducting-cause",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Regular over-the-horizon contacts of about 300 miles occur by tropospheric ducting. What atmospheric condition causes it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Temperature inversions in the air",
          "short": "Temperature inversions"
        },
        {
          "modality": "text",
          "value": "Lightning discharges during storms",
          "short": "Lightning discharges"
        },
        {
          "modality": "text",
          "value": "Solar flares and sunspot activity",
          "short": "Solar flares and sunspots"
        },
        {
          "modality": "text",
          "value": "Hurricane and tornado updrafts"
        }
      ],
      "correctIndex": 0,
      "explanation": "Temperature inversions create the ducting. Lightning, sunspots and solar flares, and updrafts from hurricanes and tornadoes do not cause it.",
      "uid": "1o5glxf1r7tef3"
    },
    {
      "id": "ht-l04-q-ridge-blocks",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A signal reaches a receiver even though a ridge blocks the straight path. Which effect may allow this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Faraday rotation effect"
        },
        {
          "modality": "text",
          "value": "Doppler frequency shift"
        },
        {
          "modality": "text",
          "value": "Knife-edge diffraction"
        },
        {
          "modality": "text",
          "value": "Quantum tunneling effect"
        }
      ],
      "correctIndex": 2,
      "explanation": "Knife-edge diffraction can carry a signal past an obstruction. Faraday rotation, Doppler shift and quantum tunneling do not.",
      "uid": "1ig10wp19s5b3b"
    },
    {
      "id": "ht-l04-tf-sporadic-e-bands",
      "shape": "trueFalse",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Sporadic E is most commonly associated with occasional strong signals on the 10-, 6- and 2-meter bands from beyond the radio horizon.",
      "isTrue": true,
      "why": "Sporadic E is the type of propagation linked to these occasional strong over-the-horizon signals. Backscatter, D region absorption and gray-line propagation are not.",
      "uid": "1okb8s11g3j6vb"
    },
    {
      "id": "ht-l04-tf-meteor-two-meter",
      "shape": "trueFalse",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Meteor scatter is best suited to the 2-meter band.",
      "isTrue": false,
      "why": "Meteor scatter is best suited to the 6-meter band. The 2-meter band is not the best.",
      "uid": "hnmfzw1b0e4tq"
    },
    {
      "id": "ht-l04-c-f-region-partner",
      "shape": "cloze",
      "tags": [
        "propagation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "At the peak of the sunspot cycle, long-distance F region communications may be possible on the 10-meter and ___ bands.",
      "answer": "6-meter",
      "distractors": [
        "23-centimeter",
        "70-centimeter",
        "1.25-meter"
      ],
      "explanation": "At the sunspot peak the 6-meter and 10-meter bands may use the F region. The 23-centimeter, 70-centimeter and 1.25-meter bands do not.",
      "uid": "8g4lcu1f9fhfg"
    },
    {
      "id": "ht-l04-p-radio-horizon",
      "shape": "pair",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Radio horizon"
      },
      "sideB": {
        "modality": "text",
        "value": "Farther than the visual horizon"
      },
      "uid": "1i570x11kjgyqx"
    },
    {
      "id": "ht-l04-tf-ionospheric-fading-cause",
      "shape": "trueFalse",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Irregular fading of ionospheric signals is likely caused by random combining of signals arriving via different paths.",
      "isTrue": true,
      "why": "Random combining of signals from different paths is a likely cause of irregular ionospheric fading. Thunderstorm interference and intermodulation distortion are not.",
      "uid": "16icgrnm01jl9"
    },
    {
      "id": "ot-ht-l04-t3a01",
      "shape": "mcq",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why do VHF signal strengths sometimes vary greatly when the antenna is moved only a few feet?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The signal path encounters different concentrations of water vapor"
        },
        {
          "modality": "text",
          "value": "VHF ionospheric propagation is very sensitive to path length"
        },
        {
          "modality": "text",
          "value": "Multipath propagation cancels or reinforces signals"
        },
        {
          "modality": "text",
          "value": "The Doppler effect causes slight frequency shifts that change signal strength"
        }
      ],
      "correctIndex": 2,
      "explanation": "Signals arriving by several paths combine at the antenna and cancel or reinforce each other, so moving a few feet changes strength. VHF stands for very high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "tctgtv234eaj"
    },
    {
      "id": "ot-ht-l04-t3a05",
      "shape": "mcq",
      "tags": [
        "propagation",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "When using a directional antenna, how might your station be able to communicate with a distant repeater if buildings or obstructions are blocking the direct line of sight path?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Change from vertical to horizontal polarization"
        },
        {
          "modality": "text",
          "value": "Try to find a path that reflects signals to the repeater"
        },
        {
          "modality": "text",
          "value": "Try the long path"
        },
        {
          "modality": "text",
          "value": "Increase the antenna SWR"
        }
      ],
      "correctIndex": 1,
      "explanation": "When buildings block the direct path, the station can try to find a path that reflects signals to the repeater. SWR stands for standing wave ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9h41fg1p0pgbe"
    },
    {
      "id": "ot-ht-l04-t3a06",
      "shape": "mcq",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the meaning of the term “picket fencing”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Alternating transmissions during a net operation"
        },
        {
          "modality": "text",
          "value": "Rapid flutter on mobile signals due to multipath propagation"
        },
        {
          "modality": "text",
          "value": "A type of ground system used with vertical antennas"
        },
        {
          "modality": "text",
          "value": "Interference from cable TV in the form of carriers at fixed intervals across the band"
        }
      ],
      "correctIndex": 1,
      "explanation": "Picket fencing is the rapid flutter on mobile signals caused by multipath propagation.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "c5ae92f0od06"
    },
    {
      "id": "ot-ht-l04-t3a02",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "How does vegetation affect UHF and microwave signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Causes knife-edge diffraction, distorting voice peaks"
        },
        {
          "modality": "text",
          "value": "Absorbs signals, leading to poor reception of weak signals"
        },
        {
          "modality": "text",
          "value": "Amplifies signals, improving reception of weak signals"
        },
        {
          "modality": "text",
          "value": "Has no effect"
        }
      ],
      "correctIndex": 1,
      "explanation": "Vegetation absorbs ultra high frequency (UHF) and microwave signals, so weak signals are received poorly. It does not amplify them.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "20kgl315dvmzv"
    },
    {
      "id": "ot-ht-l04-t3a07",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What weather condition might decrease range at microwave frequencies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "High winds"
        },
        {
          "modality": "text",
          "value": "Low barometric pressure"
        },
        {
          "modality": "text",
          "value": "Precipitation"
        },
        {
          "modality": "text",
          "value": "Colder temperatures"
        }
      ],
      "correctIndex": 2,
      "explanation": "Precipitation might decrease range at microwave frequencies. Wind, low pressure and cold are not the conditions that do this.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1vs07d1u5n5lb"
    },
    {
      "id": "ot-ht-l04-t3a12",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What effect does fog or rain have on 10-meter and 6-meter band signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Absorption"
        },
        {
          "modality": "text",
          "value": "Little effect"
        },
        {
          "modality": "text",
          "value": "Deflection"
        },
        {
          "modality": "text",
          "value": "Increased range"
        }
      ],
      "correctIndex": 1,
      "explanation": "Fog or rain has little effect on 10-meter and 6-meter signals: no significant absorption or deflection, and no added range.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19a866o16u8yto"
    },
    {
      "id": "ot-ht-l04-t3a03",
      "shape": "mcq",
      "tags": [
        "antennas",
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What antenna polarization is normally used for long-distance CW and SSB contacts on the VHF and UHF bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Right-hand circular"
        },
        {
          "modality": "text",
          "value": "Left-hand circular"
        },
        {
          "modality": "text",
          "value": "Horizontal"
        },
        {
          "modality": "text",
          "value": "Vertical"
        }
      ],
      "correctIndex": 2,
      "explanation": "Horizontal polarization is normally used for long-distance continuous wave (CW) and single sideband (SSB) contacts on very high frequency (VHF) and ultra high frequency (UHF).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "529ggp560m4l"
    },
    {
      "id": "ot-ht-l04-t3a04",
      "shape": "mcq",
      "tags": [
        "antennas",
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the effect of antenna cross-polarization over a line-of-sight VHF or UHF path?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Modulation sidebands might become inverted"
        },
        {
          "modality": "text",
          "value": "Received signal strength is reduced"
        },
        {
          "modality": "text",
          "value": "Signals have an echo effect"
        },
        {
          "modality": "text",
          "value": "Nothing significant will happen"
        }
      ],
      "correctIndex": 1,
      "explanation": "Cross-polarized antennas over a line-of-sight path reduce received signal strength. They do not invert sidebands or cause an echo. VHF stands for very high frequency and UHF stands for ultra high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1z0ekuz1ubbi4n"
    },
    {
      "id": "ot-ht-l04-t3a09",
      "shape": "mcq",
      "tags": [
        "antennas",
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following results from the fact that signals propagated by the ionosphere are elliptically polarized?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Digital modes are unusable"
        },
        {
          "modality": "text",
          "value": "Either vertical or horizontal antennas may be used to transmit or receive"
        },
        {
          "modality": "text",
          "value": "FM voice is unusable"
        },
        {
          "modality": "text",
          "value": "Both the transmitting and receiving antennas must be of the same polarization"
        }
      ],
      "correctIndex": 1,
      "explanation": "Ionospheric signals are elliptically polarized, so either vertical or horizontal antennas may be used. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1b3odae2343n4"
    },
    {
      "id": "ot-ht-l04-t3a08",
      "shape": "mcq",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a likely cause of irregular fading of signals propagated by the ionosphere?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Frequency shift due to Faraday rotation"
        },
        {
          "modality": "text",
          "value": "Interference from thunderstorms"
        },
        {
          "modality": "text",
          "value": "Intermodulation distortion"
        },
        {
          "modality": "text",
          "value": "Random combining of signals arriving via different paths"
        }
      ],
      "correctIndex": 3,
      "explanation": "Irregular fading of ionospheric signals is likely caused by random combining of signals arriving via different paths.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1yw5mx4vn15ls"
    },
    {
      "id": "ot-ht-l04-t3a10",
      "shape": "mcq",
      "tags": [
        "propagation",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What effect does multi-path propagation have on data transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transmission rates must be increased by a factor equal to the number of paths observed"
        },
        {
          "modality": "text",
          "value": "Transmission rates must be decreased by a factor equal to the number of paths observed"
        },
        {
          "modality": "text",
          "value": "No significant changes will occur if the signals are transmitted using FM"
        },
        {
          "modality": "text",
          "value": "Error rates are likely to increase"
        }
      ],
      "correctIndex": 3,
      "explanation": "Multipath makes error rates likely to increase on data transmissions. No fixed rate change is required, and frequency modulated (FM) operation does not cure it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1iiah25ifg40n"
    },
    {
      "id": "ot-ht-l04-t3a11",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which region of the atmosphere can reflect HF radio waves?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The stratosphere"
        },
        {
          "modality": "text",
          "value": "The troposphere"
        },
        {
          "modality": "text",
          "value": "The ionosphere"
        },
        {
          "modality": "text",
          "value": "The electrosphere"
        }
      ],
      "correctIndex": 2,
      "explanation": "The ionosphere is the atmospheric region that can reflect high frequency (HF) radio waves. The stratosphere and troposphere are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "djb14y1gvy8dw"
    },
    {
      "id": "ot-ht-l04-t3b01",
      "shape": "mcq",
      "tags": [
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the relationship between the electric and magnetic fields of an electromagnetic wave?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They travel at different speeds"
        },
        {
          "modality": "text",
          "value": "They are in parallel"
        },
        {
          "modality": "text",
          "value": "They revolve in opposite directions"
        },
        {
          "modality": "text",
          "value": "They are at right angles"
        }
      ],
      "correctIndex": 3,
      "explanation": "The electric and magnetic fields of a radio wave are at right angles to each other.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "wv0zji1vocyvm"
    },
    {
      "id": "ot-ht-l04-t3b02",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What property of a radio wave defines its polarization?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The orientation of the electric field"
        },
        {
          "modality": "text",
          "value": "The orientation of the magnetic field"
        },
        {
          "modality": "text",
          "value": "The ratio of the energy in the magnetic field to the energy in the electric field"
        },
        {
          "modality": "text",
          "value": "The ratio of the velocity to the wavelength"
        }
      ],
      "correctIndex": 0,
      "explanation": "Polarization is defined by the orientation of the electric field, not the magnetic field or any ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "118t82qanlghe"
    },
    {
      "id": "ot-ht-l04-t3b03",
      "shape": "mcq",
      "tags": [
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "What are the two components of a radio wave?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Impedance and reactance"
        },
        {
          "modality": "text",
          "value": "Voltage and current"
        },
        {
          "modality": "text",
          "value": "Electric and magnetic fields"
        },
        {
          "modality": "text",
          "value": "Ionizing and non-ionizing radiation"
        }
      ],
      "correctIndex": 2,
      "explanation": "A radio wave has two components: electric and magnetic fields.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lf1pzujgac76"
    },
    {
      "id": "ot-ht-l04-t3b04",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the velocity of a radio wave traveling through free space?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Speed of light"
        },
        {
          "modality": "text",
          "value": "Speed of sound"
        },
        {
          "modality": "text",
          "value": "0.86 times the speed of light"
        },
        {
          "modality": "text",
          "value": "1.86 times the speed of sound"
        }
      ],
      "correctIndex": 0,
      "explanation": "In free space a radio wave travels at the speed of light, not the speed of sound.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "kr01m71t1u7rl"
    },
    {
      "id": "ot-ht-l04-t3b11",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the approximate velocity of a radio wave in free space?"
      },
      "options": [
        {
          "modality": "text",
          "value": "150,000,000 meters per second"
        },
        {
          "modality": "text",
          "value": "300,000,000 meters per second"
        },
        {
          "modality": "text",
          "value": "300,000,000 miles per hour"
        },
        {
          "modality": "text",
          "value": "150,000,000 miles per hour"
        }
      ],
      "correctIndex": 1,
      "explanation": "The speed of light is approximately 300,000,000 meters per second. The 150,000,000 figure and miles per hour figures are wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "113hgm9sa74qt"
    },
    {
      "id": "ot-ht-l04-t3b12",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of these frequencies travels at the highest velocity in free space?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Microwaves"
        },
        {
          "modality": "text",
          "value": "UHF"
        },
        {
          "modality": "text",
          "value": "VHF"
        },
        {
          "modality": "text",
          "value": "All radio frequencies travel at the same velocity"
        }
      ],
      "correctIndex": 3,
      "explanation": "Every radio frequency travels at the same velocity in free space, so none is faster than another. UHF stands for ultra high frequency and VHF stands for very high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "103ezp816t6tqa"
    },
    {
      "id": "ot-ht-l04-t3b05",
      "shape": "mcq",
      "tags": [
        "radio-waves",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the relationship between wavelength and frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Wavelength gets longer as frequency increases"
        },
        {
          "modality": "text",
          "value": "Wavelength gets shorter as frequency increases"
        },
        {
          "modality": "text",
          "value": "Wavelength is constant at all frequencies"
        },
        {
          "modality": "text",
          "value": "Wavelength and frequency increase as path length increases"
        }
      ],
      "correctIndex": 1,
      "explanation": "Wavelength gets shorter as frequency increases.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1rwjy5g1p6z69e"
    },
    {
      "id": "ot-ht-l04-t3b06",
      "shape": "mcq",
      "tags": [
        "math",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the formula for converting frequency to approximate wavelength in meters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Wavelength in meters equals frequency in hertz multiplied by 300"
        },
        {
          "modality": "text",
          "value": "Wavelength in meters equals frequency in hertz divided by 300"
        },
        {
          "modality": "text",
          "value": "Wavelength in meters equals frequency in megahertz divided by 300"
        },
        {
          "modality": "text",
          "value": "Wavelength in meters equals 300 divided by frequency in megahertz"
        }
      ],
      "correctIndex": 3,
      "explanation": "Wavelength in meters equals 300 divided by the frequency in megahertz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13pqmf81y7cgxy"
    },
    {
      "id": "ot-ht-l04-t3b07",
      "shape": "mcq",
      "tags": [
        "bands",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "In addition to frequency, which of the following is used to identify amateur radio bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The approximate wavelength in meters"
        },
        {
          "modality": "text",
          "value": "Traditional letter/number designators"
        },
        {
          "modality": "text",
          "value": "Channel numbers"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "Besides frequency, the approximate wavelength in meters identifies a band, as in the 2-meter band.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1rrfrbt14ym0y3"
    },
    {
      "id": "ot-ht-l04-t3b08",
      "shape": "mcq",
      "tags": [
        "bands",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What frequency range is referred to as VHF?"
      },
      "options": [
        {
          "modality": "text",
          "value": "30 kHz to 300 kHz"
        },
        {
          "modality": "text",
          "value": "30 MHz to 300 MHz"
        },
        {
          "modality": "text",
          "value": "300 kHz to 3000 kHz"
        },
        {
          "modality": "text",
          "value": "300 MHz to 3000 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "Very high frequency (VHF) runs from 30 MHz to 300 MHz. Kilohertz ranges are wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1n9j4m1tqbuet"
    },
    {
      "id": "ot-ht-l04-t3b09",
      "shape": "mcq",
      "tags": [
        "bands",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What frequency range is referred to as UHF?"
      },
      "options": [
        {
          "modality": "text",
          "value": "30 to 300 kHz"
        },
        {
          "modality": "text",
          "value": "30 to 300 MHz"
        },
        {
          "modality": "text",
          "value": "300 to 3000 kHz"
        },
        {
          "modality": "text",
          "value": "300 to 3000 MHz"
        }
      ],
      "correctIndex": 3,
      "explanation": "Ultra high frequency (UHF) runs from 300 to 3000 MHz. A range in kilohertz is not UHF.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ukm5psix4kt4"
    },
    {
      "id": "ot-ht-l04-t3b10",
      "shape": "mcq",
      "tags": [
        "bands",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What frequency range is referred to as HF?"
      },
      "options": [
        {
          "modality": "text",
          "value": "300 to 3000 MHz"
        },
        {
          "modality": "text",
          "value": "30 to 300 MHz"
        },
        {
          "modality": "text",
          "value": "3 to 30 MHz"
        },
        {
          "modality": "text",
          "value": "300 to 3000 kHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "High frequency (HF) runs from 3 to 30 MHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1el04cepiycbs"
    },
    {
      "id": "ot-ht-l04-t3c01",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why are simplex UHF signals rarely heard beyond their radio horizon?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They are too weak to go very far"
        },
        {
          "modality": "text",
          "value": "FCC regulations prohibit them from going more than 50 miles"
        },
        {
          "modality": "text",
          "value": "UHF signals are usually not propagated by the ionosphere"
        },
        {
          "modality": "text",
          "value": "UHF signals are absorbed by the ionospheric D region"
        }
      ],
      "correctIndex": 2,
      "explanation": "Simplex ultra high frequency (UHF) signals are rarely heard beyond the radio horizon because UHF signals are usually not propagated by the ionosphere. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "kvabpk1q62tnc"
    },
    {
      "id": "ot-ht-l04-t3c11",
      "shape": "mcq",
      "tags": [
        "propagation",
        "radio-waves"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why is the radio horizon for VHF and UHF signals more distant than the visual horizon?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Radio signals move somewhat faster than the speed of light"
        },
        {
          "modality": "text",
          "value": "Radio waves are not blocked by dust particles"
        },
        {
          "modality": "text",
          "value": "The atmosphere refracts radio waves slightly"
        },
        {
          "modality": "text",
          "value": "Radio waves are blocked by dust particles"
        }
      ],
      "correctIndex": 2,
      "explanation": "The radio horizon is farther than the visual horizon because the atmosphere refracts radio waves slightly. VHF stands for very high frequency and UHF stands for ultra high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1w84ym415zqezi"
    },
    {
      "id": "ot-ht-l04-t3c02",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a characteristic of HF communication compared with communications on VHF and higher frequencies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "HF antennas are generally smaller"
        },
        {
          "modality": "text",
          "value": "HF accommodates wider bandwidth signals"
        },
        {
          "modality": "text",
          "value": "Long-distance ionospheric propagation is far more common on HF"
        },
        {
          "modality": "text",
          "value": "There is less atmospheric interference (static) on HF"
        }
      ],
      "correctIndex": 2,
      "explanation": "Long-distance ionospheric propagation is far more common on high frequency (HF) than on very high frequency (VHF) and higher frequencies.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13un9l261lsvq"
    },
    {
      "id": "ot-ht-l04-t3c09",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is generally the best time for long-distance 10-meter band propagation via the F region?"
      },
      "options": [
        {
          "modality": "text",
          "value": "From dawn to shortly after sunset during periods of high sunspot activity"
        },
        {
          "modality": "text",
          "value": "From shortly after sunset to dawn during periods of high sunspot activity"
        },
        {
          "modality": "text",
          "value": "From dawn to shortly after sunset during periods of low sunspot activity"
        },
        {
          "modality": "text",
          "value": "From shortly after sunset to dawn during periods of low sunspot activity"
        }
      ],
      "correctIndex": 0,
      "explanation": "The best time for long-distance 10-meter F region paths is from dawn to shortly after sunset during high sunspot activity.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "16r24kaeckawy"
    },
    {
      "id": "ot-ht-l04-t3c10",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following bands may provide long-distance communications via the ionosphere’s F region during the peak of the sunspot cycle?"
      },
      "options": [
        {
          "modality": "text",
          "value": "6 and 10 meters"
        },
        {
          "modality": "text",
          "value": "23 centimeters"
        },
        {
          "modality": "text",
          "value": "70 centimeters and 1.25 meters"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "At the sunspot peak the 6-meter and 10-meter bands may provide long-distance F region communications. The other bands listed do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1yp6t2dco4w99"
    },
    {
      "id": "ot-ht-l04-t3c03",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is one characteristic of VHF signals received via auroral backscatter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They are often received from 10,000 miles or more"
        },
        {
          "modality": "text",
          "value": "They are distorted, with a characteristic raspy sound"
        },
        {
          "modality": "text",
          "value": "They occur only during winter nighttime hours"
        },
        {
          "modality": "text",
          "value": "They are generally strongest when your antenna is aimed west"
        }
      ],
      "correctIndex": 1,
      "explanation": "Very high frequency (VHF) signals received by auroral backscatter are distorted, with a characteristic raspy sound.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9gxy0u8iuvq"
    },
    {
      "id": "ot-ht-l04-t3c04",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following types of propagation is most commonly associated with occasional strong signals on the 10-, 6-, and 2-meter bands from beyond the radio horizon?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Backscatter"
        },
        {
          "modality": "text",
          "value": "Sporadic E"
        },
        {
          "modality": "text",
          "value": "D region absorption"
        },
        {
          "modality": "text",
          "value": "Gray-line propagation"
        }
      ],
      "correctIndex": 1,
      "explanation": "Sporadic E is most commonly associated with occasional strong signals on 10, 6 and 2 meters from beyond the radio horizon.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8xsbdp1odps9z"
    },
    {
      "id": "ot-ht-l04-t3c07",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What band is best suited for communicating via meteor scatter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "33 centimeters"
        },
        {
          "modality": "text",
          "value": "6 meters"
        },
        {
          "modality": "text",
          "value": "2 meters"
        },
        {
          "modality": "text",
          "value": "70 centimeters"
        }
      ],
      "correctIndex": 1,
      "explanation": "Meteor scatter is best suited to the 6-meter band.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1gv1khhdaa9gb"
    },
    {
      "id": "ot-ht-l04-t3c05",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following effects may allow radio signals to travel beyond obstructions between the transmitting and receiving stations?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Knife-edge diffraction"
        },
        {
          "modality": "text",
          "value": "Faraday rotation"
        },
        {
          "modality": "text",
          "value": "Quantum tunneling"
        },
        {
          "modality": "text",
          "value": "Doppler shift"
        }
      ],
      "correctIndex": 0,
      "explanation": "Knife-edge diffraction may let signals travel beyond obstructions between stations. Faraday rotation, quantum tunneling and Doppler shift do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "4uypns1srnglw"
    },
    {
      "id": "ot-ht-l04-t3c06",
      "shape": "mcq",
      "tags": [
        "propagation",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of propagation is responsible for allowing over-the-horizon VHF and UHF communications to ranges of approximately 300 miles on a regular basis?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Tropospheric ducting"
        },
        {
          "modality": "text",
          "value": "D region refraction"
        },
        {
          "modality": "text",
          "value": "F2 region refraction"
        },
        {
          "modality": "text",
          "value": "Faraday rotation"
        }
      ],
      "correctIndex": 0,
      "explanation": "Tropospheric ducting regularly carries very high frequency (VHF) and ultra high frequency (UHF) signals over the horizon to about 300 miles.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lpwaufmgmeo9"
    },
    {
      "id": "ot-ht-l04-t3c08",
      "shape": "mcq",
      "tags": [
        "propagation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What causes tropospheric ducting?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Discharges of lightning during electrical storms"
        },
        {
          "modality": "text",
          "value": "Sunspots and solar flares"
        },
        {
          "modality": "text",
          "value": "Updrafts from hurricanes and tornadoes"
        },
        {
          "modality": "text",
          "value": "Temperature inversions in the atmosphere"
        }
      ],
      "correctIndex": 3,
      "explanation": "Tropospheric ducting is caused by temperature inversions in the atmosphere, not lightning, sunspots or storm updrafts.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1hyenys13w2ysq"
    },
    {
      "id": "ht-l05-f-power-rating",
      "shape": "fact",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Mobile Radio Power Supply Rating",
      "body": "A typical 50-watt output mobile frequency modulated (FM) transceiver is powered from a supply rated **13.8 volts at 12 amperes**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple block diagram, left to right. On the left is a plain rectangular power supply box with two output terminals, marked red (+) and black (-). Two parallel wires run right to a plain rectangular transceiver box. A rating plate on the supply box gives the voltage and current. A small tag on the transceiver box gives its output power. Arrows along the wires point from the supply to the transceiver to show the direction of power flow.",
        "imageSearchTerm": "Power supply for a 50-watt mobile radio",
        "alt": "Power supply for a 50-watt mobile radio: 13.8 volts at 12 amperes, feeding a 50-watt frequency modulated (FM) mobile transceiver.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-power-rating.ccceca8b.webp"
      },
      "uid": "587krkwssa2y"
    },
    {
      "id": "ht-l05-f-swr-meter",
      "shape": "fact",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Choosing an SWR Meter",
      "body": "An accessory **standing wave ratio (SWR) meter** is chosen by considering the frequency and power level at which the measurements will be made.",
      "illustration": {
        "imagePrompt": "A standing wave ratio (SWR) and power meter with two analog needle meters and antenna and transmitter connectors.",
        "imageSearchTerm": "SWR meter",
        "alt": "A standing wave ratio (SWR) and power meter with one analog needle meter showing watt and SWR scales, and transmitter and antenna connectors on its sides.",
        "kind": "photo",
        "credit": "Wikimedia Commons · 魔私利戸 · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:SWR_&_power_meter_front_view.jpg",
        "subject": "An SWR and power meter with two analog needle meters and antenna and transmitter connectors.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-swr-meter.1e8c25ac.webp"
      },
      "uid": "1x4wj521toicx6"
    },
    {
      "id": "ht-l05-f-swr-meter-hero",
      "shape": "fact",
      "title": "Frequency and Power Decide",
      "body": "When choosing an accessory standing wave ratio (SWR) meter, consider the frequency and power level at which the measurements will be made.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A standing wave ratio (SWR) and power meter with two analog needle meters and antenna and transmitter connectors.",
        "imageSearchTerm": "SWR meter",
        "alt": "A standing wave ratio (SWR) and power meter with one analog needle meter showing watt and SWR scales, and transmitter and antenna connectors on its sides.",
        "kind": "photo",
        "credit": "Wikimedia Commons · 魔私利戸 · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:SWR_&_power_meter_front_view.jpg",
        "subject": "An SWR and power meter with two analog needle meters and antenna and transmitter connectors.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-swr-meter.1e8c25ac.webp"
      },
      "uid": "e7icih28f5x"
    },
    {
      "id": "ht-l05-f-short-heavy-wires",
      "shape": "fact",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Short, Heavy Power Wires",
      "body": "A transceiver's direct current (DC) power connection uses short, heavy-gauge wires. They are used to minimize **voltage drop** when transmitting.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transceiver box in the middle. A power supply box on one side, linked to the transceiver by a short, thick line. A negative return line runs from the transceiver to a chassis ground symbol, labelled as the 12-volt battery chassis ground. The power supply box carries its rating.",
        "imageSearchTerm": "Wiring a Mobile Radio",
        "alt": "Wiring a mobile radio: a 13.8-volt, 12-ampere power supply, short heavy-gauge direct current (DC) power wires, and the negative return at the 12-volt battery chassis ground.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-short-heavy-wires.789d035b.webp"
      },
      "uid": "4xyaea1mqoypc"
    },
    {
      "id": "ht-l05-f-ft8-audio",
      "shape": "fact",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Connecting a Radio for FT8",
      "body": "To operate FT8, the transceiver's audio input and output connect to the audio output and input of a computer running FT8 software.",
      "uid": "1xc3o221cfzdpy"
    },
    {
      "id": "ht-l05-f-rf-power-meter",
      "shape": "fact",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Where the Power Meter Goes",
      "body": "A **radio frequency (RF) power meter** is installed in the feed line, between the transmitter and the antenna.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right line: a transmitter box, then a feed line, then an antenna. The power meter sits in the feed line, between the transmitter and the antenna. Nothing else is drawn on the line.",
        "imageSearchTerm": "Where the RF Power Meter Goes",
        "alt": "Where the radio frequency (RF) power meter goes: in the feed line, between the transmitter and the antenna.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-rf-power-meter.eedbed3a.webp"
      },
      "uid": "vgu4yuise2re"
    },
    {
      "id": "ht-l05-f-interface-signals",
      "shape": "fact",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Three Signals in a Digital Interface",
      "body": "A computer-radio interface for digital modes carries three signals: receive audio, transmit audio and transmitter keying.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two boxes, a computer running digital mode software on the left and a transceiver on the right. Three arrows join them: one arrow labelled receive audio, pointing from the transceiver to the computer; one labelled transmit audio, pointing from the computer to the transceiver; and one labelled transmitter keying, pointing from the computer to the transceiver.",
        "imageSearchTerm": "Three Signals Between Computer and Radio",
        "alt": "Three signals between computer and radio: receive audio, transmit audio and transmitter keying passing between a computer and a transceiver for digital modes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-interface-signals.536b7b14.webp"
      },
      "uid": "xrdei01wykrra"
    },
    {
      "id": "ht-l05-f-line-in",
      "shape": "fact",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Computer Line In to Speaker Jack",
      "body": "One required connection between a computer and a transceiver for digital modes is the computer's \"line in\" to the transceiver's speaker connector.",
      "uid": "c7cg341r0ja0s"
    },
    {
      "id": "ht-l05-f-bonding-strap",
      "shape": "fact",
      "tags": [
        "station-setup",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Best Conductor for RF Bonding",
      "body": "The preferred conductor for **bonding** at radio frequency (RF) is flat copper strap.",
      "uid": "zw4p3rwbqohv"
    },
    {
      "id": "ht-l05-f-battery-runtime",
      "shape": "fact",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Battery Run Time",
      "body": "To find how long a battery can power equipment, divide the battery's **ampere-hour** rating by the average current draw of the equipment.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A plain battery block on the left with a tag for its ampere-hour rating. A generic radio box on the right with a tag for its average current draw. Below them, a large written division set out like a fraction: ampere-hour rating on top, average current draw underneath, an equals sign, then a clock icon for run time. Thin dashed lines lead from each tag down to its place in the fraction.",
        "imageSearchTerm": "Working out battery run time",
        "alt": "Working out battery run time. Run time comes from dividing the battery's ampere-hour rating by the equipment's average current draw.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-battery-runtime.e6c76c64.webp"
      },
      "uid": "9609hl137a3s7"
    },
    {
      "id": "ht-l05-f-hotspot",
      "shape": "fact",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Hotspot Does",
      "body": "A digital mode **hotspot** gives nearby transceivers communication with a digital voice or data network.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A block diagram. On the left, two or three small generic handheld transceiver outlines sit close together. Short two-way radio-wave arcs run between them and a small central box labeled as the hotspot. From the hotspot, a two-way arrow runs right to a cloud shape labeled as the digital voice or data network. All arrows are double-headed to show that traffic flows both ways.",
        "imageSearchTerm": "What a hotspot connects",
        "alt": "What a hotspot connects: the hotspot as the link between nearby transceivers and a digital voice or data network.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-hotspot.f2f51204.webp"
      },
      "uid": "9kpiha1u3yod8"
    },
    {
      "id": "ht-l05-f-negative-return",
      "shape": "fact",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Negative Return in a Vehicle",
      "body": "In a vehicle, the negative power return of a mobile transceiver is connected at the 12-volt battery chassis ground.",
      "uid": "17o4jyc1iodxa"
    },
    {
      "id": "ht-l05-f-electronic-keyer",
      "shape": "fact",
      "tags": [
        "station-setup",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What an Electronic Keyer Is",
      "body": "An **electronic keyer** is a device that assists in manual sending of Morse code.",
      "illustration": {
        "imagePrompt": "A Morse code paddle key and keyer on a wooden operating desk beside a transceiver.",
        "imageSearchTerm": "morse code paddle key desk",
        "alt": "Morse code paddle key on a radio operating desk",
        "kind": "photo"
      },
      "uid": "1qt8ujtza4qsp"
    },
    {
      "id": "ht-l05-d-rtty",
      "shape": "definition",
      "tags": [
        "digital-modes",
        "emissions"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Radioteletype (RTTY)"
      },
      "definition": {
        "modality": "text",
        "value": "Narrow-band direct-printing telegraphy; only an authorized digital code may be sent",
        "short": "Direct-printing telegraphy, digital code"
      },
      "uid": "1i6fg6a64a6f0"
    },
    {
      "id": "ht-l05-q-heavy-wires",
      "shape": "mcq",
      "tags": [
        "power",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee shortens and thickens the direct current (DC) leads to a mobile radio. What does this mainly reduce?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Supply output impedance mismatch"
        },
        {
          "modality": "text",
          "value": "Voltage drop while transmitting"
        },
        {
          "modality": "text",
          "value": "Radiative loss in the cable"
        },
        {
          "modality": "text",
          "value": "Radio frequency interference"
        }
      ],
      "correctIndex": 1,
      "explanation": "Short, heavy wires cut voltage drop when transmitting. They are not used to match the supply's impedance or to stop radiation or interference.",
      "uid": "buglbra7tym7"
    },
    {
      "id": "ht-l05-q-negative-lead",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee wires a mobile rig into a car. Where does the negative power lead go?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The radio's mounting bracket"
        },
        {
          "modality": "text",
          "value": "Shell of the power connector"
        },
        {
          "modality": "text",
          "value": "Any bare metal part of the car"
        },
        {
          "modality": "text",
          "value": "The battery chassis ground"
        }
      ],
      "correctIndex": 3,
      "explanation": "The negative return belongs at the 12-volt battery chassis ground. A random metal part, the bracket or the connector shell is not the correct point.",
      "uid": "1kc6el41uphlfu"
    },
    {
      "id": "ht-l05-q-battery-time",
      "shape": "mcq",
      "tags": [
        "power",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants to estimate how long a battery can run a radio. Which calculation applies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Watt-hours ÷ peak power use"
        },
        {
          "modality": "text",
          "value": "Current squared × resistance"
        },
        {
          "modality": "text",
          "value": "Ampere-hours ÷ average current"
        },
        {
          "modality": "text",
          "value": "Watts per hour × battery rating"
        }
      ],
      "correctIndex": 2,
      "explanation": "Run time is the ampere-hour rating divided by the equipment's average current draw. Peak power is not used.",
      "uid": "1dytu33kjlwp3"
    },
    {
      "id": "ht-l05-q-meter-place",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants to read transmitter output with a radio frequency (RF) power meter. Where is it installed?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At the power supply output"
        },
        {
          "modality": "text",
          "value": "In the feed line to the antenna"
        },
        {
          "modality": "text",
          "value": "In the power cable by the radio"
        },
        {
          "modality": "text",
          "value": "Across the push-to-talk line"
        }
      ],
      "correctIndex": 1,
      "explanation": "The meter is installed in the feed line between the transmitter and the antenna. The power supply output, the power cable and the push-to-talk line are not where it goes.",
      "uid": "1lw4lj0kyd7bw"
    },
    {
      "id": "ht-l05-tf-wire-voltage-drop",
      "shape": "trueFalse",
      "tags": [
        "power",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Short, heavy-gauge direct current (DC) wires are used to minimize voltage drop when transmitting.",
      "isTrue": true,
      "why": "Minimizing voltage drop when transmitting is the reason for short, heavy-gauge DC power wires.",
      "uid": "4cxmzk1f362em"
    },
    {
      "id": "ht-l05-tf-hotspot-ft8",
      "shape": "trueFalse",
      "tags": [
        "digital-modes",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A digital mode hotspot is a smartphone that makes FT8 contacts over the internet.",
      "isTrue": false,
      "why": "A hotspot gives nearby transceivers communication with a digital voice or data network. It is not an FT8 smartphone setup.",
      "uid": "1aw7x1l1vb8lmt"
    },
    {
      "id": "ht-l05-c-bonding-strap",
      "shape": "cloze",
      "tags": [
        "station-setup",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "The preferred conductor for bonding at radio frequency (RF) is flat copper ___.",
      "answer": "strap",
      "distractors": [
        "braid",
        "wire",
        "cable"
      ],
      "explanation": "Flat copper strap is the preferred conductor for bonding at RF. Copper braid (such as braid removed from coaxial cable), wire and cable are not the preferred choice.",
      "uid": "1jlg0m95aq3ct"
    },
    {
      "id": "ht-l05-p-keyer",
      "shape": "pair",
      "tags": [
        "station-setup",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Electronic keyer"
      },
      "sideB": {
        "modality": "text",
        "value": "Aids manual Morse code sending"
      },
      "uid": "i5j3527njcnm"
    },
    {
      "id": "ht-l05-f-mic-gain",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Too Much Microphone Gain",
      "body": "Excessive **microphone gain** on single sideband (SSB) transmissions distorts the transmitted audio.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a desk microphone wired to a transmitter box. On the transmitter's front, a large gain knob whose pointer is turned all the way to the top of its scale, where the scale turns red. From the transmitter's antenna, a signal arrow runs right to a light panel showing the transmitted audio: a voice waveform whose peaks are flattened and ragged, plainly misshapen. The knob carries the gain label, the waveform carries the distorted-audio label, and a caption names the mode.",
        "imageSearchTerm": "Too much microphone gain",
        "alt": "A microphone feeds a transmitter whose gain knob is turned up into the red, and the transmitted single sideband (SSB) audio comes out as a misshapen, distorted waveform.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-mic-gain.c035a20c.webp"
      },
      "uid": "1pwkhu919s6wfp"
    },
    {
      "id": "ht-l05-f-enter-frequency",
      "shape": "fact",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Entering an Operating Frequency",
      "body": "A transceiver's operating frequency is entered with the keypad or the variable frequency oscillator (VFO) knob.",
      "uid": "1la49zg17s05ao"
    },
    {
      "id": "ht-l05-f-squelch-weak",
      "shape": "fact",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Squelch for Weak FM Signals",
      "body": "To hear a weak frequency modulated (FM) signal, the **squelch** threshold is set so that receiver output audio is on all the time.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A vertical signal-level scale on the left with a weak signal drawn as a short bar near the bottom. A horizontal dashed line marks the squelch threshold, placed at the bottom of the scale so even the weak signal is above it. To the right, a speaker icon emits sound waves continuously. A simple timeline strip under the speaker is solid along its whole length, meaning the audio is on all the time.",
        "imageSearchTerm": "Squelch set to hear weak FM signals",
        "alt": "Squelch set to hear weak frequency modulated (FM) signals: the threshold sits below the weak signal, so the receiver's audio is on all the time.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-squelch-weak.8573f579.webp"
      },
      "uid": "izszn11fvhcw7"
    },
    {
      "id": "ht-l05-f-off-frequency",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "FM Received Off Frequency",
      "body": "A frequency modulated (FM) signal received slightly off frequency sounds distorted.",
      "uid": "1jokgkx171rdlx"
    },
    {
      "id": "ht-l05-f-scanning",
      "shape": "fact",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Scanning Does",
      "body": "The **scanning** function of a frequency modulated (FM) transceiver tunes through a range of frequencies to check for activity.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal frequency axis with evenly spaced tick marks, each a frequency to check. Small brackets mark where the scanned range starts and ends. A curved arrow sweeps left to right across the ticks to show the transceiver tuning through them. Most ticks have a small empty circle, meaning nothing heard. One tick has a filled circle with a small signal symbol, meaning activity was found there.",
        "imageSearchTerm": "Scanning a range of frequencies",
        "alt": "Scanning a range of frequencies: scanning as a step-by-step tuning across a frequency range, checking each step for activity.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-scanning.3f677414.webp"
      },
      "uid": "1q1q12v196atqp"
    },
    {
      "id": "ht-l05-f-rit-clarifier",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Fixing Pitch with the RIT",
      "body": "The **receiver incremental tuning (RIT)** control, also called the **clarifier**, fixes a single sideband (SSB) voice that sounds too high or low.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a speech bubble from a speaker icon with an upward arrow labeled as too high and a downward arrow labeled as too low. In the center, a single generic rotary knob labeled as the RIT or clarifier, with curved arrows showing it turns both ways. On the right, the speaker icon again with a level speech bubble showing the corrected voice. Arrows lead left to right through the knob.",
        "imageSearchTerm": "Fixing SSB voice pitch with the RIT",
        "alt": "Fixing single sideband (SSB) voice pitch: the receiver incremental tuning (RIT) control, also called the clarifier, corrects a voice that sounds too high or too low.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-rit-clarifier.552203ba.webp"
      },
      "uid": "1f9elqoi0kx5u"
    },
    {
      "id": "ht-l05-f-code-plug",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a DMR Code Plug Is",
      "body": "On a Digital Mobile Radio (DMR) transceiver, a **code plug** is configuration data loaded onto the radio to access repeaters and talkgroups.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a document-style data block labeled as the code plug, holding two short lists: repeaters and talkgroups. A single arrow runs right into a generic handheld radio outline, showing the data being loaded onto it. From the radio, two arrows branch right: one to a small repeater-tower icon and one to a small group-of-stations icon.",
        "imageSearchTerm": "What a DMR code plug holds",
        "alt": "What a Digital Mobile Radio (DMR) code plug holds: configuration data, loaded onto the radio, that gives it access to repeaters and talkgroups.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-code-plug.c8cc73ac.webp"
      },
      "uid": "1ao5ib0klcc0a"
    },
    {
      "id": "ht-l05-f-filter-choice",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Choose a Filter Bandwidth",
      "body": "A multimode transceiver offers a choice of receiver **filter bandwidths**. Noise or interference can be reduced by selecting a bandwidth matching the mode.",
      "uid": "1iz1wpf1b9tg0f"
    },
    {
      "id": "ht-l05-f-dmr-group",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Selecting a DMR Group",
      "body": "A specific group of stations is selected on a Digital Mobile Radio (DMR) transceiver by entering the group's identification code.",
      "uid": "kg13yn1v1hyxj"
    },
    {
      "id": "ht-l05-f-ssb-bandwidth",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Best SSB Filter Width",
      "body": "For single sideband (SSB) reception, a receiver filter bandwidth of 2400 hertz (Hz) provides the best signal-to-noise ratio.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal bar chart. Four bars are drawn, each as long as its bandwidth on a common hertz scale: 500 Hz, 1000 Hz, 2400 Hz and 5000 Hz. The 2400 Hz bar is highlighted and marked as best for SSB. The other three bars are plain, with no extra notes.",
        "imageSearchTerm": "Receiver filter widths for SSB",
        "alt": "Receiver filter widths of 500, 1000, 2400 and 5000 hertz, with 2400 hertz giving the best signal-to-noise ratio for single sideband (SSB).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l05-f-ssb-bandwidth.adea7369.webp"
      },
      "uid": "1wqepvk19ubr9i"
    },
    {
      "id": "ht-l05-f-dstar-call-sign",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "identification"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Call Sign for Digital Radio",
      "body": "A Digital Smart Technologies for Amateur Radio (D-STAR) digital transceiver must have the operator's **call sign** programmed into it before transmitting.",
      "uid": "1ko1aeofiqrqi"
    },
    {
      "id": "ht-l05-q-pitch-control",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A single sideband (SSB) station's voice sounds too high-pitched. Which control corrects the pitch?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The tone squelch"
        },
        {
          "modality": "text",
          "value": "The automatic gain control"
        },
        {
          "modality": "text",
          "value": "The clarifier control"
        },
        {
          "modality": "text",
          "value": "The bandwidth selection"
        }
      ],
      "correctIndex": 2,
      "explanation": "The clarifier, also called the receiver incremental tuning control, shifts the pitch. Bandwidth selection and tone squelch do not.",
      "uid": "16tqs702ztegy"
    },
    {
      "id": "ht-l05-q-weak-fm-squelch",
      "shape": "mcq",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A weak frequency modulated (FM) signal keeps getting cut off by the squelch. What setting lets it be heard?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Anti-squelch turned on"
        },
        {
          "modality": "text",
          "value": "Squelch enhancement enabled"
        },
        {
          "modality": "text",
          "value": "Audio turned up past threshold"
        },
        {
          "modality": "text",
          "value": "Squelch set so audio stays on"
        }
      ],
      "correctIndex": 3,
      "explanation": "The squelch threshold is set so receiver output audio is on all the time. Turning up the audio level past the threshold, anti-squelch and squelch enhancement are not the method.",
      "uid": "xq4md31yj68sv"
    },
    {
      "id": "ht-l05-q-ssb-width",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants the cleanest single sideband (SSB) reception. Which filter bandwidth, in hertz (Hz), is best?"
      },
      "options": [
        {
          "modality": "text",
          "value": "5000 Hz"
        },
        {
          "modality": "text",
          "value": "500 Hz"
        },
        {
          "modality": "text",
          "value": "1000 Hz"
        },
        {
          "modality": "text",
          "value": "2400 Hz"
        }
      ],
      "correctIndex": 3,
      "explanation": "2400 Hz gives the best signal-to-noise ratio for SSB. 500 Hz, 1000 Hz and 5000 Hz are not the best choices.",
      "uid": "ktg2honyyzb8"
    },
    {
      "id": "ht-l05-q-dmr-load",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new Digital Mobile Radio (DMR) radio has no repeaters or talkgroups stored. What is loaded to supply them?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A digital voice coder-decoder"
        },
        {
          "modality": "text",
          "value": "Code plug configuration data"
        },
        {
          "modality": "text",
          "value": "A computer-access adapter cable"
        },
        {
          "modality": "text",
          "value": "Manufacturer software upgrade"
        }
      ],
      "correctIndex": 1,
      "explanation": "A code plug is configuration data loaded onto the radio. A CODEC converts voice data, and a cable or upgrade does not supply repeaters or talkgroups.",
      "uid": "g7y4i5e4kmox"
    },
    {
      "id": "ht-l05-tf-gain-inversion",
      "shape": "trueFalse",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Excessive microphone gain on single sideband (SSB) transmissions causes sideband inversion.",
      "isTrue": false,
      "why": "Excessive microphone gain distorts the transmitted audio. It does not cause sideband inversion.",
      "uid": "4ru2x311jmiv"
    },
    {
      "id": "ht-l05-tf-dstar-call",
      "shape": "trueFalse",
      "tags": [
        "digital-modes",
        "identification"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A Digital Smart Technologies for Amateur Radio (D-STAR) transceiver needs the operator's call sign programmed in before it transmits.",
      "isTrue": true,
      "why": "The operator's call sign must be programmed into a D-STAR transceiver before transmitting.",
      "uid": "1uw75n2e7ngu0"
    },
    {
      "id": "ht-l05-c-dmr-group-code",
      "shape": "cloze",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A Digital Mobile Radio (DMR) transceiver selects a group of stations by entering the group's ___.",
      "answer": "identification code",
      "distractors": [
        "squelch tone",
        "memory frequency",
        "repeater offset"
      ],
      "explanation": "The group is chosen by entering its identification code. Enabling a Continuous Tone-Coded Squelch System (CTCSS) tone, recalling memory frequencies or setting a repeater offset does not select it.",
      "uid": "1uhko6k1hehu4w"
    },
    {
      "id": "ht-l05-p-scanning",
      "shape": "pair",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Scanning"
      },
      "sideB": {
        "modality": "text",
        "value": "Tunes through frequencies to check activity"
      },
      "uid": "fi0b2lx31nsn"
    },
    {
      "id": "ht-l05-q-swr-choice",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee is choosing an accessory standing wave ratio (SWR) meter. What should be considered?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Distance from meter to antenna"
        },
        {
          "modality": "text",
          "value": "Maximum mismatch expected on the line"
        },
        {
          "modality": "text",
          "value": "Meter's compensation for poor match",
          "short": "Compensation for poor match"
        },
        {
          "modality": "text",
          "value": "Frequency and power level measured",
          "short": "Frequency and power level"
        }
      ],
      "correctIndex": 3,
      "explanation": "The meter is chosen by the frequency and power level of the measurements. Its distance from the antenna and the SWR expected on the line are not the considerations.",
      "uid": "15trhihthpolp"
    },
    {
      "id": "ht-l05-q-digital-signals",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A laptop is linked to a transceiver for a digital mode. Which signals does the interface carry?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Mode, status and location"
        },
        {
          "modality": "text",
          "value": "Antenna and radio frequency power",
          "short": "Antenna, radio frequency power"
        },
        {
          "modality": "text",
          "value": "Receive audio, transmit audio, keying",
          "short": "Receive, transmit audio, keying"
        },
        {
          "modality": "text",
          "value": "Location data and direct current"
        }
      ],
      "correctIndex": 2,
      "explanation": "The interface carries receive audio, transmit audio and transmitter keying. Location data, antenna connections and power are not among them.",
      "uid": "1dzj7pf1gsgrnp"
    },
    {
      "id": "ht-l05-tf-line-out",
      "shape": "trueFalse",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "For digital modes, one required connection is the computer's \"line in\" to the transceiver's speaker connector.",
      "isTrue": true,
      "why": "The computer's \"line in\" to the transceiver's speaker connector is one required connection; \"line out\" to that connector is wrong.",
      "uid": "exm447otpu9n"
    },
    {
      "id": "ot-ht-l05-t4a01",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an appropriate power supply rating for a typical 50-watt output mobile FM transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "24.0 volts at 4 amperes"
        },
        {
          "modality": "text",
          "value": "13.8 volts at 4 amperes"
        },
        {
          "modality": "text",
          "value": "24.0 volts at 12 amperes"
        },
        {
          "modality": "text",
          "value": "13.8 volts at 12 amperes"
        }
      ],
      "correctIndex": 3,
      "explanation": "A typical 50-watt output mobile frequency modulated (FM) transceiver runs from a supply rated 13.8 volts at 12 amperes. The 24.0-volt ratings and the 4-ampere rating are wrong for that radio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "yf7blnh786il"
    },
    {
      "id": "ot-ht-l05-t4a03",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why are short, heavy-gauge wires used for a transceiver’s DC power connection?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To minimize voltage drop when transmitting"
        },
        {
          "modality": "text",
          "value": "To provide a close match to the power supply output impedance"
        },
        {
          "modality": "text",
          "value": "To avoid RF interference"
        },
        {
          "modality": "text",
          "value": "To minimize radiative losses in the power cable"
        }
      ],
      "correctIndex": 0,
      "explanation": "Short, heavy-gauge wires minimize voltage drop when transmitting. They are not used for impedance matching, radio frequency (RF) interference or radiative losses. DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ixz31n9svy7d"
    },
    {
      "id": "ot-ht-l05-t4a09",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "How can you determine the length of time that equipment can be powered from a battery?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Divide the watt-hour rating of the battery by the peak power consumption of the equipment"
        },
        {
          "modality": "text",
          "value": "Divide the battery ampere-hour rating by the average current draw of the equipment"
        },
        {
          "modality": "text",
          "value": "Multiply the watts per hour consumed by the equipment by the battery power rating"
        },
        {
          "modality": "text",
          "value": "Multiply the square of the battery's current rating by the equipment's input resistance"
        }
      ],
      "correctIndex": 1,
      "explanation": "Run time is the battery's ampere-hour rating divided by the equipment's average current draw. Peak power consumption is not used.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13gfzwkjlpmhw"
    },
    {
      "id": "ot-ht-l05-t4a08",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following conductors is preferred for bonding at RF?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Copper braid removed from coaxial cable"
        },
        {
          "modality": "text",
          "value": "Copper-clad steel wire"
        },
        {
          "modality": "text",
          "value": "Twisted-pair cable"
        },
        {
          "modality": "text",
          "value": "Flat copper strap"
        }
      ],
      "correctIndex": 3,
      "explanation": "Flat copper strap is the preferred conductor for bonding at radio frequency (RF). Coax braid, copper-clad steel wire and twisted-pair cable are not preferred.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1h20ypn2o2ogn"
    },
    {
      "id": "ot-ht-l05-t4a11",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Where should the negative power return of a mobile transceiver be connected in a vehicle?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At the 12-volt battery chassis ground"
        },
        {
          "modality": "text",
          "value": "To the shell of the power connector"
        },
        {
          "modality": "text",
          "value": "To any metal part of the vehicle"
        },
        {
          "modality": "text",
          "value": "Through the transceiver’s mounting bracket"
        }
      ],
      "correctIndex": 0,
      "explanation": "The negative power return of a mobile transceiver goes at the 12-volt battery chassis ground, not the connector shell, any metal part or the bracket.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "iaprd11wm688x"
    },
    {
      "id": "ot-ht-l05-t4a05",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Where should an RF power meter be installed?"
      },
      "options": [
        {
          "modality": "text",
          "value": "In the feed line, between the transmitter and antenna"
        },
        {
          "modality": "text",
          "value": "At the power supply output"
        },
        {
          "modality": "text",
          "value": "In parallel with the push-to-talk line and the antenna"
        },
        {
          "modality": "text",
          "value": "In the power supply cable, as close as possible to the radio"
        }
      ],
      "correctIndex": 0,
      "explanation": "A radio frequency (RF) power meter goes in the feed line between the transmitter and the antenna, not at the power supply output or in the power cable.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8ajb4a1h7ppoq"
    },
    {
      "id": "ot-ht-l05-t4a02",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following should be considered when selecting an accessory SWR meter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The frequency and power level at which the measurements will be made"
        },
        {
          "modality": "text",
          "value": "The distance that the meter will be located from the antenna"
        },
        {
          "modality": "text",
          "value": "The maximum SWR anticipated on the transmission line"
        },
        {
          "modality": "text",
          "value": "The ability of the meter to compensate for a poor transmission line match to the antenna"
        }
      ],
      "correctIndex": 0,
      "explanation": "An accessory standing wave ratio (SWR) meter is chosen by the frequency and power level of the measurements. Distance, expected SWR and match compensation are not the considerations.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1tmyex1153550b"
    },
    {
      "id": "ot-ht-l05-t4a04",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "How are the audio input and output of a transceiver connected in a station configured to operate using FT8?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To a computer running a terminal program and connected to a terminal node controller unit"
        },
        {
          "modality": "text",
          "value": "To the audio output and input of a computer running FT8 software"
        },
        {
          "modality": "text",
          "value": "To an FT8 conversion unit, a keyboard, and a computer monitor"
        },
        {
          "modality": "text",
          "value": "To a computer connected to the FT8converter.com website"
        }
      ],
      "correctIndex": 1,
      "explanation": "For FT8, the transceiver's audio input and output connect to the audio output and input of a computer running FT8 software.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "xccma22yw2k0"
    },
    {
      "id": "ot-ht-l05-t4a06",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What signals are used in a computer-radio interface for digital mode operation?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Receive and transmit mode, status, and location"
        },
        {
          "modality": "text",
          "value": "Antenna and RF power"
        },
        {
          "modality": "text",
          "value": "Receive audio, transmit audio, and transmitter keying"
        },
        {
          "modality": "text",
          "value": "NMEA GPS location and DC power"
        }
      ],
      "correctIndex": 2,
      "explanation": "A computer-radio interface for digital modes carries receive audio, transmit audio and transmitter keying. Location data, antenna and direct current (DC) power are not among them. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "zv1sixt8r36t"
    },
    {
      "id": "ot-ht-l05-t4a07",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is one of the connections required between a computer and a transceiver to operate digital modes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Computer “line out” to transceiver push-to-talk"
        },
        {
          "modality": "text",
          "value": "Computer “line in” to transceiver push-to-talk"
        },
        {
          "modality": "text",
          "value": "Computer “line in” to transceiver speaker connector"
        },
        {
          "modality": "text",
          "value": "Computer “line out” to transceiver speaker connector"
        }
      ],
      "correctIndex": 2,
      "explanation": "One required connection is the computer's \"line in\" to the transceiver's speaker connector. \"Line out\" to the speaker connector is wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1p50u0w1msaf76"
    },
    {
      "id": "ot-ht-l05-t4a10",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What function does a digital mode hotspot perform for nearby transceivers?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Communication with a digital voice or data network"
        },
        {
          "modality": "text",
          "value": "FT8 digital communications via AFSK using a smartphone connected to the internet"
        },
        {
          "modality": "text",
          "value": "RTTY encoding and decoding without a computer"
        },
        {
          "modality": "text",
          "value": "High-speed digital communications for meteor scatter"
        }
      ],
      "correctIndex": 0,
      "explanation": "A hotspot gives nearby transceivers communication with a digital voice or data network. It is not an FT8 smartphone setup or a radioteletype (RTTY) device. AFSK stands for audio frequency-shift keying.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qrsdep15j3fw9"
    },
    {
      "id": "ot-ht-l05-t4a12",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an electronic keyer?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A device for switching antennas from transmit to receive"
        },
        {
          "modality": "text",
          "value": "A device for voice activated switching from receive to transmit"
        },
        {
          "modality": "text",
          "value": "A device that assists in manual sending of Morse code"
        },
        {
          "modality": "text",
          "value": "An interlock to prevent unauthorized use of a radio"
        }
      ],
      "correctIndex": 2,
      "explanation": "An electronic keyer assists in manual sending of Morse code. It is not an antenna switch, voice-activated switch or interlock.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "yh8jyp1msq7tp"
    },
    {
      "id": "ot-ht-l05-t4b02",
      "shape": "mcq",
      "tags": [
        "operating",
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can be used to enter a transceiver’s operating frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The keypad or VFO knob"
        },
        {
          "modality": "text",
          "value": "The CTCSS or DTMF encoder"
        },
        {
          "modality": "text",
          "value": "The Automatic Frequency Control"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "The keypad or the variable frequency oscillator (VFO) knob enters a frequency. The Continuous Tone-Coded Squelch System (CTCSS) or Dual-Tone Multi-Frequency (DTMF) encoder and Automatic Frequency Control do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qkyusr1ml31t3"
    },
    {
      "id": "ot-ht-l05-t4b05",
      "shape": "mcq",
      "tags": [
        "operating",
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the scanning function of an FM transceiver do?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Checks incoming signal deviation"
        },
        {
          "modality": "text",
          "value": "Prevents interference to nearby repeaters"
        },
        {
          "modality": "text",
          "value": "Tunes through a range of frequencies to check for activity"
        },
        {
          "modality": "text",
          "value": "Tunes through a range of frequencies to determine the antenna’s resonant frequency"
        }
      ],
      "correctIndex": 2,
      "explanation": "Scanning tunes through a range of frequencies to check for activity. It does not find the antenna's resonant frequency. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "c0hcs91e0pcex"
    },
    {
      "id": "ot-ht-l05-t4b03",
      "shape": "mcq",
      "tags": [
        "operating",
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is squelch adjusted so that a weak FM signal can be heard?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Set the squelch threshold so that receiver output audio is on all the time"
        },
        {
          "modality": "text",
          "value": "Turn up the audio level until it overcomes the squelch threshold"
        },
        {
          "modality": "text",
          "value": "Turn on the anti-squelch function"
        },
        {
          "modality": "text",
          "value": "Enable squelch enhancement"
        }
      ],
      "correctIndex": 0,
      "explanation": "For a weak frequency modulated (FM) signal, the squelch threshold is set so receiver audio is on all the time. Raising the audio level is not the method.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "hu8qcn1pp1a53"
    },
    {
      "id": "ot-ht-l05-t4b04",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does an FM signal sound like when received slightly off frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The audio increases in pitch"
        },
        {
          "modality": "text",
          "value": "The audio decrease in pitch"
        },
        {
          "modality": "text",
          "value": "There is no effect except for reduction in amplitude"
        },
        {
          "modality": "text",
          "value": "The audio becomes distorted"
        }
      ],
      "correctIndex": 3,
      "explanation": "A frequency modulated (FM) signal received slightly off frequency sounds distorted, not simply higher or lower in pitch.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jzn9zi1iduqf2"
    },
    {
      "id": "ot-ht-l05-t4b06",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following controls could be used if the voice pitch of a single-sideband signal returning to your CQ call seems too high or low?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The AGC or limiter"
        },
        {
          "modality": "text",
          "value": "The bandwidth selection"
        },
        {
          "modality": "text",
          "value": "The tone squelch"
        },
        {
          "modality": "text",
          "value": "The RIT or Clarifier"
        }
      ],
      "correctIndex": 3,
      "explanation": "The receiver incremental tuning (RIT) or clarifier corrects the pitch of a single sideband (SSB) voice that seems too high or low. Automatic gain control (AGC), bandwidth selection and tone squelch do not. CQ means calling any station.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "120c5a11dogu73"
    },
    {
      "id": "ot-ht-l05-t4b10",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following receiver filter bandwidths provides the best signal-to-noise ratio for SSB reception?"
      },
      "options": [
        {
          "modality": "text",
          "value": "500 Hz"
        },
        {
          "modality": "text",
          "value": "1000 Hz"
        },
        {
          "modality": "text",
          "value": "2400 Hz"
        },
        {
          "modality": "text",
          "value": "5000 Hz"
        }
      ],
      "correctIndex": 2,
      "explanation": "For single sideband (SSB), a 2400 Hz receiver filter bandwidth gives the best signal-to-noise ratio. 500, 1000 and 5000 Hz are not the best.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "sd21i6bdeoma"
    },
    {
      "id": "ot-ht-l05-t4b01",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the effect of excessive microphone gain on SSB transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Frequency instability"
        },
        {
          "modality": "text",
          "value": "Distorted transmitted audio"
        },
        {
          "modality": "text",
          "value": "Increased SWR"
        },
        {
          "modality": "text",
          "value": "Sideband inversion"
        }
      ],
      "correctIndex": 1,
      "explanation": "Excessive microphone gain distorts the transmitted audio. It does not cause frequency instability, increased standing wave ratio (SWR) or sideband inversion. SSB stands for single sideband.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "xgj2u1s68l0b"
    },
    {
      "id": "ot-ht-l05-t4b08",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the advantage of having a choice of receiver filter bandwidths in a multimode transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Permits monitoring several modes at once by selecting a separate filter for each mode"
        },
        {
          "modality": "text",
          "value": "Permits noise or interference reduction by selecting a bandwidth matching the mode"
        },
        {
          "modality": "text",
          "value": "Increases the number of frequencies that can be stored in memory"
        },
        {
          "modality": "text",
          "value": "Increases the amount of offset between receive and transmit frequencies"
        }
      ],
      "correctIndex": 1,
      "explanation": "Choosing a receiver filter bandwidth matching the mode reduces noise or interference. It does not store more frequencies or monitor several modes at once.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "wfsyo915m7r8b"
    },
    {
      "id": "ot-ht-l05-t4b07",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a DMR “code plug”?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An adapter cable used to connect a DMR radio to a computer for internet access"
        },
        {
          "modality": "text",
          "value": "Configuration data loaded onto your radio to access repeaters and talkgroups"
        },
        {
          "modality": "text",
          "value": "A manufacturer's DMR programming software upgrade to support new radio models"
        },
        {
          "modality": "text",
          "value": "A Coder-Decoder (CODEC) that converts analog voice data to DMR digital data and vice versa"
        }
      ],
      "correctIndex": 1,
      "explanation": "A Digital Mobile Radio (DMR) code plug is configuration data loaded onto the radio to access repeaters and talkgroups. It is not a cable, upgrade or CODEC.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "nzl8ynecaskj"
    },
    {
      "id": "ot-ht-l05-t4b09",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is a specific group of stations selected on a DMR digital voice transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By retrieving the frequencies from transceiver memory"
        },
        {
          "modality": "text",
          "value": "By enabling the group’s CTCSS tone"
        },
        {
          "modality": "text",
          "value": "By entering the group’s identification code"
        },
        {
          "modality": "text",
          "value": "By inserting a five-pin, pre-programmed code plug"
        }
      ],
      "correctIndex": 2,
      "explanation": "A group of stations is selected on a Digital Mobile Radio (DMR) transceiver by entering the group's identification code, not by memory frequencies or a Continuous Tone-Coded Squelch System (CTCSS) tone.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "17p197y1g1m7r6"
    },
    {
      "id": "ot-ht-l05-t4b11",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following must be programmed into a D-STAR digital transceiver before transmitting?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Your call sign"
        },
        {
          "modality": "text",
          "value": "Your output power"
        },
        {
          "modality": "text",
          "value": "The codec type being used"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "A Digital Smart Technologies for Amateur Radio (D-STAR) transceiver needs the operator's call sign programmed before transmitting. Output power and codec type are not what must be programmed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "i93hni1r77g9u"
    },
    {
      "id": "ht-l06-f-current-unit",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Current is measured in amperes",
      "body": "Electrical **current** is measured in amperes. The ampere goes with current, the volt with voltage and the watt with power.",
      "uid": "60hq9hxn0yxz"
    },
    {
      "id": "ht-l06-f-power-unit",
      "shape": "fact",
      "tags": [
        "power",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Power is measured in watts",
      "body": "Electrical power is measured in **watts**.",
      "uid": "ouotmc1abe860"
    },
    {
      "id": "ht-l06-f-current-term",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Current: the flow of electrons",
      "body": "The flow of electrons in an electric circuit is called **current**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple closed loop circuit. On the left, draw a battery in standard schematic form: a long thin plate marked + and a short thick plate marked -. On the right, draw a resistor as a standard zigzag. Two wires connect them into one loop. Place small dots for electrons along the wires, with arrows showing them moving around the loop from the battery's - terminal, through the resistor and back to the + terminal. Put a bracket across the battery terminals to mark the voltage difference. Put a caption on the wire marking the moving electrons as current.",
        "imageSearchTerm": "Current is the flow of electrons",
        "alt": "Current is the flow of electrons. Current is electrons flowing around a circuit, and a voltage difference makes them flow.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-current-term.0f9d2f9e.webp"
      },
      "uid": "m0t11p262rlf"
    },
    {
      "id": "ht-l06-f-frequency-term",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Frequency counts cycles per second",
      "body": "**Frequency** is the number of times per second that an alternating current makes a complete cycle. Each full back-and-forth swing of the current is one cycle.",
      "uid": "10u2gwhkrqc33"
    },
    {
      "id": "ht-l06-f-voltage-cause",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Three rows, one per quantity. Each row gives the quantity's name, what it is, and its unit. Current is the flow of electrons, measured in amperes. Voltage is the difference that causes the flow, measured in volts. Power is the rate at which electrical energy is used, measured in watts.",
        "imageSearchTerm": "Current, voltage and power, each with its unit",
        "alt": "Current is the flow of electrons, in amperes; voltage is the difference that causes the flow, in volts; power is the rate electrical energy is used, in watts.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-voltage-cause.9f5acaba.webp"
      },
      "title": "Voltage difference moves electrons",
      "body": "A difference in **voltage** causes electron flow. Voltage is counted in volts.",
      "uid": "1657uzm17nwiqa"
    },
    {
      "id": "ht-l06-f-hertz-unit",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Hertz is the unit of frequency",
      "body": "The **hertz** is the unit of frequency. Frequency is the number of times per second that an alternating current makes a complete cycle.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A sine wave of an alternating current along a time axis. A bracket above the axis spans a window labeled 'One second' that holds several complete cycles. Below the wave, a bracket marks a single complete cycle, from one zero crossing going upward to the next zero crossing going upward, and labels it. A caption box beside the window states that frequency is the number of complete cycles per second, and that its unit is the hertz.",
        "imageSearchTerm": "Frequency: complete cycles in one second",
        "alt": "Frequency: complete cycles in one second: what one complete cycle is, and that frequency counts how many complete cycles happen each second, measured in hertz.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-hertz-unit.d6a1131c.webp"
      },
      "uid": "hbz4lgseczz6"
    },
    {
      "id": "ht-l06-f-metal-conductors",
      "shape": "fact",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why metals conduct well",
      "body": "Metals are generally good **conductors** of electricity because they have many free electrons.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. Left panel: a metal bar drawn as a block holding many small loose electron dots scattered between evenly spaced atom circles. A wide current arrow passes through the bar from left to right. Right panel: a plain glass block of the same size, drawn as a pale translucent block. A current arrow reaches its left face and stops there, with no arrow on the far side. Each panel has a caption beneath it.",
        "imageSearchTerm": "Metal conducts, glass insulates",
        "alt": "Metal conducts, glass insulates: a metal conductor, whose many free electrons let current through, beside a glass insulator.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-metal-conductors.f16901ee.webp"
      },
      "uid": "17skljs10khj32"
    },
    {
      "id": "ht-l06-f-glass-insulator",
      "shape": "fact",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Glass is a good insulator",
      "body": "Glass is a good electrical **insulator**. A piece of glass suits the job of keeping current out.",
      "illustration": {
        "imagePrompt": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "imageSearchTerm": "glass insulator",
        "alt": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Bill \"Hemingray\" Meier at English Wikipedia · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Hemingray42.jpg",
        "subject": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-glass-insulator.44f77ac0.webp"
      },
      "uid": "1wnvwm51z08p6j"
    },
    {
      "id": "ht-l06-f-glass-insulator-hero",
      "shape": "fact",
      "title": "Glass keeps current out",
      "body": "Glass is a good electrical insulator, so a piece of glass suits the job of keeping current out.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "electrical-principles"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "imageSearchTerm": "glass insulator",
        "alt": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Bill \"Hemingray\" Meier at English Wikipedia · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Hemingray42.jpg",
        "subject": "A blue-green glass pin insulator, a Hemingray-42, of the kind used on utility poles.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-glass-insulator.44f77ac0.webp"
      },
      "uid": "1rss7tb1vfamkb"
    },
    {
      "id": "ht-l06-f-alternating-current",
      "shape": "fact",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What alternating current does",
      "body": "In **alternating current (AC)**, the current alternates between positive and negative directions.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A graph of current against time. A horizontal zero line runs across the middle, and time runs left to right. A smooth sine wave rises above the zero line, falls back through it, dips below it and returns, repeating for about three swings. Shade every part above the line in one tone and label it the positive direction. Shade every part below the line in a second tone and label it the negative direction. Above the graph, draw a small wire with a current arrow pointing right. Below the graph, draw the same wire with the arrow pointing left. These show the flow reversing direction.",
        "imageSearchTerm": "Alternating current swings both ways",
        "alt": "Alternating current swings both ways. Alternating current goes in both a positive and a negative direction. It does not swing only between one direction and zero.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-alternating-current.d02b3dfd.webp"
      },
      "uid": "k1ssttvzgstt"
    },
    {
      "id": "ht-l06-f-power-term",
      "shape": "fact",
      "tags": [
        "power",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Power: the rate of energy use",
      "body": "**Power** is the rate at which electrical energy is used. Its unit is the watt.",
      "uid": "xh3nks1rxz3mo"
    },
    {
      "id": "ht-l06-f-resistance-all",
      "shape": "fact",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Resistance opposes every current",
      "body": "**Resistance** opposes direct current, alternating current (AC) and radio frequency (RF) current alike. It is the opposition that current meets while it flows, whatever form the current takes.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Three horizontal rows stacked one above another. Each row has a small waveform icon on the left, then a wire with a current arrow running into a standard zigzag resistor symbol, then a thinner arrow leaving the resistor on the right. The waveform icons are: top row, a flat straight line for direct current; middle row, a slow sine wave for alternating current; bottom row, a much faster, tightly packed sine wave for radio frequency current. A tall brace on the right groups all three resistors under one caption.",
        "imageSearchTerm": "Resistance opposes every kind of current",
        "alt": "Resistance opposes every kind of current. Direct current, alternating current and radio frequency current all meet the same opposition from a resistor.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-resistance-all.d25690dc.webp"
      },
      "uid": "xdb2bw1uzv4d4"
    },
    {
      "id": "ht-l06-q-label-current",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "On a power supply label, which quantity does the ampere rating give?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Electrical voltage"
        },
        {
          "modality": "text",
          "value": "Electrical resistance"
        },
        {
          "modality": "text",
          "value": "Electrical current"
        },
        {
          "modality": "text",
          "value": "Electrical power"
        }
      ],
      "correctIndex": 2,
      "explanation": "The ampere is the unit of current. Power goes with the watt rating and voltage with the volt rating, so the ampere rating is never a power or voltage figure.",
      "uid": "1qppgnowrhd0"
    },
    {
      "id": "ht-l06-q-keep-current-out",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which item suits the job of keeping electrical current out?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A long rod of graphite"
        },
        {
          "modality": "text",
          "value": "A strip of stainless steel"
        },
        {
          "modality": "text",
          "value": "A tank of sea water"
        },
        {
          "modality": "text",
          "value": "A thick sheet of glass"
        }
      ],
      "correctIndex": 3,
      "explanation": "Glass is a good electrical insulator. Graphite, stainless steel and sea water are not good insulators, so they would not keep current out.",
      "uid": "16oouo51k77ic7"
    },
    {
      "id": "ht-l06-q-quantity-unit",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which quantity is paired with its correct unit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Current measured in watts"
        },
        {
          "modality": "text",
          "value": "Frequency measured in hertz"
        },
        {
          "modality": "text",
          "value": "Power measured in amperes"
        },
        {
          "modality": "text",
          "value": "Voltage measured in ohms"
        }
      ],
      "correctIndex": 1,
      "explanation": "Frequency is measured in hertz. Current uses amperes, power uses watts and voltage uses volts, so the other pairings mix up the units.",
      "uid": "1lwzty71i12et5"
    },
    {
      "id": "ht-l06-q-energy-rate",
      "shape": "mcq",
      "tags": [
        "power",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants the term for how quickly a radio uses electrical energy. Which is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Electrical power"
        },
        {
          "modality": "text",
          "value": "Electrical current"
        },
        {
          "modality": "text",
          "value": "Electrical voltage"
        },
        {
          "modality": "text",
          "value": "Electrical resistance"
        }
      ],
      "correctIndex": 0,
      "explanation": "Power is the rate at which electrical energy is used, measured in watts. Current is electron flow, and voltage and resistance are different quantities.",
      "uid": "1ltczzq1wb2rmy"
    },
    {
      "id": "ht-l06-tf-resistance-all",
      "shape": "trueFalse",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Resistance opposes direct current, alternating current and radio frequency (RF) current alike.",
      "isTrue": true,
      "why": "Resistance is the opposition current meets while it flows, whatever form the current takes.",
      "uid": "188wvw6ldb086"
    },
    {
      "id": "ht-l06-tf-capacitance-flow",
      "shape": "trueFalse",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A difference in capacitance is what causes electrons to flow in a circuit.",
      "isTrue": false,
      "why": "A difference in voltage causes electron flow. Capacitance, inductance and ampere-hours do not.",
      "uid": "1cgo5vrklwu0t"
    },
    {
      "id": "ht-l06-c-free-electrons",
      "shape": "cloze",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Metals conduct electricity well because they have many free ___.",
      "answer": "electrons",
      "distractors": [
        "protons",
        "ions",
        "neutrons"
      ],
      "explanation": "Free electrons can move through a metal and carry current. Free protons are not the reason metals conduct.",
      "uid": "1u5s6no11pi5pq"
    },
    {
      "id": "ht-l06-p-frequency-unit",
      "shape": "pair",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Unit of frequency"
      },
      "sideB": {
        "modality": "text",
        "value": "Hertz"
      },
      "uid": "17a58g06dhmzs"
    },
    {
      "id": "ht-l06-f-milliamps-amps",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Amperes to milliamperes",
      "body": "1.5 amperes is 1500 milliamperes. Going from amperes to the **milli** form multiplies the number by 1000.",
      "uid": "1r3s6ed6e0hyp"
    },
    {
      "id": "ht-l06-f-1500-khz",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Hertz to kilohertz",
      "body": "1,500,000 hertz is 1500 kilohertz (kHz). A **kilohertz** is 1000 hertz.",
      "uid": "ok5s40n5egza"
    },
    {
      "id": "ht-l06-f-kilovolt",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a kilovolt equals",
      "body": "Kilo means one thousand, so one **kilovolt** is one thousand volts.",
      "uid": "37pcnpnhlgwb"
    },
    {
      "id": "ht-l06-f-microvolt",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a microvolt equals",
      "body": "Micro means one-millionth, so one **microvolt** is one one-millionth of a volt.",
      "uid": "78gitrqwg5ez"
    },
    {
      "id": "ht-l06-f-milliwatts",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Milliwatts to watts",
      "body": "Milli means one-thousandth. So 500 **milliwatts** is 0.5 watts, and going back from the milli form to watts divides the number by 1000.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Left: a rounded box holding 500 milliwatts. Right: a rounded box holding 0.5 watts. A thick arrow between them is marked Divide by 1000. Under the arrow, the number 500 is written large with a gold decimal point after its last digit; three small curved gold hop arrows carry the decimal point three digit places to the left, so it lands in front of the 5. A caption gives the meaning of milli.",
        "imageSearchTerm": "From milliwatts to watts",
        "alt": "500 milliwatts becomes 0.5 watts by dividing by 1000, the decimal point hopping three places to the left: milli means one-thousandth.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-milliwatts.dae0d01e.webp"
      },
      "uid": "tde0o91n5msgl"
    },
    {
      "id": "ht-l06-f-3000-milliamps",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Milliamperes to amperes",
      "body": "3000 milliamperes is 3 amperes. Dividing by 1000 gives the **amperes** value.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, one long bar labeled 3000 milliamperes. An arrow marked Divide by 1000 points right to the same bar split into three equal blocks; a bracket under one block carries the label Each block: 1000 milliamperes = 1 ampere. On the far right, the result, 3 amperes.",
        "imageSearchTerm": "From milliamperes to amperes",
        "alt": "A 3000-milliampere bar split into three blocks of 1000 milliamperes, each 1 ampere: dividing by 1000 gives 3 amperes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-3000-milliamps.a45f6a51.webp"
      },
      "uid": "1frgut6hozh0i"
    },
    {
      "id": "ht-l06-f-megahertz-khz",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal sequence of four units, from hertz to kilohertz to megahertz to gigahertz, with each step marked as one thousand of the smaller unit. Below the sequence are three worked examples, each showing one value and its equal in a different unit.",
        "imageSearchTerm": "Each frequency unit is a thousand of the one below",
        "alt": "Each frequency unit is a thousand of the one below: hertz, kilohertz, megahertz and gigahertz, with three worked conversions such as 3.525 megahertz = 3525 kilohertz.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-megahertz-khz.08afbe29.webp"
      },
      "title": "Megahertz to kilohertz",
      "body": "3.525 megahertz (MHz) is 3525 kilohertz (kHz). A **megahertz** is 1000 kilohertz.",
      "uid": "10y2aek1gvik1a"
    },
    {
      "id": "ht-l06-f-picofarad",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Four rows, one per prefix. Each row gives the prefix, its meaning, and one example pair of equal values. Milli means one-thousandth, with 1.5 amperes equal to 1500 milliamperes. Kilo means one thousand, with one kilovolt equal to one thousand volts. Micro means one-millionth, with one microvolt equal to one one-millionth of a volt. Pico is shown with 1,000,000 picofarads equal to 1 microfarad.",
        "imageSearchTerm": "Metric prefixes: milli, kilo, micro and pico",
        "alt": "Metric prefixes milli, kilo, micro and pico, each with its meaning and one worked conversion, such as 1,000,000 picofarads = 1 microfarad.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-picofarad.479457d1.webp"
      },
      "title": "Picofarads to microfarads",
      "body": "1,000,000 picofarads equals 1 microfarad. So a **picofarad** is one-millionth of a microfarad.",
      "uid": "1mk0gs41e2npde"
    },
    {
      "id": "ht-l06-f-db-doubling",
      "shape": "fact",
      "tags": [
        "math",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Doubling power is about 3 dB",
      "body": "A power increase from 5 watts to 10 watts, a doubling, is most closely 3 dB. The **decibel** (dB) describes a change in power.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two vertical bars on one baseline, drawn to scale: a 5-watt bar on the left and a 10-watt bar on the right, exactly twice its height. A curved arrow rises from the top of the first bar to the top of the second, marked Double the power. A large rounded badge beside the taller bar shows the decibel value.",
        "imageSearchTerm": "Doubling the power adds about 3 decibels",
        "alt": "A 5-watt bar beside a 10-watt bar twice its height: doubling the power is about +3 decibels (dB).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-db-doubling.c9f924f2.webp"
      },
      "uid": "1nuuusb1gkk2o7"
    },
    {
      "id": "ht-l06-f-db-quarter",
      "shape": "fact",
      "tags": [
        "math",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A drop to one quarter is -6 dB",
      "body": "A power decrease from 12 watts to 3 watts, a drop to one quarter, is most closely -6 decibels (dB). A fall in power shows as a **negative** decibel value.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two vertical bars on one baseline, drawn to scale: a 12-watt bar on the left and a 3-watt bar on the right, exactly one quarter of its height. A curved arrow falls from the top of the first bar to the top of the second, marked One quarter of the power. A large rounded badge beside the short bar shows the decibel value. A caption under the bars says a fall in power gives a negative value.",
        "imageSearchTerm": "A drop to one quarter is about -6 decibels",
        "alt": "A 12-watt bar beside a 3-watt bar one quarter its height: a drop to one quarter of the power is about -6 decibels (dB), a negative value.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-db-quarter.e45849b6.webp"
      },
      "uid": "965pmaz91fq6"
    },
    {
      "id": "ht-l06-f-db-tenfold",
      "shape": "fact",
      "tags": [
        "math",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ten times the power is 10 dB",
      "body": "A power increase from 20 watts to 200 watts, ten times as much, is 10 decibels (dB). A rise in power shows as a **positive** decibel value.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Three pairs of vertical bars, side by side, each pair showing a power before and after. Bar heights are drawn to scale within each pair. Pair 1: a 5-watt bar beside a 10-watt bar twice its height, with an upward arrow marked about +3 dB. Pair 2: a 12-watt bar beside a 3-watt bar one quarter its height, with a downward arrow marked about -6 dB. Pair 3: a 20-watt bar beside a 200-watt bar ten times its height, with an upward arrow marked +10 dB. A footer note states that a rise in power gives a positive dB value and a fall gives a negative one.",
        "imageSearchTerm": "Power changes in decibels (dB)",
        "alt": "Power changes in decibels (dB): double the power is +3 dB, one quarter is -6 dB, and ten times is +10 dB.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-db-tenfold.05e846ec.webp"
      },
      "uid": "1puu8ob1dyms8p"
    },
    {
      "id": "ht-l06-f-28-4-mhz",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "28400 kilohertz in megahertz",
      "body": "28400 kilohertz (kHz) is 28.400 megahertz (MHz). A **megahertz** is 1000 kilohertz, so moving to the larger unit divides the number by 1000.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two frequency readouts, each a rounded rectangle like a radio's display, with a light screen and an ink outline. The left readout shows 28400 kilohertz (kHz); the right readout shows 28.400 megahertz (MHz). A thick arrow between them carries the label Larger unit: divide by 1000. Under the left readout, three small gold hop arrows carry the decimal point three places to the left, from after the last 0 to between 28 and 400. A small note gives 1 MHz = 1000 kHz.",
        "imageSearchTerm": "From kilohertz to megahertz",
        "alt": "A readout of 28400 kilohertz (kHz) becoming 28.400 megahertz (MHz), the decimal point moving three places left: 1 MHz is 1000 kHz, so divide by 1000.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l06-f-28-4-mhz.5499fdfc.webp"
      },
      "uid": "1xwxi2xswnzpt"
    },
    {
      "id": "ht-l06-f-gigahertz",
      "shape": "fact",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Megahertz to gigahertz",
      "body": "2425 megahertz (MHz) is 2.425 gigahertz (GHz). A **gigahertz** is 1000 megahertz.",
      "uid": "ligphfru7h31"
    },
    {
      "id": "ht-l06-q-milliamps-to-amps",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A circuit draws 1500 milliamperes. How many amperes is that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "15 amperes"
        },
        {
          "modality": "text",
          "value": "1.5 amperes"
        },
        {
          "modality": "text",
          "value": "0.15 amperes"
        },
        {
          "modality": "text",
          "value": "0.0015 amperes"
        }
      ],
      "correctIndex": 1,
      "explanation": "Dividing by 1000 turns milliamperes into amperes, so 1500 milliamperes is 1.5 amperes. The other values misplace the decimal.",
      "uid": "1do39mw1x5jit0"
    },
    {
      "id": "ht-l06-q-picofarads-in-micro",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A capacitor is marked 1 microfarad. How many picofarads is that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1000 picofarads"
        },
        {
          "modality": "text",
          "value": "100 picofarads"
        },
        {
          "modality": "text",
          "value": "1,000,000,000 picofarads"
        },
        {
          "modality": "text",
          "value": "1,000,000 picofarads"
        }
      ],
      "correctIndex": 3,
      "explanation": "A picofarad is one-millionth of a microfarad, so 1 microfarad is 1,000,000 picofarads. A thousand picofarads would be far too few.",
      "uid": "opflbm1j7f6r6"
    },
    {
      "id": "ht-l06-q-one-thousandth-prefix",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which metric prefix means one-thousandth of a unit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Micro"
        },
        {
          "modality": "text",
          "value": "Kilo"
        },
        {
          "modality": "text",
          "value": "Milli"
        },
        {
          "modality": "text",
          "value": "Pico"
        }
      ],
      "correctIndex": 2,
      "explanation": "Milli means one-thousandth, as in 500 milliwatts being 0.5 watts. Kilo means one thousand, and micro and pico are far smaller.",
      "uid": "cbbk9c16rxfow"
    },
    {
      "id": "ht-l06-q-larger-unit-number",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee restates a frequency from kilohertz (kHz) in megahertz (MHz). What happens to the number?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Smaller by a factor of 1000"
        },
        {
          "modality": "text",
          "value": "Larger by a factor of 1000"
        },
        {
          "modality": "text",
          "value": "Smaller by a factor of 100"
        },
        {
          "modality": "text",
          "value": "Larger by a factor of 100"
        }
      ],
      "correctIndex": 0,
      "explanation": "Each megahertz holds 1000 kilohertz, so the number gets 1000 times smaller, as 28400 kHz becoming 28.400 MHz shows.",
      "uid": "hv6q0echmpkk"
    },
    {
      "id": "ht-l06-q-amplifier-doubles",
      "shape": "mcq",
      "tags": [
        "math",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "An amplifier doubles the power. About what decibel (dB) change is that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "About +2 dB"
        },
        {
          "modality": "text",
          "value": "About +6 dB"
        },
        {
          "modality": "text",
          "value": "About +3 dB"
        },
        {
          "modality": "text",
          "value": "About +10 dB"
        }
      ],
      "correctIndex": 2,
      "explanation": "Doubling power is a rise of about 3 dB. Ten times the power is 10 dB, and a fall in power would show as a negative value.",
      "uid": "19l9r68v9r1c"
    },
    {
      "id": "ht-l06-tf-quarter-negative",
      "shape": "trueFalse",
      "tags": [
        "math",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A power drop from 12 watts to 3 watts is most closely a change of -6 decibels (dB).",
      "isTrue": true,
      "why": "Power falling to one quarter shows as a negative decibel value, most closely -6 dB.",
      "uid": "h1dd09x45ipf"
    },
    {
      "id": "ht-l06-tf-larger-unit",
      "shape": "trueFalse",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Restating 2425 megahertz (MHz) in gigahertz (GHz) makes the number larger.",
      "isTrue": false,
      "why": "Each gigahertz holds 1000 megahertz, so 2425 MHz becomes the smaller number 2.425 GHz.",
      "uid": "4b8msy1cptfbg"
    },
    {
      "id": "ht-l06-tf-kilovolt-hundred",
      "shape": "trueFalse",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "One kilovolt equals one hundred volts.",
      "isTrue": false,
      "why": "Kilo means one thousand, so one kilovolt is one thousand volts.",
      "uid": "wx96n0fg1jna"
    },
    {
      "id": "ht-l06-c-picofarad-micro",
      "shape": "cloze",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "1,000,000 picofarads equals 1 ___.",
      "answer": "microfarad",
      "distractors": [
        "millifarad",
        "nanofarad",
        "kilofarad"
      ],
      "explanation": "A picofarad is one-millionth of a microfarad, so a million of them make one microfarad.",
      "uid": "x42zuc564b2c"
    },
    {
      "id": "ht-l06-p-microvolt",
      "shape": "pair",
      "tags": [
        "units",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "One microvolt"
      },
      "sideB": {
        "modality": "text",
        "value": "One one-millionth of a volt"
      },
      "uid": "1fpxpk71k0zjh3"
    },
    {
      "id": "ht-l06-tf-ac-zero",
      "shape": "trueFalse",
      "tags": [
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Current that alternates between a positive direction and zero is alternating current.",
      "isTrue": false,
      "why": "Alternating current alternates between positive and negative directions.",
      "uid": "1yfl7as16z5hck"
    },
    {
      "id": "ot-ht-l06-t5a01",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "Electrical current is measured in which of the following units?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Volts"
        },
        {
          "modality": "text",
          "value": "Watts"
        },
        {
          "modality": "text",
          "value": "Ohms"
        },
        {
          "modality": "text",
          "value": "Amperes"
        }
      ],
      "correctIndex": 3,
      "explanation": "Current is the flow of electrons and is measured in amperes. Volts, watts and ohms are units of other quantities.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "14pc2em1vwgy3c"
    },
    {
      "id": "ot-ht-l06-t5a02",
      "shape": "mcq",
      "tags": [
        "power",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "Electrical power is measured in which of the following units?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Volts"
        },
        {
          "modality": "text",
          "value": "Watts"
        },
        {
          "modality": "text",
          "value": "Watt-hours"
        },
        {
          "modality": "text",
          "value": "Amperes"
        }
      ],
      "correctIndex": 1,
      "explanation": "Power is measured in watts. Watt-hours, volts and amperes are not the unit of power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1av54o9fshkzj"
    },
    {
      "id": "ot-ht-l06-t5a06",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the unit of frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Hertz"
        },
        {
          "modality": "text",
          "value": "Henry"
        },
        {
          "modality": "text",
          "value": "Farad"
        },
        {
          "modality": "text",
          "value": "Epicycles per second"
        }
      ],
      "correctIndex": 0,
      "explanation": "Frequency is measured in hertz. Henry, farad and epicycles per second are not units of frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1flbn5k1o7f4us"
    },
    {
      "id": "ot-ht-l06-t5a03",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the term for the flow of electrons in an electric circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voltage"
        },
        {
          "modality": "text",
          "value": "Amperes per second"
        },
        {
          "modality": "text",
          "value": "Volts per second"
        },
        {
          "modality": "text",
          "value": "Current"
        }
      ],
      "correctIndex": 3,
      "explanation": "The flow of electrons in a circuit is called current. Voltage is the difference that causes the flow.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "vknmaryhghrh"
    },
    {
      "id": "ot-ht-l06-t5a05",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "A difference in which of the following causes electron flow?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voltage"
        },
        {
          "modality": "text",
          "value": "Ampere-hours"
        },
        {
          "modality": "text",
          "value": "Capacitance"
        },
        {
          "modality": "text",
          "value": "Inductance"
        }
      ],
      "correctIndex": 0,
      "explanation": "A difference in voltage makes electrons move. Ampere-hours, capacitance and inductance do not cause the flow.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jbm5ty50k80o"
    },
    {
      "id": "ot-ht-l06-t5a10",
      "shape": "mcq",
      "tags": [
        "power",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which term describes the rate at which electrical energy is used?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistance"
        },
        {
          "modality": "text",
          "value": "Current"
        },
        {
          "modality": "text",
          "value": "Power"
        },
        {
          "modality": "text",
          "value": "Voltage"
        }
      ],
      "correctIndex": 2,
      "explanation": "Power is the rate at which electrical energy is used. Resistance, current and voltage are different quantities.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "r0gz0lu2exqz"
    },
    {
      "id": "ot-ht-l06-t5a07",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why are metals generally good conductors of electricity?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They have relatively high density"
        },
        {
          "modality": "text",
          "value": "They have many free electrons"
        },
        {
          "modality": "text",
          "value": "They have many free protons"
        },
        {
          "modality": "text",
          "value": "They have relatively high Young’s modulus values"
        }
      ],
      "correctIndex": 1,
      "explanation": "Metals have many free electrons, which carry current easily. Density, Young's modulus and free protons are not the reason.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "r5rorr1vbxvtr"
    },
    {
      "id": "ot-ht-l06-t5a08",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a good electrical insulator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Sea water"
        },
        {
          "modality": "text",
          "value": "Glass"
        },
        {
          "modality": "text",
          "value": "Stainless steel"
        },
        {
          "modality": "text",
          "value": "Graphite"
        }
      ],
      "correctIndex": 1,
      "explanation": "Glass is a good electrical insulator. Sea water, stainless steel and graphite are not good insulators.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "cuipl61odmda"
    },
    {
      "id": "ot-ht-l06-t5a04",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "units"
      ],
      "prompt": {
        "modality": "text",
        "value": "What term describes the number of times per second that an alternating current makes a complete cycle?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Pulse rate"
        },
        {
          "modality": "text",
          "value": "Wave number"
        },
        {
          "modality": "text",
          "value": "Frequency"
        },
        {
          "modality": "text",
          "value": "Wavelength"
        }
      ],
      "correctIndex": 2,
      "explanation": "Frequency is the number of complete cycles per second of an alternating current. Wavelength and the others are not that term.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "11jrqze1v7a90k"
    },
    {
      "id": "ot-ht-l06-t5a09",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following describes alternating current?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Current that alternates between a positive direction and zero"
        },
        {
          "modality": "text",
          "value": "Current that alternates between a negative direction and zero"
        },
        {
          "modality": "text",
          "value": "Current that alternates between positive and negative directions"
        },
        {
          "modality": "text",
          "value": "All these answers are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Alternating current swings between positive and negative directions. Swinging between one direction and zero is not alternating current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "xc90h61h7r2yk"
    },
    {
      "id": "ot-ht-l06-t5a11",
      "shape": "mcq",
      "tags": [
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of current flow is opposed by resistance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Direct current"
        },
        {
          "modality": "text",
          "value": "Alternating current"
        },
        {
          "modality": "text",
          "value": "RF current"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Resistance opposes direct current, alternating current and radio frequency (RF) current alike, so each choice is correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8n45fhkso6rl"
    },
    {
      "id": "ot-ht-l06-t5b01",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "How many milliamperes is 1.5 amperes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.0000015 milliamperes"
        },
        {
          "modality": "text",
          "value": "0.0015 milliamperes"
        },
        {
          "modality": "text",
          "value": "1500 milliamperes"
        },
        {
          "modality": "text",
          "value": "1,500,000 milliamperes"
        }
      ],
      "correctIndex": 2,
      "explanation": "Going from amperes to milliamperes multiplies by 1000, so 1.5 amperes is 1500 milliamperes.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "72pz831ksdub7"
    },
    {
      "id": "ot-ht-l06-t5b05",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 500 milliwatts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "5 watts"
        },
        {
          "modality": "text",
          "value": "0.5 watts"
        },
        {
          "modality": "text",
          "value": "500,000 watts"
        },
        {
          "modality": "text",
          "value": "500,000,000 watts"
        }
      ],
      "correctIndex": 1,
      "explanation": "Milli means one-thousandth, so 500 milliwatts divided by 1000 is 0.5 watts.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8xgdfb1sb3zif"
    },
    {
      "id": "ot-ht-l06-t5b06",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 3000 milliamperes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.003 amperes"
        },
        {
          "modality": "text",
          "value": "0.3 amperes"
        },
        {
          "modality": "text",
          "value": "3,000,000 amperes"
        },
        {
          "modality": "text",
          "value": "3 amperes"
        }
      ],
      "correctIndex": 3,
      "explanation": "Dividing milliamperes by 1000 gives amperes, so 3000 milliamperes is 3 amperes.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1g3duo7155zhw1"
    },
    {
      "id": "ot-ht-l06-t5b03",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to one kilovolt?"
      },
      "options": [
        {
          "modality": "text",
          "value": "One one-thousandth of a volt"
        },
        {
          "modality": "text",
          "value": "One hundred volts"
        },
        {
          "modality": "text",
          "value": "One thousand volts"
        },
        {
          "modality": "text",
          "value": "One million volts"
        }
      ],
      "correctIndex": 2,
      "explanation": "Kilo means one thousand, so a kilovolt is one thousand volts, not one hundred or one million.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1sjjiwl18qkwap"
    },
    {
      "id": "ot-ht-l06-t5b04",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to one microvolt?"
      },
      "options": [
        {
          "modality": "text",
          "value": "One one-millionth of a volt"
        },
        {
          "modality": "text",
          "value": "One million volts"
        },
        {
          "modality": "text",
          "value": "One thousand kilovolts"
        },
        {
          "modality": "text",
          "value": "One one-thousandth of a volt"
        }
      ],
      "correctIndex": 0,
      "explanation": "Micro means one-millionth, so a microvolt is one one-millionth of a volt.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1i7e2591w1balz"
    },
    {
      "id": "ot-ht-l06-t5b08",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 1,000,000 picofarads?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.001 microfarads"
        },
        {
          "modality": "text",
          "value": "1 microfarad"
        },
        {
          "modality": "text",
          "value": "1000 microfarads"
        },
        {
          "modality": "text",
          "value": "1,000,000,000 microfarads"
        }
      ],
      "correctIndex": 1,
      "explanation": "A picofarad is one-millionth of a microfarad, so 1,000,000 picofarads make 1 microfarad.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1n9wo0e4okd6e"
    },
    {
      "id": "ot-ht-l06-t5b02",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 1,500,000 hertz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1500 kHz"
        },
        {
          "modality": "text",
          "value": "1500 MHz"
        },
        {
          "modality": "text",
          "value": "15 GHz"
        },
        {
          "modality": "text",
          "value": "150 kHz"
        }
      ],
      "correctIndex": 0,
      "explanation": "A kilohertz is 1000 hertz, so 1,500,000 hertz is 1500 kHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1j6xd1o1y1y9oc"
    },
    {
      "id": "ot-ht-l06-t5b07",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 3.525 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.003525 kHz"
        },
        {
          "modality": "text",
          "value": "35.25 kHz"
        },
        {
          "modality": "text",
          "value": "3525 kHz"
        },
        {
          "modality": "text",
          "value": "3,525,000 kHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "A megahertz is 1000 kilohertz, so 3.525 MHz is 3525 kHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ok8op7161wty1"
    },
    {
      "id": "ot-ht-l06-t5b12",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 28400 kHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "28.400 kHz"
        },
        {
          "modality": "text",
          "value": "2.800 MHz"
        },
        {
          "modality": "text",
          "value": "284.00 MHz"
        },
        {
          "modality": "text",
          "value": "28.400 MHz"
        }
      ],
      "correctIndex": 3,
      "explanation": "Moving to the larger unit divides by 1000, so 28400 kHz is 28.400 MHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "e8kpp1tte729"
    },
    {
      "id": "ot-ht-l06-t5b13",
      "shape": "mcq",
      "tags": [
        "units",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is equal to 2425 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.002425 GHz"
        },
        {
          "modality": "text",
          "value": "24.25 GHz"
        },
        {
          "modality": "text",
          "value": "2.425 GHz"
        },
        {
          "modality": "text",
          "value": "242.5 GHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "A gigahertz is 1000 megahertz, so 2425 MHz is 2.425 GHz.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qul2olf9x7sz"
    },
    {
      "id": "ot-ht-l06-t5b09",
      "shape": "mcq",
      "tags": [
        "math",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which decibel value most closely represents a power increase from 5 watts to 10 watts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "2 dB"
        },
        {
          "modality": "text",
          "value": "3 dB"
        },
        {
          "modality": "text",
          "value": "5 dB"
        },
        {
          "modality": "text",
          "value": "10 dB"
        }
      ],
      "correctIndex": 1,
      "explanation": "Doubling power from 5 watts to 10 watts is a rise of about 3 dB.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "3zjl2vmisfpv"
    },
    {
      "id": "ot-ht-l06-t5b10",
      "shape": "mcq",
      "tags": [
        "math",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which decibel value most closely represents a power decrease from 12 watts to 3 watts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "-1 dB"
        },
        {
          "modality": "text",
          "value": "-3 dB"
        },
        {
          "modality": "text",
          "value": "-6 dB"
        },
        {
          "modality": "text",
          "value": "-9 dB"
        }
      ],
      "correctIndex": 2,
      "explanation": "Power falling to one quarter, from 12 watts to 3 watts, is a negative value, most closely -6 dB.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "q8lu1u1s11joo"
    },
    {
      "id": "ot-ht-l06-t5b11",
      "shape": "mcq",
      "tags": [
        "math",
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which decibel value represents a power increase from 20 watts to 200 watts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "10 dB"
        },
        {
          "modality": "text",
          "value": "12 dB"
        },
        {
          "modality": "text",
          "value": "18 dB"
        },
        {
          "modality": "text",
          "value": "28 dB"
        }
      ],
      "correctIndex": 0,
      "explanation": "Ten times the power, from 20 watts to 200 watts, is 10 dB.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1xvy19inoolfq"
    },
    {
      "id": "ht-l07-f-capacitance",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Capacitance Stores Electric-Field Energy",
      "body": "**Capacitance** describes the ability to store energy in an electric field. Pairing each property with its field helps: electric field goes with capacitance.",
      "uid": "11z9gar7bju4d"
    },
    {
      "id": "ht-l07-f-farad",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Farad Measures Capacitance",
      "body": "The unit of capacitance is the **farad**.",
      "uid": "179w03j1np7evp"
    },
    {
      "id": "ht-l07-f-inductance",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A three-row chart. Each row gives one property, what it describes, and its unit. Capacitance and inductance are paired with their own field, and impedance with opposition to alternating current (AC) flow.",
        "imageSearchTerm": "Capacitance, Inductance and Impedance",
        "alt": "Capacitance, inductance and impedance: energy stored in an electric field (farads), energy stored in a magnetic field (henries), and opposition to alternating current flow (ohms).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-inductance.5c50b000.webp"
      },
      "title": "Inductance Stores Magnetic-Field Energy",
      "body": "**Inductance** describes the ability to store energy in a magnetic field. Magnetic field goes with inductance, and electric field goes with capacitance.",
      "uid": "1bh31csu6smay"
    },
    {
      "id": "ht-l07-f-henry",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Henry Measures Inductance",
      "body": "The unit of inductance is the **henry**. The farad belongs to capacitance.",
      "uid": "161a70vrd5td"
    },
    {
      "id": "ht-l07-f-impedance-unit",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Ohm Measures Impedance",
      "body": "The unit of **impedance** is the ohm. Impedance is the opposition to alternating current (AC) flow.",
      "uid": "i3essc1xcxdwa"
    },
    {
      "id": "ht-l07-f-khz",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Writing Kilohertz Correctly",
      "body": "Kilohertz is written **kHz**: a lowercase k, a capital H and a lowercase z.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The symbol kHz set very large in the middle in a plain sans-serif typeface, as one unbroken word in a single text element, all in ink, with generous letter spacing. From each letter a short leader line drops to a tag below it: from the k, Lowercase k; from the H, Capital H; from the z, Lowercase z. A caption above the symbol names it.",
        "imageSearchTerm": "How to Write Kilohertz",
        "alt": "The symbol kHz drawn large, each letter tagged by case: lowercase k, capital H, lowercase z, under the heading Kilohertz (kHz).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-khz.bf095e6b.webp"
      },
      "uid": "1vi8rtgend6js"
    },
    {
      "id": "ht-l07-f-mhz",
      "shape": "fact",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Writing Megahertz Correctly",
      "body": "Megahertz is written **MHz**: a capital M, a capital H and a lowercase z.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The symbol MHz set very large in the middle in a plain sans-serif typeface, as one unbroken word in a single text element, all in ink, with generous letter spacing. From each letter a short leader line drops to a tag below it: from the M, Capital M; from the H, Capital H; from the z, Lowercase z. A caption above the symbol names it.",
        "imageSearchTerm": "How to Write Megahertz",
        "alt": "The symbol MHz drawn large, each letter tagged by case: capital M, capital H, lowercase z, under the heading Megahertz (MHz).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-mhz.1bcec3e8.webp"
      },
      "uid": "z9m2zdmab0tt"
    },
    {
      "id": "ht-l07-f-power-formula",
      "shape": "fact",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Power Formula",
      "body": "In a direct current (DC) circuit, electrical **power** (P) is current (I) multiplied by voltage (E): P = I x E. Power is measured in watts.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A large triangle split by one horizontal line. The top section holds P. The bottom section is split by a short vertical line into I on the left and E on the right, with a small multiplication sign between them. Beside the triangle, two worked readings appear as plain lines of text. The first reads P = I x E, with I and E highlighted because they sit side by side, which means multiply. The second reads I = P / E: cover the I and P sits over E, which means divide. Mark the P section with the unit watts.",
        "imageSearchTerm": "The Power Formula Triangle",
        "alt": "The Power Formula Triangle: in a direct current (DC) circuit, power is current times voltage, and current is power divided by voltage.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-power-formula.38c6a76a.webp"
      },
      "uid": "x67lf0mv4rs4"
    },
    {
      "id": "ht-l07-f-power-138",
      "shape": "fact",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "13.8 Volts at 10 Amperes",
      "body": "A voltage of 13.8 volts of direct current (DC) and a current of 10 amperes deliver **138 watts**, because 13.8 x 10 is 138. A 13.8 volt supply feeding a radio that draws 10 amperes is a realistic case of this formula.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple closed circuit. On the left is a plain rectangular box for the DC source, with + and - terminals marked, labeled with its voltage. On the right is a plain rectangular box for the load, a radio drawn as an unbranded box with no knobs or display detail. Two wires connect them: one from the + terminal to the load and one from the load back to the - terminal. A small arrow on the top wire carries the current label. Under the circuit, a calculation strip reads 13.8 volts x 10 amperes = 138 watts.",
        "imageSearchTerm": "A 13.8-Volt Source Delivering 138 Watts",
        "alt": "A 13.8-Volt Source Delivering 138 Watts: a realistic direct current (DC) case: a 13.8-volt source feeds a load drawing 10 amperes, and the power works out to 138 watts.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-power-138.a64e9d05.webp"
      },
      "uid": "32m02s1a3x8wa"
    },
    {
      "id": "ht-l07-f-power-30",
      "shape": "fact",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "12 Volts at 2.5 Amperes",
      "body": "A voltage of 12 volts of direct current (DC) and a current of 2.5 amperes deliver **30 watts**, because 12 x 2.5 is 30. A quick check: 12 x 5 is 60, so half of that, 30, fits.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left is a battery in standard schematic form, a long plate for + and a short plate for -, labeled with its voltage. On the right is a resistor drawn as a standard zigzag for the load, with Power (P) = ? beside it. A small arrow on the top wire, leaving the + side, carries the current label. Under the circuit, a calculation strip reads P = I x E = 2.5 x 12 = 30 watts, and a second, smaller strip in the light gray tint gives the quick check.",
        "imageSearchTerm": "Finding Power: 12 Volts at 2.5 Amperes",
        "alt": "A 12-volt direct current (DC) battery driving 2.5 amperes through a load: power equals current times voltage, 2.5 times 12, or 30 watts.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-power-30.a5f40454.webp"
      },
      "uid": "zu6fai15e1u9e"
    },
    {
      "id": "ht-l07-f-current-120w",
      "shape": "fact",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Finding Current from Power",
      "body": "Delivering 120 watts at 12 volts of direct current (DC) takes **10 amperes**. Since power equals current times voltage, the current is the power divided by the voltage: 120 divided by 12 is 10.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left, a battery in standard schematic form (a long plate for + and a short plate for -), labeled with its voltage. On the right, a plain rectangular box for the load, labeled with its power. A small arrow on the top wire, leaving the + side, carries Current (I) = ?. Under the circuit, a calculation strip reads I = P / E = 120 / 12 = 10 amperes.",
        "imageSearchTerm": "Finding Current: 120 Watts at 12 Volts",
        "alt": "A 120-watt load on a 12-volt direct current (DC) battery: current equals power divided by voltage, 120 divided by 12, or 10 amperes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-current-120w.46c0b20b.webp"
      },
      "uid": "1tst5bkg93zaq"
    },
    {
      "id": "ht-l07-f-impedance-def",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Impedance Means",
      "body": "**Impedance** is the opposition to alternating current (AC) flow.",
      "uid": "1gbfrsbwqfart"
    },
    {
      "id": "ht-l07-q-magnetic-property",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Capacitance pairs with the electric field. Which property pairs with the magnetic field?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Impedance"
        },
        {
          "modality": "text",
          "value": "Admittance"
        },
        {
          "modality": "text",
          "value": "Inductance"
        },
        {
          "modality": "text",
          "value": "Resistance"
        }
      ],
      "correctIndex": 2,
      "explanation": "Inductance is the ability to store energy in a magnetic field. Impedance is opposition to alternating current (AC) flow, and admittance and resistance are not field-storage properties either.",
      "uid": "15j1hipcupj05"
    },
    {
      "id": "ht-l07-q-impedance-unit",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A component's opposition to alternating current (AC) flow is stated as a number. Which unit does it use?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Measured in ohms"
        },
        {
          "modality": "text",
          "value": "Measured in farads"
        },
        {
          "modality": "text",
          "value": "Measured in volts"
        },
        {
          "modality": "text",
          "value": "Measured in amperes"
        }
      ],
      "correctIndex": 0,
      "explanation": "Impedance is measured in ohms. The farad measures capacitance, so it does not fit, and volts and amperes are not impedance units.",
      "uid": "epb7ydanrb4b"
    },
    {
      "id": "ht-l07-q-dc-power-formula",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee knows the current and voltage in a direct current (DC) circuit. How is the power found?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voltage divided by current"
        },
        {
          "modality": "text",
          "value": "Current divided by voltage"
        },
        {
          "modality": "text",
          "value": "Voltage plus current"
        },
        {
          "modality": "text",
          "value": "Current times voltage"
        }
      ],
      "correctIndex": 3,
      "explanation": "Power is current multiplied by voltage. Dividing or adding the two gives other values, not watts.",
      "uid": "1mq8bo5112ztil"
    },
    {
      "id": "ht-l07-tf-farad-inductance",
      "shape": "trueFalse",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The farad is the unit of inductance.",
      "isTrue": false,
      "why": "The henry is the unit of inductance. The farad is the unit of capacitance.",
      "uid": "bo5wvk1lchnou"
    },
    {
      "id": "ht-l07-tf-impedance-ac",
      "shape": "trueFalse",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Impedance is the opposition to alternating current (AC) flow.",
      "isTrue": true,
      "why": "That is what impedance means, and its unit is the ohm.",
      "uid": "liqb2hq241kn"
    },
    {
      "id": "ht-l07-c-power-voltage",
      "shape": "cloze",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Power in a direct current (DC) circuit equals current multiplied by ___.",
      "answer": "voltage",
      "distractors": [
        "resistance",
        "capacitance",
        "inductance"
      ],
      "explanation": "Power is current times voltage (P = I x E). Current times resistance would give voltage, not power.",
      "uid": "s5n3xnw9855t"
    },
    {
      "id": "ht-l07-p-magnetic-storage",
      "shape": "pair",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Magnetic-field storage"
      },
      "sideB": {
        "modality": "text",
        "value": "Inductance"
      },
      "uid": "x77rqjy04oq"
    },
    {
      "id": "ht-l07-f-current-formula",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ohm's Law for Current",
      "body": "**Ohm's law** ties together current (I), voltage (E) and resistance (R). Current is voltage divided by resistance: I = E / R.",
      "uid": "1tt1b9zmjixwz"
    },
    {
      "id": "ht-l07-f-voltage-formula",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The three formulas I = E / R, E = I x R and R = E / I stacked as one set, each labelled with the quantity it finds.",
        "imageSearchTerm": "Three Forms of Ohm's Law",
        "alt": "Three forms of Ohm's law: I = E / R finds current, E = I x R finds voltage, and R = E / I finds resistance.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-voltage-formula.d2ed63a0.webp"
      },
      "title": "Ohm's Law for Voltage",
      "body": "Voltage is current times resistance: E = I x R. This is one form of **Ohm's law**.",
      "uid": "zreyxrrf0ful"
    },
    {
      "id": "ht-l07-f-resistance-formula",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ohm's Law for Resistance",
      "body": "**Resistance** is voltage divided by current: R = E / I. To find resistance, divide the voltage by the current.",
      "uid": "1tflg7ghtd26e"
    },
    {
      "id": "ht-l07-f-resistance-30",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "90 Volts and 3 Amperes",
      "body": "A circuit in which 3 amperes flows when connected to 90 volts has a resistance of **30 ohms**, because 90 / 3 is 30.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left is a battery in standard schematic form: a long plate for + and a short plate for -, labeled with its voltage. On the right is a resistor drawn as a standard zigzag, marked with a question mark beside R. Wires close the loop. A small arrow on the top wire, leaving the + side, carries the current label. Under the circuit, a calculation strip reads R = E / I = 90 / 3 = 30 ohms.",
        "imageSearchTerm": "Finding Resistance: 90 Volts and 3 Amperes",
        "alt": "Finding Resistance: 90 Volts and 3 Amperes: a circuit with a known voltage and current, where resistance is voltage divided by current.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-resistance-30.9c18109a.webp"
      },
      "uid": "s47jyp1unx4rh"
    },
    {
      "id": "ht-l07-f-resistance-8",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "12 Volts and 1.5 Amperes",
      "body": "A circuit with 12 volts applied and 1.5 amperes flowing has a resistance of **8 ohms**, because 12 / 1.5 is 8.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left is a battery in standard schematic form, a long plate for + and a short plate for -, labeled with its voltage. On the right is a resistor drawn as a standard zigzag, marked Resistance (R) = ?. Wires close the loop. A small arrow on the top wire, leaving the + side, carries the current label. Under the circuit, a calculation strip reads R = E / I = 12 / 1.5 = 8 ohms.",
        "imageSearchTerm": "Finding Resistance: 12 Volts and 1.5 Amperes",
        "alt": "A 12-volt battery driving 1.5 amperes through a resistor: resistance equals voltage divided by current, 12 divided by 1.5, or 8 ohms.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-resistance-8.2aab84c6.webp"
      },
      "uid": "1u5dh251b932bp"
    },
    {
      "id": "ht-l07-f-resistance-3",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "4 Amperes from 12 Volts",
      "body": "A circuit that draws 4 amperes from a 12-volt source has a resistance of **3 ohms**, because 12 / 4 is 3.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left, the source drawn as a plain rounded box with + and - terminals, labeled 12-volt source. On the right, a resistor drawn as a standard zigzag, marked Resistance (R) = ?. A small arrow on the top wire, leaving the + terminal, carries the current label. Under the circuit, a calculation strip reads R = E / I = 12 / 4 = 3 ohms.",
        "imageSearchTerm": "Finding Resistance: 4 Amperes from 12 Volts",
        "alt": "A 12-volt source supplying 4 amperes to a resistor: resistance equals voltage divided by current, 12 divided by 4, or 3 ohms.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-resistance-3.472e49bd.webp"
      },
      "uid": "814iuu1d3soe6"
    },
    {
      "id": "ht-l07-f-current-1-5",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "120 Volts across 80 Ohms",
      "body": "A circuit with an applied voltage of 120 volts and a resistance of 80 ohms carries **1.5 amperes**, because 120 / 80 is 1.5.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left, a voltage source in standard schematic form, a circle marked + and -, labeled with its voltage. On the right, a resistor drawn as a standard zigzag, labeled with its resistance. A small arrow on the top wire, leaving the + side, carries Current (I) = ?. Under the circuit, a calculation strip reads I = E / R = 120 / 80 = 1.5 amperes.",
        "imageSearchTerm": "Finding Current: 120 Volts across 80 Ohms",
        "alt": "A 120-volt source across an 80-ohm resistor: current equals voltage divided by resistance, 120 divided by 80, or 1.5 amperes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-current-1-5.5750b3e6.webp"
      },
      "uid": "16i9gxskid2nw"
    },
    {
      "id": "ht-l07-f-current-2",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "100 Ohms across 200 Volts",
      "body": "A 100-ohm resistor connected across 200 volts carries **2 amperes**, because 200 / 100 is 2. A current of several thousand amperes is a clear sign that the voltage was multiplied by the resistance instead of divided by it.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left is a battery in standard schematic form, a long plate for + and a short plate for -, labeled 200 volts. On the right is a standard zigzag resistor labeled 100 ohms. A small arrow on the top wire marks the unknown current. Below the circuit are two strips. The first is marked correct, with a check: I = E / R = 200 / 100 = 2 amperes. The second is greyed and crossed out, marked as a sign of an error: 200 x 100 = 20,000 amperes.",
        "imageSearchTerm": "Current Through 100 Ohms Across 200 Volts",
        "alt": "Current Through 100 Ohms Across 200 Volts: current found as voltage divided by resistance. It also flags the huge wrong result that comes from multiplying instead of dividing.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-current-2.df872e64.webp"
      },
      "uid": "1is0cgj1tfas15"
    },
    {
      "id": "ht-l07-f-current-10",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "24 Ohms across 240 Volts",
      "body": "A 24-ohm resistor connected across 240 volts carries **10 amperes**, because 240 / 24 is 10.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A schematic loop. On the left, a voltage source in standard schematic form, a circle marked + and -, labeled with its voltage. On the right, a resistor drawn as a standard zigzag, labeled 24-ohm resistor. A small arrow on the top wire, leaving the + side, carries Current (I) = ?. Under the circuit, a calculation strip reads I = E / R = 240 / 24 = 10 amperes.",
        "imageSearchTerm": "Finding Current: 24 Ohms across 240 Volts",
        "alt": "A 24-ohm resistor across a 240-volt source: current equals voltage divided by resistance, 240 divided by 24, or 10 amperes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-current-10.43b72863.webp"
      },
      "uid": "ihc198ymz6l0"
    },
    {
      "id": "ht-l07-f-voltage-1",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "0.5 Amperes through 2 Ohms",
      "body": "A current of 0.5 amperes through a 2-ohm resistor gives a voltage of **1 volt**, because 0.5 x 2 is 1.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A standard zigzag resistor drawn large in the middle of a horizontal wire, labeled 2-ohm resistor. A current arrow on the wire enters the resistor from the left, labeled 0.5 amperes. A voltage bracket spans the resistor from end to end, with Voltage (E) = ? on it. The wire continues a short way to the left and right as plain stubs; no source is drawn. Under it, a calculation strip reads E = I x R = 0.5 x 2 = 1 volt.",
        "imageSearchTerm": "Finding Voltage: 0.5 Amperes through 2 Ohms",
        "alt": "0.5 amperes flowing through a 2-ohm resistor: the voltage across it equals current times resistance, 0.5 times 2, or 1 volt.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-voltage-1.9871e943.webp"
      },
      "uid": "3h652p1ek2d7h"
    },
    {
      "id": "ht-l07-f-voltage-10",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "1 Ampere through 10 Ohms",
      "body": "A current of 1 ampere through a 10-ohm resistor gives **10 volts**, because 1 x 10 is 10.",
      "uid": "jddtlbt638qp"
    },
    {
      "id": "ht-l07-f-voltage-20",
      "shape": "fact",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "2 Amperes through 10 Ohms",
      "body": "A current of 2 amperes through a 10-ohm resistor gives **20 volts**, because 2 x 10 is 20. Doubling the current through the same resistor doubles the voltage.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, each showing one standard zigzag resistor labeled 10 ohms. A horizontal current arrow enters each resistor from the left. The left arrow is labeled 1 ampere, and the right arrow is twice as thick, labeled 2 amperes. A voltage bracket spans each resistor from end to end, marked + and -. The left bracket reads 10 volts and the right reads 20 volts, with the right bracket drawn visibly taller to show twice the value. A shared heading strip across the top reads E = I x R. Under each panel is its calculation: 1 x 10 = 10 volts and 2 x 10 = 20 volts.",
        "imageSearchTerm": "Doubling the Current Doubles the Voltage",
        "alt": "Doubling the Current Doubles the Voltage: two identical 10-ohm resistors, one carrying 1 ampere and one 2 amperes; by E = I x R, the voltage doubles.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-voltage-20.4c6c5089.webp"
      },
      "uid": "7wcf4e1aeqa18"
    },
    {
      "id": "ht-l07-f-series-current",
      "shape": "fact",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two simple circuit outlines side by side, one labelled series and one labelled parallel. Each has a short arrow or marker showing the quantity the guide says stays the same: current through every part in the series circuit, voltage across every part in the parallel circuit.",
        "imageSearchTerm": "What Stays the Same in Each Circuit",
        "alt": "What stays the same in each circuit: the same current through all components in series, and the same voltage across all components in parallel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l07-f-series-current.0cb3a53a.webp"
      },
      "title": "Series Circuits Share Current",
      "body": "In a **series circuit**, the current is always the same through all components. A parallel circuit keeps the voltage the same instead.",
      "uid": "voo5s4181n4wy"
    },
    {
      "id": "ht-l07-f-parallel-voltage",
      "shape": "fact",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Parallel Circuits Share Voltage",
      "body": "In a **parallel circuit**, the voltage is always the same across all components. Series goes with current, and parallel goes with voltage.",
      "uid": "1sq3eqp5c823r"
    },
    {
      "id": "ht-l07-q-voltage-formula",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee knows a circuit's current and resistance and needs the voltage. How is it found?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Current times resistance"
        },
        {
          "modality": "text",
          "value": "Current divided by resistance"
        },
        {
          "modality": "text",
          "value": "Current plus resistance"
        },
        {
          "modality": "text",
          "value": "Resistance divided by current"
        }
      ],
      "correctIndex": 0,
      "explanation": "Voltage is current times resistance. Dividing or adding the two does not give voltage.",
      "uid": "ztptgj15c5p85"
    },
    {
      "id": "ht-l07-q-series-meaning",
      "shape": "mcq",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which statement correctly describes a series circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The voltage is the same across every part",
          "short": "Same voltage everywhere"
        },
        {
          "modality": "text",
          "value": "Neither voltage nor current stays the same",
          "short": "Neither stays the same"
        },
        {
          "modality": "text",
          "value": "The current is the same through every part",
          "short": "Same current everywhere"
        },
        {
          "modality": "text",
          "value": "Both voltage and current stay the same",
          "short": "Both stay the same"
        }
      ],
      "correctIndex": 2,
      "explanation": "A series circuit keeps the current the same through all components. Equal voltage across all parts describes a parallel circuit.",
      "uid": "vcyum7yx6l6l"
    },
    {
      "id": "ht-l07-q-same-voltage-type",
      "shape": "mcq",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Every component in a circuit must see the same voltage. Which circuit type keeps it that way?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Series"
        },
        {
          "modality": "text",
          "value": "Resonant"
        },
        {
          "modality": "text",
          "value": "Branch"
        },
        {
          "modality": "text",
          "value": "Parallel"
        }
      ],
      "correctIndex": 3,
      "explanation": "Parallel circuits keep the voltage the same across all components. Series circuits keep the current the same instead.",
      "uid": "w56qrf16srpj3"
    },
    {
      "id": "ht-l07-q-doubled-current",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A 10-ohm resistor drops 10 volts. The current through it is doubled. What is the new voltage?"
      },
      "options": [
        {
          "modality": "text",
          "value": "5 volts"
        },
        {
          "modality": "text",
          "value": "20 volts"
        },
        {
          "modality": "text",
          "value": "12 volts"
        },
        {
          "modality": "text",
          "value": "100 volts"
        }
      ],
      "correctIndex": 1,
      "explanation": "Voltage is current times resistance, so doubling the current across the same resistor doubles the voltage to 20 volts.",
      "uid": "ve12uy1t6xg7m"
    },
    {
      "id": "ht-l07-q-huge-current-mistake",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A learner works out the current for 120 volts across 80 ohms and for 200 volts across 100 ohms, and gets 9600 and 20,000 amperes. Which slip causes those answers?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Dividing voltage by resistance"
        },
        {
          "modality": "text",
          "value": "Adding voltage and resistance"
        },
        {
          "modality": "text",
          "value": "Multiplying voltage by resistance",
          "short": "Multiplying voltage by resistance"
        },
        {
          "modality": "text",
          "value": "Dividing resistance by voltage"
        }
      ],
      "correctIndex": 2,
      "explanation": "120 x 80 is 9600 and 200 x 100 is 20,000, so the voltage was multiplied by the resistance. Current is voltage divided by resistance: 1.5 and 2 amperes.",
      "uid": "1ldyr111r3d4cj"
    },
    {
      "id": "ht-l07-tf-parallel-voltage",
      "shape": "trueFalse",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "In a parallel circuit, the voltage is the same across all components.",
      "isTrue": true,
      "why": "Parallel circuits keep the voltage the same across all components.",
      "uid": "8i7ngegdx6ak"
    },
    {
      "id": "ht-l07-tf-series-voltage",
      "shape": "trueFalse",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "In a series circuit, the voltage is always the same across all components.",
      "isTrue": false,
      "why": "A series circuit keeps the current the same through all components. Equal voltage belongs to a parallel circuit.",
      "uid": "1bd7ht810u0zba"
    },
    {
      "id": "ht-l07-tf-divide-for-current",
      "shape": "trueFalse",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Dividing voltage by resistance gives the current in a circuit.",
      "isTrue": true,
      "why": "Ohm's law gives current as voltage divided by resistance: I = E / R.",
      "uid": "157vm3f1u3km27"
    },
    {
      "id": "ht-l07-c-resistance-current",
      "shape": "cloze",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Resistance equals voltage divided by ___.",
      "answer": "current",
      "distractors": [
        "power",
        "capacitance",
        "frequency"
      ],
      "explanation": "Ohm's law gives R = E / I, so voltage is divided by current to find resistance.",
      "uid": "193hkdi1l42icu"
    },
    {
      "id": "ht-l07-p-series-current",
      "shape": "pair",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Series circuit"
      },
      "sideB": {
        "modality": "text",
        "value": "Same current through all parts"
      },
      "uid": "pe58vh1jyhinh"
    },
    {
      "id": "ht-l07-tf-khz-written",
      "shape": "trueFalse",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Kilohertz is written with a capital K, a capital H and a lowercase z.",
      "isTrue": false,
      "why": "Kilohertz takes a lowercase k, a capital H and a lowercase z (kHz). A capital K is wrong.",
      "uid": "1ysvmbm1hzyrlu"
    },
    {
      "id": "ht-l07-q-power-calc",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A radio on a 6 volt direct current (DC) supply draws 4 amperes. How much power does it use?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1.5 watts"
        },
        {
          "modality": "text",
          "value": "24 watts"
        },
        {
          "modality": "text",
          "value": "10 watts"
        },
        {
          "modality": "text",
          "value": "2 watts"
        }
      ],
      "correctIndex": 1,
      "explanation": "Power is current times voltage: 6 x 4 = 24 watts. 1.5 comes from dividing, 10 from adding and 2 from subtracting.",
      "uid": "pkcal21rgjy9a"
    },
    {
      "id": "ht-l07-q-current-from-power",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A radio uses 48 watts from a 12 volt direct current (DC) supply. How many amperes does it draw?"
      },
      "options": [
        {
          "modality": "text",
          "value": "36 amperes"
        },
        {
          "modality": "text",
          "value": "576 amperes"
        },
        {
          "modality": "text",
          "value": "4 amperes"
        },
        {
          "modality": "text",
          "value": "0.25 amperes"
        }
      ],
      "correctIndex": 2,
      "explanation": "Current is power divided by voltage: 48 / 12 = 4 amperes. Multiplying gives 576, and subtracting gives 36.",
      "uid": "194le5mz2bgxu"
    },
    {
      "id": "ht-l07-q-resistance-calc",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A circuit carries 5 amperes when 20 volts is applied. What is its resistance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "100 ohms"
        },
        {
          "modality": "text",
          "value": "15 ohms"
        },
        {
          "modality": "text",
          "value": "4 ohms"
        },
        {
          "modality": "text",
          "value": "0.25 ohms"
        }
      ],
      "correctIndex": 2,
      "explanation": "Resistance is voltage divided by current: 20 / 5 = 4 ohms. Multiplying gives 100 and subtracting gives 15.",
      "uid": "18fntjg1qiceak"
    },
    {
      "id": "ht-l07-q-current-calc",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A 15-ohm resistor is connected across 60 volts. What current flows through it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "900 amperes"
        },
        {
          "modality": "text",
          "value": "4 amperes"
        },
        {
          "modality": "text",
          "value": "0.25 amperes"
        },
        {
          "modality": "text",
          "value": "75 amperes"
        }
      ],
      "correctIndex": 1,
      "explanation": "Current is voltage divided by resistance: 60 / 15 = 4 amperes. Multiplying gives 900 and adding gives 75.",
      "uid": "1o5l4x92ck0er"
    },
    {
      "id": "ot-ht-l07-t5c01",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What describes the ability to store energy in an electric field?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Inductance"
        },
        {
          "modality": "text",
          "value": "Resistance"
        },
        {
          "modality": "text",
          "value": "Frequency"
        },
        {
          "modality": "text",
          "value": "Capacitance"
        }
      ],
      "correctIndex": 3,
      "explanation": "Capacitance stores energy in an electric field. Inductance is the magnetic-field property, and resistance and frequency are not storage abilities.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ixk67p1vgbcrr"
    },
    {
      "id": "ot-ht-l07-t5c02",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the unit of capacitance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Farad"
        },
        {
          "modality": "text",
          "value": "Ohm"
        },
        {
          "modality": "text",
          "value": "Volt"
        },
        {
          "modality": "text",
          "value": "Henry"
        }
      ],
      "correctIndex": 0,
      "explanation": "The farad is the unit of capacitance. The henry is for inductance, and the ohm and volt are not capacitance units.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1o0cp7212ali0m"
    },
    {
      "id": "ot-ht-l07-t5c03",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What describes the ability to store energy in a magnetic field?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Admittance"
        },
        {
          "modality": "text",
          "value": "Capacitance"
        },
        {
          "modality": "text",
          "value": "Resistance"
        },
        {
          "modality": "text",
          "value": "Inductance"
        }
      ],
      "correctIndex": 3,
      "explanation": "Inductance stores energy in a magnetic field. Capacitance is its electric-field counterpart.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "neb6ue184ek48"
    },
    {
      "id": "ot-ht-l07-t5c04",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the unit of inductance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Coulomb"
        },
        {
          "modality": "text",
          "value": "Farad"
        },
        {
          "modality": "text",
          "value": "Henry"
        },
        {
          "modality": "text",
          "value": "Ohm"
        }
      ],
      "correctIndex": 2,
      "explanation": "The henry is the unit of inductance. The farad measures capacitance and the ohm is not an inductance unit.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1enjfrw1bm9z4"
    },
    {
      "id": "ot-ht-l07-t5c05",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the unit of impedance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Volt"
        },
        {
          "modality": "text",
          "value": "Ampere"
        },
        {
          "modality": "text",
          "value": "Coulomb"
        },
        {
          "modality": "text",
          "value": "Ohm"
        }
      ],
      "correctIndex": 3,
      "explanation": "Impedance is opposition to alternating current (AC) flow and is measured in ohms. Volt, ampere and coulomb are not impedance units.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19t1q3oictwui"
    },
    {
      "id": "ot-ht-l07-t5c12",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is impedance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The opposition to AC current flow"
        },
        {
          "modality": "text",
          "value": "The inverse of resistance"
        },
        {
          "modality": "text",
          "value": "The inverse of reactance"
        },
        {
          "modality": "text",
          "value": "The power handling capability of a component"
        }
      ],
      "correctIndex": 0,
      "explanation": "Impedance is the opposition to alternating current (AC) flow. It is not an inverse of resistance or reactance, nor a power rating.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "vzdoy5e4pxh7"
    },
    {
      "id": "ot-ht-l07-t5c06",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the abbreviation for kilohertz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "kHz"
        },
        {
          "modality": "text",
          "value": "khz"
        },
        {
          "modality": "text",
          "value": "KHz"
        },
        {
          "modality": "text",
          "value": "KHZ"
        }
      ],
      "correctIndex": 0,
      "explanation": "Kilohertz is kHz: lowercase k, capital H, lowercase z. The other capitalizations are wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "oqmbbxtzaa1l"
    },
    {
      "id": "ot-ht-l07-t5c07",
      "shape": "mcq",
      "tags": [
        "units",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the abbreviation for megahertz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "mHz"
        },
        {
          "modality": "text",
          "value": "mHZ"
        },
        {
          "modality": "text",
          "value": "Mhz"
        },
        {
          "modality": "text",
          "value": "MHz"
        }
      ],
      "correctIndex": 3,
      "explanation": "Megahertz is MHz: capital M, capital H, lowercase z. The lowercase m forms and Mhz are wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "t4rouz4ngcwz"
    },
    {
      "id": "ot-ht-l07-t5c08",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "What formula is used to calculate electrical power (P) in a DC circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "P = I x E"
        },
        {
          "modality": "text",
          "value": "P = E / I"
        },
        {
          "modality": "text",
          "value": "P = I2 x E"
        },
        {
          "modality": "text",
          "value": "P = I / E"
        }
      ],
      "correctIndex": 0,
      "explanation": "In a direct current (DC) circuit, power is current times voltage, P = I x E. Dividing them or squaring the current does not give power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ti90q5gvxrtr"
    },
    {
      "id": "ot-ht-l07-t5c09",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "How much power is delivered by a voltage of 13.8 volts DC and a current of 10 amperes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "138 watts"
        },
        {
          "modality": "text",
          "value": "0.7 watts"
        },
        {
          "modality": "text",
          "value": "23.8 watts"
        },
        {
          "modality": "text",
          "value": "3.8 watts"
        }
      ],
      "correctIndex": 0,
      "explanation": "Power is voltage times current: 13.8 x 10 = 138 watts. 0.7 comes from dividing, 23.8 from adding and 3.8 from subtracting. DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "14llpte1xee93m"
    },
    {
      "id": "ot-ht-l07-t5c10",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "How much power is delivered by a voltage of 12 volts DC and a current of 2.5 amperes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "4.8 watts"
        },
        {
          "modality": "text",
          "value": "30 watts"
        },
        {
          "modality": "text",
          "value": "14.5 watts"
        },
        {
          "modality": "text",
          "value": "0.208 watts"
        }
      ],
      "correctIndex": 1,
      "explanation": "Multiply voltage by current: 12 x 2.5 = 30 watts. DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1r2z5cc14oxhyo"
    },
    {
      "id": "ot-ht-l07-t5c11",
      "shape": "mcq",
      "tags": [
        "power",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "How much current is required to deliver 120 watts at a voltage of 12 volts DC?"
      },
      "options": [
        {
          "modality": "text",
          "value": "0.1 amperes"
        },
        {
          "modality": "text",
          "value": "10 amperes"
        },
        {
          "modality": "text",
          "value": "12 amperes"
        },
        {
          "modality": "text",
          "value": "132 amperes"
        }
      ],
      "correctIndex": 1,
      "explanation": "Current is power divided by voltage: 120 / 12 = 10 amperes. DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "14pz6fp1yyinij"
    },
    {
      "id": "ot-ht-l07-t5d01",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "What formula is used to calculate current in a circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "I = E x R"
        },
        {
          "modality": "text",
          "value": "I = E / R"
        },
        {
          "modality": "text",
          "value": "I = E2 x R"
        },
        {
          "modality": "text",
          "value": "I = E2 / R"
        }
      ],
      "correctIndex": 1,
      "explanation": "Current is voltage divided by resistance, I = E / R. Multiplying them gives wrong, very large values.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qn43941y9b8xo"
    },
    {
      "id": "ot-ht-l07-t5d02",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "What formula is used to calculate voltage in a circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "E = I x R"
        },
        {
          "modality": "text",
          "value": "E = I / R"
        },
        {
          "modality": "text",
          "value": "E = I2 x R"
        },
        {
          "modality": "text",
          "value": "E = I2 / R"
        }
      ],
      "correctIndex": 0,
      "explanation": "Voltage is current times resistance, E = I x R. Dividing current by resistance is not Ohm's law for voltage.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "18un14c1fgej18"
    },
    {
      "id": "ot-ht-l07-t5d03",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "math"
      ],
      "prompt": {
        "modality": "text",
        "value": "What formula is used to calculate resistance in a circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "R = E x I"
        },
        {
          "modality": "text",
          "value": "R = E / I"
        },
        {
          "modality": "text",
          "value": "R = E + I"
        },
        {
          "modality": "text",
          "value": "R = E - I"
        }
      ],
      "correctIndex": 1,
      "explanation": "Resistance is voltage divided by current, R = E / I. Multiplying, adding or subtracting them is wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "441j151s6k9dv"
    },
    {
      "id": "ot-ht-l07-t5d04",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the resistance of a circuit in which a current of 3 amperes flows when connected to 90 volts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "3 ohms"
        },
        {
          "modality": "text",
          "value": "30 ohms"
        },
        {
          "modality": "text",
          "value": "1/30 ohm"
        },
        {
          "modality": "text",
          "value": "270 ohms"
        }
      ],
      "correctIndex": 1,
      "explanation": "Divide voltage by current: 90 / 3 = 30 ohms.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "tel52j1clqyo9"
    },
    {
      "id": "ot-ht-l07-t5d05",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the resistance of a circuit for which the applied voltage is 12 volts and the current flow is 1.5 amperes?"
      },
      "options": [
        {
          "modality": "text",
          "value": "18 ohms"
        },
        {
          "modality": "text",
          "value": "0.125 ohms"
        },
        {
          "modality": "text",
          "value": "8 ohms"
        },
        {
          "modality": "text",
          "value": "13.5 ohms"
        }
      ],
      "correctIndex": 2,
      "explanation": "Divide voltage by current: 12 / 1.5 = 8 ohms.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "dlhklt1ncadwf"
    },
    {
      "id": "ot-ht-l07-t5d06",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the resistance of a circuit that draws 4 amperes from a 12-volt source?"
      },
      "options": [
        {
          "modality": "text",
          "value": "3 ohms"
        },
        {
          "modality": "text",
          "value": "16 ohms"
        },
        {
          "modality": "text",
          "value": "48 ohms"
        },
        {
          "modality": "text",
          "value": "8 ohms"
        }
      ],
      "correctIndex": 0,
      "explanation": "Divide voltage by current: 12 / 4 = 3 ohms. Multiplying gives 48, which is not the resistance.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ttua18nevj7w"
    },
    {
      "id": "ot-ht-l07-t5d07",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the current in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms?"
      },
      "options": [
        {
          "modality": "text",
          "value": "9600 amperes"
        },
        {
          "modality": "text",
          "value": "200 amperes"
        },
        {
          "modality": "text",
          "value": "0.667 amperes"
        },
        {
          "modality": "text",
          "value": "1.5 amperes"
        }
      ],
      "correctIndex": 3,
      "explanation": "Divide voltage by resistance: 120 / 80 = 1.5 amperes. 9600 comes from multiplying.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "usg0qe1ysivdu"
    },
    {
      "id": "ot-ht-l07-t5d08",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the current through a 100-ohm resistor connected across 200 volts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "20,000 amperes"
        },
        {
          "modality": "text",
          "value": "0.5 amperes"
        },
        {
          "modality": "text",
          "value": "2 amperes"
        },
        {
          "modality": "text",
          "value": "100 amperes"
        }
      ],
      "correctIndex": 2,
      "explanation": "Divide voltage by resistance: 200 / 100 = 2 amperes. 20,000 comes from multiplying.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "fjus6g1uey9d4"
    },
    {
      "id": "ot-ht-l07-t5d09",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the current through a 24-ohm resistor connected across 240 volts?"
      },
      "options": [
        {
          "modality": "text",
          "value": "2400 amperes"
        },
        {
          "modality": "text",
          "value": "0.1 amperes"
        },
        {
          "modality": "text",
          "value": "10 amperes"
        },
        {
          "modality": "text",
          "value": "5760 amperes"
        }
      ],
      "correctIndex": 2,
      "explanation": "Divide voltage by resistance: 240 / 24 = 10 amperes.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1b0z3cb1ynkxwt"
    },
    {
      "id": "ot-ht-l07-t5d10",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the voltage across a 2-ohm resistor if a current of 0.5 amperes flows through it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1 volt"
        },
        {
          "modality": "text",
          "value": "0.25 volts"
        },
        {
          "modality": "text",
          "value": "2.5 volts"
        },
        {
          "modality": "text",
          "value": "1.5 volts"
        }
      ],
      "correctIndex": 0,
      "explanation": "Voltage is current times resistance: 0.5 x 2 = 1 volt.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1bkvuhrwfxssz"
    },
    {
      "id": "ot-ht-l07-t5d11",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the voltage across a 10-ohm resistor if a current of 1 ampere flows through it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1 volt"
        },
        {
          "modality": "text",
          "value": "10 volts"
        },
        {
          "modality": "text",
          "value": "11 volts"
        },
        {
          "modality": "text",
          "value": "9 volts"
        }
      ],
      "correctIndex": 1,
      "explanation": "Voltage is current times resistance: 1 x 10 = 10 volts.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19tvmw810w6yo2"
    },
    {
      "id": "ot-ht-l07-t5d12",
      "shape": "mcq",
      "tags": [
        "math",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the voltage across a 10-ohm resistor if a current of 2 amperes flows through it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "8 volts"
        },
        {
          "modality": "text",
          "value": "0.2 volts"
        },
        {
          "modality": "text",
          "value": "12 volts"
        },
        {
          "modality": "text",
          "value": "20 volts"
        }
      ],
      "correctIndex": 3,
      "explanation": "Voltage is current times resistance: 2 x 10 = 20 volts.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1d9g57la8bygr"
    },
    {
      "id": "ot-ht-l07-t5d13",
      "shape": "mcq",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "In which type of circuit is the current always the same through all components?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Series"
        },
        {
          "modality": "text",
          "value": "Parallel"
        },
        {
          "modality": "text",
          "value": "Resonant"
        },
        {
          "modality": "text",
          "value": "Branch"
        }
      ],
      "correctIndex": 0,
      "explanation": "In a series circuit the current is the same through all components. Parallel circuits share voltage instead.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "foyzxfomlozf"
    },
    {
      "id": "ot-ht-l07-t5d14",
      "shape": "mcq",
      "tags": [
        "circuits",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "In which type of circuit is the voltage always the same across all components?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Series"
        },
        {
          "modality": "text",
          "value": "Parallel"
        },
        {
          "modality": "text",
          "value": "Resonant"
        },
        {
          "modality": "text",
          "value": "Branch"
        }
      ],
      "correctIndex": 1,
      "explanation": "In a parallel circuit the voltage is the same across all components. Series circuits share current instead.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13yu19p6wqd4r"
    },
    {
      "id": "ht-l08-f-resistor",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Resistor Opposes Current",
      "body": "A **resistor** is the component that opposes the flow of current in a direct current (DC) circuit.",
      "illustration": {
        "imagePrompt": "Six axial-lead resistors with colored bands, on a plain background.",
        "imageSearchTerm": "resistor",
        "alt": "Six axial-lead resistors with colored bands, on a plain background.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Evan-Amos · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electronic-Axial-Lead-Resistors-Array.png",
        "subject": "Six axial-lead resistors with colored bands, on a plain background.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-resistor.2773df0e.webp"
      },
      "uid": "1rot52k1rzxprs"
    },
    {
      "id": "ht-l08-f-volume-pot",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Potentiometer as Volume Control",
      "body": "A **potentiometer** is the part often used as an adjustable volume control.",
      "illustration": {
        "imagePrompt": "A close photo of a rotary volume knob on a radio, with the knob in focus.",
        "imageSearchTerm": "radio volume knob potentiometer",
        "alt": "A rotary volume knob on a radio",
        "kind": "photo",
        "credit": "Wikimedia Commons · Evan-Amos · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electronic-Component-Potentiometer.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-volume-pot.fa388aae.webp"
      },
      "uid": "s4b3o61v4gjdq"
    },
    {
      "id": "ht-l08-f-volume-pot-hero",
      "shape": "fact",
      "title": "Adjusting the Volume",
      "body": "When a circuit needs an adjustable volume control, the part often used is a potentiometer.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A close photo of a rotary volume knob on a radio, with the knob in focus.",
        "imageSearchTerm": "radio volume knob potentiometer",
        "alt": "A rotary volume knob on a radio",
        "kind": "photo",
        "credit": "Wikimedia Commons · Evan-Amos · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electronic-Component-Potentiometer.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-volume-pot.fa388aae.webp"
      },
      "uid": "dozj8b8g45rv"
    },
    {
      "id": "ht-l08-f-pot-resistance",
      "shape": "fact",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Potentiometer Controls",
      "body": "A potentiometer controls **resistance**. An adjustable volume control is a part whose resistance can be changed.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, the standard schematic symbol for a potentiometer. Draw a horizontal zigzag resistor with a terminal at each end, and a third terminal whose arrow points onto the middle of the zigzag. On the right, a simple round control knob with a curved double-headed arrow around it, linked by a dashed line to the arrow on the symbol. This shows that turning the control changes the resistance. Put a caption under the symbol naming the part and what it controls.",
        "imageSearchTerm": "A potentiometer is an adjustable resistance",
        "alt": "A potentiometer is an adjustable resistance. A potentiometer is a resistance that can be changed, which is why it is used as an adjustable volume control.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-pot-resistance.4a1f4cb0.webp"
      },
      "uid": "12gwe2q1f7suck"
    },
    {
      "id": "ht-l08-f-capacitor-field",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Capacitors Store Electric-Field Energy",
      "body": "A **capacitor** stores energy in an electric field.",
      "illustration": {
        "imagePrompt": "A group of capacitors of different types: electrolytic, ceramic, film and a trimmer.",
        "imageSearchTerm": "capacitor",
        "alt": "A group of capacitors of different types: electrolytic, ceramic, film and a trimmer.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Eric Schrader from San Francisco, CA, United States · CC BY-SA 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Capacitors_(7189597135).jpg",
        "subject": "A group of capacitors of different types: electrolytic, ceramic, film and a trimmer.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-capacitor-field.d9042f4a.webp"
      },
      "uid": "o2g7ei1ay032w"
    },
    {
      "id": "ht-l08-f-capacitor-build",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "How a Capacitor Is Built",
      "body": "A capacitor consists of **conductive surfaces separated by an insulator**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A cutaway of a simple capacitor in a flat, slightly angled view: two flat, parallel metal plates standing upright and facing each other, with a thin sheet of insulating material filling the gap between them. A lead wire leaves the outer face of each plate. One label with two leader lines points at both plates; a second label points at the insulating sheet; a third label, with two leader lines, points at the two leads.",
        "imageSearchTerm": "How a capacitor is built",
        "alt": "A cutaway capacitor: two parallel conductive plates with an insulator between them, and a lead wire on each plate.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-capacitor-build.60518710.webp"
      },
      "uid": "1xnb4q51yug69t"
    },
    {
      "id": "ht-l08-f-inductor-field",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Inductors Store Magnetic-Field Energy",
      "body": "An **inductor** stores energy in a magnetic field.",
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Two columns, one for the capacitor and one for the inductor. Each column gives the field where it stores energy and how it is built. The inductor column shows a coil of wire, and the capacitor column shows conductive surfaces with an insulator between them. No schematic symbols and no photographs.",
        "imageSearchTerm": "Capacitor and inductor side by side",
        "alt": "A capacitor stores energy in an electric field, between conductive surfaces separated by an insulator; an inductor, typically a coil of wire, stores it in a magnetic field.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-inductor-field.d74c7897.webp"
      },
      "uid": "1ev9poq2z025w"
    },
    {
      "id": "ht-l08-f-inductor-coil",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "An Inductor Is a Coil",
      "body": "An inductor is typically constructed as a **coil of wire**.",
      "illustration": {
        "imagePrompt": "A close photo of a small coil of copper wire wound on a form, on a workbench.",
        "imageSearchTerm": "wire coil inductor electronics",
        "alt": "A coil of copper wire used as an inductor",
        "kind": "photo",
        "credit": "Wikimedia Commons · Pittigrilli · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Coil_with_ferrite_core_from_dimmer.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-inductor-coil.e89e34c2.webp"
      },
      "uid": "1aioi915e8ddd"
    },
    {
      "id": "ht-l08-f-inductor-coil-hero",
      "shape": "fact",
      "title": "Wire Wound Into a Coil",
      "body": "An inductor is typically constructed as a coil of wire.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A close photo of a small coil of copper wire wound on a form, on a workbench.",
        "imageSearchTerm": "wire coil inductor electronics",
        "alt": "A coil of copper wire used as an inductor",
        "kind": "photo",
        "credit": "Wikimedia Commons · Pittigrilli · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Coil_with_ferrite_core_from_dimmer.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-inductor-coil.e89e34c2.webp"
      },
      "uid": "1qe8axi1b8fbxw"
    },
    {
      "id": "ht-l08-f-spdt",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What an SPDT Switch Does",
      "body": "A **single-pole double-throw (SPDT) switch** switches a single circuit between one of two other circuits.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A standard schematic SPDT switch. A single common terminal on the left has a pivoting blade (a straight line hinged at that terminal). Two contact terminals sit to the right, one upper and one lower. The blade touches the upper contact, and a dashed outline shows its other position on the lower contact. A wire runs left from the common terminal to a box marked as the single circuit. Wires run right from the upper and lower contacts to two separate boxes, each marked as one of the other circuits. A curved arrow between the two blade positions shows the switch moving between them.",
        "imageSearchTerm": "How an SPDT switch routes one circuit",
        "alt": "How a single-pole double-throw (SPDT) switch routes one circuit: it connects the single circuit to either of two other circuits.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-spdt.7b6f9109.webp"
      },
      "uid": "1kek6zswwgei"
    },
    {
      "id": "ht-l08-f-switch-t2",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Reading Switch Type on Figure T-2",
      "body": "In the reference schematic labeled figure T-2, component 3 is a **single-pole single-throw** switch.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-switch-t2.5984731e.webp"
      },
      "uid": "c9kyttpt22jz"
    },
    {
      "id": "ht-l08-f-rechargeable",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Rechargeable Battery Chemistries",
      "body": "**Nickel-metal hydride**, **lithium-ion** and **lead-acid** batteries can all be recharged. Nickel-cadmium can be recharged as well.",
      "illustration": {
        "imagePrompt": "Four nickel-metal hydride rechargeable AA batteries.",
        "imageSearchTerm": "rechargeable battery",
        "alt": "Four nickel-metal hydride rechargeable AA batteries.",
        "kind": "photo",
        "credit": "Wikimedia Commons · RAIL P (RAIL.PHOTOGRAPHY) · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:IKEA_LADDA_rechargeable_AA-batteries.jpg",
        "subject": "Four nickel-metal hydride rechargeable AA batteries.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-rechargeable.c165a28e.webp"
      },
      "uid": "b4kkl28o50hy"
    },
    {
      "id": "ht-l08-f-carbon-zinc",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Carbon-Zinc Is Not Rechargeable",
      "body": "**Carbon-zinc** batteries cannot be recharged. Nickel-metal hydride, lithium-ion, lead-acid and nickel-cadmium batteries can all be recharged.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two columns side by side. The left column, headed rechargeable, holds four plain generic battery outlines, each with a circular-arrow recharge mark and a name: nickel-metal hydride, lithium-ion, lead-acid and nickel-cadmium. The right column, headed not rechargeable, holds one generic battery outline named carbon-zinc, with the circular-arrow mark crossed out.",
        "imageSearchTerm": "Which battery chemistries can be recharged",
        "alt": "Which battery chemistries can be recharged: five battery chemistries sorted into rechargeable and not rechargeable, with carbon-zinc the one that cannot be recharged.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-carbon-zinc.2c38dd08.webp"
      },
      "uid": "1rj8qw1uu2dhe"
    },
    {
      "id": "ht-l08-q-capacitor-build",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which part is made of conductive surfaces separated by an insulator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Inductor"
        },
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Diode"
        }
      ],
      "correctIndex": 0,
      "explanation": "A capacitor is built from conductive surfaces with an insulator between them. An inductor is a coil of wire instead, and a resistor opposes current.",
      "uid": "1mr0cod1ilkc2n"
    },
    {
      "id": "ht-l08-q-portable-battery",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A portable station's builder wants a battery that can be recharged. Which of these chemistries cannot be recharged?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Nickel-metal hydride"
        },
        {
          "modality": "text",
          "value": "Lithium-ion"
        },
        {
          "modality": "text",
          "value": "Carbon-zinc"
        },
        {
          "modality": "text",
          "value": "Lead-acid"
        }
      ],
      "correctIndex": 2,
      "explanation": "Carbon-zinc cannot be recharged. Nickel-metal hydride, lithium-ion and lead-acid are all rechargeable.",
      "uid": "1dnxo2e18sp7c0"
    },
    {
      "id": "ht-l08-q-two-circuits",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A builder needs one switch that connects a single circuit to either of two other circuits. Which switch type does that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Single-pole double-throw"
        },
        {
          "modality": "text",
          "value": "Single-pole single-throw"
        },
        {
          "modality": "text",
          "value": "Double-pole single-throw"
        },
        {
          "modality": "text",
          "value": "Double-pole double-throw"
        }
      ],
      "correctIndex": 0,
      "explanation": "A single-pole double-throw (SPDT) switch switches a single circuit between one of two other circuits. A switch that only opens or closes one circuit is a different type.",
      "uid": "ecjffapd5ez2"
    },
    {
      "id": "ht-l08-q-coil-part",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which part is typically built as a coil of wire?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Diode"
        },
        {
          "modality": "text",
          "value": "Inductor"
        }
      ],
      "correctIndex": 3,
      "explanation": "An inductor is typically a coil of wire. A capacitor is built from conductive surfaces and an insulator, and a transistor and a diode are not typically coils.",
      "uid": "g1ph7z8js8fl"
    },
    {
      "id": "ht-l08-tf-pot-capacitance",
      "shape": "trueFalse",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A potentiometer is the part that controls capacitance.",
      "isTrue": false,
      "why": "A potentiometer controls resistance. It does not control inductance, capacitance or field strength.",
      "uid": "ccixju12heju4"
    },
    {
      "id": "ht-l08-tf-nicad",
      "shape": "trueFalse",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A nickel-cadmium battery is a rechargeable type.",
      "isTrue": true,
      "why": "Nickel-cadmium can be recharged, as can lead-acid and lithium-ion. Carbon-zinc, by contrast, cannot be recharged.",
      "uid": "1d837zruikefn"
    },
    {
      "id": "ht-l08-c-resistor",
      "shape": "cloze",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "The part that opposes the flow of current in a direct current (DC) circuit is the ___.",
      "answer": "resistor",
      "distractors": [
        "inductor",
        "inverter",
        "transformer"
      ],
      "explanation": "A resistor opposes current flow in a DC circuit. An inductor, an inverter and a transformer do not do this job.",
      "uid": "1d49psx16f9c9p"
    },
    {
      "id": "ht-l08-p-inductor-field",
      "shape": "pair",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Inductor"
      },
      "sideB": {
        "modality": "text",
        "value": "Stores energy in a magnetic field"
      },
      "uid": "1sjo1ha1img8eo"
    },
    {
      "id": "ht-l08-f-diode-one-way",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Diode Passes Current One Way",
      "body": "A **diode** is the electronic component that allows current to flow in only one direction.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, each with a standard diode symbol (a triangle pointing at a bar) on a horizontal wire. In the left panel, a bold arrow runs along the wire in the direction the triangle points, passing through the diode. In the right panel, a bold arrow approaches from the bar side and stops at a blocking mark at the diode. The diode faces the same way in both panels.",
        "imageSearchTerm": "A diode lets current through one way only",
        "alt": "A diode lets current through one way only. A diode passes current in one direction and blocks it in the other.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-diode-one-way.84e0c76d.webp"
      },
      "uid": "1erig1gvnpiq4"
    },
    {
      "id": "ht-l08-f-diode-electrodes",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Diode Electrode Names",
      "body": "The two electrodes of a diode are the **anode and cathode**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: At the top, a large standard diode symbol drawn horizontally, with the triangle on the left and the bar on the right, and a lead at each end. Below it, a plain cylindrical diode package aligned with the symbol, with wire leads out of each end and a band (stripe) around the right end. Dashed vertical lines link the triangle side of the symbol to the plain end of the package, and the bar side to the striped end.",
        "imageSearchTerm": "Anode, cathode and the cathode stripe",
        "alt": "Anode, cathode and the cathode stripe: the two diode electrodes named, with the stripe on a diode's package matching the cathode end of the symbol.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-diode-electrodes.ffb02c54.webp"
      },
      "uid": "63jh2p15r3kqj"
    },
    {
      "id": "ht-l08-f-cathode-stripe",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Stripe Marks the Cathode",
      "body": "The cathode lead of a semiconductor diode is often marked on the package with a **stripe**.",
      "illustration": {
        "imagePrompt": "A close photo of a small black diode with a light stripe near one end, resting on a workbench.",
        "imageSearchTerm": "diode stripe cathode close-up",
        "alt": "A small diode with a stripe marking its cathode end",
        "kind": "photo",
        "credit": "Wikimedia Commons · John Maushammer · CC BY-SA 2.5",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Diode-closeup.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-cathode-stripe.f3579a19.webp"
      },
      "uid": "1oxalqv1x650e9"
    },
    {
      "id": "ht-l08-f-forward-drop",
      "shape": "fact",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Diode Forward Voltage Drop",
      "body": "A diode's **forward voltage drop** is lower in some diode types than in others.",
      "illustration": {
        "imagePrompt": "Schottky diodes of several sizes: small signal diodes, axial-lead rectifiers and two large power packages.",
        "imageSearchTerm": "diode",
        "alt": "Schottky diodes of several sizes: small signal diodes, axial-lead rectifiers and two large power packages.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Steffen Maisch · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Schottky.jpg",
        "subject": "Schottky diodes of several sizes: small signal diodes, axial-lead rectifiers and two large power packages.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-forward-drop.a461ec5f.webp"
      },
      "uid": "1mhz748uphwe"
    },
    {
      "id": "ht-l08-f-led-forward",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Lights an LED",
      "body": "Forward current is what causes a **light-emitting diode (LED)** to emit light.",
      "illustration": {
        "imagePrompt": "A small red LED glowing on a breadboard in a dim room.",
        "imageSearchTerm": "glowing LED on breadboard",
        "alt": "A lit light-emitting diode (LED) on a breadboard.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Afrank99 · CC BY-SA 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Verschiedene_LEDs.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-led-forward.ce6774ff.webp"
      },
      "uid": "16kzuy313nhxsr"
    },
    {
      "id": "ht-l08-f-three-regions",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Three Regions of Semiconductor",
      "body": "A **transistor** is a component that can consist of three regions of semiconductor material.",
      "illustration": {
        "imagePrompt": "A close photo of a small black three-legged transistor on a circuit board.",
        "imageSearchTerm": "transistor three leads circuit board",
        "alt": "A small three-lead transistor on a circuit board",
        "kind": "photo",
        "credit": "Wikimedia Commons · Retired electrician · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:BD135-10-Fullpak_bipolar_transistor_01.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-three-regions.d5bba201.webp"
      },
      "uid": "9htdk61j4hkza"
    },
    {
      "id": "ht-l08-f-three-regions-hero",
      "shape": "fact",
      "title": "Inside a Transistor",
      "body": "A transistor is a component that can consist of three regions of semiconductor material.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A close photo of a small black three-legged transistor on a circuit board.",
        "imageSearchTerm": "transistor three leads circuit board",
        "alt": "A small three-lead transistor on a circuit board",
        "kind": "photo",
        "credit": "Wikimedia Commons · Retired electrician · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:BD135-10-Fullpak_bipolar_transistor_01.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-three-regions.d5bba201.webp"
      },
      "uid": "81tygb1bnaxmx"
    },
    {
      "id": "ht-l08-f-transistor-switch",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Transistor as Electronic Switch",
      "body": "A transistor can be used as an **electronic switch**.",
      "illustration": {
        "imagePrompt": "Transistors in several package styles, from tiny surface-mount to large metal-can power types, with a 10 mm scale.",
        "imageSearchTerm": "power transistor",
        "alt": "Transistors in several package styles, from tiny surface-mount to large metal-can power types, with a 10 mm scale.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Ulfbastel · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Transbauformen.jpg",
        "subject": "Transistors in several package styles, from tiny surface-mount to large metal-can power types, with a 10 mm scale.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-transistor-switch.7a3320db.webp"
      },
      "uid": "1spay4o13mpc74"
    },
    {
      "id": "ht-l08-f-fet-electrodes",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Gate, Drain and Source",
      "body": "A **Field Effect Transistor (FET)** is the type that has a gate, a drain and a source.",
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Two columns, one for the bipolar junction transistor and one for the Field Effect Transistor (FET). Each column lists that type's three electrode names. No schematic symbols and no photographs.",
        "imageSearchTerm": "Transistor electrode names",
        "alt": "Transistor electrode names: emitter, base and collector for the bipolar junction transistor; gate, drain and source for the Field Effect Transistor (FET).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-fet-electrodes.d5cd8a95.webp"
      },
      "uid": "1gf8p7c1txsavw"
    },
    {
      "id": "ht-l08-f-fet-abbrev",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What FET Stands For",
      "body": "The abbreviation **FET** stands for Field Effect Transistor.",
      "illustration": {
        "imagePrompt": "Two power MOSFETs, a type of field-effect transistor, in flat surface-mount packages next to a matchstick for scale.",
        "imageSearchTerm": "MOSFET",
        "alt": "Two power MOSFETs, a type of field-effect transistor, in flat surface-mount packages next to a matchstick for scale.",
        "kind": "photo",
        "credit": "Wikimedia Commons · CyrilB~commonswiki · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:D2PAK.JPG",
        "subject": "Two power MOSFETs in D2PAK packages next to a matchstick for scale.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-fet-abbrev.363af034.webp"
      },
      "uid": "14woim1kyyzrn"
    },
    {
      "id": "ht-l08-f-bjt-electrodes",
      "shape": "fact",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Bipolar Transistor Electrodes",
      "body": "A **bipolar junction transistor** has the electrodes emitter, base and collector.",
      "illustration": {
        "imagePrompt": "A 2N3904 bipolar junction transistor with three leads (emitter, base, collector).",
        "imageSearchTerm": "bipolar junction transistor",
        "alt": "A 2N3904 bipolar junction transistor with three leads (emitter, base, collector).",
        "kind": "photo",
        "credit": "Wikimedia Commons · Windell Oskay · CC BY 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:2N3904.jpg",
        "subject": "A 2N3904 bipolar junction transistor with three leads (emitter, base, collector).",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-bjt-electrodes.446e53df.webp"
      },
      "uid": "cgncf730wi0r"
    },
    {
      "id": "ht-l08-f-power-gain",
      "shape": "fact",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Transistors Provide Power Gain",
      "body": "A transistor is a component that can provide **power gain**.",
      "uid": "lwngyv75w56f"
    },
    {
      "id": "ht-l08-f-gain-meaning",
      "shape": "fact",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Three Meanings of Gain",
      "body": "**Gain** compares an amplifier's output signal with its input signal. It can mean output voltage relative to input voltage, output current relative to input current, or output power relative to input power. Each is a meaning of gain.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A standard amplifier triangle in the center, pointing right. On the left, a small sine wave enters the input. On the right, a larger sine wave leaves the output, so signal flows left to right. Below the amplifier, three stacked rows each show a bracket from input to output stating one comparison: voltage, current and power.",
        "imageSearchTerm": "Gain: output compared with input",
        "alt": "Gain: output compared with input. Gain compares an amplifier's output signal with its input signal, as voltage, current or power.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l08-f-gain-meaning.99e050d0.webp"
      },
      "uid": "1kfhac81ptz1j2"
    },
    {
      "id": "ht-l08-q-stripe",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A stripe is printed near one end of a diode's package. What does it point out?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The anode lead"
        },
        {
          "modality": "text",
          "value": "The cathode lead"
        },
        {
          "modality": "text",
          "value": "The gate lead"
        },
        {
          "modality": "text",
          "value": "The collector lead"
        }
      ],
      "correctIndex": 1,
      "explanation": "The stripe marks the cathode end of a diode. A diode's electrodes are the anode and cathode, and gate and collector belong to transistors.",
      "uid": "5myaq16d9nr1"
    },
    {
      "id": "ht-l08-q-emitter-base",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A schematic shows a part with emitter, base and collector electrodes. What is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Field effect transistor (FET)"
        },
        {
          "modality": "text",
          "value": "Light-emitting diode (LED)"
        },
        {
          "modality": "text",
          "value": "Semiconductor diode"
        },
        {
          "modality": "text",
          "value": "Bipolar junction transistor"
        }
      ],
      "correctIndex": 3,
      "explanation": "Emitter, base and collector are the electrodes of a bipolar junction transistor. A Field Effect Transistor has a gate, drain and source, and a diode has an anode and cathode.",
      "uid": "1p4dw2r17jt6jl"
    },
    {
      "id": "ht-l08-q-switch-and-gain",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which one component can serve as an electronic switch and also provide power gain?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Transformer"
        },
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        }
      ],
      "correctIndex": 0,
      "explanation": "A transistor can act as an electronic switch and can provide power gain. A transformer and a resistor are not named for power gain, and a potentiometer is not an electronic switch.",
      "uid": "h1kxxeocdx44"
    },
    {
      "id": "ht-l08-q-gate-drain",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which electrode names belong to a Field Effect Transistor (FET)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Emitter, base, collector"
        },
        {
          "modality": "text",
          "value": "Anode, cathode, gate"
        },
        {
          "modality": "text",
          "value": "Gate, drain, source"
        },
        {
          "modality": "text",
          "value": "Signal, bias, power"
        }
      ],
      "correctIndex": 2,
      "explanation": "A Field Effect Transistor has a gate, a drain and a source. A bipolar junction transistor has an emitter, base and collector instead.",
      "uid": "mf7b3mws07cs"
    },
    {
      "id": "ht-l08-tf-led-reverse",
      "shape": "trueFalse",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A light-emitting diode (LED) gives off light when reverse current flows through it.",
      "isTrue": false,
      "why": "Forward current causes an LED to emit light. Reverse current does not.",
      "uid": "lu0l5iylciky"
    },
    {
      "id": "ht-l08-tf-forward-drop-defect",
      "shape": "trueFalse",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A diode's forward voltage drop is lower in some diode types than in others.",
      "isTrue": true,
      "why": "Forward voltage drop differs between diode types: it is lower in some types than in others.",
      "uid": "fho7kr1wowqnx"
    },
    {
      "id": "ht-l08-c-diode-one-way",
      "shape": "cloze",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Current can flow in only one direction through a ___.",
      "answer": "diode",
      "distractors": [
        "resistor",
        "fuse",
        "driven element"
      ],
      "explanation": "A diode allows current in only one direction. A resistor, a fuse and a driven element do not do this.",
      "uid": "1k12o1z16do56f"
    },
    {
      "id": "ht-l08-p-diode-electrodes",
      "shape": "pair",
      "tags": [
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Diode electrodes"
      },
      "sideB": {
        "modality": "text",
        "value": "Anode and cathode"
      },
      "uid": "1o2mhjh1silmj"
    },
    {
      "id": "ot-ht-l08-t6a01",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What electrical component opposes the flow of current in a DC circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Inductor"
        },
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Inverter"
        },
        {
          "modality": "text",
          "value": "Transformer"
        }
      ],
      "correctIndex": 1,
      "explanation": "A resistor opposes current flow in a direct current (DC) circuit. An inductor, an inverter and a transformer do not do this job.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "j9rgrwxl7t7o"
    },
    {
      "id": "ot-ht-l08-t6a02",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of component is often used as an adjustable volume control?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Fixed resistor"
        },
        {
          "modality": "text",
          "value": "Power resistor"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Transformer"
        }
      ],
      "correctIndex": 2,
      "explanation": "A potentiometer is the part often used as an adjustable volume control, because its resistance can be changed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1m1m4c8fiqs58"
    },
    {
      "id": "ot-ht-l08-t6a03",
      "shape": "mcq",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What electrical parameter is controlled by a potentiometer?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Inductance"
        },
        {
          "modality": "text",
          "value": "Resistance"
        },
        {
          "modality": "text",
          "value": "Capacitance"
        },
        {
          "modality": "text",
          "value": "Field strength"
        }
      ],
      "correctIndex": 1,
      "explanation": "A potentiometer controls resistance, not inductance, capacitance or field strength.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9qjwpa1u1skpc"
    },
    {
      "id": "ot-ht-l08-t6a04",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What electrical component stores energy in an electric field?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Inductor"
        },
        {
          "modality": "text",
          "value": "Diode"
        }
      ],
      "correctIndex": 1,
      "explanation": "A capacitor stores energy in an electric field. Resistors, inductors and diodes do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ag56yu19qekpi"
    },
    {
      "id": "ot-ht-l08-t6a05",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of electrical component consists of conductive surfaces separated by an insulator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Oscillator"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        }
      ],
      "correctIndex": 3,
      "explanation": "A capacitor is built from conductive surfaces separated by an insulator.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ytp9v11m2ns3f"
    },
    {
      "id": "ot-ht-l08-t6a06",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of electrical component stores energy in a magnetic field?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Inductor"
        },
        {
          "modality": "text",
          "value": "Diode"
        }
      ],
      "correctIndex": 2,
      "explanation": "An inductor stores energy in a magnetic field. Resistors, capacitors and diodes do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1kjyogd16xhl5z"
    },
    {
      "id": "ot-ht-l08-t6a07",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What electrical component is typically constructed as a coil of wire?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Diode"
        },
        {
          "modality": "text",
          "value": "Inductor"
        }
      ],
      "correctIndex": 3,
      "explanation": "An inductor is typically constructed as a coil of wire. Transistors, capacitors and diodes are not typically coils.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ael5ii1spzkq"
    },
    {
      "id": "ot-ht-l08-t6a08",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the function of an SPDT switch?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A single circuit is opened or closed"
        },
        {
          "modality": "text",
          "value": "Two circuits are opened or closed"
        },
        {
          "modality": "text",
          "value": "A single circuit is switched between one of two other circuits"
        },
        {
          "modality": "text",
          "value": "Two circuits are each switched between one of two other circuits"
        }
      ],
      "correctIndex": 2,
      "explanation": "A single-pole double-throw (SPDT) switch moves a single circuit between one of two other circuits. Simply opening or closing a circuit is a different switch type.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "14z1946vqy6w8"
    },
    {
      "id": "ot-ht-l08-t6a09",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of switch is represented by component 3 in figure T-2?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Single-pole single-throw"
        },
        {
          "modality": "text",
          "value": "Single-pole double-throw"
        },
        {
          "modality": "text",
          "value": "Double-pole single-throw"
        },
        {
          "modality": "text",
          "value": "Double-pole double-throw"
        }
      ],
      "correctIndex": 0,
      "explanation": "In figure T-2, component 3 is a single-pole single-throw switch, not a double-pole or double-throw type.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l08-t6a09.5984731e.webp"
      },
      "uid": "zgpcv41l8p8ki"
    },
    {
      "id": "ot-ht-l08-t6a10",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following battery chemistries is rechargeable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Nickel-metal hydride"
        },
        {
          "modality": "text",
          "value": "Lithium-ion"
        },
        {
          "modality": "text",
          "value": "Lead-acid"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Nickel-metal hydride, lithium-ion and lead-acid are all rechargeable, so all three choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9zgum0144fzri"
    },
    {
      "id": "ot-ht-l08-t6a11",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following battery chemistries is not rechargeable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Nickel-cadmium"
        },
        {
          "modality": "text",
          "value": "Carbon-zinc"
        },
        {
          "modality": "text",
          "value": "Lead-acid"
        },
        {
          "modality": "text",
          "value": "Lithium-ion"
        }
      ],
      "correctIndex": 1,
      "explanation": "Of these four, carbon-zinc is the chemistry that cannot be recharged. Nickel-cadmium, lead-acid and lithium-ion are rechargeable.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ape1tf8nazwd"
    },
    {
      "id": "ot-ht-l08-t6b01",
      "shape": "mcq",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is true about forward voltage drop in a diode?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It is lower in some diode types than in others"
        },
        {
          "modality": "text",
          "value": "It is proportional to peak inverse voltage"
        },
        {
          "modality": "text",
          "value": "It indicates that the diode is defective"
        },
        {
          "modality": "text",
          "value": "It has no impact on the voltage delivered to the load"
        }
      ],
      "correctIndex": 0,
      "explanation": "Forward voltage drop is lower in some diode types than in others. It does not mean the diode is defective.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "p5mokbk7if4n"
    },
    {
      "id": "ot-ht-l08-t6b02",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What electronic component allows current to flow in only one direction?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Fuse"
        },
        {
          "modality": "text",
          "value": "Diode"
        },
        {
          "modality": "text",
          "value": "Driven element"
        }
      ],
      "correctIndex": 2,
      "explanation": "A diode allows current to flow in only one direction. Resistors, fuses and driven elements do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "12yqefj14t1zfx"
    },
    {
      "id": "ot-ht-l08-t6b06",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is the cathode lead of a semiconductor diode often marked on the package?"
      },
      "options": [
        {
          "modality": "text",
          "value": "With the word \"cathode\""
        },
        {
          "modality": "text",
          "value": "With a stripe"
        },
        {
          "modality": "text",
          "value": "With the letter C"
        },
        {
          "modality": "text",
          "value": "With the letter K"
        }
      ],
      "correctIndex": 1,
      "explanation": "The cathode lead is often marked with a stripe, not the word cathode or the letter C or K.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lu4jucrkd4ns"
    },
    {
      "id": "ot-ht-l08-t6b09",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What are the names for the electrodes of a diode?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Plus and minus"
        },
        {
          "modality": "text",
          "value": "Source and drain"
        },
        {
          "modality": "text",
          "value": "Anode and cathode"
        },
        {
          "modality": "text",
          "value": "Gate and base"
        }
      ],
      "correctIndex": 2,
      "explanation": "A diode's electrodes are the anode and cathode. Plus and minus, source and drain, and gate and base are not diode electrode names.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "tru2xdh1xj4l"
    },
    {
      "id": "ot-ht-l08-t6b07",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What causes a light-emitting diode (LED) to emit light?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Forward current"
        },
        {
          "modality": "text",
          "value": "Reverse current"
        },
        {
          "modality": "text",
          "value": "Capacitively-coupled RF signal"
        },
        {
          "modality": "text",
          "value": "Inductively-coupled RF signal"
        }
      ],
      "correctIndex": 0,
      "explanation": "An LED is a diode that lights with forward current. Reverse current and radio frequency (RF) signals do not make it emit light.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1kx3pqu1hqcjd0"
    },
    {
      "id": "ot-ht-l08-t6b03",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of these components can be used as an electronic switch?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Varistor"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Thermistor"
        }
      ],
      "correctIndex": 2,
      "explanation": "A transistor can act as an electronic switch. Varistors, potentiometers and thermistors are not named for that job.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "fm3jhk1ngdrgc"
    },
    {
      "id": "ot-ht-l08-t6b04",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following components can consist of three regions of semiconductor material?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Alternator"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Triode"
        },
        {
          "modality": "text",
          "value": "Pentode"
        }
      ],
      "correctIndex": 1,
      "explanation": "A transistor can consist of three regions of semiconductor material. An alternator, triode and pentode are not described that way.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "16r2xgj1do6e6h"
    },
    {
      "id": "ot-ht-l08-t6b05",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of transistor has a gate, drain, and source?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Varistor"
        },
        {
          "modality": "text",
          "value": "Field-effect"
        },
        {
          "modality": "text",
          "value": "Hall-effect"
        },
        {
          "modality": "text",
          "value": "Bipolar junction"
        }
      ],
      "correctIndex": 1,
      "explanation": "The Field Effect Transistor has a gate, a drain and a source. A bipolar junction transistor has other electrode names.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ld681a1csmwji"
    },
    {
      "id": "ot-ht-l08-t6b08",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the abbreviation FET stand for?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Frequency Emission Transmitter"
        },
        {
          "modality": "text",
          "value": "Fast Electron Transistor"
        },
        {
          "modality": "text",
          "value": "Free Electron Transmitter"
        },
        {
          "modality": "text",
          "value": "Field Effect Transistor"
        }
      ],
      "correctIndex": 3,
      "explanation": "FET stands for Field Effect Transistor, not any of the transmitter or electron-based names.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "i8rsuk1t6hjyw"
    },
    {
      "id": "ot-ht-l08-t6b12",
      "shape": "mcq",
      "tags": [
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What are the names of the electrodes of a bipolar junction transistor?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Signal, bias, power"
        },
        {
          "modality": "text",
          "value": "Emitter, base, collector"
        },
        {
          "modality": "text",
          "value": "Input, output, supply"
        },
        {
          "modality": "text",
          "value": "Pole one, pole two, output"
        }
      ],
      "correctIndex": 1,
      "explanation": "A bipolar junction transistor has an emitter, base and collector. Signal, bias and power are not its electrode names.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13y3wry1lxlch8"
    },
    {
      "id": "ot-ht-l08-t6b10",
      "shape": "mcq",
      "tags": [
        "components",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can provide power gain?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transformer"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Reactor"
        },
        {
          "modality": "text",
          "value": "Resistor"
        }
      ],
      "correctIndex": 1,
      "explanation": "A transistor can provide power gain. A transformer, a reactor and a resistor are not named for that job.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "czr3we1n2yyeg"
    },
    {
      "id": "ot-ht-l08-t6b11",
      "shape": "mcq",
      "tags": [
        "electrical-principles",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the term gain mean in amplifiers?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The output signal voltage relative to the input signal voltage"
        },
        {
          "modality": "text",
          "value": "The output signal current relative to the input signal current"
        },
        {
          "modality": "text",
          "value": "The output signal power relative to the input signal power"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Gain can compare output to input voltage, current or power, so all three choices are correct meanings.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lzkthl02bn3"
    },
    {
      "id": "ht-l09-f-schematic",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A text-only chart grouped by figure. Each row gives a component number and its part name. No symbols are drawn.",
        "imageSearchTerm": "Parts in the Sample Figures",
        "alt": "Parts in the sample figures: a text chart, grouped by figure, giving each numbered component's part name.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-schematic.9a1d36d9.webp"
      },
      "title": "What a Schematic Is",
      "body": "An electrical diagram that uses standard component symbols is called a **schematic**. Each part is drawn with its own agreed symbol.",
      "uid": "1nazixb1aog3v9"
    },
    {
      "id": "ht-l09-f-connections",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Schematic Shows",
      "body": "A schematic accurately represents the **component connections**. Only the connections between the symbols can be trusted.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. Each shows the same simple circuit of a battery, a resistor and a lamp joined in one loop, drawn with standard schematic symbols. The battery is a pair of long and short parallel lines, the resistor is a zigzag, and the lamp is a circle with an X inside. In the left panel the loop is a compact square with short wires. In the right panel the same three parts sit in different positions with long, stretched wires, but each part connects to exactly the same neighbours. Mark the matching connection points in both panels with small dots. A caption between the panels says the connections are what match.",
        "imageSearchTerm": "Same Connections, Different Layout",
        "alt": "Same Connections, Different Layout. A schematic records which parts connect to which. It does not record wire lengths or how the parts look.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-connections.f38a6489.webp"
      },
      "uid": "17o6ui517vsqrr"
    },
    {
      "id": "ht-l09-f-resistor",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-resistor.3fcd4aec.webp"
      },
      "title": "Component 1 in Figure T-1",
      "body": "Figure T-1 is a simple circuit whose parts are numbered. Component 1 is a **resistor**.",
      "uid": "xackvvf0ao03"
    },
    {
      "id": "ht-l09-f-transistor-sym",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-transistor-sym.3fcd4aec.webp"
      },
      "title": "Component 2 in Figure T-1",
      "body": "In figure T-1, component 2 is a **transistor**. The resistor and the transistor are separate symbols with separate jobs.",
      "uid": "1meo4qehbtar8"
    },
    {
      "id": "ht-l09-f-lamp",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-lamp.3fcd4aec.webp"
      },
      "title": "Component 3 in Figure T-1",
      "body": "In figure T-1, component 3 is a **lamp**.",
      "uid": "15dm7ubhu40vj"
    },
    {
      "id": "ht-l09-f-battery",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-battery.3fcd4aec.webp"
      },
      "title": "Component 4 in Figure T-1",
      "body": "In figure T-1, component 4 is a **battery**.",
      "uid": "5pye6a11eoeck"
    },
    {
      "id": "ht-l09-f-capacitor",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-capacitor.5984731e.webp"
      },
      "title": "Component 6 in Figure T-2",
      "body": "Figure T-2 numbers its parts separately from figure T-1. In figure T-2, component 6 is a **capacitor**.",
      "uid": "1p8z4dq1fa8c12"
    },
    {
      "id": "ht-l09-f-led-sym",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-led-sym.5984731e.webp"
      },
      "title": "Component 8 in Figure T-2",
      "body": "In figure T-2, component 8 is a **light emitting diode** (LED).",
      "uid": "1msgr0fl6ozhr"
    },
    {
      "id": "ht-l09-f-varresistor",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-varresistor.5984731e.webp"
      },
      "title": "Component 9 in Figure T-2",
      "body": "In figure T-2, component 9 is a **variable resistor**.",
      "uid": "dq43nqgpe59s"
    },
    {
      "id": "ht-l09-f-transformer-sym",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-transformer-sym.5984731e.webp"
      },
      "title": "Component 4 in Figure T-2",
      "body": "In figure T-2, component 4 is a **transformer**.",
      "uid": "wlfx7c1i03heu"
    },
    {
      "id": "ht-l09-f-varinductor",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-varinductor.978a50e7.webp"
      },
      "title": "Component 3 in Figure T-3",
      "body": "In figure T-3, component 3 is a **variable inductor**.",
      "uid": "mtd6phcw8kfr"
    },
    {
      "id": "ht-l09-f-antenna",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-antenna.978a50e7.webp"
      },
      "title": "Component 4 in Figure T-3",
      "body": "In figure T-3, component 4 is an **antenna**. Component 4 is a different part in each of the three figures, so numbers only have meaning inside their own diagram.",
      "uid": "1hqyip142n7tz"
    },
    {
      "id": "ht-l09-q-shows",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A learner studies a schematic. Which thing can be trusted on the page?"
      },
      "options": [
        {
          "modality": "text",
          "value": "How the parts connect"
        },
        {
          "modality": "text",
          "value": "How long each wire is"
        },
        {
          "modality": "text",
          "value": "How each part looks"
        },
        {
          "modality": "text",
          "value": "How big each part is"
        }
      ],
      "correctIndex": 0,
      "explanation": "A schematic accurately shows component connections. Wire lengths and the physical appearance of parts are not accurately represented.",
      "uid": "15lzf1z18knzfr"
    },
    {
      "id": "ht-l09-q-variable",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-2, which numbered component is the variable resistor?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 6"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 9"
        },
        {
          "modality": "text",
          "value": "Component 8"
        }
      ],
      "correctIndex": 2,
      "explanation": "In figure T-2, component 9 is the variable resistor. Component 6 is a capacitor, 4 a transformer and 8 a light emitting diode.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-variable.5984731e.webp"
      },
      "uid": "147mhsqu233mi"
    },
    {
      "id": "ht-l09-q-numbers",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Component 4 is a battery in one figure and an antenna in another. Why?"
      },
      "options": [
        {
          "modality": "text",
          "value": "One figure contains an error"
        },
        {
          "modality": "text",
          "value": "Numbers fit one diagram only"
        },
        {
          "modality": "text",
          "value": "Both parts share one symbol"
        },
        {
          "modality": "text",
          "value": "Numbers show the wiring order"
        }
      ],
      "correctIndex": 1,
      "explanation": "Component numbers are labels inside one diagram only. The same number can name a different part in another figure.",
      "uid": "81ofd71wca5ax"
    },
    {
      "id": "ht-l09-q-led-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A learner must find the light-emitting diode (LED) in figure T-2. Which numbered component is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 6"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 9"
        },
        {
          "modality": "text",
          "value": "Component 8"
        }
      ],
      "correctIndex": 3,
      "explanation": "In figure T-2, component 8 is the light emitting diode. Component 6 is a capacitor, 4 a transformer and 9 a variable resistor.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-led-find.5984731e.webp"
      },
      "uid": "10odiss165qfik"
    },
    {
      "id": "ht-l09-tf-appearance",
      "shape": "trueFalse",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A schematic accurately shows what each component physically looks like.",
      "isTrue": false,
      "why": "A schematic accurately shows component connections, not the physical appearance of the parts or the wire lengths.",
      "uid": "7rvgt512a20u9"
    },
    {
      "id": "ht-l09-q-antenna-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-3, which numbered component is the antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 1"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 2"
        },
        {
          "modality": "text",
          "value": "Component 3"
        }
      ],
      "correctIndex": 1,
      "explanation": "In figure T-3, component 4 is the antenna. Component 3 is the variable inductor.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-antenna-find.978a50e7.webp"
      },
      "uid": "l68dnll3g3fp"
    },
    {
      "id": "ht-l09-q-lamp-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-1, which numbered component is the lamp?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 2"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 3"
        },
        {
          "modality": "text",
          "value": "Component 1"
        }
      ],
      "correctIndex": 2,
      "explanation": "In figure T-1, component 3 is the lamp. Component 1 is the resistor, 2 the transistor and 4 the battery.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-lamp-find.3fcd4aec.webp"
      },
      "uid": "14wedp5tw2ybr"
    },
    {
      "id": "ht-l09-q-varinductor-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-3, which numbered component is the variable inductor?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 1"
        },
        {
          "modality": "text",
          "value": "Component 3"
        },
        {
          "modality": "text",
          "value": "Component 2"
        }
      ],
      "correctIndex": 2,
      "explanation": "In figure T-3, component 3 is the variable inductor. Component 4 is the antenna.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-varinductor-find.978a50e7.webp"
      },
      "uid": "1uox7xz1kmn78f"
    },
    {
      "id": "ht-l09-f-rectifier",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A two-column text chart. The left column names each part. The right column gives that part's job in a short phrase. Each row holds one part and one job, with no arrows between rows.",
        "imageSearchTerm": "What Each Part Does",
        "alt": "What each part does: a two-column chart pairing each part with its job in a circuit.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-rectifier.5f3f5bc4.webp"
      },
      "title": "Rectifier Changes AC to DC",
      "body": "A **rectifier** changes alternating current (AC) into a varying direct current (DC) signal.",
      "uid": "71w7cj1sj5iwl"
    },
    {
      "id": "ht-l09-f-transformer",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Transformer Lowers AC Voltage",
      "body": "A **transformer** changes 120 V alternating current (AC) to a lower AC voltage for other uses. The output is still AC.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Draw the standard transformer symbol in the center: two coils side by side, each a row of loops, with two parallel straight lines between them for the core. On the left, an input arrow points into the first coil, carrying a tall sine wave. On the right, an output arrow points away from the second coil, carrying a shorter sine wave of the same shape. The shorter wave shows a lower voltage that is still alternating.",
        "imageSearchTerm": "Transformer: AC In, Lower AC Out",
        "alt": "A transformer with 120 volts alternating current (AC) in and a lower AC voltage out: the output is still AC.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-transformer.c6c8487e.webp"
      },
      "uid": "1u0fmrch6cz3e"
    },
    {
      "id": "ht-l09-f-regulator",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Regulator Controls Voltage",
      "body": "A **regulator** is the type of circuit that controls the amount of voltage from a power supply.",
      "illustration": {
        "imagePrompt": "A 7809 three-terminal voltage regulator chip in a black plastic package with a metal tab, lying on a pale surface.",
        "imageSearchTerm": "7805 voltage regulator",
        "alt": "A 7809 three-terminal voltage regulator chip in a black plastic package with a metal tab, lying on a pale surface.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Retired electrician · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:7809_(OnSemi)_01.jpg",
        "subject": "A 7809 three-terminal voltage regulator IC in a black plastic TO-220 package, lying on a pale surface.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-regulator.7344b1cd.webp"
      },
      "uid": "1uddbjs852u1y"
    },
    {
      "id": "ht-l09-f-regulator-hero",
      "shape": "fact",
      "title": "Controlling Voltage",
      "body": "A regulator is the type of circuit that controls the amount of voltage from a power supply.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "circuits",
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A 7809 three-terminal voltage regulator chip in a black plastic package with a metal tab, lying on a pale surface.",
        "imageSearchTerm": "7805 voltage regulator",
        "alt": "A 7809 three-terminal voltage regulator chip in a black plastic package with a metal tab, lying on a pale surface.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Retired electrician · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:7809_(OnSemi)_01.jpg",
        "subject": "A 7809 three-terminal voltage regulator IC in a black plastic TO-220 package, lying on a pale surface.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-regulator.7344b1cd.webp"
      },
      "uid": "so20mmw9naey"
    },
    {
      "id": "ht-l09-f-relay",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Relay Is a Switch",
      "body": "A **relay** is an electrically-controlled switch.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Draw a relay in standard schematic form. On the left is a coil, drawn as a row of loops inside a rectangle, with two control wires leading in. On the right is a single switch drawn as a hinged contact. A dashed line runs from the coil to the switch arm to show that the coil moves it. Draw two small states side by side: with no control signal the switch is open, and with the control signal applied the switch is closed. A separate circuit passes through the switch contacts.",
        "imageSearchTerm": "A Relay Is an Electrically-Controlled Switch",
        "alt": "A Relay Is an Electrically-Controlled Switch. A relay is a switch that an electrical control signal opens or closes, instead of a hand.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-relay.2d0bd78b.webp"
      },
      "uid": "1sw186iqr2hfy"
    },
    {
      "id": "ht-l09-f-transistor-fn",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-transistor-fn.3fcd4aec.webp"
      },
      "title": "Function of a Transistor",
      "body": "A **transistor** controls the flow of current. That is the function of component 2 in figure T-1.",
      "uid": "alrzen4j8yox"
    },
    {
      "id": "ht-l09-f-meter",
      "shape": "fact",
      "tags": [
        "components",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Meter Shows a Number",
      "body": "A **meter** displays an electrical quantity as a numeric value.",
      "uid": "16vf40ibqv3k"
    },
    {
      "id": "ht-l09-f-led-ind",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "LED as Visual Indicator",
      "body": "A light-emitting diode (LED) is the part commonly used as a visual indicator.",
      "illustration": {
        "imagePrompt": "Three lit 5-millimeter light-emitting diodes (LEDs) in red, green and blue, glowing against a black background.",
        "imageSearchTerm": "light-emitting diode LED",
        "alt": "Three lit 5-millimeter light-emitting diodes (LEDs) in red, green and blue, glowing against a black background.",
        "kind": "photo",
        "credit": "Wikimedia Commons · PiccoloNamek · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:RBG-LED.jpg",
        "subject": "Three lit 5 mm LEDs (red, green, blue) glowing against a black background.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-led-ind.97e5cc48.webp"
      },
      "uid": "1xbqb512wdzdp"
    },
    {
      "id": "ht-l09-f-led-ind-hero",
      "shape": "fact",
      "title": "A Visual Indicator",
      "body": "A light-emitting diode (LED) is the part commonly used as a visual indicator.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "components",
        "circuits"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "Three lit 5-millimeter light-emitting diodes (LEDs) in red, green and blue, glowing against a black background.",
        "imageSearchTerm": "light-emitting diode LED",
        "alt": "Three lit 5-millimeter light-emitting diodes (LEDs) in red, green and blue, glowing against a black background.",
        "kind": "photo",
        "credit": "Wikimedia Commons · PiccoloNamek · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:RBG-LED.jpg",
        "subject": "Three lit 5 mm LEDs (red, green, blue) glowing against a black background.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-led-ind.97e5cc48.webp"
      },
      "uid": "tbd7gt19ytr9r"
    },
    {
      "id": "ht-l09-f-ic",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Integrated Circuit Defined",
      "body": "An **integrated circuit** is a device that combines several semiconductors and other components into one package.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Draw a large rectangle as a chip package, with a row of short pins along the top and bottom edges. Inside it, place a cut-away view of several small schematic symbols joined by thin lines. Include two transistors (each a circle with base, collector and emitter leads), a diode (a triangle against a bar) and a resistor (a zigzag). An arrow from these loose symbols points into the single package, showing that they combine into one part.",
        "imageSearchTerm": "Many Parts in One Package",
        "alt": "Many Parts in One Package. An integrated circuit holds several semiconductors and other components in a single package.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-ic.8cefaf8f.webp"
      },
      "uid": "rbetkntvu2lp"
    },
    {
      "id": "ht-l09-f-cap-tuned",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Capacitor Pairs With Inductor",
      "body": "A **capacitor** is the part combined with an inductor to make a resonant circuit.",
      "uid": "1wo07kz883l3v"
    },
    {
      "id": "ht-l09-f-resonant",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Resonant Circuit Is",
      "body": "A **resonant circuit**, also called a tuned circuit, is made from an inductor and a capacitor in series or parallel.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. On the left, the series form: an inductor (a row of loops) and a capacitor (two parallel plates) joined end to end in one line between two terminals. On the right, the parallel form: the same inductor and capacitor joined across each other between the same two terminals, each on its own branch. Use the standard symbols in both panels.",
        "imageSearchTerm": "Two Ways to Build a Tuned Circuit",
        "alt": "Two Ways to Build a Tuned Circuit. A resonant (tuned) circuit is an inductor and a capacitor, connected either in series or in parallel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-resonant.3367aa93.webp"
      },
      "uid": "163ta4c34sb50"
    },
    {
      "id": "ht-l09-f-shield",
      "shape": "fact",
      "tags": [
        "components",
        "interference"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Use Shielded Wire",
      "body": "**Shielded wire** is used to prevent coupling of unwanted signals to or from the wire.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Draw a short length of wire, cut away to show a center conductor with a surrounding shield layer. Outside the wire, wavy arrows representing unwanted signals approach the wire and stop at the shield. From the center conductor, wavy arrows head outward and also stop at the shield. Small stop marks show where each set of arrows is blocked at the shield.",
        "imageSearchTerm": "Shield Blocks Unwanted Signals Both Ways",
        "alt": "Shield Blocks Unwanted Signals Both Ways. Shielded wire stops unwanted signals from coupling into the wire and from coupling out of it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-f-shield.708c4511.webp"
      },
      "uid": "1ffwu9g100c8dm"
    },
    {
      "id": "ht-l09-q-lower-ac",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A small power supply must first lower 120 V alternating current (AC) to a smaller AC voltage. Which part does this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Rectifier"
        },
        {
          "modality": "text",
          "value": "Regulator"
        },
        {
          "modality": "text",
          "value": "Relay switch"
        },
        {
          "modality": "text",
          "value": "Transformer"
        }
      ],
      "correctIndex": 3,
      "explanation": "A transformer lowers AC voltage and the output stays AC. A rectifier changes AC to varying direct current (DC), and a regulator controls the voltage.",
      "uid": "13r5zfnji7ny9"
    },
    {
      "id": "ht-l09-q-shield",
      "shape": "mcq",
      "tags": [
        "components",
        "interference"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A builder wants a signal lead that blocks unwanted signals from coupling in or out. Which wire fits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Heavy-duty wire"
        },
        {
          "modality": "text",
          "value": "Shielded wire"
        },
        {
          "modality": "text",
          "value": "Thin hookup wire"
        },
        {
          "modality": "text",
          "value": "Low-loss wire"
        }
      ],
      "correctIndex": 1,
      "explanation": "Shielding prevents coupling of unwanted signals to or from the wire. It does not add current capability or lower direct current (DC) resistance.",
      "uid": "mw34uu1vrqyve"
    },
    {
      "id": "ht-l09-q-relay",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A project needs a switch that opens and closes under electrical control. Which part is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Meter display"
        },
        {
          "modality": "text",
          "value": "Rectifier circuit"
        },
        {
          "modality": "text",
          "value": "Light-emitting diode"
        },
        {
          "modality": "text",
          "value": "Electrical relay"
        }
      ],
      "correctIndex": 3,
      "explanation": "A relay is an electrically-controlled switch. A meter shows a value, a rectifier changes alternating current (AC) to direct current (DC) and a light-emitting diode indicates.",
      "uid": "13nznoxmuy4m3"
    },
    {
      "id": "ht-l09-q-tuned",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which pair of parts makes a tuned circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A resistor and a transistor"
        },
        {
          "modality": "text",
          "value": "An inductor and a capacitor"
        },
        {
          "modality": "text",
          "value": "An inductor and a resistor"
        },
        {
          "modality": "text",
          "value": "A capacitor and a potentiometer"
        }
      ],
      "correctIndex": 1,
      "explanation": "A tuned circuit is an inductor and a capacitor in series or parallel. Pairings that use a resistor, transistor or potentiometer in place of the inductor or capacitor do not make a tuned circuit.",
      "uid": "1syyx8z1mjfion"
    },
    {
      "id": "ht-l09-tf-rectifier",
      "shape": "trueFalse",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A rectifier changes alternating current into a varying direct current signal.",
      "isTrue": true,
      "why": "Changing alternating current (AC) into varying direct current (DC) is the rectifier's job. A transformer only changes the AC voltage.",
      "uid": "1wdpei4muyfzy"
    },
    {
      "id": "ht-l09-tf-shield",
      "shape": "trueFalse",
      "tags": [
        "components",
        "interference"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Shielded wire is used to increase the current the wire can carry.",
      "isTrue": false,
      "why": "Shielding prevents coupling of unwanted signals to or from the wire. It does not increase current carrying capability.",
      "uid": "507bhvwikp0z"
    },
    {
      "id": "ht-l09-c-regulator",
      "shape": "cloze",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A regulator controls the amount of ___ from a power supply.",
      "answer": "voltage",
      "distractors": [
        "frequency",
        "resistance",
        "wavelength"
      ],
      "explanation": "A regulator is the circuit that controls the amount of voltage a power supply delivers.",
      "uid": "18d8mb21qxbhz2"
    },
    {
      "id": "ht-l09-p-ic",
      "shape": "pair",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Integrated circuit"
      },
      "sideB": {
        "modality": "text",
        "value": "Many parts in one package"
      },
      "uid": "1baovimf9bkzs"
    },
    {
      "id": "ht-l09-q-transistor-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-1, which numbered component is the transistor?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 3"
        },
        {
          "modality": "text",
          "value": "Component 1"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 2"
        }
      ],
      "correctIndex": 3,
      "explanation": "In figure T-1, component 2 is the transistor. Component 1 is the resistor, 3 the lamp and 4 the battery.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-transistor-find.3fcd4aec.webp"
      },
      "uid": "1rt8emxa2noej"
    },
    {
      "id": "ht-l09-q-transformer-find",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "In figure T-2, which numbered component is the transformer?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Component 6"
        },
        {
          "modality": "text",
          "value": "Component 4"
        },
        {
          "modality": "text",
          "value": "Component 9"
        },
        {
          "modality": "text",
          "value": "Component 8"
        }
      ],
      "correctIndex": 1,
      "explanation": "In figure T-2, component 4 is the transformer. Component 6 is a capacitor, 8 a light emitting diode and 9 a variable resistor.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l09-q-transformer-find.5984731e.webp"
      },
      "uid": "1u678l31kysbw3"
    },
    {
      "id": "ht-l09-c-meter",
      "shape": "cloze",
      "tags": [
        "components",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A ___ displays an electrical quantity as a numeric value.",
      "answer": "meter",
      "distractors": [
        "potentiometer",
        "transistor",
        "relay"
      ],
      "explanation": "A meter displays an electrical quantity as a numeric value. A potentiometer, a transistor and a relay do not.",
      "uid": "diiy8tif5tfd"
    },
    {
      "id": "ht-l09-tf-transistor",
      "shape": "trueFalse",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A transistor gives off light when current flows through it.",
      "isTrue": false,
      "why": "A transistor controls the flow of current. It does not give off light, supply energy or make radio waves.",
      "uid": "9kku242v8x04"
    },
    {
      "id": "ht-l09-q-led-ind",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A builder wants a part to show that power is on. Which is commonly used as a visual indicator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Field effect transistor"
        },
        {
          "modality": "text",
          "value": "Zener diode"
        },
        {
          "modality": "text",
          "value": "Light-emitting diode"
        },
        {
          "modality": "text",
          "value": "Electrical relay"
        }
      ],
      "correctIndex": 2,
      "explanation": "A light-emitting diode (LED) is commonly used as a visual indicator. A field effect transistor (FET) and a Zener diode are not.",
      "uid": "hm8p58wzzq0q"
    },
    {
      "id": "ot-ht-l09-t6c01",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an electrical diagram using standard component symbols called?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Connection chart"
        },
        {
          "modality": "text",
          "value": "Instrumentation system"
        },
        {
          "modality": "text",
          "value": "Schematic"
        },
        {
          "modality": "text",
          "value": "Flow chart"
        }
      ],
      "correctIndex": 2,
      "explanation": "A diagram using standard component symbols is a schematic, not a connection chart, instrumentation system or flow chart.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "3ijv8914ric9d"
    },
    {
      "id": "ot-ht-l09-t6c12",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is accurately represented in electrical schematics?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Wire lengths"
        },
        {
          "modality": "text",
          "value": "Physical appearance of components"
        },
        {
          "modality": "text",
          "value": "Component connections"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "A schematic accurately represents component connections, not wire lengths or physical appearance.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "4ugirys256la"
    },
    {
      "id": "ot-ht-l09-t6c02",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 1 in figure T-1?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Battery"
        },
        {
          "modality": "text",
          "value": "Connector"
        }
      ],
      "correctIndex": 0,
      "explanation": "Component 1 in figure T-1 is a resistor.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c02.3fcd4aec.webp"
      },
      "uid": "1dacquo1pnsxpi"
    },
    {
      "id": "ot-ht-l09-t6c03",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 2 in figure T-1?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Indicator lamp"
        },
        {
          "modality": "text",
          "value": "Connector"
        }
      ],
      "correctIndex": 1,
      "explanation": "Component 2 in figure T-1 is a transistor.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c03.3fcd4aec.webp"
      },
      "uid": "178k11e6jqr4u"
    },
    {
      "id": "ot-ht-l09-t6c04",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 3 in figure T-1?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Lamp"
        },
        {
          "modality": "text",
          "value": "Ground symbol"
        }
      ],
      "correctIndex": 2,
      "explanation": "Component 3 in figure T-1 is a lamp.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c04.3fcd4aec.webp"
      },
      "uid": "f702ylnjfmzd"
    },
    {
      "id": "ot-ht-l09-t6c05",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 4 in figure T-1?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Ground symbol"
        },
        {
          "modality": "text",
          "value": "Battery"
        }
      ],
      "correctIndex": 3,
      "explanation": "Component 4 in figure T-1 is a battery.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c05.3fcd4aec.webp"
      },
      "uid": "1n14jt2185pr64"
    },
    {
      "id": "ot-ht-l09-t6c06",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 6 in figure T-2?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        },
        {
          "modality": "text",
          "value": "Regulator IC"
        },
        {
          "modality": "text",
          "value": "Transistor"
        }
      ],
      "correctIndex": 1,
      "explanation": "Component 6 in figure T-2 is a capacitor. IC stands for integrated circuit.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c06.5984731e.webp"
      },
      "uid": "hnaq24a8mdr8"
    },
    {
      "id": "ot-ht-l09-t6c07",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 8 in figure T-2?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Inductor"
        },
        {
          "modality": "text",
          "value": "Regulator IC"
        },
        {
          "modality": "text",
          "value": "Light emitting diode"
        }
      ],
      "correctIndex": 3,
      "explanation": "Component 8 in figure T-2 is a light emitting diode. IC stands for integrated circuit.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c07.5984731e.webp"
      },
      "uid": "rowl7j14xzmit"
    },
    {
      "id": "ot-ht-l09-t6c08",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 9 in figure T-2?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Variable capacitor"
        },
        {
          "modality": "text",
          "value": "Variable inductor"
        },
        {
          "modality": "text",
          "value": "Variable resistor"
        },
        {
          "modality": "text",
          "value": "Variable transformer"
        }
      ],
      "correctIndex": 2,
      "explanation": "Component 9 in figure T-2 is a variable resistor.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c08.5984731e.webp"
      },
      "uid": "wwbyl1l5o66b"
    },
    {
      "id": "ot-ht-l09-t6c09",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 4 in figure T-2?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Variable inductor"
        },
        {
          "modality": "text",
          "value": "Double-pole switch"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Transformer"
        }
      ],
      "correctIndex": 3,
      "explanation": "Component 4 in figure T-2 is a transformer.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-2 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-2",
        "alt": "Exam figure T-2: a circuit schematic with ten numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c09.5984731e.webp"
      },
      "uid": "ux6y5pu5jqo5"
    },
    {
      "id": "ot-ht-l09-t6c10",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 3 in figure T-3?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Connector"
        },
        {
          "modality": "text",
          "value": "Meter"
        },
        {
          "modality": "text",
          "value": "Variable capacitor"
        },
        {
          "modality": "text",
          "value": "Variable inductor"
        }
      ],
      "correctIndex": 3,
      "explanation": "Component 3 in figure T-3 is a variable inductor.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c10.978a50e7.webp"
      },
      "uid": "1ymczu9efzn9h"
    },
    {
      "id": "ot-ht-l09-t6c11",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is component 4 in figure T-3?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Antenna"
        },
        {
          "modality": "text",
          "value": "Transmitter"
        },
        {
          "modality": "text",
          "value": "Dummy load"
        },
        {
          "modality": "text",
          "value": "Ground"
        }
      ],
      "correctIndex": 0,
      "explanation": "Component 4 in figure T-3 is an antenna.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-3 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-3",
        "alt": "Exam figure T-3: a circuit schematic with four numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6c11.978a50e7.webp"
      },
      "uid": "1sfo6p01o7n22"
    },
    {
      "id": "ot-ht-l09-t6d01",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following devices or circuits changes an alternating current into a varying direct current signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transformer"
        },
        {
          "modality": "text",
          "value": "Rectifier"
        },
        {
          "modality": "text",
          "value": "Amplifier"
        },
        {
          "modality": "text",
          "value": "Reflector"
        }
      ],
      "correctIndex": 1,
      "explanation": "A rectifier changes alternating current (AC) into varying direct current (DC); a transformer only changes the AC voltage.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ndhy9eg2mxiy"
    },
    {
      "id": "ot-ht-l09-t6d06",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What component changes 120 V AC power to a lower AC voltage for other uses?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Variable capacitor"
        },
        {
          "modality": "text",
          "value": "Transformer"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Diode"
        }
      ],
      "correctIndex": 1,
      "explanation": "A transformer changes 120 V alternating current (AC) to a lower AC voltage.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1gi3lin1ikgc6z"
    },
    {
      "id": "ot-ht-l09-t6d02",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a relay?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An electrically-controlled switch"
        },
        {
          "modality": "text",
          "value": "A current-controlled amplifier"
        },
        {
          "modality": "text",
          "value": "An inverting amplifier"
        },
        {
          "modality": "text",
          "value": "A pass transistor"
        }
      ],
      "correctIndex": 0,
      "explanation": "A relay is an electrically-controlled switch, not an amplifier or pass transistor.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1il5qmb1eicvot"
    },
    {
      "id": "ot-ht-l09-t6d05",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of circuit controls the amount of voltage from a power supply?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Regulator"
        },
        {
          "modality": "text",
          "value": "Oscillator"
        },
        {
          "modality": "text",
          "value": "Filter"
        },
        {
          "modality": "text",
          "value": "Phase inverter"
        }
      ],
      "correctIndex": 0,
      "explanation": "A regulator controls the amount of voltage from a power supply.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nfa3glmjy7it"
    },
    {
      "id": "ot-ht-l09-t6d04",
      "shape": "mcq",
      "tags": [
        "components",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following displays an electrical quantity as a numeric value?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Transistor"
        },
        {
          "modality": "text",
          "value": "Meter"
        },
        {
          "modality": "text",
          "value": "Relay"
        }
      ],
      "correctIndex": 2,
      "explanation": "A meter displays an electrical quantity as a numeric value.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "w18lb38tx5bb"
    },
    {
      "id": "ot-ht-l09-t6d10",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the function of component 2 in figure T-1?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Give off light when current flows through it"
        },
        {
          "modality": "text",
          "value": "Supply electrical energy"
        },
        {
          "modality": "text",
          "value": "Control the flow of current"
        },
        {
          "modality": "text",
          "value": "Convert electrical energy into radio waves"
        }
      ],
      "correctIndex": 2,
      "explanation": "A transistor controls the flow of current; it does not light up, supply energy or make radio waves.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "Figure T-1 from the NCVEC 2026–2030 Technician question pool, reproduced as published",
        "imageSearchTerm": "NCVEC figure T-1",
        "alt": "Exam figure T-1: a circuit schematic with five numbered components",
        "credit": "NCVEC Question Pool Committee · Public domain",
        "creditUrl": "https://ncvec.org/index.php/2026-2030-technician-question-pool",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ot-ht-l09-t6d10.3fcd4aec.webp"
      },
      "uid": "1bqdht21bcyzh2"
    },
    {
      "id": "ot-ht-l09-t6d08",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is combined with an inductor to make a resonant circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistor"
        },
        {
          "modality": "text",
          "value": "Zener diode"
        },
        {
          "modality": "text",
          "value": "Potentiometer"
        },
        {
          "modality": "text",
          "value": "Capacitor"
        }
      ],
      "correctIndex": 3,
      "explanation": "A capacitor is combined with an inductor to make a resonant circuit.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ichyyy3myijg"
    },
    {
      "id": "ot-ht-l09-t6d11",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a resonant or tuned circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An inductor and a capacitor in series or parallel"
        },
        {
          "modality": "text",
          "value": "A linear voltage regulator"
        },
        {
          "modality": "text",
          "value": "A resistor circuit used for reducing standing wave ratio"
        },
        {
          "modality": "text",
          "value": "A circuit designed to provide high-fidelity audio"
        }
      ],
      "correctIndex": 0,
      "explanation": "A tuned circuit is an inductor and a capacitor in series or parallel.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1m13d4k1ejz5e"
    },
    {
      "id": "ot-ht-l09-t6d03",
      "shape": "mcq",
      "tags": [
        "components",
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a reason to use shielded wire?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To decrease the resistance of DC power connections"
        },
        {
          "modality": "text",
          "value": "To increase the current carrying capability of the wire"
        },
        {
          "modality": "text",
          "value": "To prevent coupling of unwanted signals to or from the wire"
        },
        {
          "modality": "text",
          "value": "To reduce receiver overload"
        }
      ],
      "correctIndex": 2,
      "explanation": "Shielded wire prevents coupling of unwanted signals to or from the wire. DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1947vi71rzw4qv"
    },
    {
      "id": "ot-ht-l09-t6d07",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is commonly used as a visual indicator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "LED"
        },
        {
          "modality": "text",
          "value": "FET"
        },
        {
          "modality": "text",
          "value": "Zener diode"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "A light-emitting diode (LED) is commonly used as a visual indicator; a field effect transistor (FET) and a Zener diode are not, so \"all correct\" is wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1yflscvbs9wm5"
    },
    {
      "id": "ot-ht-l09-t6d09",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the name of a device that combines several semiconductors and other components into one package?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Transducer"
        },
        {
          "modality": "text",
          "value": "Multi-pole relay"
        },
        {
          "modality": "text",
          "value": "Integrated circuit"
        },
        {
          "modality": "text",
          "value": "Transformer"
        }
      ],
      "correctIndex": 2,
      "explanation": "An integrated circuit combines several semiconductors and other components into one package.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "oqc5ns1vt67rg"
    },
    {
      "id": "ht-l10-f-sensitivity",
      "shape": "fact",
      "tags": [
        "circuits",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Two columns. The left column is sensitivity: the receiver's ability to detect that a signal is present. The right column is selectivity: the receiver's ability to discriminate between multiple signals, picking one signal out from several. Each column has a single line of plain text under its heading. No other terms appear.",
        "imageSearchTerm": "Sensitivity and Selectivity Side by Side",
        "alt": "Sensitivity and selectivity side by side: sensitivity detects the presence of a signal; selectivity picks one signal out from several.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-sensitivity.9794c842.webp"
      },
      "title": "Sensitivity: Detecting a Signal",
      "body": "**Sensitivity** is the ability of a receiver to detect the presence of a signal.",
      "uid": "11jf65q1w2ilns"
    },
    {
      "id": "ht-l10-f-selectivity",
      "shape": "fact",
      "tags": [
        "circuits",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Selectivity: Telling Signals Apart",
      "body": "**Selectivity** is the ability of a receiver to discriminate between multiple signals. It means picking out one signal from among several. It is a different property from sensitivity.",
      "uid": "y5vj4d2s4vrn"
    },
    {
      "id": "ht-l10-f-mixer",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Mixer Changes Frequency",
      "body": "A **mixer** converts a signal from one frequency to another.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right signal path. On the left, a sine wave with wide spacing between peaks, followed by an arrow into a central rectangular block. On the right, an arrow leaves the block and a sine wave with clearly tighter peak spacing follows it, so the two frequencies look visibly different. Signal flow runs left to right only. Place one caption line under the whole path.",
        "imageSearchTerm": "A mixer changes a signal's frequency",
        "alt": "A mixer changes a signal's frequency. A mixer takes in a signal at one frequency and puts out the signal at a different frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-mixer.42d60a30.webp"
      },
      "uid": "16bfy5o1qo979y"
    },
    {
      "id": "ht-l10-f-oscillator",
      "shape": "fact",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Oscillator Makes a Frequency",
      "body": "An **oscillator** is a circuit that generates a signal at a specific frequency.",
      "uid": "18po6xactb0s"
    },
    {
      "id": "ht-l10-f-vfo",
      "shape": "fact",
      "tags": [
        "circuits",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What the VFO Does",
      "body": "The **variable frequency oscillator (VFO)** in a transceiver sets the receive and transmit frequency.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A large rounded rectangle for the transceiver. Inside it, two blocks side by side: a receiver block and a transmitter block. Below them, a third block for the variable frequency oscillator. One arrow runs from the oscillator up to the receiver block and a second arrow runs up to the transmitter block. Each arrow carries a small sine-wave icon to show the oscillator's generated signal. Place the label for the whole transceiver on its outline.",
        "imageSearchTerm": "The VFO sets receive and transmit frequency",
        "alt": "Inside a transceiver, the variable frequency oscillator (VFO) sets both the receive frequency and the transmit frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-vfo.e24522fc.webp"
      },
      "uid": "xxn1h61fjc80m"
    },
    {
      "id": "ht-l10-f-modulation",
      "shape": "fact",
      "tags": [
        "modulation",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Modulation Puts Speech on a Carrier",
      "body": "**Modulation** is combining speech with a radio frequency (RF) carrier signal.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two input lines on the left. The upper line is an irregular, slow speech waveform. The lower line is a steady, fast, even sine wave, the carrier. Both lines run as arrows into a central block. One arrow leaves the block on the right. It carries a fast carrier wave whose shape is varied by the speech waveform, drawn faintly over it. Signal flow runs left to right.",
        "imageSearchTerm": "Modulation: speech combined with a carrier",
        "alt": "Modulation: speech combined with a carrier: modulation as two inputs, speech and a radio frequency carrier, joined into one signal that carries the speech.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-modulation.13d7e989.webp"
      },
      "uid": "1yq3pzd1m1t0mb"
    },
    {
      "id": "ht-l10-f-transceiver",
      "shape": "fact",
      "tags": [
        "station-setup",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "imagePrompt": "A amateur radio transceiver sitting on a desk with its dial and display lit.",
        "imageSearchTerm": "amateur radio transceiver on desk",
        "alt": "An amateur radio transceiver on a desk",
        "kind": "photo",
        "credit": "Wikimedia Commons · Hp.Baumeler · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:IC-7300.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-transceiver.6290421d.webp"
      },
      "title": "A Transceiver Is Two Radios in One",
      "body": "A **transceiver** is a device that combines a receiver and a transmitter.",
      "uid": "a26uhgz4egm2"
    },
    {
      "id": "ht-l10-f-transceiver-hero",
      "shape": "fact",
      "title": "Receiver Plus Transmitter",
      "body": "A transceiver is one device that combines a receiver and a transmitter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "station-setup",
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A amateur radio transceiver sitting on a desk with its dial and display lit.",
        "imageSearchTerm": "amateur radio transceiver on desk",
        "alt": "An amateur radio transceiver on a desk",
        "kind": "photo",
        "credit": "Wikimedia Commons · Hp.Baumeler · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:IC-7300.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-transceiver.6290421d.webp"
      },
      "uid": "1roer0rdz0x6z"
    },
    {
      "id": "ht-l10-f-transverter",
      "shape": "fact",
      "tags": [
        "station-setup",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Transverter Shifts Bands",
      "body": "A **transverter** is the device that converts the radio frequency (RF) input and output of a transceiver to another band. That is how a transceiver can work on a band it does not cover itself.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal chain of three items. On the left is a transceiver box. In the middle is a transverter box. On the right is a simple antenna symbol, a vertical line on top of a short base line. Two-headed arrows join the transceiver to the transverter and the transverter to the antenna, showing signals moving in both directions for receive and transmit. Mark the left link as the transceiver's own band and the right link as the other band, using two different colors.",
        "imageSearchTerm": "A transverter moves a transceiver to another band",
        "alt": "A transverter moves a transceiver to another band: where a transverter sits and that it converts both the transceiver's radio frequency input and its output to another band.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-transverter.2a4165fd.webp"
      },
      "uid": "142gdt81k0yegg"
    },
    {
      "id": "ht-l10-f-ptt",
      "shape": "fact",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The PTT Input Switches to Transmit",
      "body": "A transceiver's **push to talk (PTT)** input switches the transceiver from receive to transmit when it is grounded.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side, each with the same circuit. A transceiver box has a terminal marked as the PTT input. A wire runs from that terminal to a standard single-pole switch symbol, and the far side of the switch connects to the standard ground symbol of three stacked, shortening horizontal lines. In the left panel the switch is drawn open and the transceiver shows a receive state. In the right panel the switch is drawn closed, completing the path to ground, and the transceiver shows a transmit state.",
        "imageSearchTerm": "Grounding the PTT input switches to transmit",
        "alt": "Grounding the push to talk (PTT) input switches to transmit: with the switch open the transceiver receives, and with the input grounded it transmits.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-ptt.72cf7da1.webp"
      },
      "uid": "qp5thr13by7fh"
    },
    {
      "id": "ht-l10-f-rf-amp",
      "shape": "fact",
      "tags": [
        "power",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "imagePrompt": "A radio frequency power amplifier box on a shelf connected by cables to a transceiver.",
        "imageSearchTerm": "amateur radio power amplifier station",
        "alt": "A power amplifier connected to a radio transceiver",
        "kind": "photo",
        "credit": "Wikimedia Commons · Zuzu · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:RM_Italy_KL-203_linear_amplifier_rear_with_unfused_power_cable.jpeg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-rf-amp.33bda647.webp"
      },
      "title": "Adding a Power Amplifier",
      "body": "A **radio frequency (RF) power amplifier** added to the output of a transceiver increases the transmitted output power.",
      "uid": "16afwmfkxol9x"
    },
    {
      "id": "ht-l10-f-rf-amp-hero",
      "shape": "fact",
      "title": "More Power at the Output",
      "body": "Adding a radio frequency (RF) power amplifier to the output of a transceiver increases the transmitted output power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "power",
        "station-setup"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A radio frequency power amplifier box on a shelf connected by cables to a transceiver.",
        "imageSearchTerm": "amateur radio power amplifier station",
        "alt": "A power amplifier connected to a radio transceiver",
        "kind": "photo",
        "credit": "Wikimedia Commons · Zuzu · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:RM_Italy_KL-203_linear_amplifier_rear_with_unfused_power_cable.jpeg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-rf-amp.33bda647.webp"
      },
      "uid": "1hm9xud1logzil"
    },
    {
      "id": "ht-l10-f-amp-switch",
      "shape": "fact",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Amplifier Mode Switch",
      "body": "Some very high frequency (VHF) power amplifiers have a switch that selects either single sideband (SSB) or CW-FM, where CW means International Morse code telegraphy emissions and FM stands for frequency modulated. That switch sets the **amplifier** for proper operation in the selected mode.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right chain. A transceiver box has an arrow from its output into a very high frequency (VHF) power amplifier box, drawn as a block with the standard amplifier triangle inside it. An arrow continues from the amplifier to a simple antenna symbol. On the amplifier block is a two-position selector, one position marked SSB and the other marked CW-FM, with a pointer from the selector to the amplifier triangle. Add a caption under the selector.",
        "imageSearchTerm": "The amplifier's SSB or CW-FM switch",
        "alt": "A very high frequency (VHF) power amplifier after the transceiver, with a switch for single sideband (SSB) or Morse code and frequency modulated (CW-FM) that sets it for the selected mode.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-amp-switch.e49b9e55.webp"
      },
      "uid": "1fik4tqzzy27i"
    },
    {
      "id": "ht-l10-q-selectivity",
      "shape": "mcq",
      "tags": [
        "circuits",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A receiver separates a wanted station from others on nearby frequencies. Which property is this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Sensitivity"
        },
        {
          "modality": "text",
          "value": "Selectivity"
        },
        {
          "modality": "text",
          "value": "Modulation"
        },
        {
          "modality": "text",
          "value": "Oscillation"
        }
      ],
      "correctIndex": 1,
      "explanation": "Selectivity is telling multiple signals apart. Sensitivity is only detecting that a signal is present, which is the tempting mix-up.",
      "uid": "wh12uc141xzrk"
    },
    {
      "id": "ht-l10-q-transverter",
      "shape": "mcq",
      "tags": [
        "station-setup",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants a transceiver to work on a band it does not cover. Which device converts its radio frequency (RF) input and output?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A low-pass filter"
        },
        {
          "modality": "text",
          "value": "A high-pass filter"
        },
        {
          "modality": "text",
          "value": "A phase converter"
        },
        {
          "modality": "text",
          "value": "A transverter"
        }
      ],
      "correctIndex": 3,
      "explanation": "A transverter converts a transceiver's RF input and output to another band. Filters pass or block frequencies and do not convert them.",
      "uid": "1vfkxnk1baqlhs"
    },
    {
      "id": "ht-l10-q-oscillator",
      "shape": "mcq",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which circuit creates a signal at one chosen frequency inside a radio?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A mixer"
        },
        {
          "modality": "text",
          "value": "A low-pass filter"
        },
        {
          "modality": "text",
          "value": "An amplitude modulator"
        },
        {
          "modality": "text",
          "value": "An oscillator"
        }
      ],
      "correctIndex": 3,
      "explanation": "An oscillator generates a signal at a specific frequency. A mixer only converts a signal from one frequency to another.",
      "uid": "10fg77g12j1p4s"
    },
    {
      "id": "ht-l10-q-ptt",
      "shape": "mcq",
      "tags": [
        "operating",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "What happens when a transceiver's push to talk (PTT) input is grounded?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Sends telegraph keying"
        },
        {
          "modality": "text",
          "value": "Produces a tuning tone"
        },
        {
          "modality": "text",
          "value": "Feeds preamplifier tone"
        },
        {
          "modality": "text",
          "value": "Changes radio to transmit"
        }
      ],
      "correctIndex": 3,
      "explanation": "Grounding the PTT input switches the transceiver from receive to transmit. It is not a Morse code key input or a tone source.",
      "uid": "tyfr2p5hpg6p"
    },
    {
      "id": "ht-l10-tf-vfo",
      "shape": "trueFalse",
      "tags": [
        "circuits",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The variable frequency oscillator (VFO) in a transceiver sets the receive and transmit frequency.",
      "isTrue": true,
      "why": "Setting the receive and transmit frequency is the VFO's job.",
      "uid": "1o9m6rh3bqc5b"
    },
    {
      "id": "ht-l10-tf-amp-switch",
      "shape": "trueFalse",
      "tags": [
        "station-setup",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The mode switch on a very high frequency (VHF) power amplifier changes the mode of the transmitted signal.",
      "isTrue": false,
      "why": "The switch sets the amplifier for proper operation in the selected mode. It does not change the transmitted signal's mode.",
      "uid": "g9mdhm31vgls"
    },
    {
      "id": "ht-l10-c-rf-amp",
      "shape": "cloze",
      "tags": [
        "power",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A radio frequency (RF) power ___ added to a transceiver's output increases the transmitted output power.",
      "answer": "amplifier",
      "distractors": [
        "potentiometer",
        "splitter",
        "filter"
      ],
      "explanation": "An RF power amplifier raises output power. A potentiometer does not.",
      "uid": "1akp2twwxeuq6"
    },
    {
      "id": "ht-l10-p-transverter",
      "shape": "pair",
      "tags": [
        "station-setup",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Transverter"
      },
      "sideB": {
        "modality": "text",
        "value": "Converts a transceiver to another band"
      },
      "uid": "18cdjc21u0zjfs"
    },
    {
      "id": "ht-l10-f-broadcast-rx",
      "shape": "fact",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Broadcast Radios Hear Hams",
      "body": "A broadcast amplitude modulated (AM) or frequency modulated (FM) radio can pick up an amateur transmission unintentionally. The cause is that the receiver is **unable to reject** strong signals outside the AM or FM band.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A frequency axis with no numbers. A shaded region marks the broadcast band the radio is meant to receive. Outside that region, a tall bar marks a strong amateur signal. A curved arrow runs from the amateur bar into a small generic receiver box placed above the shaded region, crossing a dashed boundary meant to show the receiver's rejection. Mark that the arrow passes through the boundary rather than being stopped.",
        "imageSearchTerm": "Why a broadcast radio hears an amateur signal",
        "alt": "Why a broadcast radio hears an amateur signal. The strong amateur signal lies outside the broadcast band and gets in because the receiver cannot reject it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-broadcast-rx.183242fb.webp"
      },
      "uid": "1l509bm1mfwbfq"
    },
    {
      "id": "ht-l10-f-rfi-causes",
      "shape": "fact",
      "tags": [
        "interference",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Three Causes of Interference",
      "body": "Radio frequency (RF) interference can come from several sources. **Fundamental overload**, harmonics and spurious emissions can each cause it. All three are correct causes.",
      "uid": "13grwk7yd5b6b"
    },
    {
      "id": "ht-l10-f-swr-power",
      "shape": "fact",
      "tags": [
        "circuits",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "High SWR and Low Power",
      "body": "**High standing wave ratio (SWR)** might be the cause of low radio frequency (RF) power output from a solid-state transceiver.",
      "uid": "1tiz6hiyfy02e"
    },
    {
      "id": "ht-l10-f-antenna-filter",
      "shape": "fact",
      "tags": [
        "interference",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A single arrow runs from a box labelled amateur station transmission to a box labelled affected non-amateur receiver. A small filter symbol sits at the antenna input of the receiver box, on the side facing the arrow, with a short line marking where the amateur signal is blocked. Nothing else is drawn.",
        "imageSearchTerm": "Where the Filter Goes for Interference",
        "alt": "Where the Filter Goes for Interference: the fix for interference to a non-amateur receiver is a filter at that receiver's antenna input, blocking the amateur signal.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-antenna-filter.8723733b.webp"
      },
      "title": "Filter at the Affected Receiver",
      "body": "To reduce interference from an amateur station to a non-amateur over-the-air receiver, put a **filter** at the antenna input of the affected receiver. It blocks the amateur signal.",
      "uid": "1sskp0g1db0mbi"
    },
    {
      "id": "ht-l10-f-neighbor-report",
      "shape": "fact",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "First Response to a Neighbor's Complaint",
      "body": "When a neighbor reports interference to radio or TV, the operator should first make sure the station is functioning properly. It should not interfere with the operator's own radio or television on the same channel.",
      "uid": "2mavpp1n4wj4h"
    },
    {
      "id": "ht-l10-f-band-reject",
      "shape": "fact",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Band-Reject Filter Against FM Stations",
      "body": "A **band-reject filter** can reduce interference to a 2-meter band transceiver from a nearby commercial frequency modulated (FM) station.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A response chart. The horizontal axis is frequency, with no numbers, and the vertical axis is signal passed. Draw a curve that stays high across the chart except for one deep, narrow notch. Inside the notch, draw a tall bar for the commercial FM station, cut off or greyed where the notch blocks it. In the high, flat part of the curve, draw a bar for the 2-meter band signal, drawn intact. The left-to-right order of the two bars is schematic only.",
        "imageSearchTerm": "A band-reject filter blocks the FM station",
        "alt": "A band-reject filter blocks a narrow band holding a strong commercial frequency modulated (FM) station, while the 2-meter signal still passes.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-band-reject.b26f46c0.webp"
      },
      "uid": "1m2h5dq1hfoo9s"
    },
    {
      "id": "ht-l10-f-neighbor-device",
      "shape": "fact",
      "tags": [
        "interference",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Neighbor's Device Interferes",
      "body": "If something in a neighbor's home causes harmful interference to an amateur station, three responses are correct. Work with the neighbor to identify the offending device. Politely inform the neighbor that Federal Communications Commission (FCC) rules prohibit the use of devices that cause interference. Make sure the station meets the standards of good amateur practice.",
      "uid": "1omeck06p71gm"
    },
    {
      "id": "ht-l10-f-cable-tv",
      "shape": "fact",
      "tags": [
        "interference",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "First Step for Cable TV Interference",
      "body": "For interference to non-fiber optic cable TV, the first step is to be sure all TV feed line **coaxial connectors** are installed properly.",
      "illustration": {
        "imagePrompt": "Standard and right-angle F-type coaxial connectors of the kind used on cable TV feed lines.",
        "imageSearchTerm": "F connector coaxial",
        "alt": "Standard and right-angle F-type coaxial connectors of the kind used on cable TV feed lines.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Eyreland · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Flex_Coax_Connector_F_Type.jpg",
        "subject": "Standard and right-angle F-type coaxial connectors of the kind used on cable TV feed lines.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-cable-tv.66c4210b.webp"
      },
      "uid": "5kysdh1l7lrcp"
    },
    {
      "id": "ht-l10-f-overdeviation",
      "shape": "fact",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Curing Over-Deviation",
      "body": "A report that a frequency modulated (FM) handheld or mobile transceiver is **over-deviating** is answered by talking farther away from the microphone.",
      "uid": "y0q0c1toy20a"
    },
    {
      "id": "ht-l10-f-repeater-audio",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Distorted Audio Through a Repeater",
      "body": "If a report says audio through a frequency modulated (FM) repeater is distorted or unintelligible, three causes are all correct. The transmitter may be slightly off frequency. The operator may be speaking too loudly or too close to the microphone. The operator may also be in a bad location.",
      "uid": "nvuye0zjyegm"
    },
    {
      "id": "ht-l10-f-ferrite",
      "shape": "fact",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "imagePrompt": "A clip-on ferrite choke clamped around a cable.",
        "imageSearchTerm": "ferrite choke microphone cable",
        "alt": "A clip-on ferrite choke clamped around a red cable.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Karl-Martin Skontorp · CC BY 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Ferrite_clamp-on.jpg",
        "subject": "A clip-on ferrite choke clamped around a red cable.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-ferrite.b2959544.webp"
      },
      "title": "Ferrite Choke on the Mic Cable",
      "body": "A clip-on **ferrite choke** on the microphone cable can eliminate distorted voice transmissions. It prevents the transmitted signal from feeding back into the transmitter.",
      "uid": "iunozu18lfmyc"
    },
    {
      "id": "ht-l10-f-ferrite-hero",
      "shape": "fact",
      "title": "Clip-On Choke for the Mic",
      "body": "A clip-on ferrite choke on the microphone cable can eliminate distorted voice transmissions. It keeps the transmitted signal from feeding back into the transmitter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "interference",
        "circuits"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A clip-on ferrite choke clamped around a cable.",
        "imageSearchTerm": "ferrite choke microphone cable",
        "alt": "A clip-on ferrite choke clamped around a red cable.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Karl-Martin Skontorp · CC BY 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Ferrite_clamp-on.jpg",
        "subject": "A clip-on ferrite choke clamped around a red cable.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l10-f-ferrite.b2959544.webp"
      },
      "uid": "vf14nj1r8d6y5"
    },
    {
      "id": "ht-l10-d-harmful-interference",
      "shape": "definition",
      "tags": [
        "interference",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Harmful interference"
      },
      "definition": {
        "modality": "text",
        "value": "Interference that endangers radionavigation or other safety services, or seriously degrades, obstructs or repeatedly interrupts a radiocommunication service operating under the Radio Regulations",
        "short": "Endangers safety services or badly disrupts radio service"
      },
      "uid": "74wlhu1mm0l2u"
    },
    {
      "id": "ht-l10-q-cable-tv",
      "shape": "mcq",
      "tags": [
        "interference",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A neighbor's non-fiber optic cable TV breaks up when a nearby amateur station transmits. What is the first step?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Fit a low-pass filter at the TV"
        },
        {
          "modality": "text",
          "value": "Check all TV feed line connectors"
        },
        {
          "modality": "text",
          "value": "Add a high-pass filter at the TV"
        },
        {
          "modality": "text",
          "value": "Install a preamplifier at the TV"
        }
      ],
      "correctIndex": 1,
      "explanation": "Making sure all TV feed line coaxial connectors are installed properly comes first. Filters and a preamplifier at the TV input are not the first step.",
      "uid": "1pkg2xo1aywvtu"
    },
    {
      "id": "ht-l10-q-overdev",
      "shape": "mcq",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A listener says a licensee's frequency modulated (FM) handheld signal is over-deviating. What helps?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Talk louder into the microphone"
        },
        {
          "modality": "text",
          "value": "Let the transceiver cool down first",
          "short": "Let the radio cool down"
        },
        {
          "modality": "text",
          "value": "Switch to a higher power level"
        },
        {
          "modality": "text",
          "value": "Talk farther from the microphone"
        }
      ],
      "correctIndex": 3,
      "explanation": "Moving farther from the microphone cures over-deviation. Talking louder, cooling the radio or raising power is not the cure.",
      "uid": "2tbsf5az2d7n"
    },
    {
      "id": "ht-l10-q-low-power",
      "shape": "mcq",
      "tags": [
        "circuits",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A solid-state transceiver delivers low radio frequency (RF) power. Which condition might be the cause?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Poor amplifier linearity"
        },
        {
          "modality": "text",
          "value": "A low standing wave ratio (SWR)",
          "short": "Low SWR"
        },
        {
          "modality": "text",
          "value": "Poor amplifier noise figure"
        },
        {
          "modality": "text",
          "value": "A high standing wave ratio (SWR)",
          "short": "High SWR"
        }
      ],
      "correctIndex": 3,
      "explanation": "A high SWR might cause low RF power output. A low SWR is not a cause.",
      "uid": "1ev5k6018x7hyy"
    },
    {
      "id": "ht-l10-q-band-reject",
      "shape": "mcq",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A 2-meter band transceiver is troubled by a nearby commercial frequency modulated (FM) station. What can reduce it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Installing a preamplifier"
        },
        {
          "modality": "text",
          "value": "Using double-shielded coax cable"
        },
        {
          "modality": "text",
          "value": "Adding mic cable bypass capacitors",
          "short": "Mic cable bypass capacitors"
        },
        {
          "modality": "text",
          "value": "Installing a band-reject filter"
        }
      ],
      "correctIndex": 3,
      "explanation": "A band-reject filter can reduce the commercial station's interference. A preamplifier, shielded coax and mic-cable capacitors are not the remedy.",
      "uid": "w2ezm7eeltxv"
    },
    {
      "id": "ht-l10-tf-antenna-filter",
      "shape": "trueFalse",
      "tags": [
        "interference",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A filter at the antenna input of an affected non-amateur receiver can block an amateur signal and reduce interference.",
      "isTrue": true,
      "why": "A filter at the affected receiver's antenna input blocks the amateur signal.",
      "uid": "3e5k281acifok"
    },
    {
      "id": "ht-l10-tf-extra-feedline",
      "shape": "trueFalse",
      "tags": [
        "interference",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Adding extra feed line to lower standing wave ratio (SWR) eliminates distorted voice transmissions.",
      "isTrue": false,
      "why": "A clip-on ferrite choke on the microphone cable eliminates the distortion. Extra feed line does not.",
      "uid": "5g52vbpqtbab"
    },
    {
      "id": "ht-l10-c-choke",
      "shape": "cloze",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A clip-on ferrite ___ on the microphone cable can eliminate distorted voice transmissions.",
      "answer": "choke",
      "distractors": [
        "magnet",
        "transformer",
        "antenna"
      ],
      "explanation": "The choke keeps the transmitted signal from feeding back into the transmitter through the cable.",
      "uid": "1onz3rj6qxctp"
    },
    {
      "id": "ht-l10-p-overdev",
      "shape": "pair",
      "tags": [
        "operating",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Over-deviation"
      },
      "sideB": {
        "modality": "text",
        "value": "Talk farther from the microphone"
      },
      "uid": "1m86b451qkdal9"
    },
    {
      "id": "ht-l10-tf-mixer",
      "shape": "trueFalse",
      "tags": [
        "circuits",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A phase splitter converts a signal from one frequency to another.",
      "isTrue": false,
      "why": "A mixer converts a signal from one frequency to another. A phase splitter does not.",
      "uid": "1xn471jd7i2jf"
    },
    {
      "id": "ht-l10-c-modulation",
      "shape": "cloze",
      "tags": [
        "modulation",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Combining speech with a radio frequency (RF) carrier signal is called ___.",
      "answer": "modulation",
      "distractors": [
        "oscillation",
        "impedance matching",
        "filtering"
      ],
      "explanation": "Modulation puts speech onto the RF carrier. Oscillation only generates a signal at a frequency.",
      "uid": "avjw6t4hj7eh"
    },
    {
      "id": "ht-l10-p-transceiver",
      "shape": "pair",
      "tags": [
        "station-setup",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Transceiver"
      },
      "sideB": {
        "modality": "text",
        "value": "Combines a receiver and a transmitter"
      },
      "uid": "kd0l051vk1rp"
    },
    {
      "id": "ht-l10-tf-broadcast-rx",
      "shape": "trueFalse",
      "tags": [
        "interference",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A broadcast frequency modulated (FM) radio picks up an amateur signal unintentionally because the transmitter's microphone gain is too high.",
      "isTrue": false,
      "why": "The cause is that the receiver is unable to reject strong signals outside its band. High microphone gain is not the cause.",
      "uid": "vnzan01b4eegq"
    },
    {
      "id": "ht-l10-tf-neighbor-device",
      "shape": "trueFalse",
      "tags": [
        "interference",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "When something in a neighbor's home causes harmful interference to an amateur station, working with the neighbor to identify the offending device is a correct response.",
      "isTrue": true,
      "why": "Working with the neighbor to find the device is one of three correct responses, along with politely citing Federal Communications Commission (FCC) rules and keeping to good amateur practice.",
      "uid": "i38f9v2bfbx7"
    },
    {
      "id": "ot-ht-l10-t7a01",
      "shape": "mcq",
      "tags": [
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which term describes the ability of a receiver to detect the presence of a signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "RF gain"
        },
        {
          "modality": "text",
          "value": "Sensitivity"
        },
        {
          "modality": "text",
          "value": "Selectivity"
        },
        {
          "modality": "text",
          "value": "Total Harmonic Distortion"
        }
      ],
      "correctIndex": 1,
      "explanation": "Sensitivity is the ability of a receiver to detect the presence of a signal. Selectivity is a different property: telling signals apart. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1hgloiib3tvoo"
    },
    {
      "id": "ot-ht-l10-t7a04",
      "shape": "mcq",
      "tags": [
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which term describes the ability of a receiver to discriminate between multiple signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Discrimination ratio"
        },
        {
          "modality": "text",
          "value": "Sensitivity"
        },
        {
          "modality": "text",
          "value": "Selectivity"
        },
        {
          "modality": "text",
          "value": "Harmonic distortion"
        }
      ],
      "correctIndex": 2,
      "explanation": "Selectivity is the ability of a receiver to discriminate between multiple signals, picking one out from several.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9cb3uiu06dm"
    },
    {
      "id": "ot-ht-l10-t7a03",
      "shape": "mcq",
      "tags": [
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is used to convert a signal from one frequency to another?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Phase splitter"
        },
        {
          "modality": "text",
          "value": "Mixer"
        },
        {
          "modality": "text",
          "value": "Inverter"
        },
        {
          "modality": "text",
          "value": "Amplifier"
        }
      ],
      "correctIndex": 1,
      "explanation": "A mixer converts a signal from one frequency to another. A phase splitter, inverter and amplifier do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "idsrvx184mdy1"
    },
    {
      "id": "ot-ht-l10-t7a05",
      "shape": "mcq",
      "tags": [
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the name of a circuit that generates a signal at a specific frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Reactance modulator"
        },
        {
          "modality": "text",
          "value": "Phase modulator"
        },
        {
          "modality": "text",
          "value": "Low-pass filter"
        },
        {
          "modality": "text",
          "value": "Oscillator"
        }
      ],
      "correctIndex": 3,
      "explanation": "An oscillator is a circuit that generates a signal at a specific frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "cx4lx21fvnuku"
    },
    {
      "id": "ot-ht-l10-t7a11",
      "shape": "mcq",
      "tags": [
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the function of the Variable Frequency Oscillator (VFO) circuit in a transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Set the receive and transmit frequency"
        },
        {
          "modality": "text",
          "value": "Provide automatic frequency control"
        },
        {
          "modality": "text",
          "value": "Inject a variable frequency to allow CW reception"
        },
        {
          "modality": "text",
          "value": "Generate and demodulate single sideband signals"
        }
      ],
      "correctIndex": 0,
      "explanation": "The VFO in a transceiver sets the receive and transmit frequency. CW stands for continuous wave.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1upzxc516ikstr"
    },
    {
      "id": "ot-ht-l10-t7a08",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following describes combining speech with an RF carrier signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Impedance matching"
        },
        {
          "modality": "text",
          "value": "Oscillation"
        },
        {
          "modality": "text",
          "value": "Modulation"
        },
        {
          "modality": "text",
          "value": "Low-pass filtering"
        }
      ],
      "correctIndex": 2,
      "explanation": "Modulation is combining speech with a radio frequency (RF) carrier signal.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19sj1741rufpz8"
    },
    {
      "id": "ot-ht-l10-t7a02",
      "shape": "mcq",
      "tags": [
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A device that combines a receiver and transmitter"
        },
        {
          "modality": "text",
          "value": "A device for matching feed line impedance to 50 ohms"
        },
        {
          "modality": "text",
          "value": "A device for automatically sending and decoding Morse code"
        },
        {
          "modality": "text",
          "value": "A device for converting receiver and transmitter frequencies to another band"
        }
      ],
      "correctIndex": 0,
      "explanation": "A transceiver is a device that combines a receiver and a transmitter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1oxbxnh8bpjdh"
    },
    {
      "id": "ot-ht-l10-t7a06",
      "shape": "mcq",
      "tags": [
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "What device converts the RF input and output of a transceiver to another band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "High-pass filter"
        },
        {
          "modality": "text",
          "value": "Low-pass filter"
        },
        {
          "modality": "text",
          "value": "Transverter"
        },
        {
          "modality": "text",
          "value": "Phase converter"
        }
      ],
      "correctIndex": 2,
      "explanation": "A transverter converts the radio frequency (RF) input and output of a transceiver to another band. Filters do not convert frequencies.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "lxrneqsni1dy"
    },
    {
      "id": "ot-ht-l10-t7a07",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the function of a transceiver’s PTT input?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Input for a key used to send CW"
        },
        {
          "modality": "text",
          "value": "Switches transceiver from receive to transmit when grounded"
        },
        {
          "modality": "text",
          "value": "Provides a transmit tuning tone when grounded"
        },
        {
          "modality": "text",
          "value": "Input for a preamplifier tuning tone"
        }
      ],
      "correctIndex": 1,
      "explanation": "The push to talk (PTT) input switches the transceiver from receive to transmit when grounded. CW stands for continuous wave.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1udtjsjpe658v"
    },
    {
      "id": "ot-ht-l10-t7a09",
      "shape": "mcq",
      "tags": [
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the function of the switch which selects either SSB or CW-FM on some VHF power amplifiers?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Change the mode of the transmitted signal"
        },
        {
          "modality": "text",
          "value": "Set the amplifier for proper operation in the selected mode"
        },
        {
          "modality": "text",
          "value": "Change the frequency range of the amplifier to operate in the proper segment of the band"
        },
        {
          "modality": "text",
          "value": "Reduce the received signal noise"
        }
      ],
      "correctIndex": 1,
      "explanation": "The switch sets the amplifier for proper operation in the selected mode. It does not change the transmitted signal's mode. SSB stands for single sideband and VHF stands for very high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1p031g6zsxst0"
    },
    {
      "id": "ot-ht-l10-t7a10",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "What can be added to the output of a transceiver to increase the transmitted output power?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A potentiometer"
        },
        {
          "modality": "text",
          "value": "An RF power amplifier"
        },
        {
          "modality": "text",
          "value": "An impedance multiplier"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "A radio frequency (RF) power amplifier added to the output increases transmitted power. A potentiometer and impedance multiplier do not, so all-correct is wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1j1fo421pjtkbk"
    },
    {
      "id": "ot-ht-l10-t7b02",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "What would cause a broadcast AM or FM radio to receive an amateur radio transmission unintentionally?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The receiver is unable to reject strong signals outside the AM or FM band"
        },
        {
          "modality": "text",
          "value": "The microphone gain of the transmitter is turned up too high"
        },
        {
          "modality": "text",
          "value": "The audio amplifier of the transmitter is overloaded"
        },
        {
          "modality": "text",
          "value": "The deviation of an FM transmitter is set too low"
        }
      ],
      "correctIndex": 0,
      "explanation": "A broadcast receiver hears a ham because it cannot reject strong signals outside the amplitude modulated (AM) or frequency modulated (FM) band. High microphone gain is not the cause.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "12vg4dw1uykjlc"
    },
    {
      "id": "ot-ht-l10-t7b03",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can cause radio frequency interference?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Fundamental overload"
        },
        {
          "modality": "text",
          "value": "Harmonics"
        },
        {
          "modality": "text",
          "value": "Spurious emissions"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Fundamental overload, harmonics and spurious emissions can each cause radio frequency interference, so all are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8bqd7l1evofb"
    },
    {
      "id": "ot-ht-l10-t7b05",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following might reduce interference by an amateur station to a non-amateur over-the-air radio receiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Block the amateur signal with a filter at the antenna input of the affected receiver"
        },
        {
          "modality": "text",
          "value": "Block the interfering signal with a filter on the amateur transmitter"
        },
        {
          "modality": "text",
          "value": "Switch the transmitter from FM to SSB"
        },
        {
          "modality": "text",
          "value": "Switch the transmitter to a narrow-band mode"
        }
      ],
      "correctIndex": 0,
      "explanation": "A filter at the antenna input of the affected receiver blocks the amateur signal. Mode changes are not the answer. FM stands for frequency modulated and SSB stands for single sideband.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ot8teb1f26c6d"
    },
    {
      "id": "ot-ht-l10-t7b07",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can reduce interference to a 2-meter band transceiver from a nearby commercial FM station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Installing an RF preamplifier"
        },
        {
          "modality": "text",
          "value": "Using double-shielded coaxial cable"
        },
        {
          "modality": "text",
          "value": "Installing bypass capacitors on the microphone cable"
        },
        {
          "modality": "text",
          "value": "Installing a band-reject filter"
        }
      ],
      "correctIndex": 3,
      "explanation": "A band-reject filter can reduce interference from a nearby commercial frequency modulated (FM) station. A preamplifier or shielded cable is not the remedy. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1ilpzdkqqqali"
    },
    {
      "id": "ot-ht-l10-t7b06",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following actions should you take if a neighbor tells you that your station’s transmissions are interfering with their radio or TV reception?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Make sure station works properly, doesn't interfere with own radio or TV on same channel"
        },
        {
          "modality": "text",
          "value": "Immediately turn off your transmitter and contact the nearest FCC office for assistance"
        },
        {
          "modality": "text",
          "value": "Install a harmonic doubler on the transmitter output and tune until interference stops"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "First make sure the station works properly and does not interfere with the operator's own radio or TV on the same channel. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1e8x7fsln19ku"
    },
    {
      "id": "ot-ht-l10-t7b09",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "What should be the first step to resolve non-fiber optic cable TV interference caused by your amateur radio transmission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Add a low-pass filter to the TV antenna input"
        },
        {
          "modality": "text",
          "value": "Add a high-pass filter to the TV antenna input"
        },
        {
          "modality": "text",
          "value": "Add a preamplifier to the TV antenna input"
        },
        {
          "modality": "text",
          "value": "Be sure all TV feed line coaxial connectors are installed properly"
        }
      ],
      "correctIndex": 3,
      "explanation": "For non-fiber optic cable TV, first be sure all TV feed line coaxial connectors are installed properly.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19d6kin1b2sk3x"
    },
    {
      "id": "ot-ht-l10-t7b01",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What can you do if you are told your FM handheld or mobile transceiver is over-deviating?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Talk louder into the microphone"
        },
        {
          "modality": "text",
          "value": "Let the transceiver cool off"
        },
        {
          "modality": "text",
          "value": "Change to a higher power level"
        },
        {
          "modality": "text",
          "value": "Talk farther away from the microphone"
        }
      ],
      "correctIndex": 3,
      "explanation": "Over-deviation is cured by talking farther away from the microphone. Talking louder is not the cure. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1cr8ngbz3kmr3"
    },
    {
      "id": "ot-ht-l10-t7b10",
      "shape": "mcq",
      "tags": [
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "What might be a problem if you receive a report that your audio signal through an FM repeater is distorted or unintelligible?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Your transmitter is slightly off frequency"
        },
        {
          "modality": "text",
          "value": "You are speaking too loudly or too close to the microphone"
        },
        {
          "modality": "text",
          "value": "You are in a bad location"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Being off frequency, speaking too loudly or too close to the microphone, and a bad location can each distort repeater audio. All are correct. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1jqjp4y1vcwsbq"
    },
    {
      "id": "ot-ht-l10-t7b04",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following might be the cause of low RF power output from a solid-state transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Poor amplifier noise figure"
        },
        {
          "modality": "text",
          "value": "Poor amplifier linearity"
        },
        {
          "modality": "text",
          "value": "Low SWR"
        },
        {
          "modality": "text",
          "value": "High SWR"
        }
      ],
      "correctIndex": 3,
      "explanation": "High standing wave ratio (SWR) might cause low radio frequency (RF) power output from a solid-state transceiver. Low SWR is not a cause.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1aayr7e160juic"
    },
    {
      "id": "ot-ht-l10-t7b08",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "What should you do if something in a neighbor’s home is causing harmful interference to your amateur station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Work with your neighbor to identify the offending device"
        },
        {
          "modality": "text",
          "value": "Politely tell your neighbor FCC rules prohibit devices that cause interference"
        },
        {
          "modality": "text",
          "value": "Make sure your station meets the standards of good amateur practice"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Work with the neighbor to find the device, politely note Federal Communications Commission (FCC) rules, and ensure good amateur practice. All three are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "65punt13qyybt"
    },
    {
      "id": "ot-ht-l10-t7b11",
      "shape": "mcq",
      "tags": [
        "interference"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can eliminate distorted voice transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Adding extra feedline to the antenna to lower SWR"
        },
        {
          "modality": "text",
          "value": "Turning the radio on and off to reset the computer-controlled circuitry"
        },
        {
          "modality": "text",
          "value": "Adding a clip-on ferrite “choke” on mic cable to stop transmitted signal feeding back"
        },
        {
          "modality": "text",
          "value": "Turning squelch fully clockwise to stop the transmitted signal triggering squelch"
        }
      ],
      "correctIndex": 2,
      "explanation": "A clip-on ferrite choke on the microphone cable keeps the transmitted signal from feeding back into the transmitter. SWR stands for standing wave ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "vt1u1n1fyiftv"
    },
    {
      "id": "ht-l11-f-dummy-purpose",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Use a Dummy Load",
      "body": "A **dummy load** lets a transmitter be tested without putting a signal on the air. Its primary purpose is to prevent transmitting signals over the air when making tests.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A plain box at left marked as the transmitter. A coaxial cable runs from it to a box at right that holds a resistor, drawn as the standard zigzag resistor symbol, sitting on a finned heat sink. Draw an antenna off to one side in gray, plainly not connected, with no radiation lines. Show signal flow from the transmitter into the dummy load as a single arrow along the cable.",
        "imageSearchTerm": "Testing into a dummy load",
        "alt": "Testing into a dummy load. A transmitter under test feeds a dummy load instead of an antenna, so no signal goes over the air.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-dummy-purpose.813c27d4.webp"
      },
      "uid": "v2il2c1ljjpvu"
    },
    {
      "id": "ht-l11-f-analyzer",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Checking Antenna Resonance",
      "body": "An **antenna analyzer** is the instrument used to determine whether an antenna is resonant at the desired operating frequency.",
      "illustration": {
        "imagePrompt": "An MFJ-269 antenna analyzer with its meters and display lit, connected to a dummy load.",
        "imageSearchTerm": "antenna analyzer",
        "alt": "An MFJ-269 antenna analyzer with its meters and display lit, connected to a dummy load.",
        "kind": "photo",
        "credit": "Wikimedia Commons · しまでん · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:SWR_analyzer_measuring_a_dummy_load.jpg",
        "subject": "An MFJ-269 antenna analyzer with its meters and display lit, connected to a dummy load.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-analyzer.f4d2070f.webp"
      },
      "uid": "219gbs1ew7zvc"
    },
    {
      "id": "ht-l11-f-dummy-makeup",
      "shape": "fact",
      "tags": [
        "components",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Dummy Load Is Made Of",
      "body": "A typical radio frequency (RF) dummy load consists of a 50-ohm non-inductive resistor mounted on a **heat sink**.",
      "illustration": {
        "imagePrompt": "A small metal-finned radio dummy load sitting on a workbench beside a coaxial cable.",
        "imageSearchTerm": "amateur radio dummy load",
        "alt": "A finned dummy load on a workbench",
        "kind": "photo",
        "credit": "Wikimedia Commons · Karl-Martin Skontorp from Norway · CC BY 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Dummy_load_(detail).jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-dummy-makeup.c9f3e1e8.webp"
      },
      "uid": "5kv3ff1qlq3ep"
    },
    {
      "id": "ht-l11-f-dummy-makeup-hero",
      "shape": "fact",
      "title": "A Resistor on a Heat Sink",
      "body": "A typical radio frequency (RF) dummy load is a 50-ohm non-inductive resistor mounted on a heat sink.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "components",
        "test-equipment"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A small metal-finned radio dummy load sitting on a workbench beside a coaxial cable.",
        "imageSearchTerm": "amateur radio dummy load",
        "alt": "A finned dummy load on a workbench",
        "kind": "photo",
        "credit": "Wikimedia Commons · Karl-Martin Skontorp from Norway · CC BY 2.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Dummy_load_(detail).jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-dummy-makeup.c9f3e1e8.webp"
      },
      "uid": "sbvaogwom12m"
    },
    {
      "id": "ht-l11-f-swr-match",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SWR of 1:1 Means a Match",
      "body": "The **standing wave ratio (SWR)** is read on an SWR meter as a ratio. A reading of 1:1 indicates a perfect impedance match between the antenna and the feed line.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal meter scale for standing wave ratio. The left end is marked 1:1, and a mark further to the right is marked 4:1. Under 1:1, a small sketch shows the antenna and feed line meeting cleanly with a check mark. Under 4:1, the same sketch is shown with a cross mark. No other tick values on the scale.",
        "imageSearchTerm": "What 1:1 and 4:1 SWR mean",
        "alt": "Two standing wave ratio (SWR) readings on one scale: 1:1, a perfect match, and 4:1, a mismatch.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-swr-match.62860243.webp"
      },
      "uid": "1jxm723veumbt"
    },
    {
      "id": "ht-l11-f-high-swr-cut",
      "shape": "fact",
      "tags": [
        "feed-lines",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Transmitters Cut Power",
      "body": "Most solid-state transmitters reduce output power as standing wave ratio (SWR) increases beyond a certain level. The reduction protects the radio frequency (RF) output amplifier **transistors**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple line chart with no numbers on either axis. The vertical axis is output power and the horizontal axis is SWR, rising to the right. The line runs flat at full output, then at a marked point turns downward as SWR keeps rising. A callout at the bend explains why the power is cut.",
        "imageSearchTerm": "Output power falls as SWR rises",
        "alt": "Output power falls as standing wave ratio (SWR) rises: past a certain SWR level, power is reduced to protect the radio frequency (RF) output amplifier transistors.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-high-swr-cut.dc061122.webp"
      },
      "uid": "1axvjlm1s23j0i"
    },
    {
      "id": "ht-l11-f-swr-4to1",
      "shape": "fact",
      "tags": [
        "feed-lines",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SWR of 4:1 Means Mismatch",
      "body": "A standing wave ratio (SWR) reading of 4:1 indicates an **impedance mismatch**.",
      "uid": "1dhqmmt84myat"
    },
    {
      "id": "ht-l11-f-line-loss-heat",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Where Lost Power Goes",
      "body": "Power lost in a feed line is converted into **heat**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A transmitter box at left and an antenna at right, joined by a long coaxial feed line. A wide arrow enters the line at the transmitter end and a narrower arrow leaves at the antenna end, showing signal flow from left to right. Wavy heat lines rise from along the length of the feed line.",
        "imageSearchTerm": "Feed line loss becomes heat",
        "alt": "Feed line loss becomes heat. Power lost along a feed line leaves it as heat.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-line-loss-heat.825efbcf.webp"
      },
      "uid": "1ob1nm51egb951"
    },
    {
      "id": "ht-l11-f-wattmeter",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Instrument That Finds SWR",
      "body": "A **directional wattmeter** can be used to determine standing wave ratio (SWR).",
      "illustration": {
        "imagePrompt": "A Para Dynamics PDC2 in-line power and standing wave ratio (SWR) meter with two analog meters and a forward/reflected switch.",
        "imageSearchTerm": "directional wattmeter",
        "alt": "A Para Dynamics PDC2 in-line power and standing wave ratio (SWR) meter with two analog meters and a forward/reflected switch.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Theonlysilentbob at English Wikipedia · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Para_dynamics_swrmeter_dec07.jpg",
        "subject": "A Para Dynamics PDC2 in-line power and SWR meter with two analog meters and a forward/reflected switch.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-wattmeter.77987bb8.webp"
      },
      "uid": "7tzgad1el7241"
    },
    {
      "id": "ht-l11-f-coax-moisture",
      "shape": "fact",
      "tags": [
        "feed-lines",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Makes Coax Fail",
      "body": "**Moisture contamination** causes failure of coaxial cables.",
      "illustration": {
        "imagePrompt": "A length of black coaxial cable with a connector, coiled on a table.",
        "imageSearchTerm": "coaxial cable connector",
        "alt": "Coaxial cable with a connector",
        "kind": "photo"
      },
      "uid": "1kr0j0oghfnkw"
    },
    {
      "id": "ht-l11-f-coax-uv",
      "shape": "fact",
      "tags": [
        "feed-lines",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Coax Jackets Resist Sunlight",
      "body": "The outer jacket of coaxial cable should be resistant to ultraviolet light. Ultraviolet light can damage the **jacket** and allow water to enter the cable.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A cutaway side view of a coaxial cable with its concentric layers: center wire, insulating layer, braid and outer jacket. Only the outer jacket is labeled. Sun rays hit the jacket from above and leave a crack in it. Water droplets pass through the crack into the cable, and the inner layers near the crack are shown wet. Small numbered arrows run the chain left to right: light, then crack, then water inside.",
        "imageSearchTerm": "How sunlight lets water into coax",
        "alt": "How sunlight lets water into coax: the chain from ultraviolet damage to the jacket, to water getting in, to the cable failing.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-coax-uv.3cf0b6da.webp"
      },
      "uid": "nfhfr1l540gt"
    },
    {
      "id": "ht-l11-f-foam-coax",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Foam Versus Solid Dielectric",
      "body": "A **foam-dielectric** coaxial cable has less loss per foot than a solid-dielectric one.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two coaxial cable cross-sections drawn at the same size, side by side. Each has a center conductor, a dielectric ring, a braid ring and a jacket. On the left, the dielectric is a uniform solid fill. On the right, the dielectric is filled with small bubbles to show foam. A note under the foam cable states its advantage.",
        "imageSearchTerm": "Foam versus solid dielectric coax",
        "alt": "Foam versus solid dielectric coax: the two dielectric types side by side, with foam having less loss per foot.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-foam-coax.088e77bd.webp"
      },
      "uid": "1sgrm9s8lnin6"
    },
    {
      "id": "ht-l11-q-test-no-signal",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee wants to test a transmitter without sending any signal over the air. What is connected in place of the antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A dummy load on the transmitter"
        },
        {
          "modality": "text",
          "value": "A directional wattmeter in line"
        },
        {
          "modality": "text",
          "value": "An antenna analyzer on the line"
        },
        {
          "modality": "text",
          "value": "A frequency counter on the line"
        }
      ],
      "correctIndex": 0,
      "explanation": "A dummy load lets a transmitter be tested without putting a signal on the air. A directional wattmeter determines standing wave ratio (SWR), and an antenna analyzer checks resonance.",
      "uid": "1e4kish1pbkbrr"
    },
    {
      "id": "ht-l11-q-uv-jacket",
      "shape": "mcq",
      "tags": [
        "feed-lines",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Coax will hang outdoors in sunlight. What is the risk if its jacket is not ultraviolet resistant?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Sunlight damages the jacket and lets in water",
          "short": "Jacket damage lets water in"
        },
        {
          "modality": "text",
          "value": "Sunlight raises the resistance of the conductors",
          "short": "Raises conductor resistance"
        },
        {
          "modality": "text",
          "value": "Sunlight mixes with radio signals, causing interference",
          "short": "Mixes with radio signals"
        },
        {
          "modality": "text",
          "value": "Sunlight increases loss in the jacket itself",
          "short": "More loss in the jacket"
        }
      ],
      "correctIndex": 0,
      "explanation": "A damaged jacket lets water in, and moisture is what fails coax. Ultraviolet light does not change conductor resistance or mix with signals.",
      "uid": "icx8uc1s6qh6g"
    },
    {
      "id": "ht-l11-q-swr-4to1",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A standing wave ratio (SWR) meter on a station's feed line shows 4:1. What does this tell the operator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A 4 dB gain in power"
        },
        {
          "modality": "text",
          "value": "Good impedance match"
        },
        {
          "modality": "text",
          "value": "A 4 dB loss in power"
        },
        {
          "modality": "text",
          "value": "Impedance mismatch"
        }
      ],
      "correctIndex": 3,
      "explanation": "A 4:1 reading means the antenna and feed line are mismatched, not well matched. An SWR figure is a ratio, not a decibel (dB) value, so it does not mean a 4 dB gain or a 4 dB loss.",
      "uid": "11ogohn9rc2c7"
    },
    {
      "id": "ht-l11-q-power-fold-back",
      "shape": "mcq",
      "tags": [
        "feed-lines",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A solid-state transmitter cuts its output as standing wave ratio (SWR) climbs. What is the reason?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To satisfy spectral purity rules",
          "short": "Satisfy purity rules"
        },
        {
          "modality": "text",
          "value": "To reduce the line mismatch",
          "short": "Reduce line mismatch"
        },
        {
          "modality": "text",
          "value": "To protect the output transistors",
          "short": "Protect output transistors"
        },
        {
          "modality": "text",
          "value": "To spare the power supply",
          "short": "Spare the power supply"
        }
      ],
      "correctIndex": 2,
      "explanation": "Cutting power protects the radio frequency (RF) output amplifier transistors. The lowered power does not lower the SWR on the line.",
      "uid": "5fwsy31h76yqv"
    },
    {
      "id": "ht-l11-tf-foam-loss",
      "shape": "trueFalse",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Foam-dielectric coax has less loss per foot than solid-dielectric coax.",
      "isTrue": true,
      "why": "Lower loss per foot is the advantage of foam dielectric over solid dielectric.",
      "uid": "fw9knspio1wi"
    },
    {
      "id": "ht-l11-tf-ohmmeter-swr",
      "shape": "trueFalse",
      "tags": [
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "An ohmmeter can be used to determine standing wave ratio (SWR).",
      "isTrue": false,
      "why": "A directional wattmeter determines SWR. A voltmeter and an ohmmeter are not the instruments for that.",
      "uid": "yw645c6ktgzg"
    },
    {
      "id": "ht-l11-c-swr-match",
      "shape": "cloze",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "On a standing wave ratio (SWR) meter, a reading of ___ shows a perfect impedance match.",
      "answer": "1:1",
      "distractors": [
        "50:50",
        "zero",
        "full scale"
      ],
      "explanation": "A 1:1 reading means a perfect match between antenna and feed line. The other readings do not show a perfect match.",
      "uid": "m3y6ywxnzmb4"
    },
    {
      "id": "ht-l11-p-dummy-parts",
      "shape": "pair",
      "tags": [
        "components",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Dummy load"
      },
      "sideB": {
        "modality": "text",
        "value": "50-ohm non-inductive resistor on a heat sink"
      },
      "uid": "1bcjnwp1jzi6k9"
    },
    {
      "id": "ht-l11-f-voltmeter",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Voltmeter Measures Potential",
      "body": "A **voltmeter** measures electric potential, which is the voltage across a part.",
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A three-row table. Row one: a voltmeter, which measures electric potential, the voltage across a part, and is connected in parallel. Row two: a multimeter set to measure current, which works as an ammeter, measures electric current, and is connected in series. Row three: an ohmmeter, which measures the resistance of a circuit or component by applying a small current and measuring the resulting voltage.",
        "imageSearchTerm": "Which Meter Measures What",
        "alt": "Which meter measures what: a voltmeter reads voltage in parallel, a multimeter set to measure current reads current in series, and an ohmmeter reads resistance.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-voltmeter.9aa133c4.webp"
      },
      "uid": "yssg5n14qc093"
    },
    {
      "id": "ht-l11-f-parallel",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Voltmeters Connect in Parallel",
      "body": "A voltmeter is connected to a component **in parallel** to measure applied voltage.",
      "uid": "i0vpi81jlhgcq"
    },
    {
      "id": "ht-l11-f-series",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Current Readings Use Series",
      "body": "A multimeter configured to measure current is connected to the component **in series**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two side-by-side panels, each with the same plain component box. Left: a voltmeter connected across the component, so it sits in parallel with it. Right: a multimeter set to measure current, placed in the wire so the current passes through it, so it sits in series with the component. Both panels are simple line drawings with no source or power supply labelled.",
        "imageSearchTerm": "Parallel for Voltage, Series for Current",
        "alt": "Parallel for voltage, series for current: a voltmeter connected across a component, and a multimeter set to measure current placed in series with it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-series.e5c361f4.webp"
      },
      "uid": "1285mzl1slmpk9"
    },
    {
      "id": "ht-l11-f-ammeter",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ammeter Measures Current",
      "body": "An **ammeter** measures electric current.",
      "illustration": {
        "imagePrompt": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "imageSearchTerm": "ammeter",
        "alt": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Lklundin, cropped and color-corrected by Kvng · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Moving_iron_ammeter.jpg",
        "subject": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-ammeter.945e5dd1.webp"
      },
      "uid": "fnf204r8qt6"
    },
    {
      "id": "ht-l11-f-ammeter-hero",
      "shape": "fact",
      "title": "A Meter for Current",
      "body": "An ammeter is an instrument that measures electric current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "imageSearchTerm": "ammeter",
        "alt": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Lklundin, cropped and color-corrected by Kvng · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Moving_iron_ammeter.jpg",
        "subject": "The face of an older panel ammeter with a 0 to 10 ampere scale, marked A.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-ammeter.945e5dd1.webp"
      },
      "uid": "19rnz62tti4pq"
    },
    {
      "id": "ht-l11-f-ohmmeter-how",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "How an Ohmmeter Works",
      "body": "An **ohmmeter** measures the resistance of a circuit or component by applying a small current and measuring the resulting voltage.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: An ohmmeter drawn as a box, with a small internal current source and a voltage reading inside it. Two probe leads run from the box to the ends of a resistor under test, drawn as the standard zigzag symbol. A small arrow shows current flowing out of the meter, through the resistor and back. A bracket across the resistor marks the voltage being measured.",
        "imageSearchTerm": "How an ohmmeter finds resistance",
        "alt": "How an ohmmeter finds resistance. An ohmmeter sends a small current through the part and measures the voltage that results.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-ohmmeter-how.d322dbe5.webp"
      },
      "uid": "11s53ymgsccg4"
    },
    {
      "id": "ht-l11-f-multimeter-damage",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Damages a Multimeter",
      "body": "Attempting to measure voltage when using the **resistance setting** can damage a multimeter.",
      "illustration": {
        "imagePrompt": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "imageSearchTerm": "digital multimeter",
        "alt": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "kind": "photo",
        "credit": "Wikimedia Commons · André Karwath aka Aka · CC BY-SA 2.5",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Digital_Multimeter_Aka.jpg",
        "subject": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-multimeter-damage.11154089.webp"
      },
      "uid": "16h6euj61w1jl"
    },
    {
      "id": "ht-l11-f-multimeter-damage-hero",
      "shape": "fact",
      "title": "Resistance Setting Risk",
      "body": "Trying to measure voltage while a multimeter is on its resistance setting can damage the meter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "test-equipment",
        "safety"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "imageSearchTerm": "digital multimeter",
        "alt": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "kind": "photo",
        "credit": "Wikimedia Commons · André Karwath aka Aka · CC BY-SA 2.5",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Digital_Multimeter_Aka.jpg",
        "subject": "A Voltcraft digital multimeter with its rotary function dial and red and black test leads.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-multimeter-damage.11154089.webp"
      },
      "uid": "idczav1pde2s7"
    },
    {
      "id": "ht-l11-f-multimeter-measures",
      "shape": "fact",
      "tags": [
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Multimeter Measures",
      "body": "A **multimeter** combines meter functions in one instrument. Voltage and resistance are among the measurements made using a multimeter, and it can also be configured to measure current.",
      "illustration": {
        "imagePrompt": "A handheld digital multimeter with two test probes lying on a workbench.",
        "imageSearchTerm": "digital multimeter test probes",
        "alt": "Digital multimeter with probes",
        "kind": "photo",
        "credit": "Wikimedia Commons · Jacek Halicki · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:2017_Cyfrowy_miernik_uniwersalny.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-multimeter-measures.d8881075.webp"
      },
      "uid": "1e6nlord3fqjd"
    },
    {
      "id": "ht-l11-f-acid-solder",
      "shape": "fact",
      "tags": [
        "components",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Solder to Avoid",
      "body": "**Acid-core solder** should not be used for radio and electronic applications.",
      "uid": "rilfqj1m5wv5h"
    },
    {
      "id": "ht-l11-f-cold-joint",
      "shape": "fact",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Spotting a Cold Solder Joint",
      "body": "A **cold solder joint** made with tin-lead solder has a rough or lumpy surface.",
      "uid": "y6xednfugrol"
    },
    {
      "id": "ht-l11-f-capacitor-ohm",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ohmmeter Across a Capacitor",
      "body": "An ohmmeter connected across a large, discharged capacitor shows **increasing resistance** with time.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: At left, a small inset: ohmmeter probe leads connected across a capacitor, drawn as the standard symbol of two parallel plates. At right, a line chart with no numbers. The vertical axis is the resistance reading and the horizontal axis is time. The curve starts low and rises steadily as time passes.",
        "imageSearchTerm": "Ohmmeter reading across a capacitor",
        "alt": "Ohmmeter reading across a capacitor. The reading rises over time when an ohmmeter is placed across a large, discharged capacitor.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-capacitor-ohm.a770b299.webp"
      },
      "uid": "to4nhq17io396"
    },
    {
      "id": "ht-l11-f-power-off",
      "shape": "fact",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Unpowered for Resistance Checks",
      "body": "When measuring in-circuit resistance with an ohmmeter, the circuit must **not be powered**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple schematic loop: a battery on the left in standard schematic form, a switch in the top wire and a resistor drawn as a standard zigzag on the right. The switch is drawn clearly open, its lever lifted, with the Power off tag beside it. Below the loop, a handheld ohmmeter with a blank light screen and an ohm sign on its face; its red and black test leads clip onto the two ends of the resistor. A caption at the bottom states the rule.",
        "imageSearchTerm": "Measuring resistance with the power off",
        "alt": "An ohmmeter's leads clipped across a resistor in a battery circuit whose switch is open and marked power off: in-circuit resistance is measured with the circuit unpowered.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l11-f-power-off.416219d7.webp"
      },
      "uid": "1kts8lw1vo932s"
    },
    {
      "id": "ht-l11-q-current-series",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee switches a multimeter to read the current through a lamp. How is it hooked to the lamp?"
      },
      "options": [
        {
          "modality": "text",
          "value": "In phase"
        },
        {
          "modality": "text",
          "value": "In parallel"
        },
        {
          "modality": "text",
          "value": "In series"
        },
        {
          "modality": "text",
          "value": "In quadrature"
        }
      ],
      "correctIndex": 2,
      "explanation": "Current is read with the meter in series with the component. Parallel is how voltage is read.",
      "uid": "i4lc2k9p8xgc"
    },
    {
      "id": "ht-l11-q-resistance-precaution",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A resistor is to be checked with an ohmmeter while still wired in a circuit. What precaution applies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Make sure the circuit is grounded",
          "short": "Circuit is grounded"
        },
        {
          "modality": "text",
          "value": "Make sure the circuit is unpowered",
          "short": "Circuit is unpowered"
        },
        {
          "modality": "text",
          "value": "Make sure applied voltages are correct",
          "short": "Applied voltages correct"
        },
        {
          "modality": "text",
          "value": "Make sure the frequency is set right",
          "short": "Frequency set right"
        }
      ],
      "correctIndex": 1,
      "explanation": "When measuring in-circuit resistance, the circuit must not be powered. Grounding, voltages and frequency are not the precautions.",
      "uid": "8lqa8gravpdy"
    },
    {
      "id": "ht-l11-q-capacitor-reading",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "An ohmmeter is attached to a large capacitor that is fully discharged. What does the reading do?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Resistance falls with time"
        },
        {
          "modality": "text",
          "value": "Reading flips between open and short",
          "short": "Flips open and short"
        },
        {
          "modality": "text",
          "value": "Reading sticks at full scale"
        },
        {
          "modality": "text",
          "value": "Resistance rises with time"
        }
      ],
      "correctIndex": 3,
      "explanation": "An ohmmeter across a large, discharged capacitor shows increasing resistance with time, not a falling, steady or alternating reading.",
      "uid": "1iigrfnflemt5"
    },
    {
      "id": "ht-l11-q-measure-current",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee needs the electric current flowing in a circuit. Which dedicated instrument measures it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An ammeter"
        },
        {
          "modality": "text",
          "value": "A voltmeter"
        },
        {
          "modality": "text",
          "value": "An ohmmeter"
        },
        {
          "modality": "text",
          "value": "An electrometer"
        }
      ],
      "correctIndex": 0,
      "explanation": "An ammeter measures current. A voltmeter reads voltage and an ohmmeter reads resistance.",
      "uid": "w51b9lif1iib"
    },
    {
      "id": "ht-l11-tf-acid-solder",
      "shape": "trueFalse",
      "tags": [
        "components",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Acid-core solder is a suitable choice for radio and electronic work.",
      "isTrue": false,
      "why": "Acid-core solder should not be used for radio and electronic applications; rosin-core is not a type to avoid.",
      "uid": "94dxm6demuho"
    },
    {
      "id": "ht-l11-tf-cold-joint",
      "shape": "trueFalse",
      "tags": [
        "components",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A cold tin-lead solder joint has a rough or lumpy surface.",
      "isTrue": true,
      "why": "A rough or lumpy surface is the characteristic look of a cold joint; a bright or shiny surface is not.",
      "uid": "5sv30d1dl1swt"
    },
    {
      "id": "ht-l11-c-ohmmeter-current",
      "shape": "cloze",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "An ohmmeter finds resistance by applying a small ___ and measuring the resulting voltage.",
      "answer": "current",
      "distractors": [
        "frequency",
        "impedance",
        "reactance"
      ],
      "explanation": "The ohmmeter applies a small current and measures the resulting voltage to find resistance.",
      "uid": "1xxe15m1298obm"
    },
    {
      "id": "ht-l11-p-voltmeter",
      "shape": "pair",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Voltmeter"
      },
      "sideB": {
        "modality": "text",
        "value": "Measures electric potential"
      },
      "uid": "1128vwms11zhy"
    },
    {
      "id": "ht-l11-q-analyzer-resonance",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Before operating on a new frequency, a licensee checks that a newly hung antenna is tuned to it. Which instrument does this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A frequency counter"
        },
        {
          "modality": "text",
          "value": "An ohmmeter"
        },
        {
          "modality": "text",
          "value": "An antenna analyzer"
        },
        {
          "modality": "text",
          "value": "A dummy load on the line"
        }
      ],
      "correctIndex": 2,
      "explanation": "An antenna analyzer determines whether an antenna is resonant at the desired operating frequency. A frequency counter only measures a signal's frequency, an ohmmeter measures resistance, and a dummy load replaces the antenna so tests are not transmitted over the air.",
      "uid": "1t812fa17zmyqy"
    },
    {
      "id": "ht-l11-c-line-loss",
      "shape": "cloze",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "Power lost in a feed line is converted into ___.",
      "answer": "heat",
      "distractors": [
        "harmonics",
        "distortion",
        "reflected power"
      ],
      "explanation": "Power lost in a feed line becomes heat. It is not radiated as harmonics and does not distort the signal.",
      "uid": "md7y9mrb4ko2"
    },
    {
      "id": "ht-l11-tf-meter-damage",
      "shape": "trueFalse",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Measuring voltage with a multimeter on its resistance setting can damage the meter.",
      "isTrue": true,
      "why": "Attempting to measure voltage when using the resistance setting can damage a multimeter.",
      "uid": "csch1pxomaxv"
    },
    {
      "id": "ot-ht-l11-t7c01",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the primary purpose of a dummy load?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To prevent transmitting signals over the air when making tests"
        },
        {
          "modality": "text",
          "value": "To prevent over-modulation of a transmitter"
        },
        {
          "modality": "text",
          "value": "To improve the efficiency of an antenna"
        },
        {
          "modality": "text",
          "value": "To improve the signal-to-noise ratio of a receiver"
        }
      ],
      "correctIndex": 0,
      "explanation": "A dummy load lets a transmitter be tested without putting a signal on the air. It does not prevent over-modulation or improve antennas or receivers.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "i5moox15453lf"
    },
    {
      "id": "ot-ht-l11-t7c03",
      "shape": "mcq",
      "tags": [
        "components",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does a typical RF dummy load consist of?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A low-voltage power supply and an AC relay"
        },
        {
          "modality": "text",
          "value": "A 50-ohm non-inductive resistor mounted on a heat sink"
        },
        {
          "modality": "text",
          "value": "A low-voltage power supply and a DC relay"
        },
        {
          "modality": "text",
          "value": "A 50-ohm inductive reactance mounted in a shielded enclosure"
        }
      ],
      "correctIndex": 1,
      "explanation": "A typical radio frequency (RF) dummy load is a 50-ohm non-inductive resistor on a heat sink, not a power supply with a relay or an inductive reactance. AC stands for alternating current and DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nsrn2119pyiaz"
    },
    {
      "id": "ot-ht-l11-t7c02",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is used to determine if an antenna is resonant at the desired operating frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A VTVM"
        },
        {
          "modality": "text",
          "value": "An antenna analyzer"
        },
        {
          "modality": "text",
          "value": "A Q meter"
        },
        {
          "modality": "text",
          "value": "A frequency counter"
        }
      ],
      "correctIndex": 1,
      "explanation": "An antenna analyzer shows whether an antenna is resonant at the desired operating frequency. A Q meter and frequency counter are not the right tools. VTVM stands for vacuum-tube voltmeter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "4sdyaz2ftezt"
    },
    {
      "id": "ot-ht-l11-t7c08",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which instrument can be used to determine SWR?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voltmeter"
        },
        {
          "modality": "text",
          "value": "Ohmmeter"
        },
        {
          "modality": "text",
          "value": "Iambic pentameter"
        },
        {
          "modality": "text",
          "value": "Directional wattmeter"
        }
      ],
      "correctIndex": 3,
      "explanation": "A directional wattmeter can determine standing wave ratio (SWR). A voltmeter and an ohmmeter are not the instruments for that purpose.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "136ejze1q5o9ma"
    },
    {
      "id": "ot-ht-l11-t7c04",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What reading on an SWR meter indicates a perfect impedance match between the antenna and the feed line?"
      },
      "options": [
        {
          "modality": "text",
          "value": "50:50"
        },
        {
          "modality": "text",
          "value": "Zero"
        },
        {
          "modality": "text",
          "value": "1:1"
        },
        {
          "modality": "text",
          "value": "Full Scale"
        }
      ],
      "correctIndex": 2,
      "explanation": "A standing wave ratio (SWR) of 1:1 means a perfect impedance match between antenna and feed line. 50:50, zero and full scale do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1oojaja1azwcn6"
    },
    {
      "id": "ot-ht-l11-t7c06",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does an SWR reading of 4:1 indicate?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Loss of -4 dB"
        },
        {
          "modality": "text",
          "value": "Good impedance match"
        },
        {
          "modality": "text",
          "value": "Gain of +4 dB"
        },
        {
          "modality": "text",
          "value": "Impedance mismatch"
        }
      ],
      "correctIndex": 3,
      "explanation": "A 4:1 standing wave ratio (SWR) reading indicates an impedance mismatch. It is not a good match and not a gain or loss in dB.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "115u4jl13oimvp"
    },
    {
      "id": "ot-ht-l11-t7c05",
      "shape": "mcq",
      "tags": [
        "feed-lines",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why do most solid-state transmitters reduce output power as SWR increases beyond a certain level?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To protect the RF output amplifier transistors"
        },
        {
          "modality": "text",
          "value": "To comply with FCC rules on spectral purity"
        },
        {
          "modality": "text",
          "value": "Because power supplies cannot supply enough current at high SWR"
        },
        {
          "modality": "text",
          "value": "To lower the SWR on the transmission line"
        }
      ],
      "correctIndex": 0,
      "explanation": "Solid-state transmitters cut power at high standing wave ratio (SWR) to protect the radio frequency (RF) output amplifier transistors. Doing so does not lower the SWR. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1cwvpf72o9x89"
    },
    {
      "id": "ot-ht-l11-t7c07",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What happens to power lost in a feed line?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It increases the SWR"
        },
        {
          "modality": "text",
          "value": "It is radiated as harmonics"
        },
        {
          "modality": "text",
          "value": "It is converted into heat"
        },
        {
          "modality": "text",
          "value": "It distorts the signal"
        }
      ],
      "correctIndex": 2,
      "explanation": "Power lost in a feed line becomes heat. It does not raise standing wave ratio (SWR), radiate as harmonics or distort the signal.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ohid6v1olpr7l"
    },
    {
      "id": "ot-ht-l11-t7c09",
      "shape": "mcq",
      "tags": [
        "feed-lines",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following causes failure of coaxial cables?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Moisture contamination"
        },
        {
          "modality": "text",
          "value": "Solder flux contamination"
        },
        {
          "modality": "text",
          "value": "Rapid fluctuation in transmitter output power"
        },
        {
          "modality": "text",
          "value": "Operation at 100% duty cycle for an extended period"
        }
      ],
      "correctIndex": 0,
      "explanation": "Moisture contamination causes coax failure. Flux, power fluctuation and long duty cycles are not the cause.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "3o3sz91d3mht1"
    },
    {
      "id": "ot-ht-l11-t7c10",
      "shape": "mcq",
      "tags": [
        "feed-lines",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why should the outer jacket of coaxial cable be resistant to ultraviolet light?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Ultraviolet light can increase the resistance of the conductors"
        },
        {
          "modality": "text",
          "value": "Ultraviolet light can increase losses in the cable’s jacket"
        },
        {
          "modality": "text",
          "value": "Ultraviolet and RF signals can mix, causing interference"
        },
        {
          "modality": "text",
          "value": "Ultraviolet light can damage the jacket and allow water to enter the cable"
        }
      ],
      "correctIndex": 3,
      "explanation": "Ultraviolet light can damage the jacket and let water in, and water is what fails coax. It does not change conductor resistance or mix with radio frequency (RF).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1d1fies1wdyig"
    },
    {
      "id": "ot-ht-l11-t7c11",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an advantage of foam-dielectric versus solid-dielectric coaxial cable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It is more resistant to moisture contamination"
        },
        {
          "modality": "text",
          "value": "It has higher voltage breakdown"
        },
        {
          "modality": "text",
          "value": "It has less loss per foot"
        },
        {
          "modality": "text",
          "value": "It has a better impedance match to 50 ohms"
        }
      ],
      "correctIndex": 2,
      "explanation": "Foam-dielectric coax has less loss per foot than solid-dielectric. It is not better at moisture, voltage breakdown or 50-ohm match.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "18okwknx4isoh"
    },
    {
      "id": "ot-ht-l11-t7d01",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which instrument would you use to measure electric potential?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An ammeter"
        },
        {
          "modality": "text",
          "value": "A voltmeter"
        },
        {
          "modality": "text",
          "value": "A potentiometer"
        },
        {
          "modality": "text",
          "value": "An ohmmeter"
        }
      ],
      "correctIndex": 1,
      "explanation": "A voltmeter measures electric potential, the voltage across a part. An ammeter measures current, an ohmmeter measures resistance, and in radio work a potentiometer is a variable resistor rather than a meter.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8ffr681obt65e"
    },
    {
      "id": "ot-ht-l11-t7d04",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which instrument is used to measure electric current?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An ohmmeter"
        },
        {
          "modality": "text",
          "value": "An electrometer"
        },
        {
          "modality": "text",
          "value": "A voltmeter"
        },
        {
          "modality": "text",
          "value": "An ammeter"
        }
      ],
      "correctIndex": 3,
      "explanation": "An ammeter measures electric current. An ohmmeter, electrometer and voltmeter are not the instrument for it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1hozwepjkwkvn"
    },
    {
      "id": "ot-ht-l11-t7d07",
      "shape": "mcq",
      "tags": [
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following measurements are made using a multimeter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Signal strength and noise"
        },
        {
          "modality": "text",
          "value": "Impedance and reactance"
        },
        {
          "modality": "text",
          "value": "Voltage and resistance"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "A multimeter measures voltage and resistance. Signal strength, noise, impedance and reactance are not its measurements.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1g2qvknu7bd9f"
    },
    {
      "id": "ot-ht-l11-t7d02",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is a voltmeter connected to a component to measure applied voltage?"
      },
      "options": [
        {
          "modality": "text",
          "value": "In series"
        },
        {
          "modality": "text",
          "value": "In parallel"
        },
        {
          "modality": "text",
          "value": "In quadrature"
        },
        {
          "modality": "text",
          "value": "In phase"
        }
      ],
      "correctIndex": 1,
      "explanation": "A voltmeter connects in parallel with the component to measure applied voltage, not in series, quadrature or phase.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1951v6c1t4ohf6"
    },
    {
      "id": "ot-ht-l11-t7d03",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "When configured to measure current, how is a multimeter connected to a component?"
      },
      "options": [
        {
          "modality": "text",
          "value": "In series"
        },
        {
          "modality": "text",
          "value": "In parallel"
        },
        {
          "modality": "text",
          "value": "In quadrature"
        },
        {
          "modality": "text",
          "value": "In phase"
        }
      ],
      "correctIndex": 0,
      "explanation": "A multimeter set to measure current connects in series with the component, not in parallel.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1trpoxr11uvkbp"
    },
    {
      "id": "ot-ht-l11-t7d05",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "How does an ohmmeter measure the resistance of a circuit or component?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By applying a small current and measuring the resulting voltage"
        },
        {
          "modality": "text",
          "value": "By placing a variable resistor in parallel with the circuit"
        },
        {
          "modality": "text",
          "value": "By placing a variable resistor in series with the circuit"
        },
        {
          "modality": "text",
          "value": "By applying a variable voltage and measuring the resulting current change"
        }
      ],
      "correctIndex": 0,
      "explanation": "An ohmmeter applies a small current and measures the resulting voltage. It does not use a variable resistor or a variable voltage.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1wkkq7icp8i8s"
    },
    {
      "id": "ot-ht-l11-t7d06",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following can damage a multimeter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Attempting to measure resistance using the voltage setting"
        },
        {
          "modality": "text",
          "value": "Failing to connect one of the probes to ground"
        },
        {
          "modality": "text",
          "value": "Attempting to measure voltage when using the resistance setting"
        },
        {
          "modality": "text",
          "value": "Not allowing it to warm up properly"
        }
      ],
      "correctIndex": 2,
      "explanation": "Trying to measure voltage on the resistance setting can damage a multimeter. The other listed actions do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1l0oncc76gm18"
    },
    {
      "id": "ot-ht-l11-t7d10",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What reading indicates that an ohmmeter is connected across a large, discharged capacitor?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Increasing resistance with time"
        },
        {
          "modality": "text",
          "value": "Decreasing resistance with time"
        },
        {
          "modality": "text",
          "value": "Steady full-scale reading"
        },
        {
          "modality": "text",
          "value": "Alternating between open and short circuit"
        }
      ],
      "correctIndex": 0,
      "explanation": "Across a large, discharged capacitor an ohmmeter shows increasing resistance with time, not decreasing, steady or alternating readings.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qgm7oj1tucyjf"
    },
    {
      "id": "ot-ht-l11-t7d11",
      "shape": "mcq",
      "tags": [
        "test-equipment",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following precautions should be taken when measuring in-circuit resistance with an ohmmeter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Ensure that the applied voltages are correct"
        },
        {
          "modality": "text",
          "value": "Ensure that the circuit is not powered"
        },
        {
          "modality": "text",
          "value": "Ensure that the circuit is grounded"
        },
        {
          "modality": "text",
          "value": "Ensure that the circuit is operating at the correct frequency"
        }
      ],
      "correctIndex": 1,
      "explanation": "For in-circuit resistance, the circuit must not be powered. Checking voltages, grounding or frequency are not the precautions.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1nubeawhenw5o"
    },
    {
      "id": "ot-ht-l11-t7d08",
      "shape": "mcq",
      "tags": [
        "components",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following types of solder should not be used for radio and electronic applications?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Acid-core solder"
        },
        {
          "modality": "text",
          "value": "Lead-tin solder"
        },
        {
          "modality": "text",
          "value": "Rosin-core solder"
        },
        {
          "modality": "text",
          "value": "Tin-copper solder"
        }
      ],
      "correctIndex": 0,
      "explanation": "Acid-core solder should not be used for radio and electronic work. Lead-tin, rosin-core and tin-copper are not the types to avoid.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "qzc03dfh7tm9"
    },
    {
      "id": "ot-ht-l11-t7d09",
      "shape": "mcq",
      "tags": [
        "components",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the characteristic appearance of a cold tin-lead solder joint?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Dark black spots"
        },
        {
          "modality": "text",
          "value": "A bright or shiny surface"
        },
        {
          "modality": "text",
          "value": "A rough or lumpy surface"
        },
        {
          "modality": "text",
          "value": "A greenish tinge"
        }
      ],
      "correctIndex": 2,
      "explanation": "A cold tin-lead joint has a rough or lumpy surface. A bright or shiny surface is not its mark.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1cn9ili1tldmxi"
    },
    {
      "id": "ht-l12-f-ssb-am",
      "shape": "fact",
      "tags": [
        "modulation",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SSB Is Amplitude Modulation",
      "body": "**Single sideband (SSB)** is a form of amplitude modulation (AM).",
      "uid": "17llod236r1im"
    },
    {
      "id": "ht-l12-f-fm-pm-packet-repeater",
      "shape": "fact",
      "tags": [
        "modulation",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "FM or PM for Packet and Repeaters",
      "body": "**FM or PM** is the modulation commonly used for two jobs: very high frequency (VHF) packet radio, and VHF and ultra high frequency (UHF) voice repeaters. Here FM means frequency modulated and PM means phase modulated.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A two-column chart. The left column is a box for frequency modulated (FM) or phase modulated (PM). Two arrows run from it to two job boxes: VHF packet radio, and VHF and UHF voice repeaters. The right column is a box for single sideband (SSB). It sits inside a larger outlined group marked amplitude modulation (AM), so SSB reads as a form of AM. Arrows run from the SSB box to two notes: weak-signal voice on VHF and UHF, and upper sideband on 10-meter HF, VHF and UHF. Use plain rectangles and arrows only, with no waveforms or radios.",
        "imageSearchTerm": "Which voice and data mode does which job",
        "alt": "Which voice and data mode does which job: each modulation type matched to the job it commonly does, with single sideband shown in the amplitude modulation family.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-fm-pm-packet-repeater.7b7fe6ce.webp"
      },
      "uid": "qm5vdn1xp81bt"
    },
    {
      "id": "ht-l12-f-ssb-weak-signal",
      "shape": "fact",
      "tags": [
        "modulation",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SSB for Weak-Signal Contacts",
      "body": "Single sideband (SSB) is the voice mode often used for long-distance, **weak-signal** contacts on the very high frequency (VHF) and ultra high frequency (UHF) bands.",
      "uid": "1w9cyh68uhvwk"
    },
    {
      "id": "ht-l12-f-upper-sideband",
      "shape": "fact",
      "tags": [
        "modulation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Upper Sideband Is the Norm",
      "body": "**Upper sideband** is normally used for single sideband (SSB) communications on 10-meter high frequency (HF), very high frequency (VHF) and ultra high frequency (UHF).",
      "uid": "3ohb3cdbl3iq"
    },
    {
      "id": "ht-l12-f-ssb-narrower",
      "shape": "fact",
      "tags": [
        "modulation",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SSB Is Narrower Than FM",
      "body": "Compared with frequency modulated (FM) signals, single sideband (SSB) signals have **narrower bandwidth**.",
      "uid": "cq8hl81wv1q2m"
    },
    {
      "id": "ht-l12-f-fm-one-signal",
      "shape": "fact",
      "tags": [
        "modulation",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Drawback of FM",
      "body": "A disadvantage of frequency modulated (FM) compared with single sideband is that **only one signal can be received at a time**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side with the same setup: two transmitting stations at the top, one blue and one coral, both sending arrows down to one receiver with a speaker. Both arrows reach the receiver in both panels; the difference is only what comes out of the speaker. Left panel, under the FM label: only blue sound waves come out of the speaker. Right panel, under the single sideband label: blue and coral sound waves both come out, overlapping.",
        "imageSearchTerm": "Two stations on one frequency",
        "alt": "Two stations transmit to one receiver: with frequency modulated (FM), only one signal comes out of the speaker; with single sideband (SSB), both are heard.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-fm-one-signal.d2614df0.webp"
      },
      "uid": "v2zke11woos83"
    },
    {
      "id": "ht-l12-f-cw-narrowest",
      "shape": "fact",
      "tags": [
        "emissions",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "CW Is the Narrowest Signal",
      "body": "**International Morse code telegraphy (CW)** has the narrowest bandwidth of the signal types compared.",
      "uid": "5s8062icrivy"
    },
    {
      "id": "ht-l12-f-cw-150-hz",
      "shape": "fact",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "CW Bandwidth: About 150 Hz",
      "body": "An international Morse code telegraphy (CW) signal needs about **150 hertz (Hz)** of bandwidth.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a Morse code key wired to a small transmitter box. On the right, a large spectrum display: a horizontal frequency axis with no tick values, and one tall, very narrow peak in the middle. A gold bracket at the base of the peak spans its width and carries the bandwidth label. The axis carries the word Frequency.",
        "imageSearchTerm": "How wide a Morse code signal is",
        "alt": "A Morse code key and transmitter beside a spectrum display with one very narrow peak: an international Morse code telegraphy (CW) signal about 150 hertz (Hz) wide.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-cw-150-hz.d0de4967.webp"
      },
      "uid": "2ax8ci1ijvcfw"
    },
    {
      "id": "ht-l12-f-ssb-3-khz",
      "shape": "fact",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "SSB Voice Is About 3 kHz",
      "body": "A typical single sideband (SSB) voice signal is about **3 kilohertz (kHz)** wide.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a desk microphone wired to a small transmitter box. On the right, a large spectrum display with a horizontal frequency axis and no tick values. In the middle, a signal block with an uneven, rippled top, like speech. A gold bracket at its base spans its width and carries the bandwidth label. The axis carries the word Frequency.",
        "imageSearchTerm": "How wide single sideband voice is",
        "alt": "A microphone and transmitter beside a spectrum display: a single sideband (SSB) voice signal about 3 kilohertz (kHz) wide.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-ssb-3-khz.98d22299.webp"
      },
      "uid": "1dihjw859iefa"
    },
    {
      "id": "ht-l12-f-fm-10-15-khz",
      "shape": "fact",
      "tags": [
        "emissions",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "FM Repeater Voice Is 10–15 kHz",
      "body": "A frequency modulated (FM) voice signal on very high frequency (VHF) repeaters is **between 10 and 15 kilohertz (kHz)** wide.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a repeater tower with an antenna on top, sending a signal arrow to the right. On the right, a large spectrum display with a horizontal frequency axis and no tick values. In the middle, a broad, rounded signal hump with steep sides. A gold bracket at its base spans its width and carries the bandwidth label. The axis carries the word Frequency.",
        "imageSearchTerm": "How wide a repeater's voice signal is",
        "alt": "A repeater beside a spectrum display with a broad hump: a frequency modulated (FM) voice signal on very high frequency (VHF) repeaters, 10 to 15 kilohertz (kHz) wide.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-fm-10-15-khz.7d3e88c0.webp"
      },
      "uid": "1gcqj081xrdsie"
    },
    {
      "id": "ht-l12-f-tv-6-mhz",
      "shape": "fact",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Four horizontal bars on one shared scale, ordered from narrowest at the top (CW) to widest at the bottom (AM fast-scan TV). The CW, SSB voice and fast-scan TV entries are marked as about their stated values. The FM repeater voice entry is a bar spanning 10 to 15 kHz. The horizontal axis is logarithmic, from 100 Hz to 10 MHz, and is labelled as such, so each tick is ten times the one before.",
        "imageSearchTerm": "How Wide Each Signal Type Is",
        "alt": "How wide each signal is: Morse code (CW) about 150 hertz, single sideband (SSB) voice about 3 kilohertz, frequency modulated (FM) voice 10 to 15 kilohertz, fast-scan TV about 6 megahertz.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-tv-6-mhz.9d39d771.webp"
      },
      "title": "Fast-Scan TV Is About 6 MHz",
      "body": "Amplitude modulated (AM) **fast-scan TV** transmissions are about 6 megahertz (MHz) wide.",
      "uid": "12h8byd1m0l821"
    },
    {
      "id": "ht-l12-q-weak-signal-mode",
      "shape": "mcq",
      "tags": [
        "modulation",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee tries to reach a faint, distant station on very high or ultra high frequency. Which voice mode is often chosen?"
      },
      "options": [
        {
          "modality": "text",
          "value": "FM"
        },
        {
          "modality": "text",
          "value": "SSB"
        },
        {
          "modality": "text",
          "value": "PM"
        },
        {
          "modality": "text",
          "value": "DRM"
        }
      ],
      "correctIndex": 1,
      "explanation": "Single sideband (SSB) is the voice mode often used for weak-signal very high frequency (VHF) and ultra high frequency (UHF) contacts. Frequency modulated (FM) and phase modulated (PM) suit local repeaters, and Digital Radio Mondiale (DRM) is not the usual choice.",
      "uid": "1gqufwzr5rbh9"
    },
    {
      "id": "ht-l12-q-tv-bandwidth",
      "shape": "mcq",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which signal type takes up roughly 6 megahertz (MHz) of a band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Single sideband voice"
        },
        {
          "modality": "text",
          "value": "Morse code telegraphy"
        },
        {
          "modality": "text",
          "value": "Fast-scan television"
        },
        {
          "modality": "text",
          "value": "Frequency modulated voice"
        }
      ],
      "correctIndex": 2,
      "explanation": "Amplitude modulated (AM) fast-scan TV is about 6 MHz wide. Single sideband voice is about 3 kilohertz, and Morse code telegraphy needs far less.",
      "uid": "1poyc8ebf1y9s"
    },
    {
      "id": "ht-l12-q-ssb-3-khz",
      "shape": "mcq",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which signal is typically about 3 kilohertz (kHz) wide?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Morse code telegraphy (CW)"
        },
        {
          "modality": "text",
          "value": "Single sideband (SSB) voice"
        },
        {
          "modality": "text",
          "value": "Frequency modulated (FM) voice"
        },
        {
          "modality": "text",
          "value": "Fast-scan video (amplitude modulated)",
          "short": "Fast-scan video"
        }
      ],
      "correctIndex": 1,
      "explanation": "A typical single sideband (SSB) voice signal is about 3 kHz wide. Morse code telegraphy (CW) is about 150 hertz and frequency modulated (FM) repeater voice is 10 to 15 kHz.",
      "uid": "11pm69q17tj3ae"
    },
    {
      "id": "ht-l12-q-repeater-modulation",
      "shape": "mcq",
      "tags": [
        "modulation",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A club builds a local very high frequency (VHF) voice repeater. What modulation is commonly used?"
      },
      "options": [
        {
          "modality": "text",
          "value": "SSB or AM"
        },
        {
          "modality": "text",
          "value": "AM or PSK"
        },
        {
          "modality": "text",
          "value": "PSK or SSB"
        },
        {
          "modality": "text",
          "value": "FM or PM"
        }
      ],
      "correctIndex": 3,
      "explanation": "Frequency modulated (FM) or phase modulated (PM) is commonly used for voice repeaters. Single sideband (SSB), amplitude modulated (AM) and Phase Shift Keying (PSK) are not the common choice.",
      "uid": "osmvb01d2v73g"
    },
    {
      "id": "ht-l12-tf-lower-sideband",
      "shape": "trueFalse",
      "tags": [
        "modulation",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Lower sideband is normally used for single sideband (SSB) voice on 10 meters, very high frequency (VHF) and ultra high frequency (UHF).",
      "isTrue": false,
      "why": "Upper sideband is the one normally used on 10-meter high frequency, very high frequency and ultra high frequency.",
      "uid": "15zhbwr1sclt9f"
    },
    {
      "id": "ht-l12-tf-ssb-less-space",
      "shape": "trueFalse",
      "tags": [
        "emissions",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A typical single sideband (SSB) voice signal takes up less space on a band than frequency modulated (FM) voice on repeaters.",
      "isTrue": true,
      "why": "Single sideband voice is about 3 kilohertz (kHz) wide, while frequency modulated repeater voice is between 10 and 15 kHz wide.",
      "uid": "t9list8n5mwh"
    },
    {
      "id": "ht-l12-c-cw-bandwidth",
      "shape": "cloze",
      "tags": [
        "emissions",
        "units"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "An international Morse code telegraphy (CW) signal needs about ___ of bandwidth.",
      "answer": "150 Hz",
      "distractors": [
        "2.4 kHz",
        "1000 Hz",
        "15 kHz"
      ],
      "explanation": "CW needs about 150 hertz (Hz), the narrowest of the signal types compared. The kilohertz (kHz) figures are far too wide.",
      "uid": "1mfny8d1fgy9xl"
    },
    {
      "id": "ht-l12-p-fm-repeater-width",
      "shape": "pair",
      "tags": [
        "emissions",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Frequency modulated (FM) voice signal on very high frequency (VHF) repeaters"
      },
      "sideB": {
        "modality": "text",
        "value": "Between 10 and 15 kilohertz (kHz) wide"
      },
      "uid": "1jvi9d711tqi8n"
    },
    {
      "id": "ht-l12-f-beacon-telemetry",
      "shape": "fact",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Beacons Send",
      "body": "The **telemetry** that satellite beacons typically send is the health and status of the satellite.",
      "uid": "12m7xy27rvkgo"
    },
    {
      "id": "ht-l12-f-beacon-defined",
      "shape": "fact",
      "tags": [
        "satellites"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "A Satellite Beacon Defined",
      "body": "A **satellite beacon** is a transmission from a satellite that contains status information.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple satellite at upper left sends a beacon transmission, drawn as outgoing waves. A callout box on the waves holds the telemetry content: the health and status of the satellite. Below, several plain receiving antennas on the ground, drawn alike and unlabelled by owner, all pick up the same transmission. A note beside them says anyone may receive it.",
        "imageSearchTerm": "A satellite beacon and its telemetry",
        "alt": "A satellite beacon and its telemetry. A beacon is a transmission carrying the satellite's health and status, and anyone may receive it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-beacon-defined.607764e2.webp"
      },
      "uid": "2tiii0x2w8i2"
    },
    {
      "id": "ht-l12-f-tracking-outputs",
      "shape": "fact",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Tracking Programs Provide",
      "body": "A satellite **tracking program** provides all of these: maps showing the real-time position of the satellite track over Earth; the time, azimuth and elevation of the start, maximum altitude and end of a pass; and the apparent frequency of the transmission, including Doppler shift effects.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right block diagram. An input box for the Keplerian elements has an arrow into a central box for the satellite tracking program. Three arrows fan out from the program to three output boxes. The first is a small world map with a curved ground track. The second is a pass table with time, azimuth and elevation for start, maximum altitude and end. The third is a frequency readout marked as apparent frequency including Doppler shift. Show no numbers in the table.",
        "imageSearchTerm": "Tracking program input and outputs",
        "alt": "Tracking program input and outputs: what goes into a satellite tracking program and the three things it gives back.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-tracking-outputs.4028139e.webp"
      },
      "uid": "xpd59qwb10xo"
    },
    {
      "id": "ht-l12-f-keplerian-input",
      "shape": "fact",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Keplerian Elements Feed Trackers",
      "body": "Satellite tracking programs take the **Keplerian elements** as their input.",
      "uid": "107a3ls17ekv6u"
    },
    {
      "id": "ht-l12-f-doppler-shift",
      "shape": "fact",
      "tags": [
        "satellites",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Doppler Shift Explained",
      "body": "**Doppler shift** is an observed change in signal frequency caused by relative motion between the satellite and the Earth station.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A curved arc of Earth's surface along the bottom with a small Earth station antenna on it. Above it, a satellite is drawn at three positions along a curved pass, with a motion arrow along the path. Signal waves run from each satellite position down to the station. Beside the station, a small frequency readout shows the observed frequency differing from position to position. Do not show which way the frequency changes.",
        "imageSearchTerm": "Doppler shift from relative motion",
        "alt": "Doppler shift from relative motion. The frequency a ground station observes changes because the satellite and the station are moving relative to each other.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-doppler-shift.5805758b.webp"
      },
      "uid": "x69ni815q47jm"
    },
    {
      "id": "ht-l12-f-spin-fading",
      "shape": "fact",
      "tags": [
        "satellites",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Causes Spin Fading",
      "body": "**Spin fading** of satellite signals is caused by rotation of the satellite and its antennas. It is a separate effect from Doppler shift, which comes from relative motion.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a simple box satellite with antenna rods, with a curved rotation arrow around it. Its antennas are shown at two or three rotation angles as faint ghost outlines. Signal waves run toward a ground station on the right. Above the station, a small strength-versus-time trace rises and dips repeatedly to show fading. A small side note separates this from Doppler shift, which comes from relative motion.",
        "imageSearchTerm": "Spin fading from a rotating satellite",
        "alt": "Spin fading from a rotating satellite. Spin fading comes from the satellite and its antennas rotating, not from Doppler shift.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-spin-fading.2af7903a.webp"
      },
      "uid": "xda7hd1p5h731"
    },
    {
      "id": "ht-l12-f-satellite-modes",
      "shape": "fact",
      "tags": [
        "satellites",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Modes Satellites Commonly Use",
      "body": "Amateur radio satellites commonly use **single sideband (SSB)**, frequency modulated (FM) and international Morse code telegraphy (CW)/data.",
      "uid": "1lk2q11m2gi27"
    },
    {
      "id": "ht-l12-f-u-v-mode",
      "shape": "fact",
      "tags": [
        "satellites",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple schematic. On the left, an Earth station. On the right, a satellite drawn as a plain box with two panels. A solid arrow points up from the Earth station to the satellite and is labelled as the uplink in the 70-centimeter band. A second arrow points down from the satellite to the Earth station and is labelled as the downlink in the 2-meter band.",
        "imageSearchTerm": "U/V Mode: Uplink and Downlink Bands",
        "alt": "U/V mode: the uplink from the Earth station to the satellite is in the 70-centimeter band, and the downlink is in the 2-meter band.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-u-v-mode.80685c32.webp"
      },
      "title": "U/V Mode Bands",
      "body": "A satellite operating in **U/V mode** has its uplink in the 70-centimeter band and its downlink in the 2-meter band.",
      "uid": "1ltcema1gn6qpy"
    },
    {
      "id": "ht-l12-f-leo-orbit",
      "shape": "fact",
      "tags": [
        "satellites"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "LEO: Low Earth Orbit",
      "body": "**Low Earth Orbit (LEO)** has a period of around 100 minutes.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Earth as a plain circle centered in the frame, with a thin orbit ring close around it. A small satellite sits on the ring with a curved arrow showing one full loop. A note marks the period of around 100 minutes. On Earth's surface, a small antenna is labeled as an Earth station, defined as on or within 50 km of the surface. Do not mark an orbit altitude.",
        "imageSearchTerm": "Low Earth Orbit",
        "alt": "Low Earth Orbit (LEO): a satellite circling close around Earth with a period of around 100 minutes, and an Earth station on the surface.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-leo-orbit.92063ece.webp"
      },
      "uid": "c8mu3j1djk369"
    },
    {
      "id": "ht-l12-f-telemetry-anyone",
      "shape": "fact",
      "tags": [
        "satellites",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Anyone May Receive Telemetry",
      "body": "**Anyone** is permitted to receive telemetry from an amateur radio satellite.",
      "uid": "9yba9kms5tly"
    },
    {
      "id": "ht-l12-f-excess-erp",
      "shape": "fact",
      "tags": [
        "satellites",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Excess Uplink Power Blocks Others",
      "body": "Using excessive effective radiated power (ERP) on a satellite uplink **blocks access by other users**.",
      "uid": "137erlycn72us"
    },
    {
      "id": "ht-l12-f-uplink-check",
      "shape": "fact",
      "tags": [
        "satellites",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Matching the Beacon",
      "body": "On a linear transponder satellite, uplink power is neither too low nor too high when the operator's signal strength on the **downlink** is about the same as the beacon.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two side-by-side panels, each a simple spectrum display of a linear transponder satellite's downlink, with signal peaks as vertical bars. Left panel: the beacon bar and your signal bar are about equal in height, with a few other users' bars nearby; mark it correct. Right panel: your signal bar towers over the beacon and spreads wide, with the other users' bars shrunk or squeezed out; mark that this blocks access by other users. Mark the beacon in both panels.",
        "imageSearchTerm": "Setting uplink power by the beacon",
        "alt": "Setting uplink power by the beacon: a downlink where your signal matches the beacon (correct power) beside one where excessive uplink power crowds out other users.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l12-f-uplink-check.9e0247ba.webp"
      },
      "uid": "jzhkh3tj1ltd"
    },
    {
      "id": "ht-l12-d-earth-station",
      "shape": "definition",
      "tags": [
        "satellites",
        "rules"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "Earth station"
      },
      "definition": {
        "modality": "text",
        "value": "An amateur station on, or within 50 km of, Earth's surface, intended for communications with space stations or with other such stations via objects in space",
        "short": "Amateur station near Earth's surface for space links"
      },
      "uid": "1dmxegw1rsluqa"
    },
    {
      "id": "ht-l12-d-erp",
      "shape": "definition",
      "tags": [
        "power",
        "satellites"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "ERP"
      },
      "definition": {
        "modality": "text",
        "value": "Effective radiated power: the power supplied to the antenna times its gain relative to a half-wave dipole in a given direction",
        "short": "Antenna power times gain over a half-wave dipole"
      },
      "uid": "ehffc51ay6jhn"
    },
    {
      "id": "ht-l12-q-pass-times",
      "shape": "mcq",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "An operator wants the time, azimuth and elevation for the start, peak and end of a satellite pass. What supplies them?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A satellite tracking program"
        },
        {
          "modality": "text",
          "value": "A satellite beacon signal"
        },
        {
          "modality": "text",
          "value": "A frequency shift reading"
        },
        {
          "modality": "text",
          "value": "A spin fading measurement"
        }
      ],
      "correctIndex": 0,
      "explanation": "A satellite tracking program provides pass times, azimuth and elevation. A beacon sends status information, not pass predictions.",
      "uid": "q75vkr1ke85pn"
    },
    {
      "id": "ht-l12-q-fading-rotation",
      "shape": "mcq",
      "tags": [
        "satellites",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A satellite signal fades in and out because the satellite and its antennas rotate. What is this effect called?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Doppler shift"
        },
        {
          "modality": "text",
          "value": "Spin fading"
        },
        {
          "modality": "text",
          "value": "Multipath fading"
        },
        {
          "modality": "text",
          "value": "Solar noise"
        }
      ],
      "correctIndex": 1,
      "explanation": "Rotation of the satellite and its antennas causes spin fading. Doppler shift is a frequency change from relative motion, not a fade. Multipath fading comes from reflected signals, and solar noise is interference from the sun, not rotation.",
      "uid": "anp2981nxvkr8"
    },
    {
      "id": "ht-l12-q-overdriven-uplink",
      "shape": "mcq",
      "tags": [
        "satellites",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A station overdrives a satellite uplink with far too much effective radiated power (ERP). What is the effect?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It overloads the satellite batteries",
          "short": "Overloads the batteries"
        },
        {
          "modality": "text",
          "value": "It reboots the control computer"
        },
        {
          "modality": "text",
          "value": "It blocks access by other users"
        },
        {
          "modality": "text",
          "value": "It commands an improper mode"
        }
      ],
      "correctIndex": 2,
      "explanation": "Excessive ERP blocks access by other users. It does not overload the batteries, reboot the computer or command an improper mode.",
      "uid": "t2av366ri9vu"
    },
    {
      "id": "ht-l12-q-u-v-bands",
      "shape": "mcq",
      "tags": [
        "satellites",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A satellite works in U/V mode. Which pairing of uplink (up) and downlink (down) bands fits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Up: 15-meter, down: 10-meter"
        },
        {
          "modality": "text",
          "value": "Up: 2-meter, down: 70-centimeter"
        },
        {
          "modality": "text",
          "value": "Up: 70-centimeter, down: 2-meter"
        },
        {
          "modality": "text",
          "value": "Up: 6-meter, down: 1.25-meter"
        }
      ],
      "correctIndex": 2,
      "explanation": "U/V mode means the uplink is in the 70-centimeter band and the downlink is in the 2-meter band. The reverse pairing and the 15/10-meter pairing are wrong.",
      "uid": "a417sb1v4cm1x"
    },
    {
      "id": "ht-l12-tf-telemetry-key",
      "shape": "trueFalse",
      "tags": [
        "satellites",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Anyone is permitted to receive telemetry from an amateur radio satellite.",
      "isTrue": true,
      "why": "Receiving amateur satellite telemetry is open to anyone.",
      "uid": "1uckjlzvypr11"
    },
    {
      "id": "ht-l12-tf-leo-elevation",
      "shape": "trueFalse",
      "tags": [
        "satellites"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "LEO stands for Low Elevation Orbit, which has a period of around 100 minutes.",
      "isTrue": false,
      "why": "LEO stands for Low Earth Orbit. It does not mean low energy, low elevation or low equilibrium orbit.",
      "uid": "sp6s7d6f8g89"
    },
    {
      "id": "ht-l12-c-keplerian",
      "shape": "cloze",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A satellite tracking program takes the ___ elements as its input.",
      "answer": "Keplerian",
      "distractors": [
        "Doppler",
        "Telemetry",
        "Beacon"
      ],
      "explanation": "The Keplerian elements are the input to a tracking program. Doppler shift is something the program predicts, and beacons send telemetry on the satellite's health and status; neither is a tracking input.",
      "uid": "4npb59188j2il"
    },
    {
      "id": "ht-l12-p-spin-fading-cause",
      "shape": "pair",
      "tags": [
        "satellites",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Spin fading"
      },
      "sideB": {
        "modality": "text",
        "value": "Rotation of satellite and its antennas"
      },
      "uid": "1aindow1itp8ey"
    },
    {
      "id": "ht-l12-tf-ssb-is-am",
      "shape": "trueFalse",
      "tags": [
        "modulation",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Single sideband (SSB) is a form of amplitude modulation (AM).",
      "isTrue": true,
      "why": "Single sideband is a form of amplitude modulation.",
      "uid": "7yuzh11xe833v"
    },
    {
      "id": "ht-l12-q-narrowest-signal",
      "shape": "mcq",
      "tags": [
        "emissions",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee wants the signal that needs the least room on a band. Which type fits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Single sideband (SSB) voice"
        },
        {
          "modality": "text",
          "value": "Frequency modulated (FM) voice"
        },
        {
          "modality": "text",
          "value": "Morse code telegraphy (CW)"
        },
        {
          "modality": "text",
          "value": "Slow-scan television"
        }
      ],
      "correctIndex": 2,
      "explanation": "CW has the narrowest bandwidth, about 150 hertz. Single sideband voice, frequency modulated voice and slow-scan TV are all wider.",
      "uid": "13gpc2t1jq5mmb"
    },
    {
      "id": "ht-l12-tf-fm-one-signal",
      "shape": "trueFalse",
      "tags": [
        "modulation",
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A disadvantage of frequency modulated (FM) compared with single sideband is that only one signal can be received at a time.",
      "isTrue": true,
      "why": "Only one signal can be received at a time with FM. Poorer voice quality and harder tuning are not its drawbacks.",
      "uid": "kxk08p7cbgq7"
    },
    {
      "id": "ht-l12-q-beacon-content",
      "shape": "mcq",
      "tags": [
        "satellites",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "What telemetry does a satellite beacon typically send?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Strength of the signals it receives",
          "short": "Received signal strength"
        },
        {
          "modality": "text",
          "value": "Health and status of the satellite",
          "short": "Health and status"
        },
        {
          "modality": "text",
          "value": "Time of day to a tenth of a second",
          "short": "Time of day"
        },
        {
          "modality": "text",
          "value": "The satellite's Keplerian elements",
          "short": "Keplerian elements"
        }
      ],
      "correctIndex": 1,
      "explanation": "Beacons typically send the health and status of the satellite. Received signal strength and time of day are not what they typically send.",
      "uid": "1f8202714hop6j"
    },
    {
      "id": "ht-l12-q-uplink-level",
      "shape": "mcq",
      "tags": [
        "satellites",
        "power"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "On a linear transponder satellite, what shows that a station's uplink power is neither too low nor too high?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A good signal report in the telemetry data",
          "short": "Telemetry signal report"
        },
        {
          "modality": "text",
          "value": "No distortion heard on the downlink",
          "short": "No downlink distortion"
        },
        {
          "modality": "text",
          "value": "Downlink signal about as strong as the beacon",
          "short": "Downlink matches beacon"
        },
        {
          "modality": "text",
          "value": "Louder than others on an internet receiver",
          "short": "Beats others online"
        }
      ],
      "correctIndex": 2,
      "explanation": "Uplink power is about right when the downlink signal strength is about the same as the beacon. Telemetry reports, distortion and internet comparisons are not the way.",
      "uid": "5z3ensia5f4a"
    },
    {
      "id": "ht-l12-tf-satellite-modes",
      "shape": "trueFalse",
      "tags": [
        "satellites",
        "modulation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Amateur radio satellites commonly use only frequency modulated (FM).",
      "isTrue": false,
      "why": "They commonly use single sideband (SSB), FM and international Morse code telegraphy (CW)/data, not FM alone.",
      "uid": "iw0q3v178ocnx"
    },
    {
      "id": "ht-l12-q-doppler-scenario",
      "shape": "mcq",
      "tags": [
        "satellites",
        "propagation"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "During a pass, a satellite signal drifts in frequency because the satellite and the Earth station move relative to each other. What is this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Spin fading of the signal"
        },
        {
          "modality": "text",
          "value": "A special digital mode"
        },
        {
          "modality": "text",
          "value": "A change in the satellite orbit"
        },
        {
          "modality": "text",
          "value": "Doppler shift of the signal"
        }
      ],
      "correctIndex": 3,
      "explanation": "Doppler shift is an observed frequency change from relative motion. It is not an orbit change or a digital mode, and spin fading comes from rotation.",
      "uid": "1vd6cd51u3fyqt"
    },
    {
      "id": "ot-ht-l12-t8a01",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a form of amplitude modulation?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Spread spectrum"
        },
        {
          "modality": "text",
          "value": "Packet radio"
        },
        {
          "modality": "text",
          "value": "Single sideband"
        },
        {
          "modality": "text",
          "value": "Phase shift keying (PSK)"
        }
      ],
      "correctIndex": 2,
      "explanation": "Single sideband is a form of amplitude modulation. Spread spectrum, packet radio and PSK are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1qde92e1exgaka"
    },
    {
      "id": "ot-ht-l12-t8a02",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of modulation is commonly used for VHF packet radio transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "FM or PM"
        },
        {
          "modality": "text",
          "value": "SSB"
        },
        {
          "modality": "text",
          "value": "AM"
        },
        {
          "modality": "text",
          "value": "PSK"
        }
      ],
      "correctIndex": 0,
      "explanation": "Frequency modulation (FM) or phase modulation (PM) is commonly used for very high frequency (VHF) packet radio. Single sideband (SSB), amplitude modulation (AM) and Phase Shift Keying (PSK) are not the common choice.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "vh6mvz1148dk5"
    },
    {
      "id": "ot-ht-l12-t8a04",
      "shape": "mcq",
      "tags": [
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which type of modulation is commonly used for VHF and UHF voice repeaters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "AM"
        },
        {
          "modality": "text",
          "value": "SSB"
        },
        {
          "modality": "text",
          "value": "PSK"
        },
        {
          "modality": "text",
          "value": "FM or PM"
        }
      ],
      "correctIndex": 3,
      "explanation": "Very high frequency (VHF) and ultra high frequency (UHF) voice repeaters commonly use frequency modulation (FM) or phase modulation (PM), not amplitude modulation (AM), single sideband (SSB) or Phase Shift Keying (PSK).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1qr3ntg18am3la"
    },
    {
      "id": "ot-ht-l12-t8a03",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which type of voice mode is often used for long-distance (weak signal) contacts on the VHF and UHF bands?"
      },
      "options": [
        {
          "modality": "text",
          "value": "FM"
        },
        {
          "modality": "text",
          "value": "DRM"
        },
        {
          "modality": "text",
          "value": "SSB"
        },
        {
          "modality": "text",
          "value": "PM"
        }
      ],
      "correctIndex": 2,
      "explanation": "Single sideband (SSB) is the voice mode often used for long-distance weak-signal contacts on very high frequency (VHF) and ultra high frequency (UHF). FM stands for frequency modulated, DRM stands for Digital Radio Mondiale, and PM stands for phase modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "rqalx31shhq23"
    },
    {
      "id": "ot-ht-l12-t8a06",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which sideband is normally used for 10-meter HF, VHF, and UHF single-sideband communications?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Upper sideband"
        },
        {
          "modality": "text",
          "value": "Lower sideband"
        },
        {
          "modality": "text",
          "value": "Suppressed sideband"
        },
        {
          "modality": "text",
          "value": "Inverted sideband"
        }
      ],
      "correctIndex": 0,
      "explanation": "Upper sideband is the one normally used for single sideband (SSB) on 10 meters, very high frequency (VHF) and ultra high frequency (UHF). HF stands for high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "17vqd67vcubsz"
    },
    {
      "id": "ot-ht-l12-t8a07",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is one characteristic of single sideband (SSB) compared to FM?"
      },
      "options": [
        {
          "modality": "text",
          "value": "SSB signals are easier to tune in correctly"
        },
        {
          "modality": "text",
          "value": "SSB signals are less susceptible to interference"
        },
        {
          "modality": "text",
          "value": "SSB signals have narrower bandwidth"
        },
        {
          "modality": "text",
          "value": "SSB signals are less susceptible to high SWR"
        }
      ],
      "correctIndex": 2,
      "explanation": "SSB signals have narrower bandwidth than frequency modulated (FM) signals. The other claims about SSB are wrong. SWR stands for standing wave ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "mcfwpw11dsp3s"
    },
    {
      "id": "ot-ht-l12-t8a05",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following signal types has the narrowest bandwidth?"
      },
      "options": [
        {
          "modality": "text",
          "value": "FM voice"
        },
        {
          "modality": "text",
          "value": "SSB voice"
        },
        {
          "modality": "text",
          "value": "CW"
        },
        {
          "modality": "text",
          "value": "Slow-scan TV"
        }
      ],
      "correctIndex": 2,
      "explanation": "Continuous wave (CW) has the narrowest bandwidth; frequency modulated (FM) voice, single sideband (SSB) voice and slow-scan TV are all wider.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "8bhzm9f3ayzl"
    },
    {
      "id": "ot-ht-l12-t8a08",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the approximate bandwidth of a typical single sideband (SSB) voice signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "1 kHz"
        },
        {
          "modality": "text",
          "value": "3 kHz"
        },
        {
          "modality": "text",
          "value": "6 kHz"
        },
        {
          "modality": "text",
          "value": "15 kHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "A typical SSB voice signal is about 3 kHz wide.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1o80tr535x6md"
    },
    {
      "id": "ot-ht-l12-t8a11",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the approximate bandwidth required to transmit a CW signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "2.4 kHz"
        },
        {
          "modality": "text",
          "value": "150 Hz"
        },
        {
          "modality": "text",
          "value": "1000 Hz"
        },
        {
          "modality": "text",
          "value": "15 kHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "A continuous wave (CW) signal needs about 150 Hz, the narrowest of the signal types.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "htoc6m1miuf8e"
    },
    {
      "id": "ot-ht-l12-t8a09",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the approximate bandwidth of an FM voice signal on VHF repeaters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Less than 500 Hz"
        },
        {
          "modality": "text",
          "value": "About 150 kHz"
        },
        {
          "modality": "text",
          "value": "Between 10 and 15 kHz"
        },
        {
          "modality": "text",
          "value": "Between 50 and 125 kHz"
        }
      ],
      "correctIndex": 2,
      "explanation": "Frequency modulated (FM) voice on very high frequency (VHF) repeaters is between 10 and 15 kHz wide.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lz1f9tx7z7mp"
    },
    {
      "id": "ot-ht-l12-t8a10",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the approximate bandwidth of AM fast-scan TV transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "More than 10 MHz"
        },
        {
          "modality": "text",
          "value": "About 6 MHz"
        },
        {
          "modality": "text",
          "value": "About 3 MHz"
        },
        {
          "modality": "text",
          "value": "About 1 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "Amplitude modulated (AM) fast-scan TV is about 6 MHz wide.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1em7pt41bt8aky"
    },
    {
      "id": "ot-ht-l12-t8a12",
      "shape": "mcq",
      "tags": [
        "modulation"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a disadvantage of FM compared with single sideband?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voice quality is poorer"
        },
        {
          "modality": "text",
          "value": "Only one signal can be received at a time"
        },
        {
          "modality": "text",
          "value": "FM signals are harder to tune"
        },
        {
          "modality": "text",
          "value": "FM signals are more susceptible to high SWR"
        }
      ],
      "correctIndex": 1,
      "explanation": "With frequency modulated (FM) operation, only one signal can be received at a time. Voice quality, tuning and standing wave ratio (SWR) are not the drawbacks.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "117n90a1uklzqy"
    },
    {
      "id": "ot-ht-l12-t8b01",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What telemetry information is typically transmitted by satellite beacons?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The signal strength of received signals"
        },
        {
          "modality": "text",
          "value": "Time of day accurate to plus or minus 1/10 second"
        },
        {
          "modality": "text",
          "value": "Health and status of the satellite"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Beacons typically send the health and status of the satellite as telemetry.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1gqb3yr4ymkih"
    },
    {
      "id": "ot-ht-l12-t8b05",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a satellite beacon?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The primary transmit antenna on the satellite"
        },
        {
          "modality": "text",
          "value": "An indicator light that shows where to point your antenna"
        },
        {
          "modality": "text",
          "value": "A reflective surface on the satellite"
        },
        {
          "modality": "text",
          "value": "A transmission from a satellite that contains status information"
        }
      ],
      "correctIndex": 3,
      "explanation": "A beacon is a satellite transmission containing status information, not an antenna, light or reflector.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "f1ntuv9qj2oh"
    },
    {
      "id": "ot-ht-l12-t8b03",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following are provided by satellite tracking programs?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Maps showing the real-time position of the satellite track over Earth"
        },
        {
          "modality": "text",
          "value": "The time, azimuth, and elevation of the start, maximum altitude, and end of a pass"
        },
        {
          "modality": "text",
          "value": "The apparent frequency of the satellite transmission, including effects of Doppler shift"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Tracking programs provide maps of the track, pass times with azimuth and elevation, and apparent frequency with Doppler shift. All are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "3r44zp15oul49"
    },
    {
      "id": "ot-ht-l12-t8b06",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following are inputs to a satellite tracking program?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The satellite transmitted power"
        },
        {
          "modality": "text",
          "value": "The Keplerian elements"
        },
        {
          "modality": "text",
          "value": "The last observed time of zero Doppler shift"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "Tracking programs take the Keplerian elements as input; transmitted power and zero-Doppler time are not inputs.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "m6jq1p1qsjgw3"
    },
    {
      "id": "ot-ht-l12-t8b02",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the impact of using excessive effective radiated power on a satellite uplink?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Possibility of commanding the satellite to an improper mode"
        },
        {
          "modality": "text",
          "value": "Blocking access by other users"
        },
        {
          "modality": "text",
          "value": "Overloading the satellite batteries"
        },
        {
          "modality": "text",
          "value": "Possibility of rebooting the satellite control computer"
        }
      ],
      "correctIndex": 1,
      "explanation": "Excessive effective radiated power (ERP) on an uplink blocks access by other users.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1vmzao91ep45ob"
    },
    {
      "id": "ot-ht-l12-t8b12",
      "shape": "mcq",
      "tags": [
        "power"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a way to determine whether your satellite uplink power into a linear transponder satellite is neither too low nor too high?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Check your signal strength report in the telemetry data"
        },
        {
          "modality": "text",
          "value": "Listen for distortion on your downlink signal"
        },
        {
          "modality": "text",
          "value": "Your signal strength on the downlink should be about the same as the beacon"
        },
        {
          "modality": "text",
          "value": "Compare your signal to others on the downlink using an internet SDR receiver"
        }
      ],
      "correctIndex": 2,
      "explanation": "Uplink power is about right when the downlink signal strength is about the same as the beacon. SDR stands for software defined radio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1xr9whg1xlf92m"
    },
    {
      "id": "ot-ht-l12-t8b04",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What mode of transmission is commonly used by amateur radio satellites?"
      },
      "options": [
        {
          "modality": "text",
          "value": "SSB"
        },
        {
          "modality": "text",
          "value": "FM"
        },
        {
          "modality": "text",
          "value": "CW/data"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Satellites commonly use single sideband (SSB), frequency modulated (FM) and continuous wave (CW) or data, so all three choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1m2c9h81chvm8y"
    },
    {
      "id": "ot-ht-l12-t8b08",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does it mean if a satellite is operating in U/V mode?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The satellite uplink is in the 15-meter band and the downlink is in the 10-meter band"
        },
        {
          "modality": "text",
          "value": "The satellite uplink is in the 70-centimeter band and the downlink is in the 2-meter band"
        },
        {
          "modality": "text",
          "value": "The satellite operates using ultraviolet frequencies"
        },
        {
          "modality": "text",
          "value": "The satellite frequencies are usually variable"
        }
      ],
      "correctIndex": 1,
      "explanation": "U/V mode means uplink in the 70-centimeter band and downlink in the 2-meter band.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "k2jzkr8z6f9h"
    },
    {
      "id": "ot-ht-l12-t8b10",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the term LEO mean in reference to communication satellites?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Low Energy Orbit, which conserves battery power"
        },
        {
          "modality": "text",
          "value": "Low Elevation Orbit, which appears close to the horizon from the earth station"
        },
        {
          "modality": "text",
          "value": "Low Equilibrium Orbit, which has a slightly unstable period"
        },
        {
          "modality": "text",
          "value": "Low Earth Orbit, which has a period of around 100 minutes"
        }
      ],
      "correctIndex": 3,
      "explanation": "LEO means Low Earth Orbit, with a period of around 100 minutes.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "151hf1r8l0pid"
    },
    {
      "id": "ot-ht-l12-t8b07",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is Doppler shift in reference to satellite communications?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A change in the satellite orbit"
        },
        {
          "modality": "text",
          "value": "A mode where the satellite receives signals on one band and transmits on another"
        },
        {
          "modality": "text",
          "value": "An observed change in signal frequency from relative motion of satellite and Earth station"
        },
        {
          "modality": "text",
          "value": "A special digital communications mode for some satellites"
        }
      ],
      "correctIndex": 2,
      "explanation": "Doppler shift is an observed frequency change caused by relative motion between satellite and Earth station.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "voc9imq7tbu"
    },
    {
      "id": "ot-ht-l12-t8b09",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "What causes spin fading of satellite signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Circular polarized noise interference radiated from the sun"
        },
        {
          "modality": "text",
          "value": "Rotation of the satellite and its antennas"
        },
        {
          "modality": "text",
          "value": "Doppler shift of the received signal"
        },
        {
          "modality": "text",
          "value": "Interfering signals within the satellite uplink band"
        }
      ],
      "correctIndex": 1,
      "explanation": "Spin fading is caused by rotation of the satellite and its antennas.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1m6qj94j7w2hi"
    },
    {
      "id": "ot-ht-l12-t8b11",
      "shape": "mcq",
      "tags": [
        "satellites"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who is permitted to receive telemetry from an amateur radio satellite?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Anyone"
        },
        {
          "modality": "text",
          "value": "Only the satellite control operator"
        },
        {
          "modality": "text",
          "value": "Only control operator or a licensed amateur given the encryption key by that operator"
        },
        {
          "modality": "text",
          "value": "Only a licensed radio amateur who has received the encryption key from AMSAT"
        }
      ],
      "correctIndex": 0,
      "explanation": "Anyone may receive amateur satellite telemetry; no control operator role or encryption key is needed. AMSAT stands for Radio Amateur Satellite Corporation.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1chibuu11n4lr8"
    },
    {
      "id": "ht-l13-f-direction-finding",
      "shape": "fact",
      "tags": [
        "operating",
        "interference"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Radio Direction Finding",
      "body": "**Radio direction finding** is the method used to locate sources of noise interference or jamming.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A landscape seen from above. At the lower left, a generic operator figure, a plain silhouette, holds a directional antenna drawn as a simple Yagi-style boom with several elements. An arrow runs from the antenna toward a distant marked signal source at the upper right, drawn as a small transmitter emitting wavy lines and labeled as the interference or jamming source. A dashed bearing line runs from the antenna to the source.",
        "imageSearchTerm": "Finding a hidden signal source",
        "alt": "Finding a hidden signal source: radio direction finding: a directional antenna is pointed to find which way an interference or jamming signal is coming from.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-direction-finding.e273f454.webp"
      },
      "uid": "cb6mc1eoobk3"
    },
    {
      "id": "ht-l13-f-hunt-antenna",
      "shape": "fact",
      "tags": [
        "operating",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "imagePrompt": "An operator outdoors holds a handheld directional antenna with a small radio, searching a field.",
        "imageSearchTerm": "handheld directional antenna fox hunt",
        "alt": "Operator holding a handheld directional antenna outdoors",
        "kind": "photo",
        "credit": "Wikimedia Commons · Lz1adf · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:80sets.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-hunt-antenna.7bbec2f1.webp"
      },
      "title": "Gear for a Transmitter Hunt",
      "body": "In a hidden transmitter hunt, operators search for a transmitter that has been concealed. The useful item for the hunt is a **directional antenna**.",
      "uid": "3p716l646i0f"
    },
    {
      "id": "ht-l13-f-hunt-antenna-hero",
      "shape": "fact",
      "title": "Hunting a Transmitter",
      "body": "In a hidden transmitter hunt, operators search for a transmitter that has been concealed. For the search, the useful item is a directional antenna.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "operating",
        "antennas"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "An operator outdoors holds a handheld directional antenna with a small radio, searching a field.",
        "imageSearchTerm": "handheld directional antenna fox hunt",
        "alt": "Operator holding a handheld directional antenna outdoors",
        "kind": "photo",
        "credit": "Wikimedia Commons · Lz1adf · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:80sets.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-hunt-antenna.7bbec2f1.webp"
      },
      "uid": "xah1p2t6w5mq"
    },
    {
      "id": "ht-l13-f-contesting",
      "shape": "fact",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Contesting Is",
      "body": "**Contesting** is the operating activity of contacting as many stations as possible during a specified period.",
      "uid": "1ewm2zc1skxuns"
    },
    {
      "id": "ht-l13-f-contest-practice",
      "shape": "fact",
      "tags": [
        "operating",
        "identification"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Good Contest Practice",
      "body": "Good practice in a contest contact is to send only the minimum information needed for proper identification and the **contest exchange**.",
      "uid": "jjn0k514vm4w9"
    },
    {
      "id": "ht-l13-f-grid-locator",
      "shape": "fact",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Grid Locator Meaning",
      "body": "A **grid locator** is a letter-number designator assigned to a geographic location.",
      "uid": "kcmpsx1qw9kf"
    },
    {
      "id": "ht-l13-f-irlp-access",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Reaching IRLP Nodes",
      "body": "Over-the-air access to Internet Radio Linking Project (IRLP) nodes is accomplished by using **Dual-Tone Multi-Frequency (DTMF)** signals.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Left to right. At the far left, a generic handheld radio sends a signal by radio to Repeater A, a plain tower with an antenna. Draw that radio path as wavy lines, with a small callout of keypad tones labeled as DTMF signals. Repeater A connects by a solid line to a central cloud labeled internet. The cloud connects by a solid line to Repeater B on the right. Repeater B sends wavy radio lines to a second generic handheld radio at the far right. Arrows on the links point both ways to show the linked systems carry traffic in both directions.",
        "imageSearchTerm": "Two repeaters linked through the internet",
        "alt": "Two repeaters linked through the internet: the Internet Radio Linking Project (IRLP) joins two systems, and an operator reaches a node by radio with dual-tone multi-frequency (DTMF) tones.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-irlp-access.e6e65cd6.webp"
      },
      "uid": "eurnz6m3iapy"
    },
    {
      "id": "ht-l13-f-voip",
      "shape": "fact",
      "tags": [
        "operating",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Voice Over the Internet",
      "body": "**Voice Over Internet Protocol (VoIP)** is a method of delivering voice communications over the internet using digital techniques.",
      "uid": "jetxy61ywcqqw"
    },
    {
      "id": "ht-l13-f-irlp",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What IRLP Does",
      "body": "The **Internet Radio Linking Project (IRLP)** is a technique to connect amateur radio systems, such as repeaters, via the internet.",
      "uid": "y06hsckj9mvm"
    },
    {
      "id": "ht-l13-f-echolink",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "EchoLink Without a Radio",
      "body": "**EchoLink** is the protocol that enables an amateur station to transmit through a repeater without using a radio to initiate the transmission.",
      "uid": "uhg0f0tvy682"
    },
    {
      "id": "ht-l13-f-echolink-register",
      "shape": "fact",
      "tags": [
        "licensing",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Starting With EchoLink",
      "body": "Before using **EchoLink**, a person must register a call sign and provide proof of license.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Left to right. At the left, a generic desktop computer with a microphone and no radio anywhere near it. A solid line runs from the computer to a central cloud labeled internet, then to a repeater tower on the right. From the repeater, wavy radio lines go out to a generic handheld radio at the far right. An arrow shows the signal flowing from the computer, through the internet, to the repeater, and out over the air. Put a small note beside the computer saying the call sign is registered and proof of license is provided first.",
        "imageSearchTerm": "EchoLink: reaching a repeater without a radio",
        "alt": "EchoLink: reaching a repeater without a radio. With EchoLink a licensed station can transmit through a repeater from a computer, with no radio starting the transmission.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-echolink-register.ae9d371d.webp"
      },
      "uid": "13jkv4j6mkmw9"
    },
    {
      "id": "ht-l13-f-gateway",
      "shape": "fact",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Gateway Stations",
      "body": "An amateur radio station that connects other amateur stations to the internet is a **gateway**.",
      "uid": "1mrv4lm18wa1sw"
    },
    {
      "id": "ht-l13-q-irlp-handheld",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee on a handheld radio wants to reach an Internet Radio Linking Project (IRLP) node over the air. What is used?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A password spoken to the node",
          "short": "Voice-sent password"
        },
        {
          "modality": "text",
          "value": "An internet password sent by radio",
          "short": "Internet password"
        },
        {
          "modality": "text",
          "value": "Dual-Tone Multi-Frequency (DTMF) signals",
          "short": "DTMF signals"
        },
        {
          "modality": "text",
          "value": "Continuous Tone-Coded Squelch System (CTCSS) tones",
          "short": "CTCSS tone codes"
        }
      ],
      "correctIndex": 2,
      "explanation": "Over-the-air node access uses Dual-Tone Multi-Frequency (DTMF) signals. A spoken password, an internet password and Continuous Tone-Coded Squelch System (CTCSS) tones are not how nodes are accessed.",
      "uid": "hs5nzidldaro"
    },
    {
      "id": "ht-l13-q-echolink-start",
      "shape": "mcq",
      "tags": [
        "licensing",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new Technician licensee wants to start using EchoLink. What is needed first?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Complete an EchoLink training course",
          "short": "EchoLink training course"
        },
        {
          "modality": "text",
          "value": "Register call sign and show license",
          "short": "Register call sign and license"
        },
        {
          "modality": "text",
          "value": "Pay for an EchoLink software license",
          "short": "Pay for EchoLink license"
        },
        {
          "modality": "text",
          "value": "Upgrade to at least General Class",
          "short": "Upgrade to General Class"
        }
      ],
      "correctIndex": 1,
      "explanation": "EchoLink needs a registered call sign and proof of license. It requires no training, no purchased software license and no General Class license, so a Technician licensee can register.",
      "uid": "1eiwui01ddwffa"
    },
    {
      "id": "ht-l13-q-gateway",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A club station links other amateurs to the internet. What is that kind of station called?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A repeater"
        },
        {
          "modality": "text",
          "value": "A beacon"
        },
        {
          "modality": "text",
          "value": "A digipeater"
        },
        {
          "modality": "text",
          "value": "A gateway"
        }
      ],
      "correctIndex": 3,
      "explanation": "A station that connects other amateur stations to the internet is a gateway. A repeater, a beacon and a digipeater are different kinds of station.",
      "uid": "ubg49qiax1kg"
    },
    {
      "id": "ht-l13-q-contest-scene",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Operators try to log as many different stations as they can during a set weekend. Which activity is this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A net operation"
        },
        {
          "modality": "text",
          "value": "A transmitter hunt"
        },
        {
          "modality": "text",
          "value": "A radio contest"
        },
        {
          "modality": "text",
          "value": "An emergency drill"
        }
      ],
      "correctIndex": 2,
      "explanation": "Contesting means contacting as many stations as possible in a specified period. Nets, hidden transmitter hunts and simulated emergency exercises are different activities.",
      "uid": "m2dexj1mco90r"
    },
    {
      "id": "ht-l13-tf-grid-locator",
      "shape": "trueFalse",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A grid locator is a letter-number designator assigned to a geographic location.",
      "isTrue": true,
      "why": "That is what a grid locator is. It is not tied to an azimuth and elevation, and it is not an instrument.",
      "uid": "ukrnk16p75tu"
    },
    {
      "id": "ht-l13-tf-contest-twice",
      "shape": "trueFalse",
      "tags": [
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Good contest practice is to send as much extra information as possible beyond identification and the contest exchange.",
      "isTrue": false,
      "why": "Good practice is to send only the minimum information needed for proper identification and the contest exchange.",
      "uid": "1g0agfm110j7ls"
    },
    {
      "id": "ht-l13-c-direction-finding",
      "shape": "cloze",
      "tags": [
        "interference",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "The method used to locate noise interference or jamming is radio ___ finding.",
      "answer": "direction",
      "distractors": [
        "Doppler",
        "phase",
        "echo"
      ],
      "explanation": "Radio direction finding locates noise and jamming sources. Doppler radar, phase locking and echolocation are not methods for this job.",
      "uid": "1ccbl721fq9tp6"
    },
    {
      "id": "ht-l13-p-gateway",
      "shape": "pair",
      "tags": [
        "repeaters",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Gateway"
      },
      "sideB": {
        "modality": "text",
        "value": "Links amateur stations to the internet"
      },
      "uid": "19p5neg1d1jvfq"
    },
    {
      "id": "ht-l13-f-digital-modes",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Digital Communications Modes",
      "body": "Packet radio, IEEE 802.11 and FT8 all count as **digital communications modes**. IEEE stands for Institute of Electrical and Electronics Engineers.",
      "uid": "ocadmgj9xpxy"
    },
    {
      "id": "ht-l13-f-ft8",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "FT8 Weak-Signal Mode",
      "body": "**FT8** is a digital mode capable of low signal-to-noise operation, so it can work with weak signals.",
      "illustration": {
        "imagePrompt": "A waterfall display of many narrow FT8 signals on the 40 meter band, with a wider JT65 signal at right.",
        "imageSearchTerm": "WSJT-X FT8",
        "alt": "A waterfall display of many narrow FT8 signals on the 40-meter band, with a wider JT65 signal at right.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Chrumps · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:FT8+JT65.png",
        "subject": "A waterfall display of many narrow FT8 signals on the 40 meter band, with a wider JT65 signal at right.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-ft8.a7ca5960.webp"
      },
      "uid": "szsenu1sf8ph8"
    },
    {
      "id": "ht-l13-f-ft8-hero",
      "shape": "fact",
      "title": "A Mode for Weak Signals",
      "body": "FT8 is a digital mode capable of low signal-to-noise operation. Because of this, it can work with weak signals.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "digital-modes"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A waterfall display of many narrow FT8 signals on the 40 meter band, with a wider JT65 signal at right.",
        "imageSearchTerm": "WSJT-X FT8",
        "alt": "A waterfall display of many narrow FT8 signals on the 40-meter band, with a wider JT65 signal at right.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Chrumps · CC0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:FT8+JT65.png",
        "subject": "A waterfall display of many narrow FT8 signals on the 40 meter band, with a wider JT65 signal at right.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-ft8.a7ca5960.webp"
      },
      "uid": "1sl396j1ud149j"
    },
    {
      "id": "ht-l13-f-aprs-data",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Data Sent by APRS",
      "body": "The **Automatic Packet Reporting System (APRS)** can transmit three kinds of data. They are Global Positioning System (GPS) position data, text messages and weather data.",
      "uid": "145gy8gdt8ahy"
    },
    {
      "id": "ht-l13-f-ntsc",
      "shape": "fact",
      "tags": [
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What NTSC Means",
      "body": "**National Television System Committee (NTSC)** is the full name. As a term, it means an analog fast-scan color TV signal.",
      "uid": "3fvc90l5l6qi"
    },
    {
      "id": "ht-l13-f-aprs-use",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "APRS Maps and Messages",
      "body": "An application of the **Automatic Packet Reporting System (APRS)** is real-time tactical digital communications in conjunction with a map showing the locations of stations.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple generic map with a few roads and no real place names. Four or five station markers are placed on it. One marker has a speech-bubble text message, one has a small weather icon (a thermometer and a cloud), and one has a position pin with a satellite symbol for Global Positioning System (GPS). A legend panel on the right lists the three data types.",
        "imageSearchTerm": "APRS stations on a map",
        "alt": "Stations on a map: the Automatic Packet Reporting System (APRS) as real-time tactical communications tied to a map of station locations, and the three kinds of data it carries.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-aprs-use.f74a7a2f.webp"
      },
      "uid": "16ee7c617d3pou"
    },
    {
      "id": "ht-l13-f-psk",
      "shape": "fact",
      "tags": [
        "modulation",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "PSK Spelled Out",
      "body": "**Phase Shift Keying** is what the abbreviation PSK means.",
      "uid": "111f1607fzw16"
    },
    {
      "id": "ht-l13-f-dmr",
      "shape": "fact",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What DMR Does",
      "body": "**Digital Mobile Radio (DMR)** is a technique for time-multiplexing two digital voice signals on a single 12.5 kilohertz (kHz) repeater channel.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal time axis running left to right. Above it, one long band represents the single repeater channel, with its width marked as 12.5 kHz. Along the band, blocks alternate in two tones: voice 1, voice 2, voice 1, voice 2, and so on, with no overlap. At the left, two separate input arrows labeled voice signal 1 and voice signal 2 merge into the one channel. The point is that both voices take turns in time on the same channel.",
        "imageSearchTerm": "Two voices sharing one repeater channel",
        "alt": "Two voices sharing one repeater channel: Digital Mobile Radio (DMR) time-multiplexes two digital voice signals on a single 12.5 kilohertz (kHz) channel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-dmr.1a527442.webp"
      },
      "uid": "8ulx2j1ukavax"
    },
    {
      "id": "ht-l13-f-packet-contents",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A packet radio transmission leaves a sending station with a header and a checksum. The receiving station checks the packet. If it detects an error, it sends a request for retransmission back to the sender. Arrows show the order of these steps, with no other steps added.",
        "imageSearchTerm": "How automatic repeat request (ARQ) handles an error",
        "alt": "How automatic repeat request (ARQ) handles an error: the order of events when a receiving station finds an error in a packet and asks for the packet to be sent again.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-packet-contents.83d69e14.webp"
      },
      "title": "Inside Packet Transmissions",
      "body": "**Packet radio** transmissions include a checksum that permits error detection. They include a header containing the call sign of the station receiving the information. They also include automatic repeat request (ARQ) in case of error.",
      "uid": "3tld8jsiid6n"
    },
    {
      "id": "ht-l13-f-cw",
      "shape": "fact",
      "tags": [
        "emissions",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What CW Means",
      "body": "**CW**, short for continuous wave, is another name for a Morse code transmission.",
      "uid": "17dvhla1bofzcm"
    },
    {
      "id": "ht-l13-f-wsjtx",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: A chart with one row for each term: the term on the left and its plain meaning from the guide on the right. The terms are FT8, Phase Shift Keying (PSK), International Morse code telegraphy (CW), National Television System Committee (NTSC), Automatic Packet Reporting System (APRS), Digital Mobile Radio (DMR) and the Weak Signal communication by K1JT (WSJT) suite WSJT-X. Each row sits on its own line with equal spacing.",
        "imageSearchTerm": "Digital and non-voice mode names side by side",
        "alt": "A chart of digital and non-voice mode names, one row for each term with its plain meaning beside it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-wsjtx.6618f4ff.webp"
      },
      "title": "What WSJT-X Supports",
      "body": "**WSJT-X** is a software suite for weak-signal work; the name begins with Weak Signal communication by K1JT (WSJT). Its digital mode software supports Earth-Moon-Earth (EME), weak signal propagation beacons and meteor scatter.",
      "uid": "d32adj1pfimkn"
    },
    {
      "id": "ht-l13-f-arq",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "How ARQ Fixes Errors",
      "body": "**Automatic repeat request (ARQ)** is an error correction method in which the receiving station detects errors and sends a request for retransmission.",
      "uid": "1csatro11p1uag"
    },
    {
      "id": "ht-l13-f-mesh",
      "shape": "fact",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Amateur Radio Mesh Networks",
      "body": "An amateur radio **mesh network** is an amateur-radio data network using commercial Wi-Fi equipment with modified firmware.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Five identical Wi-Fi units, each a small box with two short antennas on a short mast, spread across the picture at different heights like the corners of a loose pentagon. Dashed radio links join each unit to two or three of its neighbors, so the links form a web rather than a single chain. One unit is enlarged in a circular inset with its cover cut away to show a circuit chip, and the chip carries the firmware tag. A bracket under the units carries the equipment label, and a caption at the bottom names the network.",
        "imageSearchTerm": "An amateur radio mesh network",
        "alt": "Five commercial Wi-Fi units joined by dashed radio links into a web, one opened in an inset to show its chip, tagged modified firmware: an amateur radio mesh network.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l13-f-mesh.17e4ed66.webp"
      },
      "uid": "l7ca5ig3wj6m"
    },
    {
      "id": "ht-l13-q-arq-scene",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A receiving station detects an error in a packet and asks the sender to transmit it again. What is this method?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Phase Shift Keying (PSK)"
        },
        {
          "modality": "text",
          "value": "Digital Mobile Radio (DMR)"
        },
        {
          "modality": "text",
          "value": "Automatic repeat request (ARQ)"
        },
        {
          "modality": "text",
          "value": "Earth-Moon-Earth (EME)"
        }
      ],
      "correctIndex": 2,
      "explanation": "Automatic repeat request is error correction where the receiver detects an error and requests retransmission. Phase Shift Keying is a keying method and DMR carries voice.",
      "uid": "txcjxo23upq0"
    },
    {
      "id": "ht-l13-q-dmr-channel",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Two digital voice signals share one 12.5 kilohertz (kHz) repeater channel by taking turns in time. Which technique is this?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Phase Shift Keying (PSK)"
        },
        {
          "modality": "text",
          "value": "An amateur mesh network"
        },
        {
          "modality": "text",
          "value": "Earth-Moon-Earth (EME)"
        },
        {
          "modality": "text",
          "value": "Digital Mobile Radio (DMR)"
        }
      ],
      "correctIndex": 3,
      "explanation": "Digital Mobile Radio time-multiplexes two digital voice signals on one 12.5 kHz repeater channel. A mesh network carries data over Wi-Fi equipment, not voice slots.",
      "uid": "1rsm0mrcwd6oh"
    },
    {
      "id": "ht-l13-q-aprs-map",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A group wants real-time tactical digital messages alongside a map of station locations. Which system fits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Voice Over Internet Protocol (VoIP)",
          "short": "VoIP"
        },
        {
          "modality": "text",
          "value": "Automatic Packet Reporting System (APRS)",
          "short": "APRS"
        },
        {
          "modality": "text",
          "value": "Internet Radio Linking Project (IRLP)",
          "short": "IRLP"
        },
        {
          "modality": "text",
          "value": "Digital Mobile Radio (DMR)",
          "short": "DMR"
        }
      ],
      "correctIndex": 1,
      "explanation": "The Automatic Packet Reporting System pairs tactical digital communications with a map of station locations. Voice Over Internet Protocol and linking systems carry voice between stations.",
      "uid": "1fvgo578enie9"
    },
    {
      "id": "ht-l13-q-mesh-scene",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A club builds a data network from commercial Wi-Fi gear running modified firmware. What is it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An amateur radio mesh network"
        },
        {
          "modality": "text",
          "value": "A digital voice repeater mode"
        },
        {
          "modality": "text",
          "value": "A satellite link network"
        },
        {
          "modality": "text",
          "value": "An internet repeater link"
        }
      ],
      "correctIndex": 0,
      "explanation": "An amateur radio mesh network is a data network using commercial Wi-Fi equipment with modified firmware. It is not a voice mode, a satellite network or an internet linking protocol.",
      "uid": "y5gmrp15v53s9"
    },
    {
      "id": "ht-l13-tf-ntsc",
      "shape": "trueFalse",
      "tags": [
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The term National Television System Committee (NTSC) means an analog fast-scan color TV signal.",
      "isTrue": true,
      "why": "NTSC refers to an analog fast-scan color TV signal, not a digital encryption standard or a compression scheme.",
      "uid": "1k3hu1eoclmus"
    },
    {
      "id": "ht-l13-tf-aprs-data",
      "shape": "trueFalse",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The Automatic Packet Reporting System (APRS) can send position data but not text messages or weather data.",
      "isTrue": false,
      "why": "APRS can transmit Global Positioning System (GPS) position data, text messages and weather data.",
      "uid": "4vyby21r9q92o"
    },
    {
      "id": "ht-l13-c-mesh-wifi",
      "shape": "cloze",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "An amateur radio mesh network uses commercial ___ equipment with modified firmware.",
      "answer": "Wi-Fi",
      "distractors": [
        "satellite TV",
        "repeater",
        "cellular"
      ],
      "explanation": "A mesh network is a data network built from commercial Wi-Fi equipment with modified firmware, not satellite TV hardware.",
      "uid": "1iak26dsuuh6p"
    },
    {
      "id": "ht-l13-p-cw",
      "shape": "pair",
      "tags": [
        "emissions"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "CW"
      },
      "sideB": {
        "modality": "text",
        "value": "Another name for a Morse code transmission"
      },
      "uid": "1kp14yl61ajil"
    },
    {
      "id": "ht-l13-tf-voip",
      "shape": "trueFalse",
      "tags": [
        "operating",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Voice Over Internet Protocol (VoIP) is a method of delivering voice communications over the internet using digital techniques.",
      "isTrue": true,
      "why": "VoIP delivers voice over the internet using digital techniques. It is not a set of identification rules or a way to spot distant stations.",
      "uid": "1qloi3e11750i"
    },
    {
      "id": "ht-l13-tf-ft8-mode",
      "shape": "trueFalse",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "FT8 is a wideband frequency modulated (FM) voice mode.",
      "isTrue": false,
      "why": "FT8 is a digital mode capable of low signal-to-noise operation, so it can work with weak signals. It is not a wideband FM voice mode.",
      "uid": "1onclf6wkjdj0"
    },
    {
      "id": "ht-l13-tf-psk",
      "shape": "trueFalse",
      "tags": [
        "modulation",
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The abbreviation PSK stands for Pulse Shift Keying.",
      "isTrue": false,
      "why": "PSK stands for Phase Shift Keying, not Pulse Shift Keying.",
      "uid": "14l3t7k1h69b4c"
    },
    {
      "id": "ht-l13-tf-wsjtx",
      "shape": "trueFalse",
      "tags": [
        "digital-modes"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "The Weak Signal communication by K1JT (WSJT) suite, WSJT-X, supports meteor scatter but not Earth-Moon-Earth (EME).",
      "isTrue": false,
      "why": "Its digital mode software supports Earth-Moon-Earth (EME), weak signal propagation beacons and meteor scatter.",
      "uid": "12tq9bk17jmluw"
    },
    {
      "id": "ot-ht-l13-t8c01",
      "shape": "mcq",
      "tags": [
        "interference",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following methods is used to locate sources of noise interference or jamming?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Echolocation"
        },
        {
          "modality": "text",
          "value": "Doppler radar"
        },
        {
          "modality": "text",
          "value": "Radio direction finding"
        },
        {
          "modality": "text",
          "value": "Phase locking"
        }
      ],
      "correctIndex": 2,
      "explanation": "Radio direction finding is the method used to locate sources of noise interference or jamming. Echolocation, Doppler radar and phase locking are not methods for this job.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1eppng51640xch"
    },
    {
      "id": "ot-ht-l13-t8c02",
      "shape": "mcq",
      "tags": [
        "operating",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of these items would be useful for a hidden transmitter hunt?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Calibrated SWR meter"
        },
        {
          "modality": "text",
          "value": "A directional antenna"
        },
        {
          "modality": "text",
          "value": "A directional wattmeter"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "A hidden transmitter hunt calls for a directional antenna. A calibrated standing wave ratio (SWR) meter and a directional wattmeter are not the right tools, so \"all of these\" is wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "rbh34bqk3y01"
    },
    {
      "id": "ot-ht-l13-t8c03",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What operating activity involves contacting as many stations as possible during a specified period?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Simulated emergency exercises"
        },
        {
          "modality": "text",
          "value": "Net operations"
        },
        {
          "modality": "text",
          "value": "Hidden transmitter hunts"
        },
        {
          "modality": "text",
          "value": "Contesting"
        }
      ],
      "correctIndex": 3,
      "explanation": "Contesting is contacting as many stations as possible during a specified period. Emergency exercises, nets and transmitter hunts are different activities.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "cgqn2e1jurox4"
    },
    {
      "id": "ot-ht-l13-t8c04",
      "shape": "mcq",
      "tags": [
        "operating",
        "identification"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is good practice when contacting another station in a contest?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Signing only the last two letters of your call if there are many other stations calling"
        },
        {
          "modality": "text",
          "value": "Contacting the station twice to be sure that you are in his log"
        },
        {
          "modality": "text",
          "value": "Sending only the minimum information for proper identification and the contest exchange"
        },
        {
          "modality": "text",
          "value": "Adding “Please copy” before your exchange"
        }
      ],
      "correctIndex": 2,
      "explanation": "Good contest practice is sending only the minimum information needed for identification and the exchange. Partial call signs, repeat contacts and \"Please copy\" are poor practice.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lst99g1jngij0"
    },
    {
      "id": "ot-ht-l13-t8c05",
      "shape": "mcq",
      "tags": [
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a grid locator?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A letter-number designator assigned to a geographic location"
        },
        {
          "modality": "text",
          "value": "A letter-number designator assigned to an azimuth and elevation"
        },
        {
          "modality": "text",
          "value": "An instrument for locating faults in power amplifiers"
        },
        {
          "modality": "text",
          "value": "An instrument for radio direction finding"
        }
      ],
      "correctIndex": 0,
      "explanation": "A grid locator is a letter-number designator for a geographic location. It is not tied to an azimuth and elevation, and it is not an instrument.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1mbjrhj1p3bl0h"
    },
    {
      "id": "ot-ht-l13-t8c06",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is over the air access to Internet Radio Linking Project (IRLP) nodes accomplished?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By obtaining a password that is sent via voice to the node"
        },
        {
          "modality": "text",
          "value": "By using Dual-Tone Multi-Frequency (DTMF) signals"
        },
        {
          "modality": "text",
          "value": "By entering the proper internet password"
        },
        {
          "modality": "text",
          "value": "By using Continuous Tone-Coded Squelch System (CTCSS) tone codes"
        }
      ],
      "correctIndex": 1,
      "explanation": "IRLP nodes are reached over the air with DTMF signals, not a voice-sent password, an internet password or CTCSS tone codes.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1utxkc51p3dj27"
    },
    {
      "id": "ot-ht-l13-t8c08",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the Internet Radio Linking Project (IRLP)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A technique to connect amateur radio systems, such as repeaters, via the internet"
        },
        {
          "modality": "text",
          "value": "A system for providing access to websites via amateur radio"
        },
        {
          "modality": "text",
          "value": "A system for informing amateurs in real time of the frequency of active DX stations"
        },
        {
          "modality": "text",
          "value": "A technique for measuring signal strength of an amateur transmitter via the internet"
        }
      ],
      "correctIndex": 0,
      "explanation": "IRLP connects amateur radio systems, such as repeaters, via the internet. It does not give website access, report DX (long distance) stations or measure signal strength.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "x0unq3tduh33"
    },
    {
      "id": "ot-ht-l13-t8c07",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is Voice Over Internet Protocol (VoIP)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Rules for identifying your station when linked over the internet to another station"
        },
        {
          "modality": "text",
          "value": "A technique employed to “spot” DX stations via the internet"
        },
        {
          "modality": "text",
          "value": "Measuring transmitter modulation quality using remote sites monitored via the internet"
        },
        {
          "modality": "text",
          "value": "A method of delivering voice communications over the internet using digital techniques"
        }
      ],
      "correctIndex": 3,
      "explanation": "VoIP delivers voice communications over the internet using digital techniques. It is not station identification rules, DX (long distance) spotting or modulation measurement.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1n639k9188d3tb"
    },
    {
      "id": "ot-ht-l13-t8c09",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following protocols enables an amateur station to transmit through a repeater without using a radio to initiate the transmission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "IRLP"
        },
        {
          "modality": "text",
          "value": "D-STAR"
        },
        {
          "modality": "text",
          "value": "DMR"
        },
        {
          "modality": "text",
          "value": "EchoLink"
        }
      ],
      "correctIndex": 3,
      "explanation": "EchoLink lets a station transmit through a repeater without using a radio to start the transmission. Internet Radio Linking Project (IRLP), Digital Smart Technologies for Amateur Radio (D-STAR) and Digital Mobile Radio (DMR) are not the answer.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1z0i8mt1m3v1j9"
    },
    {
      "id": "ot-ht-l13-t8c10",
      "shape": "mcq",
      "tags": [
        "licensing",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is required before using the EchoLink system?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Complete the required EchoLink training"
        },
        {
          "modality": "text",
          "value": "Purchase a license to use the EchoLink software"
        },
        {
          "modality": "text",
          "value": "Register your call sign and provide proof of license"
        },
        {
          "modality": "text",
          "value": "At least a General Class license"
        }
      ],
      "correctIndex": 2,
      "explanation": "EchoLink requires registering a call sign and providing proof of license. Training, a purchased software license and a General Class license are not required.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19nn977rj5lj1"
    },
    {
      "id": "ot-ht-l13-t8c11",
      "shape": "mcq",
      "tags": [
        "repeaters",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an amateur radio station that connects other amateur stations to the internet?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A gateway"
        },
        {
          "modality": "text",
          "value": "A repeater"
        },
        {
          "modality": "text",
          "value": "A digipeater"
        },
        {
          "modality": "text",
          "value": "A beacon"
        }
      ],
      "correctIndex": 0,
      "explanation": "A gateway is a station that connects other amateur stations to the internet. It is not the same thing as a repeater, digipeater or beacon.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "12qbru9bl0czp"
    },
    {
      "id": "ot-ht-l13-t8d01",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a digital communications mode?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Packet radio"
        },
        {
          "modality": "text",
          "value": "IEEE 802.11"
        },
        {
          "modality": "text",
          "value": "FT8"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Packet radio, Institute of Electrical and Electronics Engineers (IEEE) 802.11 and FT8 are all digital communications modes, so all three choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1aimclm1sgtzoi"
    },
    {
      "id": "ot-ht-l13-t8d02",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is FT8?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A wideband FM voice mode"
        },
        {
          "modality": "text",
          "value": "A digital mode capable of low signal-to-noise operation"
        },
        {
          "modality": "text",
          "value": "An eight-channel multiplex mode for FM repeaters"
        },
        {
          "modality": "text",
          "value": "A digital slow-scan TV mode with forward error correction and automatic color compensation"
        }
      ],
      "correctIndex": 1,
      "explanation": "FT8 is a digital mode capable of low signal-to-noise operation, meaning it works with weak signals. It is not a voice, repeater multiplex or slow-scan TV mode. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "tncdbd1a4a049"
    },
    {
      "id": "ot-ht-l13-t8d10",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following operating activities is supported by digital mode software in the WSJT-X software suite?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Earth-Moon-Earth"
        },
        {
          "modality": "text",
          "value": "Weak signal propagation beacons"
        },
        {
          "modality": "text",
          "value": "Meteor scatter"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "WSJT-X, whose name begins with Weak Signal communication by K1JT (WSJT), supports Earth-Moon-Earth, weak signal propagation beacons and meteor scatter, so each choice is correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "uvsjnfhbz8of"
    },
    {
      "id": "ot-ht-l13-t8d06",
      "shape": "mcq",
      "tags": [
        "modulation",
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What does the abbreviation \"PSK\" mean?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Pulse Shift Keying"
        },
        {
          "modality": "text",
          "value": "Phase Shift Keying"
        },
        {
          "modality": "text",
          "value": "Packet Sampled Keying"
        },
        {
          "modality": "text",
          "value": "Power Sampled Keying"
        }
      ],
      "correctIndex": 1,
      "explanation": "PSK stands for Phase Shift Keying. Pulse Shift, Packet Sampled and Power Sampled Keying are wrong.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "hg1y3m1ag734e"
    },
    {
      "id": "ot-ht-l13-t8d09",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is CW?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A type of electromagnetic propagation"
        },
        {
          "modality": "text",
          "value": "A digital mode used primarily on 2-meter FM"
        },
        {
          "modality": "text",
          "value": "Error correction for digital transmission using code words"
        },
        {
          "modality": "text",
          "value": "Another name for a Morse code transmission"
        }
      ],
      "correctIndex": 3,
      "explanation": "Continuous wave (CW) is another name for a Morse code transmission. It is not propagation, a 2-meter frequency modulated (FM) digital mode or code-word error correction.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "136hu521hmud9m"
    },
    {
      "id": "ot-ht-l13-t8d04",
      "shape": "mcq",
      "tags": [
        "emissions"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is meant by the term \"NTSC?\""
      },
      "options": [
        {
          "modality": "text",
          "value": "A digital transmission standard for encrypting data"
        },
        {
          "modality": "text",
          "value": "A special mode for satellite uplink"
        },
        {
          "modality": "text",
          "value": "An analog fast-scan color TV signal"
        },
        {
          "modality": "text",
          "value": "A frame compression scheme for TV signals"
        }
      ],
      "correctIndex": 2,
      "explanation": "NTSC means an analog fast-scan color TV signal. It is not an encryption standard, a satellite uplink mode or a frame compression scheme.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19o6srnum40wb"
    },
    {
      "id": "ot-ht-l13-t8d03",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What kind of data can be transmitted by APRS?"
      },
      "options": [
        {
          "modality": "text",
          "value": "GPS position data"
        },
        {
          "modality": "text",
          "value": "Text messages"
        },
        {
          "modality": "text",
          "value": "Weather data"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Automatic Packet Reporting System (APRS) can send GPS position data, text messages and weather data, so all three choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "16qqtzi1kny2bw"
    },
    {
      "id": "ot-ht-l13-t8d05",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an application of APRS?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Providing real-time tactical digital communications with a map showing station locations"
        },
        {
          "modality": "text",
          "value": "Automatically showing the number of PACTOR packets sent during a specific time interval"
        },
        {
          "modality": "text",
          "value": "Providing voice over internet connection between repeaters"
        },
        {
          "modality": "text",
          "value": "Providing information on the number of stations signed into a repeater"
        }
      ],
      "correctIndex": 0,
      "explanation": "Automatic Packet Reporting System (APRS) provides real-time tactical digital communications with a map showing station locations. It does not link repeaters by voice or count stations. PACTOR means a digital mode combining packet and Amateur Teleprinting Over Radio (AMTOR).",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "jor3aq1ct84y0"
    },
    {
      "id": "ot-ht-l13-t8d08",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is included in packet radio transmissions?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A checksum that permits error detection"
        },
        {
          "modality": "text",
          "value": "A header that contains the call sign of the station to which the information is being sent"
        },
        {
          "modality": "text",
          "value": "Automatic repeat request in case of error"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Packet radio transmissions include a checksum for error detection, a header with the destination call sign and automatic repeat request, so all three are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "co738u18zmr9k"
    },
    {
      "id": "ot-ht-l13-t8d11",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the role of ARQ in a transmission system?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A special transmission format limited to video signals"
        },
        {
          "modality": "text",
          "value": "A system used to encrypt command signals to an amateur radio satellite"
        },
        {
          "modality": "text",
          "value": "An error correction method where the receiver detects errors and requests retransmission"
        },
        {
          "modality": "text",
          "value": "A method of compressing data using autonomous reiterative Q codes prior to final encoding"
        }
      ],
      "correctIndex": 2,
      "explanation": "Automatic repeat request (ARQ) is error correction in which the receiver detects errors and requests retransmission. It is not a video format, satellite encryption or compression.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "tu4988qmcokm"
    },
    {
      "id": "ot-ht-l13-t8d07",
      "shape": "mcq",
      "tags": [
        "digital-modes",
        "repeaters"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following describes DMR?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel"
        },
        {
          "modality": "text",
          "value": "An automatic position tracking mode for FM mobiles communicating through repeaters"
        },
        {
          "modality": "text",
          "value": "Automatic computer logging for hands-off logging while operating a vehicle"
        },
        {
          "modality": "text",
          "value": "Transmitting on two repeater inputs simultaneously for automatic error correction"
        }
      ],
      "correctIndex": 0,
      "explanation": "Digital Mobile Radio (DMR) time-multiplexes two digital voice signals on a single 12.5 kHz repeater channel. It is not position tracking, logging or dual-input error correction. FM stands for frequency modulated.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bwoba3mg6cev"
    },
    {
      "id": "ot-ht-l13-t8d12",
      "shape": "mcq",
      "tags": [
        "digital-modes"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following best describes an amateur radio mesh network?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An amateur-radio data network using commercial Wi-Fi equipment with modified firmware"
        },
        {
          "modality": "text",
          "value": "A wide-bandwidth digital voice mode employing DMR protocols"
        },
        {
          "modality": "text",
          "value": "An amateur-radio satellite network using modified commercial satellite TV hardware"
        },
        {
          "modality": "text",
          "value": "An internet linking protocol allowing communication through repeaters around the world"
        }
      ],
      "correctIndex": 0,
      "explanation": "A mesh network is a data network using commercial Wi-Fi equipment with modified firmware. It is not a Digital Mobile Radio (DMR) voice mode, a satellite network or a linking protocol.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "5r3wpm1v9fqoc"
    },
    {
      "id": "ht-l14-f-beam",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a beam antenna does",
      "body": "A **beam antenna** concentrates signals in one direction. It favors one direction over the others.",
      "illustration": {
        "imagePrompt": "A Yagi-style antenna with a rotator on a mast above trees against a blue sky.",
        "imageSearchTerm": "Yagi antenna",
        "alt": "A Yagi-style antenna with a rotator on a mast above trees against a blue sky.",
        "kind": "photo",
        "credit": "Wikimedia Commons · UnifiedFunctionality · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Yagi_aerial_antenna_above_trees.jpg",
        "subject": "A Yagi-style antenna with a rotator on a mast above trees against a blue sky.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-beam.a3963aa9.webp"
      },
      "uid": "vrxweagbddae"
    },
    {
      "id": "ht-l14-f-gain",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Antenna gain defined",
      "body": "**Antenna gain** is the increase in signal strength in a specified direction compared to a reference antenna. It describes how much stronger the signal is in a chosen direction.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A top-down view of two radiation patterns that share one center point. The reference antenna's pattern is a plain dashed outline. Drawn over it is a beam antenna's pattern: one long main lobe stretching far out in one direction, and small or no lobes elsewhere. A single arrow points along the main lobe as the specified direction. A bracket on that arrow spans from the edge of the reference outline to the tip of the beam lobe and marks the increase in signal strength. Leave the axes unscaled.",
        "imageSearchTerm": "Gain compared to a reference antenna",
        "alt": "Gain compared to a reference antenna. Gain is the extra signal strength in one chosen direction, measured against a reference antenna.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-gain.5986a598.webp"
      },
      "uid": "elsq3i156a9p0"
    },
    {
      "id": "ht-l14-f-yagi",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The Yagi has the most gain",
      "body": "Among a 5/8 wave vertical, an isotropic antenna, a J pole and a **Yagi**, the Yagi offers the greatest gain. It is the pick for the most signal toward a distant station.",
      "illustration": {
        "imagePrompt": "A Yagi beam antenna with several parallel elements mounted on a mast against a clear sky.",
        "imageSearchTerm": "Yagi beam antenna on mast",
        "alt": "Yagi beam antenna on a mast",
        "kind": "photo",
        "credit": "Wikimedia Commons · Adityamadhav83 · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:A_television_antenna_in_Kakinada.JPG",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-yagi.40ac5616.webp"
      },
      "uid": "1x1xlnd8gyrff"
    },
    {
      "id": "ht-l14-f-yagi-hero",
      "shape": "fact",
      "title": "Yagi antennas lead in gain",
      "body": "Compared with a 5/8 wave vertical, an isotropic antenna and a J pole, a Yagi has the greatest gain. That makes it the choice for putting the most signal toward a distant station.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "antennas"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A Yagi beam antenna with several parallel elements mounted on a mast against a clear sky.",
        "imageSearchTerm": "Yagi beam antenna on mast",
        "alt": "Yagi beam antenna on a mast",
        "kind": "photo",
        "credit": "Wikimedia Commons · Adityamadhav83 · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:A_television_antenna_in_Kakinada.JPG",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-yagi.40ac5616.webp"
      },
      "uid": "5s9fjtqexfmx"
    },
    {
      "id": "ht-l14-f-polarization",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "How polarization is described",
      "body": "The **polarization** of an antenna is described by the orientation of its electric field.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A radio wave drawn in 3D perspective, travelling left to right along a straight axis. One sine wave lies in a single plane and is marked as the electric field. A second sine wave lies in the plane at right angles to the first and is marked as the magnetic field. An arrow along the axis marks the direction of travel. A callout points to the plane of the electric field and states that this orientation describes polarization.",
        "imageSearchTerm": "Polarization follows the electric field",
        "alt": "Polarization follows the electric field. Polarization is described by the orientation of the electric field, not by the magnetic field or the direction of travel.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-polarization.fe2f729f.webp"
      },
      "uid": "qy2gacoi8lao"
    },
    {
      "id": "ht-l14-f-loading",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Antenna loading explained",
      "body": "**Antenna loading** is a way of electrically lengthening an antenna by inserting inductors in its radiating elements. The antenna then behaves as though it were longer than its physical size.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: On the left, a short vertical antenna element standing on a base. Partway up the element, an inductor is drawn in its standard schematic form, a row of connected loops, in series with the element. A bracket beside it marks its physical length. On the right, a taller dashed outline of a plain element with no coil, the same height as the antenna's electrical length. A bracket on the dashed element marks it as the length the loaded antenna behaves like.",
        "imageSearchTerm": "Loading with an inductor",
        "alt": "Loading with an inductor. An inductor inserted in the radiating element makes a short antenna act as though it were longer.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-loading.153d9220.webp"
      },
      "uid": "1te6kcl1pi4161"
    },
    {
      "id": "ht-l14-f-dipole-length",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Shorter dipole, higher frequency",
      "body": "Shortening a dipole antenna increases its **resonant frequency**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two horizontal dipoles drawn one above the other, centred on the same feed point: the upper one at its first length, the lower one visibly shorter. An upward arrow beside the lower one marks the higher resonant frequency.",
        "imageSearchTerm": "Length and resonant frequency",
        "alt": "Length and resonant frequency: shortening a dipole increases its resonant frequency.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-dipole-length.decdb515.webp"
      },
      "uid": "1yum5dapbxpjs"
    },
    {
      "id": "ht-l14-f-quarter-wave",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The 19-inch 2-meter vertical",
      "body": "A 19-inch-long vertical antenna is often used on 2 meters because it is a resonant **quarter-wave**.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal sine wave that spans exactly one full wavelength, marked as one wavelength on 2 meters. Tick marks divide the wavelength into four equal quarters, and the first quarter is shaded. Beside the wave stands a vertical antenna element whose height equals that shaded quarter, joined to it by a dashed guide line. The element is labeled 19 inches.",
        "imageSearchTerm": "The 19-inch quarter-wave on 2 meters",
        "alt": "The 19-inch quarter-wave on 2 meters. A 19-inch vertical is one quarter of a wavelength on 2 meters, which is why it is resonant.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-quarter-wave.d8689006.webp"
      },
      "uid": "o3jcu417tn3c0"
    },
    {
      "id": "ht-l14-f-handheld",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "The handheld's short antenna",
      "body": "A handheld transceiver's short flexible antenna has **low efficiency** compared with a full-sized quarter-wave antenna.",
      "illustration": {
        "imagePrompt": "A handheld amateur radio transceiver with a short flexible antenna held in a hand against a plain background.",
        "imageSearchTerm": "handheld ham radio rubber duck antenna",
        "alt": "Handheld radio with a short flexible antenna",
        "kind": "photo",
        "credit": "Wikimedia Commons · Jakez · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:ICOM_IC-T3H.JPG",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-handheld.6344e88a.webp"
      },
      "uid": "79bnbc18u9it2"
    },
    {
      "id": "ht-l14-f-handheld-hero",
      "shape": "fact",
      "title": "Shorter, less efficient",
      "body": "The short flexible antenna on a handheld transceiver has low efficiency compared with a full-sized quarter-wave antenna.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "antennas"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A handheld amateur radio transceiver with a short flexible antenna held in a hand against a plain background.",
        "imageSearchTerm": "handheld ham radio rubber duck antenna",
        "alt": "Handheld radio with a short flexible antenna",
        "kind": "photo",
        "credit": "Wikimedia Commons · Jakez · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:ICOM_IC-T3H.JPG",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-handheld.6344e88a.webp"
      },
      "uid": "7gd6tb74cllx"
    },
    {
      "id": "ht-l14-f-vehicle",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Handheld inside a vehicle",
      "body": "Using a handheld very high frequency (VHF) transceiver inside a vehicle with no externally mounted antenna has a drawback. Signal strength is reduced by the **shielding effect** of the vehicle.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple side-view outline of a generic car. Inside the cabin, a small generic handheld radio with a short antenna sends out curved wave lines. The waves are strong inside the cabin. Where they meet the car body, most are drawn stopping or fading. Outside the car only a few thin, faint wave lines continue. No antenna is mounted on the outside of the car.",
        "imageSearchTerm": "A handheld inside a vehicle",
        "alt": "A handheld inside a vehicle. The vehicle's body blocks part of a handheld's signal when there is no outside antenna.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-vehicle.724d3637.webp"
      },
      "uid": "yzp045ra6kbl"
    },
    {
      "id": "ht-l14-f-five-eighths",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why a 5/8-wavelength whip",
      "body": "For very high frequency (VHF) or ultra high frequency (UHF) mobile service, a **5/8-wavelength whip** has more gain than a 1/4-wave antenna.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two vertical whips standing on one horizontal base line, like a vehicle roof. On the left is a short 1/4-wave whip. On the right is a 5/8-wavelength whip, drawn 2.5 times as tall as the 1/4-wave whip. A small upward marker beside the taller whip notes that it has more gain. A caption bar at the foot names the service.",
        "imageSearchTerm": "5/8-wavelength and 1/4-wave whips",
        "alt": "5/8-wavelength and 1/4-wave whips: the two mobile whips side by side, with the 5/8-wavelength whip having more gain.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-five-eighths.58edf422.webp"
      },
      "uid": "epqkulizr2wv"
    },
    {
      "id": "ht-l14-f-dipole-pattern",
      "shape": "fact",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Where a dipole radiates most",
      "body": "A half-wave **dipole** radiates its strongest signal broadside to the antenna.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal dipole with its feed point at the centre. Arrows leave the sides of the antenna, broadside to it, and are marked as the strongest. Shorter arrows leave off the ends and are marked as less signal.",
        "imageSearchTerm": "Where a dipole radiates strongest",
        "alt": "Where a dipole radiates strongest: the strongest signal leaves a half-wave dipole broadside to the antenna, and a station off the ends gets less.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-dipole-pattern.9586f385.webp"
      },
      "uid": "8w2lbo1b79ppg"
    },
    {
      "id": "ht-l14-q-vehicle",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee transmits from a car using a handheld radio with no outside antenna. What is the likely result?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The vehicle's shielding weakens the signal",
          "short": "Vehicle shielding weakens it"
        },
        {
          "modality": "text",
          "value": "The radio overheats from reflected power",
          "short": "Radio overheats"
        },
        {
          "modality": "text",
          "value": "The antenna bandwidth drops sharply",
          "short": "Bandwidth drops"
        },
        {
          "modality": "text",
          "value": "The signal strength rises inside metal",
          "short": "Signal rises inside metal"
        }
      ],
      "correctIndex": 0,
      "explanation": "The vehicle shields the radio, so signal strength falls. The radio does not overheat from reflected power, and the shielding does not raise the signal.",
      "uid": "6h7lj78cawab"
    },
    {
      "id": "ht-l14-q-raise-frequency",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A builder wants a dipole to resonate on a higher frequency. Which change does that?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Lengthening the radiating wires",
          "short": "Lengthen the wires"
        },
        {
          "modality": "text",
          "value": "Shortening the radiating wires",
          "short": "Shorten the wires"
        },
        {
          "modality": "text",
          "value": "Adding coils in series with the wires",
          "short": "Add series coils"
        },
        {
          "modality": "text",
          "value": "Adding capacitive loading at the ends",
          "short": "Add end capacitive loading"
        }
      ],
      "correctIndex": 1,
      "explanation": "A shorter dipole resonates higher. Lengthening, series coils and end loading do not raise the resonant frequency.",
      "uid": "qq1w6t1l99fdb"
    },
    {
      "id": "ht-l14-q-whip-advantage",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A mobile operator swaps a 1/4-wave whip for a 5/8-wavelength whip on a very high frequency (VHF) radio. What advantage results?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Lower standing wave ratio"
        },
        {
          "modality": "text",
          "value": "Lower impedance at the feed",
          "short": "Lower impedance"
        },
        {
          "modality": "text",
          "value": "More gain in its pattern",
          "short": "More gain"
        },
        {
          "modality": "text",
          "value": "A higher radiation angle",
          "short": "Higher radiation angle"
        }
      ],
      "correctIndex": 2,
      "explanation": "The 5/8-wavelength whip has more gain. It does not offer lower standing wave ratio, lower impedance or a higher radiation angle.",
      "uid": "4onqmh1rr0a2h"
    },
    {
      "id": "ht-l14-q-lengthening",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which action is a form of antenna loading?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Placing a resistor in the radiating portion",
          "short": "Resistor in radiator"
        },
        {
          "modality": "text",
          "value": "Fitting a spring in the base of a mobile whip",
          "short": "Spring in whip base"
        },
        {
          "modality": "text",
          "value": "Strengthening beam elements against wind",
          "short": "Stronger beam elements"
        },
        {
          "modality": "text",
          "value": "Placing inductors in the radiating elements",
          "short": "Inductors in radiator"
        }
      ],
      "correctIndex": 3,
      "explanation": "Loading electrically lengthens an antenna with inductors in its radiating elements. A resistor, a spring or stronger elements do not do that.",
      "uid": "f5y1ie137rt5q"
    },
    {
      "id": "ht-l14-tf-pattern",
      "shape": "trueFalse",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A half-wave dipole radiates its strongest signal off the ends of the antenna.",
      "isTrue": false,
      "why": "The strongest signal is broadside to the antenna, not off the ends.",
      "uid": "1vppkmz1ag7jzf"
    },
    {
      "id": "ht-l14-tf-quarter-wave",
      "shape": "trueFalse",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A 19-inch vertical antenna is often used on 2 meters because it is a resonant quarter-wave.",
      "isTrue": true,
      "why": "At 19 inches it is a resonant quarter-wave on 2 meters, not a half-wave and not chosen for high gain.",
      "uid": "1bing5x17az8r3"
    },
    {
      "id": "ht-l14-c-efficiency",
      "shape": "cloze",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A handheld's short flexible antenna has low ___ compared with a full-sized quarter-wave antenna.",
      "answer": "efficiency",
      "distractors": [
        "impedance",
        "loss",
        "wavelength"
      ],
      "explanation": "A disadvantage of a handheld's short flexible antenna, compared with a full-sized quarter-wave antenna, is low efficiency. A larger share of its power is lost rather than radiated, so its loss is not low.",
      "uid": "b2crd71v9k8m3"
    },
    {
      "id": "ht-l14-p-gain",
      "shape": "pair",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Antenna gain"
      },
      "sideB": {
        "modality": "text",
        "value": "Signal increase vs a reference antenna"
      },
      "uid": "1gcxxw4f6ldo"
    },
    {
      "id": "ht-l14-f-taped",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Taping connectors outdoors",
      "body": "PL259, Bayonet Neill-Concelman (BNC) and Type N connectors should all be carefully taped for **weather protection** when used outdoors.",
      "illustration": {
        "kind": "chart",
        "imagePrompt": "FlashFeed original chart: Three columns, one per connector: PL-259, Bayonet Neill-Concelman (BNC) and Type N, each with a simple connector outline under its name. The PL-259 and Type N columns each have one line of text from the guide; the BNC column has its name only. A bar across the foot of all three columns says the connectors should be taped for weather protection outdoors.",
        "imageSearchTerm": "Coax connectors and their uses",
        "alt": "Coax connectors and their uses: the PL-259, common at high frequency (HF) and very high frequency (VHF); the Bayonet Neill-Concelman (BNC); and the Type N, suited above 400 megahertz (MHz).",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-taped.456f757b.webp"
      },
      "uid": "16w6l2g1tyfkam"
    },
    {
      "id": "ht-l14-f-coax-impedance",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Common coax impedance",
      "body": "The most common impedance of **coaxial cable** (coax) used in amateur radio is 50 ohms.",
      "illustration": {
        "imagePrompt": "A coil of black coaxial cable with a connector on its end, lying on a workbench.",
        "imageSearchTerm": "coaxial cable coil connector",
        "alt": "Coil of coaxial cable with a connector",
        "kind": "photo",
        "credit": "Wikimedia Commons · Wtshymanski · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Coaxial_cable_braided_wire.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-coax-impedance.4b9ab760.webp"
      },
      "uid": "nxqtm410wmvy4"
    },
    {
      "id": "ht-l14-f-coax-popular",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why coax is so common",
      "body": "Coax is the most common **feed line** for amateur antenna systems because it is easy to use and needs few special installation considerations.",
      "uid": "1ibte769qhco"
    },
    {
      "id": "ht-l14-f-swr",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What standing wave ratio means",
      "body": "**Standing wave ratio (SWR)** is a measure of how well a load is matched to a transmission line.",
      "uid": "11sqbq14kg8mm"
    },
    {
      "id": "ht-l14-f-tuner",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What an antenna tuner does",
      "body": "An **antenna tuner**, or antenna coupler, matches the antenna system impedance to the transceiver's output impedance.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right block diagram. A box for the transceiver connects by a short cable to a box for the antenna tuner. A feed line then runs from the tuner to a simple antenna symbol. One bracket spans the antenna system (feed line plus antenna), and another marks the transceiver's output. Two-headed arrows meet at the tuner to show it matching the two impedances.",
        "imageSearchTerm": "Where the antenna tuner sits",
        "alt": "Where the antenna tuner sits. The antenna tuner sits between the transceiver and the antenna system and matches their impedances.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-tuner.6d887d14.webp"
      },
      "uid": "1grlz7a1pn88n8"
    },
    {
      "id": "ht-l14-f-loss-frequency",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Coax loss rises with frequency",
      "body": "As the frequency of a signal in coaxial cable increases, the **loss** increases.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple line chart with no numeric scale. The horizontal axis is frequency, increasing to the right. The vertical axis is loss in coaxial cable, increasing upward. A single line climbs steadily from lower left to upper right. Arrows on both axes show the direction of increase.",
        "imageSearchTerm": "Coax loss rises with frequency",
        "alt": "Coax loss rises with frequency: the trend that loss in coaxial cable grows as frequency goes up.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-loss-frequency.5d8a21b6.webp"
      },
      "uid": "4jxt7u12qqr5q"
    },
    {
      "id": "ht-l14-f-type-n",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Type N above 400 megahertz",
      "body": "For frequencies above 400 megahertz (MHz), the **Type N** is the most suitable radio frequency (RF) connector.",
      "illustration": {
        "imagePrompt": "A close view of a Type N coaxial connector on the end of a cable, on a plain surface.",
        "imageSearchTerm": "Type N coaxial connector close-up",
        "alt": "Type N coaxial connector",
        "kind": "photo",
        "credit": "Wikimedia Commons · Swift.Hg · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Male_type_N_connector.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-type-n.bcefb8c3.webp"
      },
      "uid": "kvjhbwnh393o"
    },
    {
      "id": "ht-l14-f-type-n-hero",
      "shape": "fact",
      "title": "Best above 400 megahertz",
      "body": "When operating above 400 megahertz (MHz), choose the Type N. It is the most suitable radio frequency (RF) connector for those frequencies.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "feed-lines"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A close view of a Type N coaxial connector on the end of a cable, on a plain surface.",
        "imageSearchTerm": "Type N coaxial connector close-up",
        "alt": "Type N coaxial connector",
        "kind": "photo",
        "credit": "Wikimedia Commons · Swift.Hg · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Male_type_N_connector.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-type-n.bcefb8c3.webp"
      },
      "uid": "a7uvc4mlo9ow"
    },
    {
      "id": "ht-l14-f-pl259",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Where the PL-259 is used",
      "body": "The **PL-259** is commonly used at high frequency (HF) and very high frequency (VHF) frequencies. Because it is not watertight, it needs tape outdoors.",
      "illustration": {
        "imagePrompt": "A PL-259 connector on the end of a coaxial cable, seen from the front.",
        "imageSearchTerm": "PL-259 connector",
        "alt": "A PL-259 connector on the end of a coaxial cable, seen from the front.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Appaloosa · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:UHF_PL_Connector.jpg",
        "subject": "A PL-259 (UHF) male connector on the end of a coaxial cable, seen from the front.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-pl259.aea90fde.webp"
      },
      "uid": "1dzmr0pjpkxof"
    },
    {
      "id": "ht-l14-f-loss-sources",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Sources of loss in coax",
      "body": "Three things add **loss** to a coaxial feed line: water intrusion into coaxial connectors, high standing wave ratio (SWR), and multiple connectors in the line.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A left-to-right station drawing. A generic radio box sits indoors, and a coaxial feed line runs out through a wall to an antenna on a mast. Along the indoor run, the line passes through several joined connectors in a row. The outdoor connector near the antenna has rain drops falling on it, with water entering it. A callout on the line near the antenna marks a mismatch causing high standing wave ratio. A callout leads from each spot to a note that each one adds loss.",
        "imageSearchTerm": "Three sources of loss in coax",
        "alt": "Three sources of loss in coax: the three places in a coax run where loss is added.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-loss-sources.69b70d01.webp"
      },
      "uid": "vgzpwh11j402t"
    },
    {
      "id": "ht-l14-f-erratic-swr",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What makes SWR erratic",
      "body": "A **loose connection** in the antenna or feed line can cause erratic changes in standing wave ratio (SWR).",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Left to right: a transceiver, a standing wave ratio meter with an analog needle, and a coaxial feed line running right and up to an antenna on a short mast. Where the feed line meets the antenna, the connector is drawn slightly pulled apart, with a small gap and short wiggle marks, ringed in coral. The meter's needle is drawn three times, one solid and two faint ghost needles at other angles, with small motion arcs, so the reading visibly jumps around. The meter's scale has no numbers.",
        "imageSearchTerm": "Erratic SWR from a loose connection",
        "alt": "A radio, a standing wave ratio (SWR) meter whose needle jumps around, and a feed line to an antenna whose connector is loose, circled in red.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-erratic-swr.4ee8227f.webp"
      },
      "uid": "1z07lbi2cwhvq"
    },
    {
      "id": "ht-l14-f-rg213",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "RG-213 versus RG-58",
      "body": "**RG-213** cable has less loss at a given frequency than RG-58.",
      "illustration": {
        "imagePrompt": "A cutaway end of RG-213 coaxial cable showing the inner conductor, insulator, braided shield and jacket.",
        "imageSearchTerm": "RG-213 coaxial cable",
        "alt": "A cutaway end of RG-213 coaxial cable showing the inner conductor, insulator, braided shield and jacket.",
        "kind": "photo",
        "credit": "Wikimedia Commons · User Appaloosa on de.wikipedia · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Rg213_1.jpg",
        "subject": "A cutaway end of RG-213 coaxial cable showing the inner conductor, insulator, braided shield and jacket.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l14-f-rg213.373a2fb9.webp"
      },
      "uid": "rwlqsh1s9pu2p"
    },
    {
      "id": "ht-l14-f-hardline",
      "shape": "fact",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Hardline has the lowest loss",
      "body": "Among 50-ohm flexible coax, multi-conductor unbalanced cable, 75-ohm flexible coax and **air-insulated hardline**, the hardline has the lowest loss.",
      "uid": "da24x5iy8k5x"
    },
    {
      "id": "ht-l14-q-type-n",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "For a link above 400 megahertz (MHz), which listed radio frequency (RF) connector suits best?"
      },
      "options": [
        {
          "modality": "text",
          "value": "PL-259"
        },
        {
          "modality": "text",
          "value": "DB-25"
        },
        {
          "modality": "text",
          "value": "RS-213"
        },
        {
          "modality": "text",
          "value": "Type N"
        }
      ],
      "correctIndex": 3,
      "explanation": "Type N is the most suitable of these above 400 megahertz. The PL-259 is for high frequency and very high frequency use, and the others are not suited.",
      "uid": "spax3a18wcyqc"
    },
    {
      "id": "ht-l14-q-tuner",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "What job does an antenna tuner do for a transceiver?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Helps the receiver tune in weak stations",
          "short": "Tunes in weak stations"
        },
        {
          "modality": "text",
          "value": "Matches antenna impedance to the radio output",
          "short": "Matches impedance"
        },
        {
          "modality": "text",
          "value": "Lets an antenna serve transmit and receive",
          "short": "Enables transmit and receive"
        },
        {
          "modality": "text",
          "value": "Selects the proper antenna for the band",
          "short": "Selects antenna for band"
        }
      ],
      "correctIndex": 1,
      "explanation": "A tuner matches the antenna system impedance to the transceiver's output impedance. It does not tune in weak stations or choose an antenna.",
      "uid": "1m2gni21wx8ne4"
    },
    {
      "id": "ht-l14-q-rg-compare",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which statement about RG-58 and RG-213 coax is true?"
      },
      "options": [
        {
          "modality": "text",
          "value": "RG-58 has two layers of shielding",
          "short": "RG-58 has two shields"
        },
        {
          "modality": "text",
          "value": "RG-58 can handle higher power levels",
          "short": "RG-58 handles more power"
        },
        {
          "modality": "text",
          "value": "RG-213 loses less at a given frequency",
          "short": "RG-213 loses less"
        },
        {
          "modality": "text",
          "value": "Both differ in no significant way",
          "short": "No significant difference"
        }
      ],
      "correctIndex": 2,
      "explanation": "RG-213 has less loss at a given frequency. RG-58 does not have two shields or handle higher power, and the two do differ.",
      "uid": "o55mlb14esdkl"
    },
    {
      "id": "ht-l14-q-erratic",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A station's standing wave ratio (SWR) readings keep jumping around. What is a likely cause?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A loose antenna or feed line connection",
          "short": "Loose connection"
        },
        {
          "modality": "text",
          "value": "Overload from a strong local station",
          "short": "Strong local station"
        },
        {
          "modality": "text",
          "value": "Over-modulation of the transmitter",
          "short": "Over-modulation"
        },
        {
          "modality": "text",
          "value": "A local thunderstorm passing overhead",
          "short": "Local thunderstorm"
        }
      ],
      "correctIndex": 0,
      "explanation": "A loose connection in the antenna or feed line can make SWR change erratically. A storm, over-modulation or an overloading station does not.",
      "uid": "wltvm233z46u"
    },
    {
      "id": "ht-l14-tf-water",
      "shape": "trueFalse",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Water getting into coaxial connectors is one source of loss in a coaxial feed line.",
      "isTrue": true,
      "why": "Water intrusion into connectors is one of three listed sources of loss, with high standing wave ratio and multiple connectors.",
      "uid": "659tgw13legr2"
    },
    {
      "id": "ht-l14-tf-pl259-watertight",
      "shape": "trueFalse",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A PL-259 connector is watertight, so it needs no tape outdoors.",
      "isTrue": false,
      "why": "The PL-259 is not watertight, which is why it needs its tape outdoors.",
      "uid": "9jocpzvma3lf"
    },
    {
      "id": "ht-l14-c-impedance",
      "shape": "cloze",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "The most common impedance of amateur coax is ___ ohms.",
      "answer": "50",
      "distractors": [
        "8",
        "12",
        "600"
      ],
      "explanation": "Coax used in amateur radio is most commonly 50 ohms.",
      "uid": "1cvuimt1cf9v4t"
    },
    {
      "id": "ht-l14-p-type-n",
      "shape": "pair",
      "tags": [
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Type N connector"
      },
      "sideB": {
        "modality": "text",
        "value": "Suits frequencies above 400 megahertz"
      },
      "uid": "1oek2b1sdz83x"
    },
    {
      "id": "ht-l14-q-most-gain",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A new licensee wants the most gain toward a distant station. Which antenna offers it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A J pole antenna"
        },
        {
          "modality": "text",
          "value": "A Yagi antenna"
        },
        {
          "modality": "text",
          "value": "A 5/8 wave vertical"
        },
        {
          "modality": "text",
          "value": "An isotropic antenna"
        }
      ],
      "correctIndex": 1,
      "explanation": "Of these four, the Yagi offers the greatest gain. The J pole, 5/8 wave vertical and isotropic antenna offer less.",
      "uid": "17olmre1taq9bk"
    },
    {
      "id": "ht-l14-tf-polarization",
      "shape": "trueFalse",
      "tags": [
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "An antenna's polarization is described by the orientation of its magnetic field.",
      "isTrue": false,
      "why": "Polarization is described by the orientation of the electric field, not the magnetic field.",
      "uid": "z4ucw91ggj2fr"
    },
    {
      "id": "ot-ht-l14-t9a01",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a beam antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "An antenna built from square aluminum beams"
        },
        {
          "modality": "text",
          "value": "An omnidirectional antenna invented by Clarence Beam"
        },
        {
          "modality": "text",
          "value": "An antenna that concentrates signals in one direction"
        },
        {
          "modality": "text",
          "value": "An antenna that focuses the signal into two intense rays"
        }
      ],
      "correctIndex": 2,
      "explanation": "A beam antenna concentrates signals in one direction. It is not omnidirectional and does not make two intense rays.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "e0pfr2sk5y6q"
    },
    {
      "id": "ot-ht-l14-t9a06",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following types of antennas offers the greatest gain?"
      },
      "options": [
        {
          "modality": "text",
          "value": "5/8 wave vertical"
        },
        {
          "modality": "text",
          "value": "Isotropic"
        },
        {
          "modality": "text",
          "value": "J pole"
        },
        {
          "modality": "text",
          "value": "Yagi"
        }
      ],
      "correctIndex": 3,
      "explanation": "Of a 5/8 wave vertical, isotropic, J pole and Yagi, the Yagi offers the greatest gain.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1838wsj7j7nbd"
    },
    {
      "id": "ot-ht-l14-t9a11",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is antenna gain?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The additional power that is added to the transmitter power"
        },
        {
          "modality": "text",
          "value": "The additional power the antenna needs on a higher frequency"
        },
        {
          "modality": "text",
          "value": "The increase in signal strength in a specified direction compared to a reference antenna"
        },
        {
          "modality": "text",
          "value": "The increase in impedance on receive or transmit compared to a reference antenna"
        }
      ],
      "correctIndex": 2,
      "explanation": "Gain is the increase in signal strength in a specified direction compared to a reference antenna. It adds no transmitter power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1w84pwlk2m5ff"
    },
    {
      "id": "ot-ht-l14-t9a02",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following describes a type of antenna loading?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Electrically lengthening by inserting inductors in radiating elements"
        },
        {
          "modality": "text",
          "value": "Inserting a resistor in the radiating portion of the antenna to make it resonant"
        },
        {
          "modality": "text",
          "value": "Installing a spring in the base of a mobile vertical antenna to make it more flexible"
        },
        {
          "modality": "text",
          "value": "Strengthening the radiating elements of a beam antenna to better resist wind damage"
        }
      ],
      "correctIndex": 0,
      "explanation": "Loading electrically lengthens an antenna by inserting inductors in its radiating elements. Resistors, springs and stronger elements are not loading.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1gwddasrdskz2"
    },
    {
      "id": "ot-ht-l14-t9a03",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "How is the polarization of an antenna described?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By the shape of the driven element"
        },
        {
          "modality": "text",
          "value": "By the orientation of the electric field"
        },
        {
          "modality": "text",
          "value": "By the orientation of the magnetic field"
        },
        {
          "modality": "text",
          "value": "By the direction of radiation"
        }
      ],
      "correctIndex": 1,
      "explanation": "Polarization is described by the orientation of the electric field, not the magnetic field or direction of radiation.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1eqlceuobbygi"
    },
    {
      "id": "ot-ht-l14-t9a05",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following increases the resonant frequency of a dipole antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Lengthening it"
        },
        {
          "modality": "text",
          "value": "Inserting coils in series with radiating wires"
        },
        {
          "modality": "text",
          "value": "Shortening it"
        },
        {
          "modality": "text",
          "value": "Adding capacitive loading to the ends of the radiating wires"
        }
      ],
      "correctIndex": 2,
      "explanation": "Shortening a dipole raises its resonant frequency. Lengthening, coils and end capacitive loading do not raise it.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1l4238a4ec2s2"
    },
    {
      "id": "ot-ht-l14-t9a08",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why is a 19-inch-long vertical antenna often used on 2 meters?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It has high gain"
        },
        {
          "modality": "text",
          "value": "It is a resonant half-wave"
        },
        {
          "modality": "text",
          "value": "It is a resonant quarter-wave"
        },
        {
          "modality": "text",
          "value": "It has low RF radiation exposure"
        }
      ],
      "correctIndex": 2,
      "explanation": "A 19-inch vertical is a resonant quarter-wave on 2 meters, not a half-wave or a high-gain antenna. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "13xjdvbbpdqvr"
    },
    {
      "id": "ot-ht-l14-t9a04",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a disadvantage of a handheld radio transceiver’s short flexible antenna compared to a full-sized quarter-wave antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It has low efficiency"
        },
        {
          "modality": "text",
          "value": "It transmits only circularly polarized signals"
        },
        {
          "modality": "text",
          "value": "It is more susceptible to receiver desensitization"
        },
        {
          "modality": "text",
          "value": "It only works on analog signals, not digital ones"
        }
      ],
      "correctIndex": 0,
      "explanation": "A short flexible handheld antenna has low efficiency compared with a full-sized quarter-wave antenna.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "f2ja171utgqlx"
    },
    {
      "id": "ot-ht-l14-t9a07",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a potential drawback of using a handheld VHF transceiver inside a vehicle that lacks an externally mounted antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Signal strength is reduced due to the shielding effect of the vehicle"
        },
        {
          "modality": "text",
          "value": "The bandwidth of the antenna will decrease, increasing SWR"
        },
        {
          "modality": "text",
          "value": "The SWR might decrease, decreasing the signal strength"
        },
        {
          "modality": "text",
          "value": "The handheld will overheat due to reflected power in the vehicle"
        }
      ],
      "correctIndex": 0,
      "explanation": "Inside a vehicle without an outside antenna, signal strength is reduced by the vehicle's shielding effect. VHF stands for very high frequency and SWR stands for standing wave ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1rym3vuj2osmw"
    },
    {
      "id": "ot-ht-l14-t9a09",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is an advantage of a 5/8-wavelength whip antenna for VHF or UHF mobile service compared to a 1/4-wave antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It has more gain"
        },
        {
          "modality": "text",
          "value": "It radiates at a higher angle"
        },
        {
          "modality": "text",
          "value": "It has lower SWR"
        },
        {
          "modality": "text",
          "value": "It has lower impedance"
        }
      ],
      "correctIndex": 0,
      "explanation": "A 5/8-wavelength whip has more gain than a 1/4-wave antenna, not lower standing wave ratio (SWR) or impedance. VHF stands for very high frequency and UHF stands for ultra high frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1t3mcs1105e1ej"
    },
    {
      "id": "ot-ht-l14-t9a10",
      "shape": "mcq",
      "tags": [
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "In which direction does a half-wave dipole antenna radiate the strongest signal?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Equally in all directions"
        },
        {
          "modality": "text",
          "value": "Off the ends of the antenna"
        },
        {
          "modality": "text",
          "value": "In the direction of the feed line"
        },
        {
          "modality": "text",
          "value": "Broadside to the antenna"
        }
      ],
      "correctIndex": 3,
      "explanation": "A half-wave dipole radiates its strongest signal broadside, not off the ends or along the feed line.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "hvcv2l1lxipxh"
    },
    {
      "id": "ot-ht-l14-t9b02",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the most common impedance of coaxial cables used in amateur radio?"
      },
      "options": [
        {
          "modality": "text",
          "value": "8 ohms"
        },
        {
          "modality": "text",
          "value": "50 ohms"
        },
        {
          "modality": "text",
          "value": "600 ohms"
        },
        {
          "modality": "text",
          "value": "12 ohms"
        }
      ],
      "correctIndex": 1,
      "explanation": "The most common impedance of amateur coax is 50 ohms, not 8, 12 or 600.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "xh23pb1uem4u9"
    },
    {
      "id": "ot-ht-l14-t9b03",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why is coaxial cable the most common feed line for amateur radio antenna systems?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It is easy to use and requires few special installation considerations"
        },
        {
          "modality": "text",
          "value": "It has less loss than any other type of feed line"
        },
        {
          "modality": "text",
          "value": "It can handle more power than any other type of feed line"
        },
        {
          "modality": "text",
          "value": "It is less expensive than any other type of feed line"
        }
      ],
      "correctIndex": 0,
      "explanation": "Coax is common because it is easy to use and needs few special installation considerations, not because it beats all others in loss, power or cost.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bn1fv511m3jbj"
    },
    {
      "id": "ot-ht-l14-t9b01",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following connectors should be carefully taped for weather protection when used outdoors?"
      },
      "options": [
        {
          "modality": "text",
          "value": "PL259"
        },
        {
          "modality": "text",
          "value": "BNC"
        },
        {
          "modality": "text",
          "value": "Type N"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "PL259, BNC (usually expanded as Bayonet Neill-Concelman) and Type N connectors should all be carefully taped for weather protection outdoors, so each choice is right.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "6901241maoqn0"
    },
    {
      "id": "ot-ht-l14-t9b06",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following connector types is most suitable as an RF connector for frequencies above 400 MHz?"
      },
      "options": [
        {
          "modality": "text",
          "value": "PL-259"
        },
        {
          "modality": "text",
          "value": "Type N"
        },
        {
          "modality": "text",
          "value": "RS-213"
        },
        {
          "modality": "text",
          "value": "DB-25"
        }
      ],
      "correctIndex": 1,
      "explanation": "Above 400 MHz, the most suitable listed connector is the Type N. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "sgnnj61g1hmjs"
    },
    {
      "id": "ot-ht-l14-t9b07",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is true of PL-259 type coax connectors?"
      },
      "options": [
        {
          "modality": "text",
          "value": "They are preferred for microwave operation"
        },
        {
          "modality": "text",
          "value": "They are watertight"
        },
        {
          "modality": "text",
          "value": "They are commonly used at HF and VHF frequencies"
        },
        {
          "modality": "text",
          "value": "They are a bayonet-type connector"
        }
      ],
      "correctIndex": 2,
      "explanation": "The PL-259 is commonly used at high frequency (HF) and very high frequency (VHF). It is not for microwave, not watertight and not bayonet-type.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "58tvr3myj025"
    },
    {
      "id": "ot-ht-l14-t9b10",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the electrical difference between RG-58 and RG-213 coaxial cable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "There is no significant difference between the two types"
        },
        {
          "modality": "text",
          "value": "RG-58 cable has two shields"
        },
        {
          "modality": "text",
          "value": "RG-213 cable has less loss at a given frequency"
        },
        {
          "modality": "text",
          "value": "RG-58 cable can handle higher power levels"
        }
      ],
      "correctIndex": 2,
      "explanation": "RG-213 has less loss at a given frequency than RG-58. RG-58 has no second shield and does not handle more power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "10eevz9d3wbmh"
    },
    {
      "id": "ot-ht-l14-t9b11",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following types of feed line has the lowest loss?"
      },
      "options": [
        {
          "modality": "text",
          "value": "50-ohm flexible coax"
        },
        {
          "modality": "text",
          "value": "Multi-conductor unbalanced cable"
        },
        {
          "modality": "text",
          "value": "Air-insulated hardline"
        },
        {
          "modality": "text",
          "value": "75-ohm flexible coax"
        }
      ],
      "correctIndex": 2,
      "explanation": "Air-insulated hardline has the lowest loss of the listed feed lines.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "pg7ve07bj3ta"
    },
    {
      "id": "ot-ht-l14-t9b04",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the major function of an antenna tuner (antenna coupler)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It matches the antenna system impedance to the transceiver's output impedance"
        },
        {
          "modality": "text",
          "value": "It helps a receiver automatically tune in weak stations"
        },
        {
          "modality": "text",
          "value": "It allows an antenna to be used on both transmit and receive"
        },
        {
          "modality": "text",
          "value": "It automatically selects the proper antenna for the frequency band being used"
        }
      ],
      "correctIndex": 0,
      "explanation": "An antenna tuner matches the antenna system impedance to the transceiver's output impedance.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "ehzsqw1mxp4ya"
    },
    {
      "id": "ot-ht-l14-t9b12",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is standing wave ratio (SWR)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A measure of how well a load is matched to a transmission line"
        },
        {
          "modality": "text",
          "value": "The ratio of amplifier power output to input"
        },
        {
          "modality": "text",
          "value": "The transmitter efficiency ratio"
        },
        {
          "modality": "text",
          "value": "An indication of the quality of your station’s ground connection"
        }
      ],
      "correctIndex": 0,
      "explanation": "SWR measures how well a load is matched to a transmission line, not power ratio, efficiency or ground quality.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "vt9cb27x4it"
    },
    {
      "id": "ot-ht-l14-t9b05",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What happens as the frequency of a signal in coaxial cable is increased?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The characteristic impedance decreases"
        },
        {
          "modality": "text",
          "value": "The loss decreases"
        },
        {
          "modality": "text",
          "value": "The characteristic impedance increases"
        },
        {
          "modality": "text",
          "value": "The loss increases"
        }
      ],
      "correctIndex": 3,
      "explanation": "Coax loss increases as signal frequency increases.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1pjr02xxhm16j"
    },
    {
      "id": "ot-ht-l14-t9b08",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a source of loss in coaxial feed line?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Water intrusion into coaxial connectors"
        },
        {
          "modality": "text",
          "value": "High SWR"
        },
        {
          "modality": "text",
          "value": "Multiple connectors in the line"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Water in connectors, high standing wave ratio (SWR) and multiple connectors are each sources of loss, so all choices are correct.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "18ays4912qrgvd"
    },
    {
      "id": "ot-ht-l14-t9b09",
      "shape": "mcq",
      "tags": [
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "What can cause erratic changes in SWR?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Local thunderstorm"
        },
        {
          "modality": "text",
          "value": "Loose connection in the antenna or feed line"
        },
        {
          "modality": "text",
          "value": "Over-modulation"
        },
        {
          "modality": "text",
          "value": "Overload from a strong local station"
        }
      ],
      "correctIndex": 1,
      "explanation": "A loose connection in the antenna or feed line can cause erratic standing wave ratio (SWR). Storms, over-modulation and overload do not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "eo2ol1gjokn1"
    },
    {
      "id": "ht-l15-f-battery-short",
      "shape": "fact",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Shorted Battery Terminals",
      "body": "A 12-volt storage battery that lacks internal protection circuitry is a hazard. **Shorting the terminals** can cause burns, fire, or an explosion.",
      "illustration": {
        "imagePrompt": "A 12-volt, 40 amp-hour lead-acid battery with two exposed terminal posts on top.",
        "imageSearchTerm": "lead-acid battery",
        "alt": "A 12-volt, 40 amp-hour lead-acid battery with two exposed terminal posts on top.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Shaddack · Public domain",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Photo-CarBattery.jpg",
        "subject": "A 12-volt, 40 amp-hour lead-acid battery with two exposed terminal posts on top.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-battery-short.4a49f512.webp"
      },
      "uid": "9q8dwd1js675n"
    },
    {
      "id": "ht-l15-f-battery-charging",
      "shape": "fact",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Fast Charging Hazard",
      "body": "Rapidly charging or discharging an unprotected battery carries a hazard of **overheating or out-gassing**. It is a related risk to shorting the terminals.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: In the middle, a storage battery drawn as a box with two terminal posts on top, labeled as unprotected. On the left, a charger box with a thick arrow pouring into the battery, labeled Rapid charging. On the right, a load box with a thick arrow pouring out of the battery, labeled or rapid discharging. Above the battery, wavy heat lines rise on one side, labeled Overheating, and small gas wisps rise from the top on the other, labeled Out-gassing.",
        "imageSearchTerm": "Charging or Discharging Too Fast",
        "alt": "An unprotected battery between a charger (rapid charging) and a load (rapid discharging), with heat waves and gas bubbles rising from it: overheating and out-gassing.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-battery-charging.36c75a68.webp"
      },
      "uid": "h64e2qzzz9gu"
    },
    {
      "id": "ht-l15-f-body-current",
      "shape": "fact",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Current Through the Body",
      "body": "**Electrical current** flowing through the body is a health hazard in three ways. It may cause injury by heating body tissue. It may disrupt the electrical functions of cells. It may also cause involuntary muscle contractions.",
      "uid": "kowwek1fje9r4"
    },
    {
      "id": "ht-l15-f-shock-guard",
      "shape": "fact",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Three Ways to Guard Against Shock",
      "body": "Use three-wire cords and plugs for all alternating current (AC) powered equipment. Connect all AC powered station equipment to a common **safety ground**. Ensure that capacitors used for high-voltage direct current (DC) are fully discharged before working inside equipment.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A station bench seen from the front with three plain, unnamed equipment boxes. Each box has a cord ending in a three-prong plug that goes into a wall outlet. A ground wire runs from the back of each box to one shared safety ground bar, and a single conductor leads from that bar down to ground. Put a small note in a corner listing the third guard: discharge high-voltage DC capacitors before working inside.",
        "imageSearchTerm": "Guarding a Station Against Shock",
        "alt": "Guarding a station against shock: three-wire cords on all alternating current (AC) powered equipment, one common safety ground, and high-voltage capacitors discharged before working inside.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-shock-guard.98afd6b7.webp"
      },
      "uid": "1lrk5p81eg73z8"
    },
    {
      "id": "ht-l15-f-stored-charge",
      "shape": "fact",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Danger After Power-Off",
      "body": "A power supply is not safe the instant it is turned off. The hazard that remains is **charge stored** in its filter capacitors. Capacitors must be fully discharged before anyone works inside the equipment.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A power supply drawn as an open box. Inside, its power switch is in the OFF position, drawn as an open switch symbol with the line cord disconnected. Next to the output is a filter capacitor in standard schematic form: two parallel plates. Plus signs on one plate and minus signs on the other show that charge is still stored. A warning callout points at the capacitor.",
        "imageSearchTerm": "Charge Stays After Power-Off",
        "alt": "Charge Stays After Power-Off. A filter capacitor in a power supply still holds charge after the supply is switched off. That stored charge must be discharged before anyone works inside.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-stored-charge.841b8772.webp"
      },
      "uid": "11wj1yy1su0mrs"
    },
    {
      "id": "ht-l15-f-voltmeter-rating",
      "shape": "fact",
      "tags": [
        "safety",
        "test-equipment"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Measuring High Voltage",
      "body": "When measuring high voltages, the key precaution is to ensure that the voltmeter and its leads are **rated** for the voltages being measured.",
      "uid": "l70aus1hs4776"
    },
    {
      "id": "ht-l15-f-fuse-purpose",
      "shape": "fact",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What a Fuse Does",
      "body": "A **fuse** exists to remove power in case of an overload.",
      "illustration": {
        "imagePrompt": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "imageSearchTerm": "fuse",
        "alt": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "kind": "photo",
        "credit": "Wikimedia Commons · André Karwath aka Aka · CC BY-SA 2.5",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electrical_Fuse_(aka).jpg",
        "subject": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-fuse-purpose.89d2dd69.webp"
      },
      "uid": "xjcv6sxu701i"
    },
    {
      "id": "ht-l15-f-fuse-purpose-hero",
      "shape": "fact",
      "title": "Cutting Power on Overload",
      "body": "The purpose of a fuse is to remove power in case of an overload.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "safety",
        "components"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "imageSearchTerm": "fuse",
        "alt": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "kind": "photo",
        "credit": "Wikimedia Commons · André Karwath aka Aka · CC BY-SA 2.5",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electrical_Fuse_(aka).jpg",
        "subject": "A glass cartridge fuse with metal end caps, its thin fuse wire visible inside.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-fuse-purpose.89d2dd69.webp"
      },
      "uid": "1tf2szx1g9i87v"
    },
    {
      "id": "ht-l15-f-fuse-sizing",
      "shape": "fact",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Never Upsize a Fuse",
      "body": "A 5-ampere fuse should never be replaced with a 20-ampere fuse, because **excessive current** could cause a fire. The larger fuse allows more current than the circuit was protected for.",
      "illustration": {
        "imagePrompt": "Plug-in blade fuses of several physical sizes and colors.",
        "imageSearchTerm": "blade fuse",
        "alt": "Plug-in blade fuses of several physical sizes and colors.",
        "kind": "photo",
        "credit": "Wikimedia Commons · havarhen · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Electrical_fuses,_plug-in_type,_different_sizes.jpeg",
        "subject": "Plug-in blade fuses of several physical sizes and colors.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-fuse-sizing.24b026bf.webp"
      },
      "uid": "1u1xs72gc8soq"
    },
    {
      "id": "ht-l15-f-black-wire",
      "shape": "fact",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Black Wire Is Hot",
      "body": "In the United States, black wire insulation in a three-wire 120-volt alternating current (AC) cable indicates the **hot** circuit.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: The end of a round three-wire cable, drawn large and lying diagonally, its outer jacket stripped back to show three insulated conductors that fan out and end in bare copper tips. One conductor is black, one white and one green. Only the black conductor is labeled: a leader line runs from it to the hot tag. The cable label runs along the jacket, and a small caption in a corner gives the country.",
        "imageSearchTerm": "Black Insulation Marks the Hot Wire",
        "alt": "A three-wire 120-volt alternating current (AC) cable with black, white and green conductors; only the black one is labeled: in the United States, black insulation marks the hot wire.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-black-wire.db8412d8.webp"
      },
      "uid": "1vbu1yo1q497ze"
    },
    {
      "id": "ht-l15-f-fuse-placement",
      "shape": "fact",
      "tags": [
        "safety",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Where to Fuse 120-Volt AC",
      "body": "A fuse or circuit breaker in a 120-volt alternating current (AC) power circuit goes **in series** with the hot conductor only.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A simple 120-volt alternating current (AC) circuit drawn as two conductors running from a source to a load. The hot conductor carries a fuse in series. The neutral conductor runs straight through with no fuse in it, and no fuse is placed across the two conductors.",
        "imageSearchTerm": "Fuse on the Hot Conductor",
        "alt": "Fuse on the Hot Conductor: where a fuse or circuit breaker sits in a 120-volt alternating current (AC) circuit: in series with the hot conductor only.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-fuse-purpose.063912d5.webp"
      },
      "uid": "vu9erp5xwddr"
    },
    {
      "id": "ht-l15-f-arrester-place",
      "shape": "fact",
      "tags": [
        "safety",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Lightning Arrester Location",
      "body": "A **lightning arrester** in a coaxial feed line is installed on a grounded panel near where the feed lines enter the building.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side cutaway of a house wall. Outside, an antenna on a mast feeds a coaxial feed line that runs down and toward the wall. Just outside the point where the line passes through the wall, draw a flat metal panel with a ground wire running down from it. A small box on that panel is the lightning arrester, and the coax passes through it. Inside the wall, the coax continues to a plain transceiver box on a desk. Use a single arrow or callout to point at the arrester on the panel at the entry point.",
        "imageSearchTerm": "Where the Lightning Arrester Goes",
        "alt": "Where the Lightning Arrester Goes. The lightning arrester sits on a grounded panel where the coaxial feed line enters the building. It does not go at the antenna or at the radio.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-arrester-place.3e72fa85.webp"
      },
      "uid": "ywpw0tnmrw53"
    },
    {
      "id": "ht-l15-f-ground-rods",
      "shape": "fact",
      "tags": [
        "safety",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Bond All Ground Rods",
      "body": "All external ground rods and earth connections should be **bonded** together with heavy wire or conductive strap.",
      "illustration": {
        "kind": "photo",
        "imagePrompt": "A copper ground rod driven into soil with a heavy copper wire clamped to it.",
        "imageSearchTerm": "copper ground rod clamp wire",
        "alt": "Ground rod with heavy wire clamped to it"
      },
      "uid": "12f08772eexzh"
    },
    {
      "id": "ht-l15-q-fuse-fire",
      "shape": "mcq",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A supply keeps blowing its 5-ampere fuse. A builder wants a 20-ampere fuse in its place. What is the danger?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The fuse would blow too easily"
        },
        {
          "modality": "text",
          "value": "Excess current could cause fire"
        },
        {
          "modality": "text",
          "value": "Output voltage would sag too low"
        },
        {
          "modality": "text",
          "value": "Ripple in the supply would rise"
        }
      ],
      "correctIndex": 1,
      "explanation": "A larger fuse lets more current flow than the circuit was protected for, so wiring can overheat and start a fire. It does not blow more easily; it blows less readily.",
      "uid": "1f879jd1pevp3b"
    },
    {
      "id": "ht-l15-q-arrester-spot",
      "shape": "mcq",
      "tags": [
        "safety",
        "feed-lines"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee adds a lightning arrester to a coaxial feed line. Where does it belong?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At a grounded transceiver jack"
        },
        {
          "modality": "text",
          "value": "At the antenna feed point itself"
        },
        {
          "modality": "text",
          "value": "At the main power service panel"
        },
        {
          "modality": "text",
          "value": "At a grounded panel by the entry"
        }
      ],
      "correctIndex": 3,
      "explanation": "The arrester goes on a grounded panel near where the feed lines enter the building. The transceiver, feed point and power panel are not the spot.",
      "uid": "5ijwqf68j1cz"
    },
    {
      "id": "ht-l15-q-stored-charge",
      "shape": "mcq",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A power supply was switched off a moment ago. What hazard can still be inside it?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Charge in the filter capacitors"
        },
        {
          "modality": "text",
          "value": "Leakage flux in the transformer"
        },
        {
          "modality": "text",
          "value": "Voltage spikes from the diodes"
        },
        {
          "modality": "text",
          "value": "Circulating currents in the filter"
        }
      ],
      "correctIndex": 0,
      "explanation": "Turning the supply off does not remove charge held in its filter capacitors, so they must be discharged first. Flux, diode spikes and circulating currents are not the remaining hazard.",
      "uid": "b8jsmfaz4xyj"
    },
    {
      "id": "ht-l15-q-rod-bonding",
      "shape": "mcq",
      "tags": [
        "safety",
        "station-setup"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A station has several ground rods driven outside. How should they be treated?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Waterproof them with caulk or tape",
          "short": "Waterproof with caulk or tape"
        },
        {
          "modality": "text",
          "value": "Keep them as far apart as possible",
          "short": "Keep as far apart as possible"
        },
        {
          "modality": "text",
          "value": "Bond them with heavy wire or strap",
          "short": "Bond with heavy wire or strap"
        },
        {
          "modality": "text",
          "value": "Tune each for resonance on the band",
          "short": "Tune each for resonance"
        }
      ],
      "correctIndex": 2,
      "explanation": "Rods and earth connections are bonded into one system with heavy wire or conductive strap. Keeping them apart, sealing them, or tuning them does not do this.",
      "uid": "1fv23af1jcmp25"
    },
    {
      "id": "ht-l15-tf-supply-charge",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Switching off a power supply does not remove the charge stored in its filter capacitors.",
      "isTrue": true,
      "why": "The stored charge stays after power-off, so the capacitors must be fully discharged before anyone works inside the equipment.",
      "uid": "15z2pr61185dre"
    },
    {
      "id": "ht-l15-tf-big-fuse",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "components"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A 20-ampere fuse is a safe stand-in for a 5-ampere fuse because it will simply blow less often.",
      "isTrue": false,
      "why": "Blowing less often is the danger. The larger fuse allows more current than the circuit was protected for, and excessive current could cause a fire.",
      "uid": "99ycb11dbj6o9"
    },
    {
      "id": "ht-l15-c-fuse-hot",
      "shape": "cloze",
      "tags": [
        "safety",
        "circuits"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "In a 120-volt alternating current (AC) circuit, a fuse goes in series with the ___ conductor only.",
      "answer": "hot",
      "distractors": [
        "neutral",
        "ground",
        "negative"
      ],
      "explanation": "The fuse or breaker sits in series with the hot conductor only. It is not placed on the neutral, and it is not placed in parallel.",
      "uid": "1at51jp15t648j"
    },
    {
      "id": "ht-l15-p-black-wire",
      "shape": "pair",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Black 120-volt wire"
      },
      "sideB": {
        "modality": "text",
        "value": "Hot, in a 120-volt alternating current (AC) cable",
        "short": "The hot circuit"
      },
      "uid": "107j3mj13apopv"
    },
    {
      "id": "ht-l15-f-tower-ground-wires",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Short, Direct Ground Wires",
      "body": "For lightning protection, ground wires on a tower should have connections that are **short and direct**. Sharp bends must be avoided.",
      "uid": "g0niwl1hufqd3"
    },
    {
      "id": "ht-l15-f-climbing-needs",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Requirements for Climbing",
      "body": "Three things are required when climbing an antenna tower. The climber needs sufficient training on safe climbing techniques. Appropriate **tie-off** to the tower is needed at all times. An approved climbing harness must always be worn.",
      "uid": "1sq1nzbsmnvun"
    },
    {
      "id": "ht-l15-f-no-solo-climb",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Never Climb Without a Helper",
      "body": "No circumstance makes it safe to climb a tower without a **helper or observer**. Doing no electrical work, doing no mechanical work, or working no more than 20 feet up does not change this.",
      "uid": "1y75ejopclmii"
    },
    {
      "id": "ht-l15-f-overhead-wires",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Watch for Overhead Wires",
      "body": "An important precaution when putting up an antenna tower is to look for and stay clear of any **overhead electrical wires**.",
      "uid": "1e1ql8711apem3"
    },
    {
      "id": "ht-l15-f-turnbuckle-wire",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Turnbuckle Safety Wire",
      "body": "A **turnbuckle** is used to tension a guy line. A safety wire through it has one purpose: to prevent loosening of the turnbuckle from vibration.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A tower with one guy line running diagonally down to a ground anchor. Near the anchor, a turnbuckle sits in line with the guy line. A magnified circular inset shows the turnbuckle: an open frame body with a threaded eye bolt at each end. A thin safety wire is threaded through both eyes and the body and twisted closed so the body cannot turn. Small wavy marks beside the guy line indicate vibration.",
        "imageSearchTerm": "Safety Wire Through a Turnbuckle",
        "alt": "Safety Wire Through a Turnbuckle: where the turnbuckle sits in a guy line and how a safety wire through it stops vibration from loosening it.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-turnbuckle-wire.da1ed723.webp"
      },
      "uid": "5g5wa617wn4ey"
    },
    {
      "id": "ht-l15-f-power-line-distance",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Distance From Power Lines",
      "body": "The minimum safe distance from a power line is a condition on a falling antenna. Enough distance must be allowed so that if the antenna falls, no part of it can come within **10 feet** of the power wires.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view of an antenna tipped over as if falling, beside a power line. A 10-foot distance is marked between the tip of the fallen antenna and the nearest power wire.",
        "imageSearchTerm": "Clearance From Power Lines",
        "alt": "Clearance From Power Lines: the minimum distance a falling antenna must stay from power wires: no part within 10 feet of them.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-power-line-distance.7fd7ad3c.webp"
      },
      "uid": "l1wi421vuhuds"
    },
    {
      "id": "ht-l15-f-crank-up",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Crank-Up Tower Rule",
      "body": "A **crank-up tower** must not be climbed unless it is retracted, or mechanical safety locking devices have been installed.",
      "illustration": {
        "kind": "photo",
        "imagePrompt": "A crank-up amateur radio tower partly extended beside a house, seen from the ground.",
        "imageSearchTerm": "crank-up amateur radio tower",
        "alt": "Crank-up tower extended beside a house",
        "credit": "Wikimedia Commons · Eclypes2008 · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:120_cell_on_wheels_crank_up_tower.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-crank-up.b13ead9d.webp"
      },
      "uid": "dgfmgx14kuayf"
    },
    {
      "id": "ht-l15-f-crank-up-hero",
      "shape": "fact",
      "title": "Climbing a Crank-Up",
      "body": "Before anyone climbs a crank-up tower, it must be retracted or have mechanical safety locking devices installed. If neither is true, stay on the ground.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "safety",
        "antennas"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "kind": "photo",
        "imagePrompt": "A crank-up amateur radio tower partly extended beside a house, seen from the ground.",
        "imageSearchTerm": "crank-up amateur radio tower",
        "alt": "Crank-up tower extended beside a house",
        "credit": "Wikimedia Commons · Eclypes2008 · CC BY-SA 3.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:120_cell_on_wheels_crank_up_tower.jpg",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-crank-up.b13ead9d.webp"
      },
      "uid": "qb3d1ohcvwty"
    },
    {
      "id": "ht-l15-f-tower-ground-rods",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Grounding a Tower",
      "body": "A proper grounding method for a tower is a set of separate **eight-foot ground rods** for each tower leg, bonded to the tower and to each other.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A tower standing on a ground plane with three legs. A separate ground rod is driven into the soil at the base of each leg. Each rod is connected to its leg, and a bond wire links the rods to each other and to the tower.",
        "imageSearchTerm": "Bonded Ground Rods at a Tower",
        "alt": "Bonded Ground Rods at a Tower: the proper tower grounding method: a separate ground rod for each tower leg, all bonded together.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-tower-ground-wires.3de48fb7.webp"
      },
      "uid": "vwxqy01p3u1oe"
    },
    {
      "id": "ht-l15-f-utility-pole",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "No Antennas on Utility Poles",
      "body": "An antenna should never be attached to a **utility pole**, because it could contact high-voltage power lines.",
      "illustration": {
        "imagePrompt": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "imageSearchTerm": "utility pole",
        "alt": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Dietmar Rabich · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Rawlinna_(AU),_Utility_Pole_--_2019_--_0621.jpg",
        "subject": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-utility-pole.22f3edfb.webp"
      },
      "uid": "t1zhpy6oyopw"
    },
    {
      "id": "ht-l15-f-utility-pole-hero",
      "shape": "fact",
      "title": "Antennas and Utility Poles",
      "body": "Never attach an antenna to a utility pole. The antenna could contact high-voltage power lines.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "tags": [
        "safety",
        "antennas"
      ],
      "factVariant": "image-heavy",
      "illustration": {
        "imagePrompt": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "imageSearchTerm": "utility pole",
        "alt": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "kind": "photo",
        "credit": "Wikimedia Commons · Dietmar Rabich · CC BY-SA 4.0",
        "creditUrl": "https://commons.wikimedia.org/wiki/File:Rawlinna_(AU),_Utility_Pole_--_2019_--_0621.jpg",
        "subject": "A wooden utility pole with crossarms and overhead power lines against a blue sky.",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-utility-pole.22f3edfb.webp"
      },
      "uid": "10weqfr1uq3dij"
    },
    {
      "id": "ht-l15-f-sharp-bends",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Avoid Sharp Bends",
      "body": "**Sharp bends** must be avoided in grounding conductors used for lightning protection.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two panels side by side. Each shows the base of a tower leg, a grounding conductor, and a ground rod in the soil. Left panel (good): the conductor runs from the tower to the rod in a short, direct path, with only a gentle, wide curve. Mark it with a check mark. Right panel (bad): the conductor zigzags with several sharp right-angle bends before it reaches the rod. Mark it with a cross.",
        "imageSearchTerm": "Short, Direct Ground Wires With No Sharp Bends",
        "alt": "Short, Direct Ground Wires With No Sharp Bends: a good lightning grounding conductor, short and direct with no sharp bends, beside a bad one.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-sharp-bends.27abec78.webp"
      },
      "uid": "1jzuwhm1nz81uk"
    },
    {
      "id": "ht-l15-f-local-codes",
      "shape": "fact",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Who Sets Grounding Rules",
      "body": "**Local electrical codes** establish grounding requirements for an amateur radio tower or antenna.",
      "uid": "1mdkptb1w3d2kr"
    },
    {
      "id": "ht-l15-d-faa",
      "shape": "definition",
      "tags": [
        "rules",
        "safety"
      ],
      "source": {
        "label": "FCC — 47 CFR § 97.3 Definitions",
        "url": "https://www.ecfr.gov/current/title-47/section-97.3"
      },
      "term": {
        "modality": "text",
        "value": "FAA"
      },
      "definition": {
        "modality": "text",
        "value": "Federal Aviation Administration",
        "short": "Federal Aviation Administration"
      },
      "uid": "sb2t8ugcjb62"
    },
    {
      "id": "ht-l15-q-power-line",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee plans an antenna near a power line. Which distance rule applies?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Half a wavelength at the frequency",
          "short": "Half a wavelength"
        },
        {
          "modality": "text",
          "value": "Antenna plus line height, times 1.5",
          "short": "Heights added, times 1.5"
        },
        {
          "modality": "text",
          "value": "No part within 10 feet if it falls",
          "short": "10 feet clear if it falls"
        },
        {
          "modality": "text",
          "value": "The height of the line above ground",
          "short": "Line height above ground"
        }
      ],
      "correctIndex": 2,
      "explanation": "Enough distance is needed so that, if the antenna falls, no part of it can come within 10 feet of the power wires. Wavelength or height formulas are not the rule.",
      "uid": "70iys5zbq015"
    },
    {
      "id": "ht-l15-q-turnbuckle",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Guy-line turnbuckles on a tower are secured with safety wire. What problem does that address?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Vibration loosening the turnbuckle",
          "short": "Vibration loosening it"
        },
        {
          "modality": "text",
          "value": "A broken turnbuckle letting go"
        },
        {
          "modality": "text",
          "value": "Lack of a lightning ground path"
        },
        {
          "modality": "text",
          "value": "No way to measure line tension"
        }
      ],
      "correctIndex": 0,
      "explanation": "The wire's one purpose is to keep vibration from loosening the turnbuckle. It is not a backup for breakage, a lightning path, or a tension gauge.",
      "uid": "tuzd0h16b704z"
    },
    {
      "id": "ht-l15-q-tower-ground",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Which setup properly grounds a tower?"
      },
      "options": [
        {
          "modality": "text",
          "value": "One four-foot rod beside the base",
          "short": "One four-foot rod"
        },
        {
          "modality": "text",
          "value": "A ferrite-core choke to ground"
        },
        {
          "modality": "text",
          "value": "A connection to a cold-water pipe",
          "short": "A cold-water pipe link"
        },
        {
          "modality": "text",
          "value": "Bonded eight-foot rods at each leg",
          "short": "Bonded eight-foot rods per leg"
        }
      ],
      "correctIndex": 3,
      "explanation": "Each tower leg gets its own eight-foot rod, bonded to the tower and to the other rods. A single short rod, a choke, or a water pipe is not a proper method.",
      "uid": "1bsweyu1hl0cni"
    },
    {
      "id": "ht-l15-q-overhead",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Before raising a tower, which precaution is important?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Wear a ground strap on the wrist"
        },
        {
          "modality": "text",
          "value": "Look for and avoid overhead wires",
          "short": "Avoid overhead wires"
        },
        {
          "modality": "text",
          "value": "Insulate the base of the tower"
        },
        {
          "modality": "text",
          "value": "Make all ground bends right angles",
          "short": "Right-angle ground bends"
        }
      ],
      "correctIndex": 1,
      "explanation": "Looking for and staying clear of overhead electrical wires is the precaution. A wrist strap and an insulated base are not, and right-angle ground bends are poor practice.",
      "uid": "138eq1f1tkx7o7"
    },
    {
      "id": "ht-l15-tf-sharp-bends",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Sharp bends should be avoided in grounding conductors used for lightning protection.",
      "isTrue": true,
      "why": "Sharp bends must be avoided, so careful right-angle bends are not good practice. Short, direct connections are preferred.",
      "uid": "1btsl51u5mg8t"
    },
    {
      "id": "ht-l15-tf-low-climb",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "A climber working no more than 20 feet above the ground may skip the helper or observer.",
      "isTrue": false,
      "why": "Low height does not change the rule. No circumstance makes it safe to climb a tower without a helper or observer.",
      "uid": "1eu8bjx13sz2gf"
    },
    {
      "id": "ht-l15-c-crank-lock",
      "shape": "cloze",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A crank-up tower must not be climbed unless it is retracted or has mechanical safety ___ devices installed.",
      "answer": "locking",
      "distractors": [
        "tensioning",
        "grounding",
        "measuring"
      ],
      "explanation": "Climbing is allowed only when the tower is retracted or mechanical safety locking devices have been installed.",
      "uid": "1y2kxms6di5bw"
    },
    {
      "id": "ht-l15-p-tower-rods",
      "shape": "pair",
      "tags": [
        "safety",
        "antennas"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Tower ground rods"
      },
      "sideB": {
        "modality": "text",
        "value": "Eight feet, one per leg, bonded"
      },
      "uid": "3z2y8u2vaywa"
    },
    {
      "id": "ht-l15-f-nonionizing",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Radio Signals Are Non-Ionizing",
      "body": "As **non-ionizing radiation**, radio signals lack the energy to cause chemical changes in cells and damage DNA, unlike ionizing radiation (radioactivity). That does not make them harmless: Federal Communications Commission rules still limit exposure.",
      "uid": "1nxhej21xvy0ou"
    },
    {
      "id": "ht-l15-f-rf-vs-ionizing",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Radio Frequency vs. Ionizing Radiation",
      "body": "Radio frequency (RF) radiation differs from ionizing radiation (radioactivity). It does not have sufficient energy to cause chemical changes in cells and damage DNA. That does not make it harmless, because RF exposure is still limited.",
      "uid": "2jyd3y1mnsvrg"
    },
    {
      "id": "ht-l15-f-exposure-factors",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Affects Exposure",
      "body": "The radio frequency (RF) exposure of people near an amateur antenna depends on three factors. These are the frequency and power level of the field, the distance from the antenna to a person, and the **radiation pattern** of the antenna.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A side view of an antenna on a mast. A shaded radiation pattern lobe spreads out sideways from the antenna. A simple, faceless human silhouette stands on the ground some distance away. A dimension arrow runs from the antenna to the person. A tag at the antenna notes the frequency and power level of the field. A callout points at the lobe.",
        "imageSearchTerm": "Three Things That Set RF Exposure",
        "alt": "Three Things That Set Radio Frequency (RF) Exposure: the field's frequency and power level, the person's distance from the antenna, and the antenna's radiation pattern.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-exposure-factors.9ea534b0.webp"
      },
      "uid": "1hu6mgb1ev8a51"
    },
    {
      "id": "ht-l15-f-freq-limits",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Limits Vary With Frequency",
      "body": "Exposure limits vary with frequency because the human body **absorbs** more radio frequency (RF) energy at some frequencies than at others.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal frequency axis, not to scale, with four evenly spaced markers in order: 3.5 MHz, 50 MHz, 440 MHz, 1296 MHz. The 50 MHz marker is highlighted with a stronger tone and a callout. A note at the foot explains why limits vary with frequency.",
        "imageSearchTerm": "Which Band Has the Lowest Exposure Limit",
        "alt": "Which band has the lowest exposure limit: 3.5, 50, 440 and 1296 megahertz (MHz) on a frequency axis, with 50 MHz marked as having the lowest maximum permissible exposure.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-freq-limits.a3c9afbe.webp"
      },
      "uid": "5c8ami1h1wz04"
    },
    {
      "id": "ht-l15-f-lowest-mpe",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "bands"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Lowest Permissible Exposure Band",
      "body": "Among 3.5 megahertz (MHz), 50 MHz, 440 MHz, and 1296 MHz, the **50 MHz** band has the lowest maximum permissible exposure for radio frequency (RF) safety.",
      "uid": "jdvc3lgaxc09"
    },
    {
      "id": "ht-l15-f-duty-cycle-def",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "What Duty Cycle Means",
      "body": "**Duty cycle** during the averaging time for radio frequency (RF) exposure is the percentage of time that a transmitter is transmitting.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: A horizontal time axis with a bracket spanning the full averaging time. Along it, draw a single on/off track. Raised filled blocks are periods when the transmitter is transmitting. Flat gaps between them are periods when it is not. A callout states that duty cycle is the transmitting time as a percentage of the averaging time.",
        "imageSearchTerm": "What Duty Cycle Measures",
        "alt": "What Duty Cycle Measures: duty cycle as the share of the averaging time during which the transmitter is transmitting.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-duty-cycle-def.c7c4dc5a.webp"
      },
      "uid": "osba531vgfjkd"
    },
    {
      "id": "ht-l15-f-duty-cycle-why",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Why Duty Cycle Matters",
      "body": "Duty cycle is one of the factors used to determine safe radio frequency (RF) exposure levels. It matters because it affects the **average exposure** to radiation. A lower duty cycle means less average exposure.",
      "uid": "1mp5nk2glkle6"
    },
    {
      "id": "ht-l15-f-duty-cycle-power",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Duty Cycle and Power Density",
      "body": "When duty cycle changes from 100 percent to 50 percent, the **allowable power density** for radio frequency (RF) safety increases by a factor of 2. An adjustment for a lower duty cycle is allowed.",
      "illustration": {
        "kind": "diagram",
        "imagePrompt": "FlashFeed original diagram: Two side-by-side columns. Left column: a small on/off track that is solid for the whole period, labeled 100 percent duty cycle, above a bar for allowable power density. Right column: a track that is on half the time and off half the time, labeled 50 percent duty cycle, above a bar exactly twice the height of the left bar. A curved arrow between the two bars carries the factor of 2. Put a note at the foot about average exposure.",
        "imageSearchTerm": "Halving Duty Cycle Doubles Allowable Power Density",
        "alt": "Halving Duty Cycle Doubles Allowable Power Density: 100 percent and 50 percent duty cycle side by side; the lower duty cycle cuts average exposure.",
        "credit": "FlashFeed original diagram · CC-BY-4.0",
        "url": "https://cdn.recurxive.com/packs/ham-radio-technician/images/ht-l15-f-duty-cycle-power.f06f276e.webp"
      },
      "uid": "17lvfxs2rhe3o"
    },
    {
      "id": "ht-l15-f-rf-burn",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Touching a Transmitting Antenna",
      "body": "Touching an antenna during a transmission creates the hazard of a radio frequency (RF) **burn to skin**.",
      "uid": "ewk8tz3q57ml"
    },
    {
      "id": "ht-l15-f-compliance-methods",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Ways to Show Compliance",
      "body": "Any of three methods is acceptable to show a station complies with Federal Communications Commission (FCC) radio frequency (RF) exposure regulations. These are calculation based on FCC Office of Engineering and Technology (OET) Bulletin 65, **computer modeling**, and measurement of field strength with calibrated equipment.",
      "uid": "13dzwczzz3oe1"
    },
    {
      "id": "ht-l15-f-staying-compliant",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Staying in Compliance",
      "body": "A station stays in compliance by **re-evaluating** it whenever an item in the transmitter or antenna system is changed.",
      "uid": "ki8s601knijg4"
    },
    {
      "id": "ht-l15-f-reduce-exposure",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Reducing RF Exposure",
      "body": "**Relocating antennas** can reduce exposure to radio frequency (RF) radiation.",
      "uid": "14b1u81m9fixh"
    },
    {
      "id": "ht-l15-f-licensee-duty",
      "shape": "fact",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "title": "Who Is Responsible",
      "body": "The **station licensee** is responsible for ensuring that no person is exposed to radio frequency (RF) energy above the Federal Communications Commission (FCC) exposure limits.",
      "uid": "e5sd2q1smevia"
    },
    {
      "id": "ht-l15-q-duty-half",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A station cuts its transmit time from always on to half the time. How does allowable radio frequency (RF) power density change?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It decreases by half"
        },
        {
          "modality": "text",
          "value": "It increases threefold"
        },
        {
          "modality": "text",
          "value": "It increases twofold"
        },
        {
          "modality": "text",
          "value": "It does not change"
        }
      ],
      "correctIndex": 2,
      "explanation": "Halving the duty cycle from 100 percent to 50 percent lets the allowable power density increase by a factor of 2. An adjustment for lower duty cycle is allowed, and it is not a decrease.",
      "uid": "2vcuvu15q0smq"
    },
    {
      "id": "ht-l15-q-touch-antenna",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Someone grabs an antenna in the middle of a transmission. What hazard results?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Burn to the skin"
        },
        {
          "modality": "text",
          "value": "Electrocution"
        },
        {
          "modality": "text",
          "value": "Ionizing radiation"
        },
        {
          "modality": "text",
          "value": "Stored capacitor charge"
        }
      ],
      "correctIndex": 0,
      "explanation": "Touching a transmitting antenna creates the hazard of a radio frequency (RF) burn to skin. It is not electrocution or ionizing radiation, and stored capacitor charge is a power-supply hazard.",
      "uid": "enuvial9g1iw"
    },
    {
      "id": "ht-l15-q-licensee",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A neighbor worries about an antenna. Who must ensure no one is exposed to radio frequency (RF) energy above the Federal Communications Commission (FCC) limits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The local zoning board"
        },
        {
          "modality": "text",
          "value": "Anyone near the antenna"
        },
        {
          "modality": "text",
          "value": "The licensing agency"
        },
        {
          "modality": "text",
          "value": "The station licensee"
        }
      ],
      "correctIndex": 3,
      "explanation": "The station licensee carries the responsibility. It does not rest on the licensing agency, on people near the antenna, or on the local zoning board.",
      "uid": "xvnado1xxue9e"
    },
    {
      "id": "ht-l15-q-recompliance",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "A licensee replaces the antenna. What keeps the station in radio frequency (RF) safety compliance?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Notifying the agency of changes"
        },
        {
          "modality": "text",
          "value": "Re-evaluating after the change"
        },
        {
          "modality": "text",
          "value": "Keeping standing wave ratio low"
        },
        {
          "modality": "text",
          "value": "Using only lab-approved gear"
        }
      ],
      "correctIndex": 1,
      "explanation": "A change to the transmitter or antenna system calls for a fresh evaluation. Reporting changes, low standing wave ratio, or approved gear does not keep a station compliant.",
      "uid": "1k30lxc1mmm4eq"
    },
    {
      "id": "ht-l15-q-limit-reason",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "prompt": {
        "modality": "text",
        "value": "Why do radio frequency (RF) exposure limits differ from band to band?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Body absorption varies with frequency",
          "short": "Absorption varies by frequency"
        },
        {
          "modality": "text",
          "value": "Lower frequencies carry more energy",
          "short": "Low bands carry more energy"
        },
        {
          "modality": "text",
          "value": "Lower frequencies cannot enter the body",
          "short": "Low bands cannot enter the body"
        },
        {
          "modality": "text",
          "value": "Higher frequencies are only transient",
          "short": "High bands are only transient"
        }
      ],
      "correctIndex": 0,
      "explanation": "The human body absorbs more RF energy at some frequencies than at others, so limits vary. Lower frequencies do not carry more energy, and they do penetrate the body.",
      "uid": "9420c0hy5bhs"
    },
    {
      "id": "ht-l15-tf-rf-limited",
      "shape": "trueFalse",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Radio frequency (RF) radiation lacks the energy to cause chemical changes in cells and damage DNA, yet it is not perfectly safe, and Federal Communications Commission (FCC) rules limit exposure to it.",
      "isTrue": true,
      "why": "RF lacks the energy to cause chemical changes in cells and damage DNA, which sets it apart from ionizing radiation. That does not make it perfectly safe, and FCC rules limit exposure.",
      "uid": "38d06lqpc4ll"
    },
    {
      "id": "ht-l15-tf-low-freq-energy",
      "shape": "trueFalse",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Radio frequency (RF) limits vary with frequency because lower frequency fields carry more energy than higher ones.",
      "isTrue": false,
      "why": "Limits vary with frequency because the human body absorbs more RF energy at some frequencies than at others, not because of how much energy lower frequency fields carry.",
      "uid": "1mtcslm1wwbfgk"
    },
    {
      "id": "ht-l15-tf-modeling",
      "shape": "trueFalse",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Computer modeling is an acceptable way to show a station meets Federal Communications Commission (FCC) radio frequency (RF) exposure rules.",
      "isTrue": true,
      "why": "Calculation from the FCC bulletin, computer modeling, and measuring field strength with calibrated equipment are all acceptable methods.",
      "uid": "a24nu31jhnywp"
    },
    {
      "id": "ht-l15-c-avg-exposure",
      "shape": "cloze",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "template": "A lower duty cycle means less ___ exposure to radio frequency (RF) energy.",
      "answer": "average",
      "distractors": [
        "peak",
        "localized",
        "ionizing"
      ],
      "explanation": "Duty cycle affects the average exposure to radiation, because it sets how much of the time the transmitter is transmitting.",
      "uid": "1dfgyd7tpx7u1"
    },
    {
      "id": "ht-l15-p-duty-cycle",
      "shape": "pair",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "sideA": {
        "modality": "text",
        "value": "Duty cycle"
      },
      "sideB": {
        "modality": "text",
        "value": "Percent of time a radio frequency (RF) transmitter transmits"
      },
      "uid": "16lygao18zpuws"
    },
    {
      "id": "ht-l15-tf-battery-short",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Shorting the terminals of an unprotected 12-volt battery can cause burns, fire, or an explosion.",
      "isTrue": true,
      "why": "A 12-volt storage battery that lacks internal protection circuitry is a hazard because shorting its terminals can cause burns, fire, or an explosion.",
      "uid": "knlc2t14g38c5"
    },
    {
      "id": "ht-l15-tf-current-ways",
      "shape": "trueFalse",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "statement": "Current flowing through the body is a hazard only because it heats body tissue.",
      "isTrue": false,
      "why": "Heating tissue is one of three ways. Current may also disrupt the electrical functions of cells and cause involuntary muscle contractions.",
      "uid": "15dvkq81wjqvps"
    },
    {
      "id": "ot-ht-l15-t0a01",
      "shape": "mcq",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is a safety hazard of a 12-volt storage battery that lacks internal protection circuitry?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Touching both terminals with your hands can cause electrical shock"
        },
        {
          "modality": "text",
          "value": "Shorting the terminals can cause burns, fire, or an explosion"
        },
        {
          "modality": "text",
          "value": "RF emissions from a nearby transmitter can cause the electrolyte to emit poison gas"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "Shorting the terminals of an unprotected 12-volt battery can cause burns, fire, or an explosion. Touching both terminals is not the hazard named. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "mnvivs1on9mu0"
    },
    {
      "id": "ot-ht-l15-t0a10",
      "shape": "mcq",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What hazard exists when rapidly charging or discharging an unprotected battery?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Overheating or out-gassing"
        },
        {
          "modality": "text",
          "value": "Excess output ripple"
        },
        {
          "modality": "text",
          "value": "Electric shock"
        },
        {
          "modality": "text",
          "value": "Overvoltage"
        }
      ],
      "correctIndex": 0,
      "explanation": "Rapid charging or discharging of an unprotected battery risks overheating or out-gassing.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19mznhh15imfwn"
    },
    {
      "id": "ot-ht-l15-t0a02",
      "shape": "mcq",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What health hazard is posed by electrical current flowing through the body?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It may cause injury by heating body tissue"
        },
        {
          "modality": "text",
          "value": "It may disrupt the electrical functions of cells"
        },
        {
          "modality": "text",
          "value": "It may cause involuntary muscle contractions"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Current can heat tissue, disrupt the electrical functions of cells, and cause involuntary muscle contractions. All three are real.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "f4jbs6f6k7ak"
    },
    {
      "id": "ot-ht-l15-t0a06",
      "shape": "mcq",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is a good way to guard against electrical shock at your station?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Use three-wire cords and plugs for all AC powered equipment"
        },
        {
          "modality": "text",
          "value": "Connect all AC powered station equipment to a common safety ground"
        },
        {
          "modality": "text",
          "value": "Fully discharge all high-voltage DC capacitors before working inside equipment"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Three-wire cords, a common safety ground, and fully discharged high-voltage capacitors are all good shock precautions. AC stands for alternating current and DC stands for direct current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1n5wzf3hjj1dr"
    },
    {
      "id": "ot-ht-l15-t0a11",
      "shape": "mcq",
      "tags": [
        "safety",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What hazard exists in a power supply immediately after turning it off?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Circulating currents in the dc filter"
        },
        {
          "modality": "text",
          "value": "Leakage flux in the power transformer"
        },
        {
          "modality": "text",
          "value": "Voltage transients from kickback diodes"
        },
        {
          "modality": "text",
          "value": "Charge stored in filter capacitors"
        }
      ],
      "correctIndex": 3,
      "explanation": "Turning a supply off does not remove charge stored in its filter capacitors.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1a2bn751wodcld"
    },
    {
      "id": "ot-ht-l15-t0a12",
      "shape": "mcq",
      "tags": [
        "safety",
        "test-equipment"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following precautions should be taken when measuring high voltages with a voltmeter?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Ensure that the voltmeter has very low impedance"
        },
        {
          "modality": "text",
          "value": "Ensure that the voltmeter and its leads are rated for use at the voltages being measured"
        },
        {
          "modality": "text",
          "value": "Ensure that the circuit is grounded through the voltmeter"
        },
        {
          "modality": "text",
          "value": "Ensure that the voltmeter is set to the correct frequency"
        }
      ],
      "correctIndex": 1,
      "explanation": "The meter and its leads must be rated for the voltages measured. Low impedance, grounding through the meter, or a frequency setting are not the precautions.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1vxyf361wgekku"
    },
    {
      "id": "ot-ht-l15-t0a04",
      "shape": "mcq",
      "tags": [
        "safety",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the purpose of a fuse in an electrical circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "To prevent power supply ripple from damaging a component"
        },
        {
          "modality": "text",
          "value": "To remove power in case of an overload"
        },
        {
          "modality": "text",
          "value": "To limit current and prevent shocks"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "A fuse removes power in case of an overload. It does not limit current to prevent shocks or stop ripple.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1pqi3uw6cw8eo"
    },
    {
      "id": "ot-ht-l15-t0a05",
      "shape": "mcq",
      "tags": [
        "safety",
        "components"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why should a 5-ampere fuse never be replaced with a 20-ampere fuse?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The larger fuse would be likely to blow because it is rated for higher current"
        },
        {
          "modality": "text",
          "value": "The power supply ripple would greatly increase"
        },
        {
          "modality": "text",
          "value": "Excessive current could cause a fire"
        },
        {
          "modality": "text",
          "value": "Higher current fuse voltage drop could result in excessively low voltage to the device"
        }
      ],
      "correctIndex": 2,
      "explanation": "A 20-ampere fuse allows more current than the circuit was protected for, so excessive current could cause a fire.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "utyx0w9buk70"
    },
    {
      "id": "ot-ht-l15-t0a03",
      "shape": "mcq",
      "tags": [
        "safety",
        "electrical-principles"
      ],
      "prompt": {
        "modality": "text",
        "value": "In the United States, what circuit does black wire insulation indicate in a three-wire 120 V AC cable?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Neutral"
        },
        {
          "modality": "text",
          "value": "Hot"
        },
        {
          "modality": "text",
          "value": "Equipment ground"
        },
        {
          "modality": "text",
          "value": "Negative"
        }
      ],
      "correctIndex": 1,
      "explanation": "In the United States, black insulation in a three-wire 120-volt alternating current (AC) cable marks the hot circuit.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "m4dwzc2t8ob2"
    },
    {
      "id": "ot-ht-l15-t0a08",
      "shape": "mcq",
      "tags": [
        "safety",
        "circuits"
      ],
      "prompt": {
        "modality": "text",
        "value": "Where should a fuse or circuit breaker be installed in a 120V AC power circuit?"
      },
      "options": [
        {
          "modality": "text",
          "value": "In series with the hot conductor only"
        },
        {
          "modality": "text",
          "value": "In series with the hot and neutral conductors"
        },
        {
          "modality": "text",
          "value": "In parallel with the hot conductor only"
        },
        {
          "modality": "text",
          "value": "In parallel with the hot and neutral conductors"
        }
      ],
      "correctIndex": 0,
      "explanation": "The fuse or breaker goes in series with the hot conductor only, not both conductors and not in parallel. AC stands for alternating current.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1i1rnb71o0n7nb"
    },
    {
      "id": "ot-ht-l15-t0a07",
      "shape": "mcq",
      "tags": [
        "safety",
        "feed-lines"
      ],
      "prompt": {
        "modality": "text",
        "value": "Where should a lightning arrester be installed in a coaxial feed line?"
      },
      "options": [
        {
          "modality": "text",
          "value": "At the output connector of a transceiver"
        },
        {
          "modality": "text",
          "value": "At the antenna feed point"
        },
        {
          "modality": "text",
          "value": "At the AC power service panel"
        },
        {
          "modality": "text",
          "value": "On a grounded panel near where feed lines enter the building"
        }
      ],
      "correctIndex": 3,
      "explanation": "The arrester sits on a grounded panel near where the feed lines enter the building, not at the transceiver, feed point, or alternating current (AC) panel.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1b6mj6f2qoptx"
    },
    {
      "id": "ot-ht-l15-t0a09",
      "shape": "mcq",
      "tags": [
        "safety",
        "station-setup"
      ],
      "prompt": {
        "modality": "text",
        "value": "What should be done to all external ground rods or earth connections?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Waterproof them with silicone caulk or electrical tape"
        },
        {
          "modality": "text",
          "value": "Keep them as far apart as possible"
        },
        {
          "modality": "text",
          "value": "Bond them together with heavy wire or conductive strap"
        },
        {
          "modality": "text",
          "value": "Tune them for resonance on the lowest frequency of operation"
        }
      ],
      "correctIndex": 2,
      "explanation": "External ground rods and earth connections are bonded together with heavy wire or conductive strap.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1lt6fer4yz7"
    },
    {
      "id": "ot-ht-l15-t0b02",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is required when climbing an antenna tower?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Have sufficient training on safe tower climbing techniques"
        },
        {
          "modality": "text",
          "value": "Use appropriate tie-off to the tower at all times"
        },
        {
          "modality": "text",
          "value": "Always wear an approved climbing harness"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Training, constant tie-off, and an approved harness are all required when climbing a tower.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "19nvucy18wvknk"
    },
    {
      "id": "ot-ht-l15-t0b03",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Under what circumstances is it safe to climb a tower without a helper or observer?"
      },
      "options": [
        {
          "modality": "text",
          "value": "When no electrical work is being performed"
        },
        {
          "modality": "text",
          "value": "When no mechanical work is being performed"
        },
        {
          "modality": "text",
          "value": "When the work being done is not more than 20 feet above the ground"
        },
        {
          "modality": "text",
          "value": "Never"
        }
      ],
      "correctIndex": 3,
      "explanation": "No circumstance makes solo climbing safe. Doing no electrical or mechanical work, or working no more than 20 feet up, does not change that.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "fucgmc1hfwz0"
    },
    {
      "id": "ot-ht-l15-t0b07",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an important safety rule to remember when using a crank-up tower?"
      },
      "options": [
        {
          "modality": "text",
          "value": "This type of tower must never be painted"
        },
        {
          "modality": "text",
          "value": "This type of tower must never be grounded"
        },
        {
          "modality": "text",
          "value": "This type of tower can't be climbed unless retracted or mechanical safety locks are used"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "A crank-up tower may be climbed only when retracted or when mechanical safety locking devices are installed.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "6tnlj5hh5ijl"
    },
    {
      "id": "ot-ht-l15-t0b04",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an important safety precaution to observe when putting up an antenna tower?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Wear a ground strap connected to your wrist at all times"
        },
        {
          "modality": "text",
          "value": "Insulate the base of the tower to avoid lightning strikes"
        },
        {
          "modality": "text",
          "value": "Look for and stay clear of any overhead electrical wires"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Looking for and staying clear of overhead electrical wires is the precaution. A wrist strap and insulated base are not.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "lal9t81uef3uk"
    },
    {
      "id": "ot-ht-l15-t0b06",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the minimum safe distance from a power line to allow when installing an antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Add antenna height to power line height and multiply by 1.5"
        },
        {
          "modality": "text",
          "value": "The height of the power line above ground"
        },
        {
          "modality": "text",
          "value": "1/2 wavelength at the operating frequency"
        },
        {
          "modality": "text",
          "value": "Enough that a falling antenna cannot come within 10 feet of the power wires"
        }
      ],
      "correctIndex": 3,
      "explanation": "The distance must keep every part of a fallen antenna at least 10 feet from the power wires.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "zs58rd1iuvhn"
    },
    {
      "id": "ot-ht-l15-t0b09",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why should you avoid attaching an antenna to a utility pole?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The antenna will not work properly because of induced voltages"
        },
        {
          "modality": "text",
          "value": "The antenna may unbalance the power transformer, causing power fluctuations"
        },
        {
          "modality": "text",
          "value": "The antenna could contact high-voltage power lines"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "An antenna on a utility pole could contact high-voltage power lines.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "h7x8kt1vmsg4f"
    },
    {
      "id": "ot-ht-l15-t0b01",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is good practice when installing ground wires on a tower for lightning protection?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Put a drip loop in the ground connection to prevent water damage to the ground system"
        },
        {
          "modality": "text",
          "value": "Make sure all ground wire bends are right angles"
        },
        {
          "modality": "text",
          "value": "Ensure that connections are short and direct"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 2,
      "explanation": "Lightning ground wires should have short, direct connections, and right-angle bends are not good practice.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "bjtat3f19gdr"
    },
    {
      "id": "ot-ht-l15-t0b10",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is true when installing grounding conductors used for lightning protection?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Use only non-insulated wire"
        },
        {
          "modality": "text",
          "value": "Wires must be carefully routed with precise right-angle bends"
        },
        {
          "modality": "text",
          "value": "Sharp bends must be avoided"
        },
        {
          "modality": "text",
          "value": "Common grounds must be avoided"
        }
      ],
      "correctIndex": 2,
      "explanation": "Sharp bends must be avoided in grounding conductors for lightning protection.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "9gox8z1ix0dpz"
    },
    {
      "id": "ot-ht-l15-t0b08",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which is a proper grounding method for a tower?"
      },
      "options": [
        {
          "modality": "text",
          "value": "A single four-foot ground rod, driven into the ground no more than 12 inches from the base"
        },
        {
          "modality": "text",
          "value": "A ferrite-core RF choke connected between the tower and ground"
        },
        {
          "modality": "text",
          "value": "A connection between the tower base and a cold-water pipe"
        },
        {
          "modality": "text",
          "value": "Separate eight-foot ground rods for each tower leg, bonded to the tower and each other"
        }
      ],
      "correctIndex": 3,
      "explanation": "Separate eight-foot rods at each tower leg, bonded to the tower and each other, are a proper method. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "jw4c1k1ayx9e2"
    },
    {
      "id": "ot-ht-l15-t0b11",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following establishes grounding requirements for an amateur radio tower or antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "FCC Part 97 rules"
        },
        {
          "modality": "text",
          "value": "Local electrical codes"
        },
        {
          "modality": "text",
          "value": "FAA tower lighting regulations"
        },
        {
          "modality": "text",
          "value": "UL recommended practices"
        }
      ],
      "correctIndex": 1,
      "explanation": "Local electrical codes set tower grounding requirements, not Part 97, Federal Aviation Administration (FAA) lighting rules, or Underwriters Laboratories (UL) practices. FCC stands for Federal Communications Commission.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "swo20g1n4mqws"
    },
    {
      "id": "ot-ht-l15-t0b05",
      "shape": "mcq",
      "tags": [
        "safety",
        "antennas"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the purpose of a safety wire through a turnbuckle used to tension guy lines?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Secure the guy line if the turnbuckle breaks"
        },
        {
          "modality": "text",
          "value": "Prevent loosening of the turnbuckle from vibration"
        },
        {
          "modality": "text",
          "value": "Provide a ground path for lightning strikes"
        },
        {
          "modality": "text",
          "value": "Provide an ability to measure for proper tensioning"
        }
      ],
      "correctIndex": 1,
      "explanation": "The safety wire prevents loosening of the turnbuckle from vibration. It is not a backup, ground path, or tension gauge.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1qifidw1f9jfr6"
    },
    {
      "id": "ot-ht-l15-t0c01",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "What type of radiation are radio signals?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Gamma radiation"
        },
        {
          "modality": "text",
          "value": "Ionizing radiation"
        },
        {
          "modality": "text",
          "value": "Alpha radiation"
        },
        {
          "modality": "text",
          "value": "Non-ionizing radiation"
        }
      ],
      "correctIndex": 3,
      "explanation": "Radio signals are non-ionizing radiation, unlike gamma or alpha radiation.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "mi73tvrlqh27"
    },
    {
      "id": "ot-ht-l15-t0c12",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "How does RF radiation differ from ionizing radiation (radioactivity)?"
      },
      "options": [
        {
          "modality": "text",
          "value": "RF radiation lacks enough energy to cause chemical changes in cells and damage DNA"
        },
        {
          "modality": "text",
          "value": "RF radiation can only be detected with an RF dosimeter"
        },
        {
          "modality": "text",
          "value": "RF radiation is limited in range to a few feet"
        },
        {
          "modality": "text",
          "value": "RF radiation is perfectly safe"
        }
      ],
      "correctIndex": 0,
      "explanation": "Radio frequency (RF) lacks the energy to cause chemical changes in cells and damage DNA, though it is not called perfectly safe.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1qr9grl1uo6rat"
    },
    {
      "id": "ot-ht-l15-t0c02",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "bands"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following bands has the lowest maximum permissible exposure for RF safety?"
      },
      "options": [
        {
          "modality": "text",
          "value": "3.5 MHz"
        },
        {
          "modality": "text",
          "value": "50 MHz"
        },
        {
          "modality": "text",
          "value": "440 MHz"
        },
        {
          "modality": "text",
          "value": "1296 MHz"
        }
      ],
      "correctIndex": 1,
      "explanation": "Of the listed bands, 50 MHz has the lowest maximum permissible exposure. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "j44a1b19m882n"
    },
    {
      "id": "ot-ht-l15-t0c05",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why do exposure limits vary with frequency?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Lower frequency RF fields have more energy than higher frequency fields"
        },
        {
          "modality": "text",
          "value": "Lower frequency RF fields do not penetrate the human body"
        },
        {
          "modality": "text",
          "value": "Higher frequency RF fields are transient in nature"
        },
        {
          "modality": "text",
          "value": "The human body absorbs more RF energy at some frequencies than at others"
        }
      ],
      "correctIndex": 3,
      "explanation": "Limits vary because the body absorbs more radio frequency (RF) energy at some frequencies than others.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "nuesel1bmrwg1"
    },
    {
      "id": "ot-ht-l15-t0c04",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "What factors affect the RF exposure of people near an amateur station antenna?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Frequency and power level of the RF field"
        },
        {
          "modality": "text",
          "value": "Distance from the antenna to a person"
        },
        {
          "modality": "text",
          "value": "Radiation pattern of the antenna"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Frequency and power, distance from the antenna, and antenna radiation pattern all affect exposure. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "aymqropldw9o"
    },
    {
      "id": "ot-ht-l15-t0c07",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "What hazard is created by touching an antenna during a transmission?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Electrocution"
        },
        {
          "modality": "text",
          "value": "RF burn to skin"
        },
        {
          "modality": "text",
          "value": "Exposure to ionizing radiation"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 1,
      "explanation": "Touching an antenna during transmission causes a radio frequency (RF) burn to skin, not electrocution or ionizing exposure.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "f5j63lxq18gt"
    },
    {
      "id": "ot-ht-l15-t0c03",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "How does the allowable power density for RF safety change if duty cycle changes from 100 percent to 50 percent?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It increases by a factor of 3"
        },
        {
          "modality": "text",
          "value": "It decreases by 50 percent"
        },
        {
          "modality": "text",
          "value": "It increases by a factor of 2"
        },
        {
          "modality": "text",
          "value": "There is no adjustment allowed for lower duty cycle"
        }
      ],
      "correctIndex": 2,
      "explanation": "Going from 100 percent to 50 percent duty cycle raises allowable power density by a factor of 2. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1gyyctn16yecjh"
    },
    {
      "id": "ot-ht-l15-t0c10",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "Why is duty cycle one of the factors used to determine safe RF radiation exposure levels?"
      },
      "options": [
        {
          "modality": "text",
          "value": "It affects the average exposure to radiation"
        },
        {
          "modality": "text",
          "value": "It affects the peak exposure to radiation"
        },
        {
          "modality": "text",
          "value": "It takes into account the antenna feed line loss"
        },
        {
          "modality": "text",
          "value": "It takes into account the thermal effects of the final amplifier"
        }
      ],
      "correctIndex": 0,
      "explanation": "Duty cycle matters because it affects the average exposure to radiation. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1b54nf41wkq0gy"
    },
    {
      "id": "ot-ht-l15-t0c11",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "operating"
      ],
      "prompt": {
        "modality": "text",
        "value": "What is the definition of duty cycle during the averaging time for RF exposure?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The difference between the lowest and highest power output of a transmitter"
        },
        {
          "modality": "text",
          "value": "The difference between the PEP and the average power output of a transmitter"
        },
        {
          "modality": "text",
          "value": "The percentage of time that a transmitter is transmitting"
        },
        {
          "modality": "text",
          "value": "The percentage of time that a transmitter is not transmitting"
        }
      ],
      "correctIndex": 2,
      "explanation": "Duty cycle is the percentage of time a transmitter is transmitting, not the time it is idle. RF stands for radio frequency and PEP stands for peak envelope power.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "1prbyitw3xyff"
    },
    {
      "id": "ot-ht-l15-t0c06",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following is an acceptable method to determine whether your station complies with FCC RF exposure regulations?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By calculation based on FCC OET Bulletin 65"
        },
        {
          "modality": "text",
          "value": "By calculation based on computer modeling"
        },
        {
          "modality": "text",
          "value": "By measurement of field strength using calibrated equipment"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 3,
      "explanation": "Office of Engineering and Technology (OET) Bulletin 65 calculation, computer modeling, and calibrated field-strength measurement are all acceptable.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "kfw0mgb1tfn4"
    },
    {
      "id": "ot-ht-l15-t0c09",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "rules"
      ],
      "prompt": {
        "modality": "text",
        "value": "How can you make sure your station stays in compliance with RF safety regulations?"
      },
      "options": [
        {
          "modality": "text",
          "value": "By informing the FCC of any changes made in your station"
        },
        {
          "modality": "text",
          "value": "By re-evaluating the station whenever an item in the transmitter or antenna system changes"
        },
        {
          "modality": "text",
          "value": "By making sure your antennas have low SWR"
        },
        {
          "modality": "text",
          "value": "By using only Underwriter Laboratories approved transmitting equipment"
        }
      ],
      "correctIndex": 1,
      "explanation": "Re-evaluating whenever an item in the transmitter or antenna system is changed keeps a station compliant. RF stands for radio frequency, FCC stands for Federal Communications Commission, and SWR stands for standing wave ratio.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "jivvmx1tmifb1"
    },
    {
      "id": "ot-ht-l15-t0c08",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Which of the following actions can reduce exposure to RF radiation?"
      },
      "options": [
        {
          "modality": "text",
          "value": "Relocate antennas"
        },
        {
          "modality": "text",
          "value": "Relocate the transmitter"
        },
        {
          "modality": "text",
          "value": "Increase the duty cycle"
        },
        {
          "modality": "text",
          "value": "All these choices are correct"
        }
      ],
      "correctIndex": 0,
      "explanation": "Relocating antennas can reduce exposure. Increasing duty cycle does not, since duty cycle affects average exposure. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "6yhz2190vqwg"
    },
    {
      "id": "ot-ht-l15-t0c13",
      "shape": "mcq",
      "tags": [
        "rf-exposure",
        "safety"
      ],
      "prompt": {
        "modality": "text",
        "value": "Who is responsible for ensuring that no person is exposed to RF energy above the FCC exposure limits?"
      },
      "options": [
        {
          "modality": "text",
          "value": "The FCC"
        },
        {
          "modality": "text",
          "value": "The station licensee"
        },
        {
          "modality": "text",
          "value": "Anyone who is near an antenna"
        },
        {
          "modality": "text",
          "value": "The local zoning board"
        }
      ],
      "correctIndex": 1,
      "explanation": "The station licensee is responsible for keeping everyone within the Federal Communications Commission (FCC) exposure limits. RF stands for radio frequency.",
      "source": {
        "label": "NCVEC Question Pool Committee — 2026–2030 Technician question pool",
        "url": "https://ncvec.org/index.php/2026-2030-technician-question-pool"
      },
      "uid": "10qu76s1g01aqk"
    }
  ],
  "videos": [
    {
      "id": "kp-ham-radio-technician_l01-rules-licensing_c1",
      "lessonId": "l01-rules-licensing",
      "title": "Technician Phone on High Frequency",
      "caption": "A Technician can use high frequency (HF) radio on a few segments. But how many of those bands allow phone?",
      "durationSec": 28.3,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c1.101a56a2.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c1.101a56a2.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c1.101a56a2.1080.mp4"
      },
      "youtubeId": "UeW3P0AkBNA",
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l01-rules-licensing_c2",
      "lessonId": "l01-rules-licensing",
      "title": "Expired License and the Grace Period",
      "caption": "Your amateur radio license expired yesterday. Can you still transmit while you renew it?",
      "durationSec": 28.82,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c2.c1b00b0f.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c2.c1b00b0f.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l01-rules-licensing_c2.c1b00b0f.1080.mp4"
      },
      "youtubeId": "A8Z8Mv8FFuA",
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l02-rules-operating_c1",
      "lessonId": "l02-rules-operating",
      "title": "When a Ham Station Can Skip Identifying",
      "caption": "Ham stations must give their call sign on the air. So when can a station skip it?",
      "durationSec": 28.2,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c1.4f06445f.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c1.4f06445f.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c1.4f06445f.1080.mp4"
      },
      "youtubeId": "PxcgcRVvN28",
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l02-rules-operating_c2",
      "lessonId": "l02-rules-operating",
      "title": "Tactical Calls and the Call Sign",
      "caption": "A station signs on as Race Headquarters and never gives its own call sign. Is that enough?",
      "durationSec": 29.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c2.22db3a0b.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c2.22db3a0b.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l02-rules-operating_c2.22db3a0b.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l03-operating-procedures_c1",
      "lessonId": "l03-operating-procedures",
      "title": "Repeater Offsets on Two Bands",
      "caption": "A repeater listens on one frequency and retransmits on another. How far apart are the two?",
      "durationSec": 28.16,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c1.27a6c3b4.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c1.27a6c3b4.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c1.27a6c3b4.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l03-operating-procedures_c2",
      "lessonId": "l03-operating-procedures",
      "title": "Emergencies Don't Switch Off the Rules",
      "caption": "In an emergency, do the amateur radio rules switch off at all?",
      "durationSec": 29.74,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c2.31ed9fda.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c2.31ed9fda.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l03-operating-procedures_c2.31ed9fda.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l04-radio-waves_c1",
      "lessonId": "l04-radio-waves",
      "title": "Move the Antenna, Change the Signal",
      "caption": "Move an antenna just a few feet, and a very high frequency signal can vary greatly.",
      "durationSec": 25,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c1.fc0184c7.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c1.fc0184c7.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c1.fc0184c7.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l04-radio-waves_c2",
      "lessonId": "l04-radio-waves",
      "title": "The Mode That Reaches Past the Horizon",
      "caption": "300 miles, over the horizon: how can a radio signal get that far?",
      "durationSec": 28.16,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c2.a132a3fd.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c2.a132a3fd.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l04-radio-waves_c2.a132a3fd.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l05-station-practices_c1",
      "lessonId": "l05-station-practices",
      "title": "Powering a Mobile Radio",
      "caption": "A typical fifty-watt mobile radio needs a power supply. What should that supply be rated?",
      "durationSec": 27.53,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c1.c00b64b3.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c1.c00b64b3.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c1.c00b64b3.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l05-station-practices_c2",
      "lessonId": "l05-station-practices",
      "title": "Hearing a Weak Signal",
      "caption": "A weak frequency modulated (FM) signal is on the air. The radio stays quiet, and nothing can be heard.",
      "durationSec": 26.23,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c2.906bb85d.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c2.906bb85d.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l05-station-practices_c2.906bb85d.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l06-electrical-basics_c1",
      "lessonId": "l06-electrical-basics",
      "title": "What Resistance Opposes",
      "caption": "3 kinds of current all meet the same opponent.",
      "durationSec": 27.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c1.9d9093e7.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c1.9d9093e7.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c1.9d9093e7.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l06-electrical-basics_c2",
      "lessonId": "l06-electrical-basics",
      "title": "Doubling Power in Decibels",
      "caption": "Imagine a radio's power doubles, from 5 watts to 10 watts. How many decibels does that add?",
      "durationSec": 26.24,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c2.a6f2a152.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c2.a6f2a152.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l06-electrical-basics_c2.a6f2a152.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l07-electrical-math_c1",
      "lessonId": "l07-electrical-math",
      "title": "Power From a 13.8 Volt Radio",
      "caption": "A radio on a 13.8 volt supply draws 10 amperes. How much power does it use?",
      "durationSec": 28.82,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c1.ab975573.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c1.ab975573.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c1.ab975573.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l07-electrical-math_c2",
      "lessonId": "l07-electrical-math",
      "title": "Finding Current With Ohm's Law",
      "caption": "Put 200 volts across a resistor of 100 ohms. How many amperes flow through it?",
      "durationSec": 30.61,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c2.0025395c.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c2.0025395c.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l07-electrical-math_c2.0025395c.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l08-components_c1",
      "lessonId": "l08-components",
      "title": "Rechargeable or Not",
      "caption": "Which common battery chemistry can never be recharged? Some can be recharged, and some cannot.",
      "durationSec": 29.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c1.612b902f.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c1.612b902f.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c1.612b902f.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l08-components_c2",
      "lessonId": "l08-components",
      "title": "Which Way Current Flows",
      "caption": "Which way does current have to flow for a light-emitting diode (LED) to light up?",
      "durationSec": 25.49,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c2.f034f493.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c2.f034f493.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l08-components_c2.f034f493.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l09-schematics_c1",
      "lessonId": "l09-schematics",
      "title": "What a Schematic Leaves Out",
      "caption": "A circuit diagram can draw a big part as a small symbol, and a long wire as a short line.",
      "durationSec": 25.36,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c1.14c71445.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c1.14c71445.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c1.14c71445.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l09-schematics_c2",
      "lessonId": "l09-schematics",
      "title": "Lowering 120 Volts in a Power Supply",
      "caption": "Which part takes 120 volts of alternating current and lowers its voltage?",
      "durationSec": 29.23,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c2.e7892d2e.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c2.e7892d2e.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l09-schematics_c2.e7892d2e.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l10-radios_c1",
      "lessonId": "l10-radios",
      "title": "Why a Broadcast Radio Picks Up a Ham",
      "caption": "Imagine an amateur station is on the air, and a broadcast radio picks up its signal. Nobody meant it to happen.",
      "durationSec": 29.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c1.dfb06160.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c1.dfb06160.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c1.dfb06160.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l10-radios_c2",
      "lessonId": "l10-radios",
      "title": "How a Transceiver Reaches Another Band",
      "caption": "A transceiver covers certain bands on its own. Could it work a band it does not cover?",
      "durationSec": 26.24,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c2.3fb9a946.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c2.3fb9a946.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l10-radios_c2.3fb9a946.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l11-measuring-testing_c1",
      "lessonId": "l11-measuring-testing",
      "title": "Why Transmitters Cut Their Own Power",
      "caption": "Why would a transmitter turn its own power down, even while it is still on the air?",
      "durationSec": 26.63,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c1.9a8a1336.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c1.9a8a1336.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c1.9a8a1336.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l11-measuring-testing_c2",
      "lessonId": "l11-measuring-testing",
      "title": "Which Setting Can Damage a Multimeter",
      "caption": "Which simple mistake can damage a multimeter when it is being used?",
      "durationSec": 25.81,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c2.a14f78d7.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c2.a14f78d7.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l11-measuring-testing_c2.a14f78d7.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l12-modes-satellites_c1",
      "lessonId": "l12-modes-satellites",
      "title": "Morse Code or Fast-Scan TV: Which Takes More Room?",
      "caption": "Which takes more room on a band: a Morse code signal, or a fast-scan TV signal?",
      "durationSec": 29.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c1.20212764.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c1.20212764.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c1.20212764.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l12-modes-satellites_c2",
      "lessonId": "l12-modes-satellites",
      "title": "Why Too Much Satellite Power Hurts Others",
      "caption": "More power is not always better on a satellite uplink.",
      "durationSec": 28.16,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c2.dd9aed2f.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c2.dd9aed2f.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l12-modes-satellites_c2.dd9aed2f.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l13-digital-modes_c1",
      "lessonId": "l13-digital-modes",
      "title": "Why Contest Stations Send Less",
      "caption": "In a radio contest, sending less can be the smarter move.",
      "durationSec": 29.74,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c1.4049b412.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c1.4049b412.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c1.4049b412.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l13-digital-modes_c2",
      "lessonId": "l13-digital-modes",
      "title": "How Radio Packets Fix Errors",
      "caption": "How does a digital radio message deal with an error on the way?",
      "durationSec": 26.23,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c2.858eb118.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c2.858eb118.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l13-digital-modes_c2.858eb118.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l14-antennas-feed-lines_c1",
      "lessonId": "l14-antennas-feed-lines",
      "title": "A 19-Inch Antenna on 2 Meters",
      "caption": "A 19-inch vertical antenna is often used on 2 meters. Why does such a short antenna work?",
      "durationSec": 29.01,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c1.4854c12f.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c1.4854c12f.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c1.4854c12f.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l14-antennas-feed-lines_c2",
      "lessonId": "l14-antennas-feed-lines",
      "title": "When Your Standing Wave Ratio Jumps Around",
      "caption": "Your standing wave ratio, usually called S-W-R, keeps jumping around.",
      "durationSec": 28.3,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c2.bb900f88.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c2.bb900f88.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l14-antennas-feed-lines_c2.bb900f88.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l15-safety_c1",
      "lessonId": "l15-safety",
      "title": "Stored Charge After Switch-Off",
      "caption": "You switch off a power supply and assume it is safe to open. It isn't, not yet.",
      "durationSec": 28.82,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c1.00b7d62e.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c1.00b7d62e.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c1.00b7d62e.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    },
    {
      "id": "kp-ham-radio-technician_l15-safety_c2",
      "lessonId": "l15-safety",
      "title": "The Helper Rule for Tower Climbs",
      "caption": "Could you climb a tower alone, if the job is small? Never. Not without a helper.",
      "durationSec": 25.81,
      "poster": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c2.5c545ae3.jpg",
      "sources": {
        "720": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c2.5c545ae3.720.mp4",
        "1080": "https://cdn.recurxive.com/packs/ham-radio-technician/videos/kp-ham-radio-technician_l15-safety_c2.5c545ae3.1080.mp4"
      },
      "youtubeId": null,
      "captionsBurnedIn": true
    }
  ],
  "podcasts": [
    {
      "id": "ham-radio-technician_lesson-1",
      "lessonId": "l01-rules-licensing",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: The Rules: Licenses, Bands and Call Signs",
      "durationSec": 476.8,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-1.1f8ebeb2.mp3",
      "bytes": 7629888
    },
    {
      "id": "ham-radio-technician_lesson-2",
      "lessonId": "l02-rules-operating",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: The Rules: Operating a Station",
      "durationSec": 425.6,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-2.f93a8dbd.mp3",
      "bytes": 6809853
    },
    {
      "id": "ham-radio-technician_lesson-3",
      "lessonId": "l03-operating-procedures",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Operating Procedures",
      "durationSec": 420.2,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-3.3fb65c31.mp3",
      "bytes": 6724171
    },
    {
      "id": "ham-radio-technician_lesson-4",
      "lessonId": "l04-radio-waves",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: How Radio Waves Travel",
      "durationSec": 431.3,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-4.4e49a12f.mp3",
      "bytes": 6901804
    },
    {
      "id": "ham-radio-technician_lesson-5",
      "lessonId": "l05-station-practices",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Setting Up and Running a Station",
      "durationSec": 410.9,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-5.1ca20a24.mp3",
      "bytes": 6575795
    },
    {
      "id": "ham-radio-technician_lesson-6",
      "lessonId": "l06-electrical-basics",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Electrical Principles: Current, Voltage and Units",
      "durationSec": 397.6,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-6.74c0d294.mp3",
      "bytes": 6362218
    },
    {
      "id": "ham-radio-technician_lesson-7",
      "lessonId": "l07-electrical-math",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Electrical Principles: Impedance, Power and Ohm's Law",
      "durationSec": 465.3,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-7.2b374451.mp3",
      "bytes": 7445986
    },
    {
      "id": "ham-radio-technician_lesson-8",
      "lessonId": "l08-components",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Electronic Components: Parts and Semiconductors",
      "durationSec": 407.8,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-8.b5f93c16.mp3",
      "bytes": 6526476
    },
    {
      "id": "ham-radio-technician_lesson-9",
      "lessonId": "l09-schematics",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Electronic Components: Schematics and Circuits",
      "durationSec": 399.1,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-9.4f1d097c.mp3",
      "bytes": 6386878
    },
    {
      "id": "ham-radio-technician_lesson-10",
      "lessonId": "l10-radios",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Practical Circuits: Radios and Their Common Problems",
      "durationSec": 406,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-10.7718f598.mp3",
      "bytes": 6497637
    },
    {
      "id": "ham-radio-technician_lesson-11",
      "lessonId": "l11-measuring-testing",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Practical Circuits: Measuring and Testing",
      "durationSec": 378.4,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-11.24f682cf.mp3",
      "bytes": 6056272
    },
    {
      "id": "ham-radio-technician_lesson-12",
      "lessonId": "l12-modes-satellites",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Signals and Emissions: Modes and Satellites",
      "durationSec": 442.8,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-12.5c23bd48.mp3",
      "bytes": 7085706
    },
    {
      "id": "ham-radio-technician_lesson-13",
      "lessonId": "l13-digital-modes",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Signals and Emissions: Contests, Linking and Digital Modes",
      "durationSec": 424,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-13.4d2c9420.mp3",
      "bytes": 6784775
    },
    {
      "id": "ham-radio-technician_lesson-14",
      "lessonId": "l14-antennas-feed-lines",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Antennas and Feed Lines",
      "durationSec": 409,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-14.a6357fc1.mp3",
      "bytes": 6545284
    },
    {
      "id": "ham-radio-technician_lesson-15",
      "lessonId": "l15-safety",
      "title": "FlashFeed Study Notes — Ham Radio Technician License: Safety",
      "durationSec": 426.4,
      "url": "https://cdn.recurxive.com/podcasts/ham-radio-technician/ham-radio-technician_lesson-15.283b9eab.mp3",
      "bytes": 6824063
    }
  ]
}
